Fracture toughness of microplasma-sprayed hydroxyapatite coating by nanoindentation

International Journal of Applied Ceramic Technology

Volumn 8, Issue 3, 2011, Pages 572-590

  Dey, Arjun ^a   Mukhopadhyay, Anoop K ^a  

^a CSIR CENTRAL GLASS AND CERAMIC RESEARCH INSTITUTE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CROSS SECTION; HAP COATINGS; HIGH POROSITY; HYDROXYAPATITE COATING; LITERATURE DATA; MICRO-PLASMAS; NANOINDENTATION TECHNIQUES; NANOINDENTS;

APATITE; COATINGS; FRACTURE; HYDROXYAPATITE; METAMATERIALS; NANOINDENTATION; PLASMA DEVICES; PLASMA WAVES; SCANNING ELECTRON MICROSCOPY;

FRACTURE TOUGHNESS;

EID: 79955664141     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2010.02538.x     Document Type: Article

References (88)

1. A. Dey, A. K. Mukhopadhyay, S. Gangadharan, M. K. Sinha, and, D. Basu, " Characterization of Microplasma Sprayed Hydroxyapatite Coating," J. Therm. Spray Technol., 18 [4] 578-592 (2009).
2. A. Dey, A. K. Mukhopadhyay, S. Gangadharan, M. K. Sinha, and, D. Basu, " Development of Hydroxyapatite Coating by Microplasma Spraying," Mater. Manuf. Process., 24 [12] 1249-1258 (2009).
3. A. Dey, A. K. Mukhopadhyay, S. Gangadharan, M. K. Sinha, D. Basu, and, N. R. Bandyopadhyay, " Nanoindentation Study of Microplasma Sprayed Hydroxyapatite Coating," Ceram. Int., 35 [6] 2295-2304 (2009).
4. A. Dey, A. K. Mukhopadhyay, S. Gangadharan, M. K. Sinha, and, D. Basu, " Weibull Modulus of Nano-Hardness and Elastic Modulus of Hydroxyapatite Coating," J. Mater. Sci., 44 [18] 4911-4918 (2009).
5. D. He, Q. Zhao, L. Zhao, and, X. Sun, " Influence of Microplasma Spray Parameters on the Microstructure and Crystallinity of Hydroxyapatite Coatings," Chin. J. Mater. Res., 21 [6] 659-663 (2007).
6. L. Zhao, K. Bobzin, F. Ernst, J. Zwick, and, E. Lugscheider, " Study on the Influence of Plasma Spray Processes and Spray Parameters on the Structure and Crystallinity of Hydroxylapatite Coatings," Materialwiss. Werkstoff., 37 [6] 516-520 (2006). (Pubitemid 44012816)
7. S. Palmqvist, " Occurrence of Crack Formation During Vickers Indentation as a Measure of Toughness of Hard Materials," Arch. Eisenhuettenwes., 33 629-634 (1962).
8. A. G. Evans, B. R. Lawn, and, D. B. Marshall, " Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System," J. Am. Ceram. Soc., 63 [9-10] 574-581 (1980).
9. G. M. Pharr, " Measurement of Mechanical Properties by Ultra-Low Load Indentation," Mater. Sci. Eng. A, 253 [1] 151-159 (1998). (Pubitemid 128382708)
10. J. Malzbender, G. D. With, and, J. M. J. Toonder, " Elastic Modulus, Indentation Pressure and Fracture Toughness of Hybrid Coatings on Glass," Thin Solid Films, 366 [1-2] 139-149 (2000).
11. A. A. Volinsky, J. B. Vella, and, W. W. Gerberich, " Fracture Toughness, Adhesion and Mechanical Properties of Low-K Dielectric Thin Films Measured by Nanoindentation," Thin Solid Films, 429 [1] 201-210 (2003).
