Real-time FPGA-based hardware-in-the-loop simulation test bench applied to multiple-output power converters

IEEE Transactions on Industry Applications

Volumn 47, Issue 2, 2011, Pages 853-860

  Lucía, Óscar ^a   Urriza, Isidro ^a   Barragán, Luis A ^a   Navarro, Denis ^a   Jiménez, Óscar ^a   Burdío, José M ^a  

^a UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

Electromagnetic induction; field programmable gate arrays (FPGAs); modeling; resonant inverters

Indexed keywords

CURRENTS AND VOLTAGES; DESIGN FLOWS; EMBEDDED PROCESSORS; EMBEDDED SOFT-CORE PROCESSORS; FIELD-PROGRAMMABLE GATE ARRAYS (FPGAS); FPGA VENDORS; HARDWARE AND SOFTWARE; HARDWARE DESCRIPTION LANGUAGES; HARDWARE-IN-THE-LOOP SIMULATION; LOW-COST SOLUTION; MIXED-SIGNAL SIMULATION; MODELING; POWER CONVERTER CONTROL; PROGRAMMABLE CHIPS; REAL TIME SIMULATIONS; RESONANT INVERTERS; TIME-CONSUMING TASKS; WHOLE SYSTEMS;

COMPUTER DEBUGGING; COMPUTER HARDWARE DESCRIPTION LANGUAGES; COMPUTER SIMULATION; DIGITAL SIGNAL PROCESSORS; ELECTROMAGNETIC INDUCTION; EMBEDDED SOFTWARE; FIRMWARE; INDUCTANCE MEASUREMENT; LOGIC GATES; POWER CONVERTERS; PROGRAM DEBUGGING; SYNTHETIC APERTURES;

FIELD PROGRAMMABLE GATE ARRAYS (FPGA);

EID: 79952912036     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2010.2102997     Document Type: Article

References (30)

