Printed sensor and electric field assisted wetting on a natural fibre based substrate

Nordic Pulp and Paper Research Journal

Volumn 26, Issue 1, 2011, Pages 133-141

  Saarinen, Jarkko J ^a   Ihalainen, Petri ^a   Määttänen, Anni ^a   Bollström, Roger ^a   Peltonen, Jouko ^a  

^a ÅBO AKADEMI UNIVERSITY   (Finland)

Author keywords

Fibre; Printed functionality; Roughness; Sensing; Topographical characterization; Wetting

Indexed keywords

ELECTRIC FIELDS; FIBERS; NATURAL FIBERS; POLYANILINE; SURFACE ROUGHNESS; TEXTILE FIBERS;

ALL-PRINTED; CONDUCTIVE POLYANILINE; ETHYLENEDIOXYTHIOPHENES; POLYSTYRENE SULFONATE; PRINTED FUNCTIONALITY; PRINTED SENSORS; SENSING; SILVER ELECTRODE;

WETTING;

ELECTRIC FIELDS; ILLUMINATION; NATURAL FIBERS; PLASTIC FILMS; POLYMERS; TEXTILE FIBERS; WETTING;

EID: 79955417174     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2011-26-01-p133-141     Document Type: Article

References (44)

1. Andersson, P., Forchheimer, R., Tehrani, P. and Berggren, M. (2007): Printable all-organic electrochromic active-matrix displays, Adv. Funct. Mater. 17,3074-3082. (Pubitemid 350099936)
2. Bansai, R. (2003): Coming soon to a Wal-Mart near you, IEEE Antennas Propag. Mag., 45,105-106.
3. Barthlott, W. and Neinhuis, C. (1997): Purity of the sacred lotus, or escape from contamination in biological surfaces, Planta 202,1-8.
4. Berggren, M., Nilsson, D. and Robinson, N.D. (2007): Organic materials for printed electronics, Nature Mater. 6, 3-5.
5. Bollström, R., Määttänen, A., Tobjörk, D., Ihalainen, P., Kaihovirta, N., Österbacka, R., Toivakka, M. and Peltonen, J. (2009): A multilayer coated fiber-based substrate suitable for printed functionality, Org. Electron. 10,1020-1023.
6. Brabec, C.J., Sariciftci, N.S. and Hummelen, J.C. (2001): Plastic solar cells, Adv. Funct. Mater. 11,15-26.
7. Brunet, P., Eggers, J. and Deegan, R.D. (2007): Vibrationinduced climbing of drops, Phys. Rev. Lett. 99, 99,144501.
8. Bäcklund, T. G., Österbacka, R., Stubb, H., Bobacka, J. and Ivaska, A. (2005): Operating principle of polymer insulator organic thin-film transistors exposed to moisture, Appl. Phys. 98,074504.
9. Choi, S.-J, Suh, K.Y. and Lee, H.H. (2008): Direct UV-replica molding of biomimetic hierarchical structure for selective wetting, J. Am. Chem. Soc. 130,6312-6313.
10. Cooney, C.G., Chen, C.-Y., Emerling, M.R., Nadim, A. and Sterling, J.D. (2006): Electrowetting droplet microfluidics on a single planar surface, Microfluid Nanofluid 2,435-446.
11. Das, R. and Harrop, P. (2008): Printed & Organic Electronics Forecasts, Players & Opportunities 2008-2028, IDTechEx report 7.
12. de Crevoisier, G., Fabre, P., Corpart, J.-M. and Leibler, L. (1999): Switchable tackiness and wettability of a liquid crystalline polymer, Science 285,1246-1249.
13. Fortunato, E., Correia, N., Barquinha, P., Pereira, L., Gonçalves, G. and Martins, R. (2008): High-performance flexible hybrid field-effect transistors based on cellulose fiber paper, IEEE Electron Device Lett. 29,988-990.
14. Fu, Q., Rao, G.V.R., Basame, S.B., Keller, D.J., Artyushkova, K., Fulghum, J.E. and López, G.P. (2004): Reversible control of free energy and topography of nanostructured surfaces, J. Am. Chem. Soc. 126,8904-8905.
15. Gao, L. and McCarthy, T.J. (2006): The "Lotus effect" explained: Two reasons why two length scales of topography are important, Langmuir 22, 2966-2967.
16. Hubbe, M.A. (2007): Paper's resistance to wetting - A review of internal sizing chemicals and their effects, BioRes. 2,106-145.
17. Hunter, D. (1978): Papermaking - the history and technique of an ancient craft, Dover, New York.
18. Järnström, J., Ihalainen, P., Backfolk, K. and Peltonen, J. (2008): Roughness of pigment coatings and its influence on gloss, Appl. Surf. Sci. 254, 5741-5749.
19. Järnström, J., Ihalainen, P., Lemström, A., Toivakka, M. and Peltonen, J. (2009): The influence of different roughness scales of pigment coated papers on print gloss, Nord. Pulp Paper Res. J. 24,327-334.
