Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 1: Mechanical properties and residual stress levels

Biomaterials

Volumn 19, Issue 22, 1998, Pages 2015-2029

  Tsui, Y C ^a   Doyle, C ^b   Clyne, T W ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b PFIZER GLOBAL RESEARCH AND DEVELOPMENT   (United Kingdom)

Author keywords

Adhesion; Hydroxyapatite; Plasma spraying; Residual stresses; Young's modulus

Indexed keywords

ADHESION; CALCIUM COMPOUNDS; CRYSTAL MICROSTRUCTURE; PHOSPHATE COATINGS; PLASMA SPRAYING; POROSITY; RESIDUAL STRESSES; SPRAYED COATINGS; STRESS ANALYSIS; SURFACE ROUGHNESS; TENSILE TESTING; TITANIUM;

HYDROXYAPATITE COATINGS;

IMPLANTS (SURGICAL);

HYDROXYAPATITE; STEEL; TITANIUM; TUNGSTEN;

ADHESION; ARTICLE; BIOMECHANICS; COMPRESSION; CRYSTAL; ENVIRONMENTAL TEMPERATURE; MATHEMATICAL MODEL; PHYSICAL PHENOMENA; PLASMA; PRIORITY JOURNAL; STRENGTH; STRESS; TENSILE STRENGTH; YOUNG MODULUS;

ADHESIVENESS; ALLOYS; COATED MATERIALS, BIOCOMPATIBLE; DURAPATITE; MATHEMATICAL COMPUTING; MECHANICS; MICROSCOPY, ELECTRON, SCANNING; PARTICLE SIZE; TITANIUM;

EID: 0344558762     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0142-9612(98)00103-3     Document Type: Article

References (69)