12. D. Casellas, J. Caro, S. Molas, J. M. Prado, and, I. Valls, " Fracture Toughness of Carbides in Tool Steels Evaluated by Nanoindentation, " Acta Mater., 55 [13] 4277-4286 (2007). (Pubitemid 46977804)
13. R. Hassan, A. A. Caputo, and, R. F. Bunshah, " Fracture Toughness of Human Enamel," J. Dent. Res., 60 [4] 820-827 (1981).
14. S. N. White, et al,., " Controlled Failure Mechanisms Toughen the Dentino-Enamel Junction Zone," J. Pros. Dent., 94 [4] 330-333 (2005).
15. L. P. Mullins, M. S. Bruzzi, and, P. E. McHugh, " Measurement of the Microstructural Fracture Toughness of Cortical Bone Using Indentation Fracture," J. Biomech., 40 [14] 3285-3288 (2007). (Pubitemid 47532107)
16. L. H. He, and, M. V. Swain, " Understanding the Mechanical Behaviour of Human Enamel from its Structural and Compositional Characteristics," J. Mech. Behav. Biomed. Mater., 1 [1] 18-29 (2008). (Pubitemid 47557530)
17. M. Wang, X. Y. Yang, K. A. Khor, and, Y. Wang, " Preparation and Characterization of Bioactive Monolayer and Functionally Graded Coatings," J. Mater. Sci. Mater. Med., 10 [5] 269-273 (1999). (Pubitemid 29234059)
18. L. Fu, K. A. Khor, and, J. P. Lim, " Yttria Stabilized Zirconia Reinforced Hydroxyapatite Coatings," Surf. Coat. Technol., 127 [1] 66-75 (2000). (Pubitemid 30369133)
19. L. Fu, K. A. Khor, and, J. P. Lim, " Processing, Microstructure and Mechanical Properties of Yttria Stabilized Zirconia Reinforced Hydroxyapatite Coatings," Mater. Sci. Eng. A, 316 [1-2] 46-51 (2001). (Pubitemid 32914329)
20. H. Li, K. A. Khor, and, P. Cheang, " Young's Modulus and Fracture Toughness Determination of High Velocity Oxy-Fuel-Sprayed Bioceramic Coatings," Surf. Coat. Technol., 155 [1] 21-32 (2002). (Pubitemid 34780921)
21. H. Li, K. A. Khor, and, P. Cheang, " Titanium Dioxide Reinforced Hydroxyapatite Coatings Deposited by High Velocity Oxy-Fuel (HVOF) Spray," Biomaterials, 23 [1] 85-91 (2002). (Pubitemid 33041344)
22. K. Balani, et al,., " Plasma-Sprayed Carbon Nanotube Reinforced Hydroxyapatite Coatings and Their Interaction With Human Osteoblasts In Vitro," Biomaterials, 28 [4] 618-624 (2007). (Pubitemid 44647448)
23. L. L. Hench, " Bioceramics," J. Am. Ceram. Soc., 81 [7] 1705-1733 (1998).
24. S. Kobayashi, W. Kawai, and, S. Wakayama, " The Effect of Pressure During Sintering on the Strength and the Fracture Toughness of Hydroxyapatite Ceramics," J. Mater. Sci. Mater. Med., 17 [11] 1089-1093 (2006). (Pubitemid 44835996)
25. K. A. Khor, Y. W. Gu, C. H. Quek, and, P. Cheang, " Plasma Spraying of Functionally Graded Hydroxyapatite/Ti-6Al-4V Coatings," Surf. Coat. Technol., 168 [2-3] 195-201 (2003). (Pubitemid 36447463)
26. S. W. K. Kweh, K. A. Khor, and, P. Cheang, " Plasma-Sprayed Hydroxyapatite (HA) Coatings with Flame-Spheroidized Feedstock: Microstructure and Mechanical Properties," Biomaterials, 21 [12] 1223-1234 (2000).