1. S. Sanchez-Solano, A. J. Cabrera, I. Baturone, F. J. Moreno-Velo, and M. Brox, "FPGA implementation of embedded fuzzy controllers for robotic applications," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1937-1945, Aug. 2007. (Pubitemid 47271266)
2. I. Urriza, L. A. Barragán, J. I. Artigas, J. Acero, D. Navarro, and J. M. Burdío, "Using mixed-signal simulation to design a digital power measurement system for induction heating home appliances," in Proc. IEEE Int. Symp. Ind. Electron., 2007, pp. 1447-1451.
3. A. M. Lienhardt, G. Gateau, and T. A. Meynard, "Digital sliding-mode observer implementation using FPGA," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1865-1875, Aug. 2007. (Pubitemid 47097235)
4. E. Monmasson and M. N. Cirstea, "FPGA design methodology for industrial control systems: A review," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1824-1842, Aug. 2007. (Pubitemid 47097232)
5. J. J. Rodriguez-Andina, M. J. Moure, and M. D. Valdes, "Features, design tools, and application domains of FPGAs," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1810-1823, Aug. 2007. (Pubitemid 47271262)
6. A. Bouscayrol, "Different types of hardware-in-the-loop simulation for electric drives," in Proc. IEEE Int. Symp. Ind. Electron., 2008, pp. 2146-2151.
7. Z. Weidong, S. Pekarek, J. Jatskevich, O. Wasynczuk, and D. Delisle, "A model-in-the-loop interface to emulate source dynamics in a zonal DC distribution system," IEEE Trans. Power Electron., vol. 20, no. 2, pp. 438-445, Mar. 2005. (Pubitemid 40535746)
8. G.W. Chang, Y. J. Liu, V. Dinavahi, and H. J. Su, "On real-time simulation for harmonic and flicker assessment of an industrial system with bulk nonlinear loads," IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 2998-3009, Sep. 2010.
9. A. Gebregergis and P. Pillay, "Implementation of fuel cell emulation on DSP and dSPACE controllers in the design of power electronic converters," IEEE Trans. Ind. Appl., vol. 46, no. 1, pp. 285-294, Jan./Feb. 2010.
10. S. Hasan and I. Husain, "A Luenberger-sliding mode observer for online parameter estimation and adaptation in high-performance induction motor drives," IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 772-781, Mar./Apr. 2009.
11. R. Wei, M. Steurer, and T. L. Baldwin, "Improve the stability and the accuracy of power hardware-in-the-loop simulation by selecting appropriate interface algorithms," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1286-1294, Jul./Aug. 2008.
12. R. Ruelland, G. Gateau, T. A. Meynard, and J. C. Hapiot, "Design of FPGA-based emulator for series multicell converters using co-simulation tools," IEEE Trans. Power Electron., vol. 18, no. 1, pp. 455-463, Jan. 2003.
13. C. Dufour, V. Lapointe, J. Belanger, and S. Abourida, "Hardware-in-theloop closed-loop experiments with an FPGA-based permanent magnet synchronous motor drive system and a rapidly prototyped controller," in Proc. IEEE Int. Symp. Ind. Electron., 2008, pp. 2152-2158.
14. L.-F. Pak, M. O. Faruque, X. Nie, and V. Dinavahi, "A versatile cluster-based real-time digital simulator for power engineering research," IEEE Trans. Power Syst., vol. 21, no. 2, pp. 455-465, May 2006.
15. S. Karimi, A. Gaillard, P. Poure, and S. Saadate, "FPGA-based realtime power converter failure diagnosis for wind energy conversion systems," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4299-4308, Dec. 2008.
16. G. G. Parma and V. Dinavahi, "Real-time digital hardware simulation of power electronics and drives," IEEE Trans. Power Del., vol. 22, no. 2, pp. 1235-1246, Apr. 2007. (Pubitemid 46566736)
17. O. Lucía, O. Jiménez, L. A. Barragán, I. Urriza, J. M. Burdío, and D. Navarro, "Real-time FPGA-based hardware-in-the-loop development test-bench for multiple output power converters," in Proc. IEEE Appl. Power Electron. Conf. Expo., 2010, pp. 309-314.
18. W. Fei, S.Wei, D. Boroyevich, S. Ragon, V. Stefanovic, andM. Arpilliere, "Voltage source inverter," IEEE Ind. Appl. Mag., vol. 15, no. 2, pp. 24-33, Mar./Apr. 2009.
19. O. Lucía, J. M. Burdío, L. A. Barragán, J. Acero, and I. Millán, "Series resonant multi-inverter for multiple induction heaters," IEEE Trans. Power Electron., vol. 25, no. 11, pp. 2860-2868, Nov. 2010.
20. J. Acero, J. M. Burdio, L. A. Barragan, D. Navarro, R. Alonso, J. Ramon, F. Monterde, P. Hernandez, S. Llorente, and I. Garde, "Domestic induction appliances," IEEE Ind. Appl. Mag., vol. 16, no. 2, pp. 39-47, Mar./Apr. 2010.
21. F. Forest, E. Labouré, F. Costa, and J.-Y. Gaspard, "Principle of a multi-load/single converter system for low power induction heating," IEEE Trans. Ind. Electron., vol. 15, no. 2, pp. 223-230, Mar. 2000.
22. O. Lucía, L. A. Barragán, J. M. Burdío, O. Jiménez, D. Navarro, and I. Urriza, "A versatile power electronics test-bench architecture applied to domestic induction heating," IEEE Trans. Ind. Electron., vol. 58, no. 3, pp. 998-1007, Mar. 2011.
23. J. G. Tong, I. D. L. Anderson, and M. A. S. Khalid, "Soft-core processors for embedded systems," in Proc. IEEE Int. Conf. Microelectron., 2006, pp. 170-173.
24. Y.-S. Kung and M.-H. Tsai, "FPGA-based speed control IC for PMSM drive with adaptive fuzzy control," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2476-2486, Nov. 2007. (Pubitemid 350154081)
25. O. Lucía, J. M. Burdío, I. Millán, J. Acero, and D. Puyal, "Load-adaptive control algorithm of half-bridge series resonant inverter for domestic induction heating," IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3106-3116, Aug. 2009.
26. P. C. Loh, F. Gao, and F. Blaabjerg, "Topological and modulation design of three-level Z-source inverters," IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2268-2277, Sep. 2008.
27. C. Fernandez, P. Zumel, M. Sanz, A. Lazaro, C. Lopez, and L. A. Barrado, "Fast prototyping of control circuits for power electronics based on FPGA," in Proc. IEEE IECON, 2006, pp. 1798-1803.
28. R. Naderi and A. Rahmati, "Phase-shifted carrier PWM technique for general cascaded inverters," IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1257-1269, May 2008. (Pubitemid 351756701)
29. R. Foley, R. Kavanagh, W. Marnane, and M. Egan, "Multiphase digital pulsewidth modulator," IEEE Trans. Power Electron., vol. 21, no. 3, pp. 842-846, May 2006.
30. IEEE Standard VHDL Language Reference Manual, IEEE Standard P1076, 2008.