1. [1] Geesink RGT, Groot KD, Klein CPAT. Bonding of bone to apatite-coated implants. J Bone Joint Surg 1988;70-B:17-22.
2. [2] Oonishi H, Yamamoto M, Ishimaru H, Tsuji E, Kushitani S, Aono M, Ukon Y. The effect of hydroxyapatite coating on bone growth into porous titanium alloy implants. J Bone Joint Surg 1989;71-B:213-6.
3. [3] Poulmaire D, Ducos M, Setti Y, Hypolite MP. Development of dental implants in titanium with HA coatings. In: Blum-Sandmeier S, Eschnauer H, Huber P, Nicoll AR, editors. Proc 2nd Plasma-Technik-Symp. Plasma-Technik AG 1991;3: 191-202.
4. [4] Matejka D, Palka V, Brezovsky M, Sebo P, Infner I, Pastorok M. Plasma coated composite intraosseous implants. In: Blum-Sandmeier S, Eschnauer H, Huber P, Nicoll AR, editors. Proc 2nd Plasma-Technik-Symp. Plasma-Technik AG 1991;3: 171-7.
5. [5] LeGeros RZ. Review paper: biodegradation and bioresorption of calcium phosphate ceramics. Clinical Mater 1993;14:65-88.
6. [6] Dalton JE, Cook SD. In vivo mechanical and histological characteristics of HA-coated implants vary with coating vendors. J Biomed Mater Res 1995;29:239-45.
7. [7] Klein CPAT, Patsa P, Wolke JGC, Blieck-Hogervorst JMAd, Groot Kd. Long-term in vivo study of plasma-sprayed coatings on titanium alloys of tetra-calcium phosphate, hydroxyapatite and α-tricalcium phosphate. Biomaterials 1994;15:146-50.
8. [8] Joshi SV, Srivastava MP, Pal A, Pal S. Plasma spraying of biologically derived hydroxyapatite on implantable materials. J Mater Sci Mater Med 1993;4:25-255.
9. [9] Lacefield WR. Hydroxyapatite coating. Ann NY Acad Sci 1988;523:72-80.
10. [10] Li TT, Lee JH, Kobayashi T, Aoki H. Hydroxyapatite coating by dipping method, and bone bonding strength. J Mater Sci Mater Med 1996;7:355-7.
11. [11] Ducheyne P, Raemdonck WV, Heughebaert JC, Heughebaert M. Structural analysis of hydroxyapatite coating on titanium. Biomaterials 1986;1986:97-103.
12. [12] Raemdonck WV, Ducheyne P, Meester PD. Auger electron spectroscopic analysis of hydroxyapatite coating on titanium. J Amer Ceram Soc 1984;63:381-4.
13. [13] Ong JL, Lucas LC. Post-deposition heat treatments for ion beam sputter deposited calcium phosphate coatings. Biomaterials 1994;15:337-41.
14. [14] Yoshinari M, Ohtsuka Y, Derand T. Thin Hydroxyapatite coating produced by the ion beam dynamic mixing method. Biomaterials 1994;15:529-35.
15. [15] Berndt CC, Haddad GN, Farmer AJD, Gross KA. Thermal spraying for bioceramic applications. Mater Forum 1990;14:161-73.
16. [16] Bortz SA, Onesto EJ. Flame-sprayed bioceramics. Amer Ceram Soc Bull 1975;52:898.
17. [17] Weinlaender MJB III, Kenney EB, Moy PK. Raman microprobe investigation of the calcium phosphate phases of three commerically available plasma-flame-sprayed hydroxyapatite-coated dental implants. J Mater Sci Mater Med 1992;3:397-401.
18. [18] Haman JD, Lucas LC, Crawmer D. Characterization of high velocity oxy-fuel combustion sprayed hydroxyapatite. Biomaterials 1995;16:226-37.
19. [19] Wolke JGC, Groot Kd, Kraak TG, Herlaar W, Blieck-Hogervorst JMAd. The characterization of hydroxylapatite coatings sprayed with VPS, APS and DJ systems. In: Bernecki TF, editor. Proc Thermal Spray Conf ASM Int 1991:481-90.
20. [20] Lin JHC, Liu ML, Ju CP. Structure and properties of hydroxyapatite-bioactive glass composites plasma sprayed on Ti-6A1-4V. J Mater Sci Mater Med 1994;5:279-83.
21. [21] Brossa F, Cigada A, Chiesa R, Paracchini L, Consonni C. Adhesion properties of plasma sprayed hydroxyapatite coatings for orthopaedic prostheses. Biomed Mater Eng 1993;3:127-36.
22. [22] Khur KA, Cheang P. Characterization of plasma sprayed hydroxyapatite powders and coatings. In: Berndt CC, Bernecki TF, editors. National Thermal Spray Conf ASM Int 1993:347-52.
23. [23] Gross KA, Berndt CC. In vitro testing of plasma-sprayed hydroxyapatite coatings. J Mater Sci Mater Med 1994;5:219-24.
24. [24] Wang BC, Chang E, Yang CY, Tu D, Tsai CH. Characteristics and osteoconductivity of three different plasma-sprayed hydroxyapatite coatings. Surf Coat Technol 1993;58:107-17.