27. S. Zhang, Y. S. Wang, X. T. Zeng, K. A. Khor, W. Weng, and, D. E. Sun, " Evaluation of Adhesion Strength and Toughness of Fluoridated Hydroxyapatite Coatings," Thin Solid Films, 516 [16] 5162-5167 (2008). (Pubitemid 351707407)
28. W. C. Oliver, and, G. M. Pharr, " An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7 [6] 1564-1583 (1992).
29. R. Venkataraman, and, R. Krishnamurthy, " Evaluation of Fracture Toughness of as Plasma Sprayed Alumina-13 wt.% Titania Coatings by Micro-Indentation Techniques," J. Eur. Ceram. Soc., 26 [15] 3075-3081 (2006). (Pubitemid 44210477)
30. S. Zhang, D. Sun, Y. Fu, and, H. Du, " Toughness Measurement of Thin Films: A Critical Review," Surf. Coat. Technol., 198 [1-3] 74-84 (2005).
31. A. Dey, A. K. Mukhopadhyay, S. Gangadharan, M. K. Sinha, and, D. Basu, " Fracture Toughness of Micro-Plasma Sprayed HAP Coating by Nanoindentation," Proceedings of the Interquadrennial Conference of International Congress on Fracture, Bangalore, India, August 3-7. eds., B. K. Raghu Prasad, and, R. Narasimhan,. I. K. International Publishing House Pvt. Ltd., New Delhi, 217-219, 2008.
32. K. A. Gross, and, S. S. Samandari, " Revealing Mechanical Properties of a Suspension Plasma Sprayed Coating with Nanoindentation," Surf. Coat. Technol., 203 [20-21] 2995-2999 (2009).
33. D. Basu, C. Funke, and, R. W. Steinbrech, " Effect of Heat Treatment on Elastic Properties of Separated Thermal Barrier Coatings," J. Mater. Res., 14 [12] 4643-4650 (1999). (Pubitemid 30527699)
34. S. Guo, and, Y. Kagawa, " Effect of Thermal Exposure on Hardness and Young's Modulus of EB-PVD Yttria-Partially-Stabilized Zirconia Thermal Barrier Coatings," Ceram. Int., 32 [3] 263-270 (2006). (Pubitemid 43063482)
35. J. P. Singh, M. Sutaria, and, M. Feber, " Use of Indentation Technique to Measure Elastic Modulus of Plasma-Sprayed Zirconia Thermal Barrier Coating," Proceedings of 21st Annual Conference and Exposition on Composites, Advanced Ceramics, Materials and Structure, American Ceramic Society, Cocoa Beach, Florida, U.S.A., January 12-16, 1997.
36. J. B. Park, Biomaterials Science and Engineering, Plenum Press, New York, 1984.
37. K. A. Gross, and, S. S. Samandari, " Nano-Mechanical Properties of Hydroxyapatite Coatings with a Focus on the Single Solidified Droplet," J. Aus. Ceram. Soc., 43 [2] 98-101 (2007). (Pubitemid 351265966)
38. D. R. Dukino, and, M. V. Swain, " Comparative Measurement of Fracture Toughness with Berkovich and Vickers Indenters," J. Am. Ceram. Soc., 75 [12] 3299-3304 (1992).
39. A. Dey, and, A. K. Mukhopadhyay, " Anisotropy in Nano-Hardness of Microplasma Sprayed Hydroxyapatite Coating," Adv. Appl. Ceram., (2010), doi DOI: 10.1179/174367509X12608763921490, in press.
40. G. D. Quinn, and, R. C. Bradt, " On the Vicker' Indentation Fracture Toughness Test," J. Am. Ceram. Soc., 90 [3] 673-680 (2007). (Pubitemid 46384771)
41. J. Chen, and, S. J. Bull, " Assessment of the Toughness of Thin Films Using Nanoindentation Under Displacement Control," Thin Solid Films, 494 [1-2] 1-7 (2006). (Pubitemid 41659802)
42. J. Chen, and, S. J. Bull, " Indentation Fracture and Toughness Assessment for Thin Optical Coatings on Glass," J. Phys. D Appl. Phys., 40 [18] 5401-5417 (2007). (Pubitemid 47354022)
43. S. Neralla, D. Kumar, S. Yarmolenko, and, J. Sankar, " Mechanical Properties of Nanocomposite Metal-Ceramic Thin Films," Composites B, 35 [2] 157-162 (2004).