20. Kaihovirta, N.J., Tobjörk, D., Mäkelä, T. and Österbacka, R. (2008): Absence of substrate roughness effects on an allprinted organic transistor operating at one volt, Appl. Phys. Lett. 93, 053302.
21. Kwon, Y.B., Weon, B.M., Won, K.H., Je, J.H., Hwu, Y. and Margaritondo, G. (2009): X-ray-induced changes in wettability, Langmuir 25, 1927-1929.
22. Lahann, J., Mitragotri, S., Tran, T.-N., Kaido, H., Sundaram, J., Choi, I.S., Hoffer, S., Somorjai, G.A. and Langer, R. (2003): A reversibly switching surface, Science 299,371-374.
23. Lim, H.S., Han, J.T., Kwak, D., Jin, M., Cho, K. (2006): Photoreversibly switchable superhydrophobic surface with erasable and rewritable pattern, J. Am. Chem. Soc. 128, 14458-14459.
24. Lin, Y.-J., Yang, F.-M. and Lin, C.-S. (2007): Effects of ultraviolet irradiation on energy band structure and conductivity of polyaniline, J. Appl. Phys. 102,103702.
25. Lippmann, G. (1875): Relationships between electrical and capillary phenomena, Ann. Chim. Phys. 5,494.
26. Martins, R., Barquinha, P., Pereira, L., Correia, N., Gonçalves, G., Ferreira, I. and Fortunato, E. (2008): Writeerase and read paper memory transistor, Appl. Phys. Lett. 93, 203501.
27. Matthews, J.R., Tuncel, D., Jacobs, R.M.J., Bain, C.D. and Anderson, H.L. (2003): Surfaces designed for charge reversal, J. Am. Chem. Soc. 125,6428-6433.
28. McHale, G., Shirtcliffe, N.J., Aqil, S., Perry, C.C. and Newton, M.I. (2004): Topography driven spreading, Phys. Rev. Lett. 93, 036102.
29. McHale, G. (2007): Surface wetting: Liquids shape up nicely, Nature Mater. 6,627-628.
30. Minko, S., Müller, M., Motornov, M., Nitschke, M., Grundke, K. and Stamm, M. (2003): Two-level structured self-adaptive surfaces with reversibly tunable properties, J. Am. Chem. Soc. 125, 3896-3900.
31. Mugele, F. and Baret, J.-C. (2005): Electrowetting: from basics to applications, J. Phys.: Condens. Matter 17, R705-R774.
32. Osman, M.A. and Keller, B.A. (1996): Wettability of native silver surfaces, Appl. Surf. Sci. 99,261-263.
33. Parker, A.R. and Lawrence, C.R. (2001): Water capture by a desert beetle, Nature 414,33-34.
34. Pelton, R. (2009): Bioactive paper provides a low-cost platform for diagnostics, Trends Anal. Chem. 28,925-942.
35. Peltonen, J., Jam, M., Areva, S., Linden, M. and Rosenholm, J.B. (2004): Topographical parameters for specifying a three-dimensional surface, Langmuir 20, 9428-9431.
36. Pykönen, M., Sundqvist, H., Järnström, J., Kaukoniemi, O.-V., Tuominen, M., Lahti, J., Peltonen, J., Fardim, P. and Toivakka, M. (2008): Effects of atmospheric plasma activation on surface properties of pigment-coated and surface-sized papers, Appl. Surf. Sci. 255,3217-3229.
37. Sangoi, R., Smith, C.G., Seymour, M.D., Venkataraman, J.N., Clark, D.M., Kleper, M.L. and Kahn, B.E. (2004): Printing radio frequency identification (RFID) tag antennas using inks containing silver dispersions, J. Disp. Sci. Technol. 25, 513-521.
38. Shibuichi, S., Onda, T., Satoh, N. and Tsujii, K. (1996): Super waterrepellent surfaces resulting from fractal structure, J. Phys. Chem. 100,19512-19517.
39. Siegel, A.C., Phillips, S.T., Wiley, B.J. and Whitesides, G.M. (2009): Thin, lightweight, foldable thermochromic displays on paper, Lab Chip 9,2775-2781.
40. Suter, R.B., Stratton, G.E. and Miller, P.R. (2004): Taxonomic variation among spiders in the ability to repel water: Surface adhesion and hair density, J. Arachnol. 32,11-21.
41. Wang, R., Hashimoto, K., Fujishima, A., Chikuni, M., Kojima, E., Kitamura, A., Shimohigoshi, M. and Watanabe, T. (1997): Light-induced amphiphilic surfaces, Nature 388, 431-432.
42. Wu, S.P., Yung, K.C., Xu, L.H. and Ding, X.H. (2008): Fabrication of polymer silver conductor using inkjet printing and low temperature sintering process, IEEE Trans. EI. Pack. Manuf. 31, 291-296.
43. Yager, P., Edwards, T., Fu, E., Helton, K., Nelson, K., Tam, M.R. and Weigl, B.H. (2006): Microfluidic diagnostic technologies for global public health, Nature 442,412-418.
44. Öner, D. and McCarthy, T.J. (2000): Ultrahydrophobic surfaces. Effects of topography length scales on wettability, Langmuir 16, 7777-7782.