25. [25] Radin SR, Ducheyne P. Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect on in vitro stability. J Mater Sci Mater Med 1992;3:33-42.
26. [26] Salsbury RL. Quality control of hydroxyapatite coatings: purity and crystallinity determinations. In: Bernecki TF, editor. National Thermal Spray Conf ASM Int 1991:471-3.
27. [27] Weng J, Liu XG, Li XD, Zhang XD. Intrinsic factors of apatite influencing its amorphization during plasma-spray coating. Biomaterials 1995;16:39-44.
28. [28] Berndt CC, Gross KA. Characteristics of hydroxylapatite biocoatings. In: Berndt CC, editor. Proc Int Thermal Spray Conf Exposition ASM 1992:465-70.
29. [29] McPherson R, Gane N, Bastow TJ. Structural characterisation of plasma sprayed hydroxylapatite coatings. J Mater Sci Mater Med 1995;6:327-34.
30. [30] Inadome T, Hayashi K, Nakashima Y, Tsumura H, Sugioka Y. Comparison of bone-implant interface shear strength of hydroxyapatite-coated and alumina-coated metal implants. J Biomed Mater Res 1995;29:19-24.
31. [31] Hayashi K, Inadome T, Tsumura H, Nakashima Y, Sugioka Y. Effect of surface roughness of hydroxyapatite-coated titanium on the bone-implant interface shear strength. Biomaterials 1994; 15:1187-91.
32. [32] Filliaggi MJ, Coombs NA, Pilliar RM. Characterization of the interface in the plasma-sprayed HA coating/Ti-6A1-4V implant System. J Biomed Mater Res 1991;25:1211-29.
33. [33] Evans SL, Lawes KR, Gregson PJ. Layered, adhesively bonded hydroxyapatite coatings for orthopaedic implants. J Mater Sci Mater Med 1994;5:495-9.
34. [34] Furness JAG. Thermal cycling creep of aluminium-based composites. PhD Thesis. University of Cambridge, 1991.
35. [35] Timoshenko SP, Gere, JM. Mechanics of materials. D. Van Nostrand Company, 1972.
36. [36] Kleer G, Schonholz R, Doll W, Sturlese S, Zacchetti N. Interface crack resistance of zirconia base thermal barrier coatings. In: Vincenzini P, editor. 7th CIMTEC World Ceramics Congress. Elsevier, 1990:329-38.
37. [37] Kuroda S, Clyne TW. The quenching stress in thermally sprayed coatings. Thin Solid Films 1991;200:49-66.
38. [38] Kuroda S, Clyne TW. The origin and quantification of the quenching stress associated with splat cooling during spray deposition. In: Eschenauer H, Huber P, Nicoll AR, Sandmeier S, edotors. 2nd Plasma Technik Symposium. Plasma Technik 1991; 3:273-84.
39. [39] Kuroda S, Fukushima T, Kitahara S. Generation mechanisms of residual-stresses in plasma-sprayed coatings. Vacuum 1990;41: 1297-9.
40. [40] Gill SC, Clyne TW. Investigation of residual stress generation during thermal spraying by continuous curvature measurement. Thin Solid Films 1994;250:172-80.
41. [41] Gill SC, Clyne TW. Thermomechanical modelling of the development of residual stress during thermal spraying. In: Eschenauer H, Huber P, Nicoll AR, Sandmeier S, editors. 2nd Plasma Technik Sym. Plasma Technik 1991;3:227-38.
42. [42] Gill SC, Clyne TW. Residual stress modelling and characterisation of thermally sprayed ceramic coatings. In: Vincenzini P editor. High performance ceramic films and coatings. Amsterdam: Elsevier, 1991:339-52.
43. [43] Gill SC, Clyne TW. Property data evaluation for the modelling of residual stress development during vacuum plasma spray deposition. In: Exner H, editor. 1st European Conf on Adv Mats Procs (Euromat '89). Deutsch Gesell f Metallk 1990;1: 1221-30.
44. [44] Kijima T, Tsutsumi M. Preparation and thermal properties of dense polycrystalline oxyhydroxyapatite. J Amer Ceram Soc 1979;62:455-60.
45. [45] Chaki TK, Wang PE. Densification and strengthening of silver-reinforced hydroxyapatite-matrix composite prepared by sintering. J Mater Sci Mater Mater Med 1994;5: 533-42.
46. [46] Toth JM, Hirthe WM, Hubbard WG, Brantley WA, Lynch KL. Determination of the ratio of HA/TCP mixtures by X-ray diffraction. J App Biomater 1991;2:37-40.
47. [47] Socrates G. Infrared characteristic group frequencies: table and charts. New York: Wiley, 1994.