44. X. D. Li, and, B. Bhushan, " Measurement of Fracture Toughness of Ultra-Thin Amorphous Carbon Films," Thin Solid Films, 315 [1-2] 214-221 (1999).
45. 3 Ferroelectric Thin Films," Acta Mater., 51 [14] 3985-3997 (2003).
46. J. D. Toonder, J. Malzbender, G. D. With, and, R. Balkenende, " Fracture Toughness and Adhesion Energy of Sol-Gel Coatings on Glass," J. Mater. Res., 17 [1] 224-233 (2002). (Pubitemid 34574600)
47. E. D. Case, I. O. Smith, and, M. J. Baumann, " Microcracking and Porosity in Calcium Phosphates and the Implications for Bone Tissue Engineering," Mater. Sci. Eng. A, 390 [1-2] 246-225 (2005).
48. A. J. Ruys, M. Wei, C. C. Sorrell, M. R. Dickson, A. Brandwood, and, B. K. Milthorpe, " Sintering Effects on the Strength of Hydroxyapatite," Biomaterials, 16 [5] 409-415 (1995).
49. R. Halquani, D. B. Assolant, E. Champion, and, A. Ababou, " Microstructure and Related Mechanical Properties of Hot Pressed Hydroxyapatite Ceramics," J. Mater. Sci. Mater. Med., 5 [8] 563-568 (1994). (Pubitemid 24347377)
50. A. K. Mukhopadhyay, S. Gangadharan, and, D. Basu, " Micromechanical Characterization of Hydroxyapatite Coating for Metallic Implants," 1st Year Project (GAP 0216) Report submitted to Department of Science and Technology (DST), India, 2008.
51. F. Ren, E. D. Case, A. Morrison, M. Tafesse, and, M. J. Baumann, " Resonant Ultrasound Spectroscopy Measurement of Young's Modulus, Shear Modulus and Poisson's Ratio as a Function of Porosity for Alumina and Hydroxyapatite," Phil. Mag., 89 [14] 1163-1182 (2009).
52. B. Kundu, A. K. Mukhopadyay, A. Dey, S. Gangadharan, and, D. Basu, " Depth Sensitive Indentation Behaviour of Sintered HAP Compacts," Proceedings of International Workshop on Biomaterials and Biomedical Devices (BMD-06), Kolkata, India, December 12-13, 2006.
53. S. Nath, A. Dey, A. K. Mukhopadhyay, and, B. Basu, " Nanoindentation Response of Novel Hydroxyapatite-Mullite Composites," Mater. Sci. Eng. A, 513-514 197-201 (2009).
54. A. K. Mukhopadyay, et al,., " Micromechanical Characterization of Plasma Sprayed HAP Coating," Proceedings of International Workshop on Biomaterials and Biomedical Devices (BMD-06), Kolkata, India, December 12-13, 2006.
55. 2-HA Powders," J. Mater. Process. Technol., 140 [1-3] 420-425 (2003).
56. H. W. Kim, J. C. Knowles, L. H. Li, and, H. E. Kim, " Mechanical Performance and Osteoblast-Like Cell Responses of Fluorine-Substituted Hydroxyapatite and Zirconia Dense Composite," J. Biomed. Mater. Res., 72A [3] 258-268 (2005). (Pubitemid 40270996)
57. S. M. F. Asmus, S. Sakakura, and, G. Pezzotti, " Hydroxyapatite Toughened by Silver Inclusions," J. Compos. Mater., 37 [23] 2117-2129 (2003).
58. R. R. Kumar, and, M. Wang, " Modulus and Hardness Evaluations of Sintered Bioceramic Powders and Functionally Graded Bioactive Composites by Nano-Indentation Technique," Mater. Sci. Eng. A, 338 [1-2] 230-236 (2002). (Pubitemid 35353115)
59. C. Zhang, Y. Leng, and, J. Chen, " Elastic and Plastic Behavior of Plasma-Sprayed Hydroxyapatite Coatings on a Ti-6Al-4V Substrate," Biomaterials, 22 [11] 1357-1363 (2003).