48. [48] Whitehead RY, Lucas LC, Lacefield WR. The effect of dissolution on plasma sprayed hydroxylapatite coatings on titanium. Clin Mater 1993;12:31-9.
49. [49] Osaka A, Miura Y, Takeuchi K, Asada M, Takahashi, K. Calcium apatite prepared from calcium hydroxide and orthophosphoric acid. J Mater Sci Mater Med 1991;2:51-5.
50. [50] Brendel T, Engel A, Russel C. Hydroxyapatite coatings by a polymeric route. J Mater Sci Mater Med 1992;3:175-9.
51. [51] Eberhardt AW, Zhou C, Rigney ED. Bending and thermal stresses in a fatigue experiment of hydroxyapatite coated titanium rods. In: Berndt CC, Sampath S, editors. Proc 7th National Thermal Spray Conf ASM Int 1994:165-9.
52. [52] Jarcho M, Bolen CH, Thomas MB, Bobick J, Kay JF, Doremus RH. Hydroxylapatite synthesis and characterization in dense polycrystalline form. J Mater Sci 1976;11:2027-35.
53. [53] Akao M, Aoki H, Kato K. Mechanical properties of sintered hydroxyapatite for prosthetic applications. J Mater Sci 1981; 16:809-12.
54. [54] Howard SJ, Tsui YC, Clyne TW. The effect of residual stresses on the debonding of coatings. Part I. A model for delamination at a bimaterial interface. Acta Metall Mater 1994;42: 2823-36.
55. [55] Charalambides PG, Cao HC, Lund J, Evans AG. Development of a test method for measuring the mixed mode fracture resistance of bimaterial interfaces. Mech Mater 1990;8:269-83.
56. [56] Gross KA, Berndt CC. Optimization of spraying parameters for hydroxyapatite. In: Blum-Sandmeier S, Eschnauer H, Huber P, Nicoll AR, editors. Proc 2nd Plasma-Technik-Symp. Plasma-Technik AG 1991;3:159-70.
57. [57] Brandon JR, Taylor R. Phase stability of zirconia-based thermal barrier coatings. Part I. Zirconia-yttria alloys. Surf Coat Technol 1991;46:75-90.
58. [58] Yankee SJ, Pletka BJ, Salsbury RL. Quality control of hydroxylapatite coatings: the surface preparation stage. In: Bernecki TF, editor. Proc Int Thermal Spray Conf ASM 1991: 475-9.
59. [59] Rouquet N, Frayssinet P, Bonel G, Hanker JS, Hardy D, Guilhem A. Biochemical effects of calcium phosphate hydroxylapatite (HA) coatings on orthopaedic biomaterials. In: Blum-Sandmeier S, Eschnauer H, Huber P, Nicoll AR, editors. Proceedings of the 2nd Plasma-Technik-Symposium, Plasma-Technik AG 1991;3:203-9.
60. [60] Tsui YC, Clyne TW. Adhesion of thermal barrier coating systems and incorporation of an oxidation barrier layer. In: Berndt CC, editor. Thermal spray: practical solutions for engineering problems. ASM, Ohio: Materials Park, 1996: 275-84.
61. [61] Brown SR, Turner IG, Reiter H. Residual stress measurement in thermal sprayed hydroxyapatite coatings. J Mater Sci Mater Med 1994;5:756-9.
62. [62] Clyne TW, Tsui YC. The effect of intermediate layers on residual stress distributions and debonding of sprayed thermal barrier coatings. In: Ilschner B, editor. 3rd Int Symp on Structural and Functional Gradient Materials. PPUR 1994:129-36.
63. [63] Karapet'yants MK, Karapet'yants ML. Handbook of thermodynamic constants of inorganic and organic compounds. London: Ann Arbor - Humphrey Science Publishers, 1970.
64. [64] Parker VB, Wagman DD, Evans WH. Selected values of chemical thermodynamic properties: table for the alkaline earth elements. United States Department of Commerce, National Bureau of Standards, 1971.
65. [65] Willmann G. Mat Werkstofftechn 1992;23:107.
66. [66] Maruno S, Hayashi K, Sumi Y, Wang YF, Iwata H. CRC Handbook of bioactive ceramics. Yamamuro T, Hench LL, Wilson J, editors. Boca Raton: CRC Press, 1991:187-93.
67. [67] Tsui YC, Howard SJ, Clyne TW. Application of a model for the effect of residual stresses on debonding of coatings under applied loads. In: Vincenzini P, editor. Advances in inorganic films and coatings. Techna Srl 1995:19-26.
68. [68] Halouani R, Bernache-Assolant D, Champion E. Ababou A. Microstructure and related mechanical properties of hot pressed hydroxyapatite ceramics. J Mater Sci Mater Med 1994; 5:563-8.
69. [69] Best S, Bonfield W. Processing behaviour of hydroxyapatite powders with contrasting morphology. J Mater Sci Mater Med 1994;5:516-21.