60. Y. W. Gu, K. A. Khor, and, P. Cheang, " In Vitro Studies of Plasma-Sprayed Hydroxyapatite/Ti-6Al-4V Composite Coatings in Simulated Body Fluid (SBF)," Biomaterials, 24 [9] 1603-1611 (2003). (Pubitemid 36149736)
61. C. Y. Tang, P. S. Uskokovic, C. P. Tsui, D. Veljovic, R. Petrovic, and, D. Janackovic, " Influence of Microstructure and Phase Composition on the Nanoindentation Characterization of Bioceramic Materials Based on Hydroxyapatite," Ceram. Int., 35 [6] 2171-2178 (2009).
62. B. Chen, T. Zhang, J. Zhang, Q. Lin, and, D. Jiang, " Microstructure and Mechanical Properties of Hydroxyapatite Obtained by Gel-Casting Process," Ceram. Int., 34 [2] 359-364 (2008).
63. H. Landolt, and, R. Bornstein, Elektrische, Piezoelektrische, Pyroelektrische, Piezooptische, Elektrooptische Konstanten und Nichtlineare Dielektrische Suszeptibilitaten, Zahlenwerte und Funktionen aus Naturwissenschaften und Technik, Gruppe III, Bd. 11., Springer-Verlag, Berlin, 1979.
64. M. Akao, H. Aoki, and, K. Kato, " Mechanical Properties of Sintered Hydroxyapatite for Prosthetic Applications," J. Mater. Sci., 16 [3] 809-812 (1981). (Pubitemid 12504131)
65. G. D. With, H. V. Dijk, N. Hattu, and, K. Prijs, " Preparation, Microstructure and Mechanical Properties of Dense Polycrystalline Hydroxyapatite," J. Mater. Sci., 16 [6] 1592-1598 (1981). (Pubitemid 12502440)
66. I. Arita, D. Wilkinson, M. Mondragon, and, V. Castano, " Chemistry and Sintering Behaviour of Thin Hydroxyapatite Ceramics with Controlled Porosity," Biomaterials, 16 [5] 403-408 (1995).
67. M. D. Liu, " Preparation and Characterisation of Porous Hydroxyapatite Bioceramic via a Slip-Casting Route," Ceram. Int., 24 [6] 441-446 (1998).
68. E. Charriere, et al,., " Mechanical Characterization of Brushite and Hydroxyapatite Cements," Biomaterials, 22 [21] 2937-2945 (2001). (Pubitemid 32739251)
69. L. H. He, O. C. Standard, T. T. Y. Huang, B. A. Latella, and, M. V. Swain, " Mechanical Behaviour of Porous Hydroxyapatite," Acta Biomater., 4 [3] 577-586 (2008). (Pubitemid 351461284)
70. T. P. Hoepfner, and, E. D. Case, " The Influence of the Microstructure on the Hardness of Sintered Hydroxyapatite," Ceram. Int., 29 [6] 699-706 (2003).
71. C. E. Mancini, C.C Berndt, L. Sun, and, A. Kucuk, " Porosity Determinations in Thermally Sprayed Hydroxyapatite Coatings," J. Mater. Sci., 36 [16] 3891-3896 (2001). (Pubitemid 32820312)
72. T. G. Nieh, B. W. Choi, and, A. F. Jankowski, " Synthesis and Characterization of Porous Hydroxyapatite and Hydroxyapatite Coatings," Report submitted to Minerals, Metals, and Materials Society Annual Meeting and Exhibition, New Orleans, LA, U.S.A., 2001.
73. K. A. Khalil, H. Y. Kim, S. W. Kim, and, K. W. Kim, " Observation of Toughness Improvement of the Hydroxyapatite Bioceramics Densified Using High-Frequency Induction Heat Sintering," Int. J. Appl. Ceram. Technol., 4 [1] 30-37 (2007). (Pubitemid 46189574)
74. S. Ramesh, C. Y. Tan, S. B. Bhaduri, and, W. D. Teng, " Rapid Densification of Nanocrystalline Hydroxyapatite for Biomedical Applications," Ceram. Int., 33 [7] 1363-1367 (2007). (Pubitemid 47179866)
75. N. Thangamani, K. Chinnakali, and, F. D. Gnanam, " The Effect of Powder Processing on Densification, Microstructure and Mechanical Properties of Hydroxyapatite," Ceram. Int., 28 [4] 355-362 (2002). (Pubitemid 34405512)
76. G. Muralithran, and, S. Ramesh, " The Effects of Sintering Temperature on the Properties of Hydroxyapatite," Ceram. Int., 26 [2] 221-230 (2000). (Pubitemid 30555550)
77. S. Best, and, W. Bonfield, " Processing Behaviour of Hydroxyapatite Powders with Contrasting Morphology," J. Mater. Sci. Mater. Med., 5 [8] 516-521 (1994). (Pubitemid 24347370)
78. P. E. Wang, and, T. K. Chaki, " Sintering Behaviour and Mechanical Properties of Hydroxyapatite and Dicalcium Phosphate," J. Mater. Sci. Mater. Med., 4 [2] 150-158 (1993). (Pubitemid 23153227)
79. A. Slosarczyk, E. Stobierska, Z. Paskiewicz, and, M. Gawlicki, " Calcium Phosphate Materials Prepared from Precipitates with Various Calcium: Phosphorus Molar Ratios," J. Am. Ceram. Soc., 79 [10] 2539-2544 (1996). (Pubitemid 126551345)
80. S. Saber-Samandari, and, K. A. Gross, " Nanoindentation on the Surface of Thermally Sprayed Coatings," Surf. Coat. Technol., 203 [23] 3516-3520 (2009).
81. S. Saber-Samandari, and, K. A. Gross, " Nanoindentation Reveals Mechanical Properties within Thermally Sprayed Hydroxyapatite Coatings," Surf. Coat. Technol., 203 [12] 1660-1664 (2009).
82. P. J. Callus, and, C. C. Berndt, " Relationships between the Mode II Fracture Toughness and Microstructure of Thermal Spray Coatings," Surf. Coat. Technol., 114 [2-3] 114-128 (1999).
83. Y. C. Tsui, C. Doyle, and, T. W. Clyne, " Plasma Sprayed Hydroxyapatite Coatings on Titanium Substrates Part 1: Mechanical Properties and Residual Stress Levels," Biomaterials, 19 [22] 2015-2029 (1998).
84. Y. Yamada, and, R. Watanabe, " Effect of Dispersed Pores on Fracture Toughness of HAp/PSZ Composites," Scripta Mater., 34 [3] 387-393 (1996). (Pubitemid 126367914)
85. B. F. Sorensen, and, A. Horsewell, " Crack Growth Along Interfaces in Porous Ceramic Layers," J. Am. Ceram. Soc., 84 [9] 2051-2059 (2001). (Pubitemid 33670209)
86. Z. Y. Denga, J. She, Y. Inagaki, J.F Yang, T. Ohji, and, Y. Tanaka, " Reinforcement by Crack-Tip Blunting in Porous Ceramics," J. Eur. Ceram. Soc., 24 [7] 2055-2059 (2004). (Pubitemid 38193250)
87. R. K. Nalla, J. J. Kruzic, J. H. Kinney, and, R. O. Ritchie, " Effect of Aging on the Toughness of Human Cortical Bone: Evaluation by R-Curves," Bone, 35 [6] 1240-1246 (2004). (Pubitemid 40260389)
88. R. K. Nalla, J. J. Kruzic, and, R. O. Ritchie, " On the Origin of the Toughness of Mineralized Tissue: Microcracking or Crack Bridging," Bone, 34 [5] 790-798 (2004).