Effects of the thermal conductivity of contact materials on elastohydrodynamic lubrication characteristics

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Volumn 224, Issue 12, 2010, Pages 2577-2587

  Kaneta, M ^a   Yang, P ^b  

^a KYUSHU KYORITSU UNIVERSITY   (Japan)

^b QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Compressive heating; Slide roll ratio; Thermal conductivity; Thermal elastohydrodynamic lubrication; Traction coefficient; Viscosity wedge action; Viscous heating

Indexed keywords

COMPRESSIVE HEATING; SLIDE-ROLL RATIO; THERMAL ELASTOHYDRODYNAMIC LUBRICATION; TRACTION COEFFICIENT; VISCOSITY WEDGE ACTION; VISCOUS HEATING;

ELASTOHYDRODYNAMICS; ELECTRIC CONTACTS; HEATING; MATERIALS; PRESSURE DISTRIBUTION; THERMAL CONDUCTIVITY; THERMAL CONDUCTIVITY OF LIQUIDS; THERMAL CONDUCTIVITY OF SOLIDS; TRACTION (FRICTION); VEHICLE WHEELS; VISCOSITY;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 79951659114     PISSN: 09544062     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544062JMES2146     Document Type: Article

References (35)

1. Dowson, D. and Higginson, G. R. Elastohydrodynamic lubrication, 1966 (Pergamon, Oxford).
2. Hamrock, B. J. and Dowson, D. Ball bearing lubrication, the elastohydrodynamics of elliptical contacts, 1981 (John Wiley & Sons, New York).
3. Gohar, R. Elastohydrodynamics, 2001 (Imperial College, London).
4. Zhu, D. and Wen, S. A full numerical solution for the thermoelastohydrodynamic problem in elliptical contact. Trans. ASME, J. Tribol., 1984, 106(2), 246-254. (Pubitemid 14590934)
5. Sadeghi, F. and Sui, P. C. Thermal elastohydrodynamic lubrication of rolling/sliding contacts. Trans. ASME, J. Tribol., 1990, 112(1), 189-195. (Pubitemid 20685842)
6. Yang, P. and Wen, S. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1990, 112(4), 631-636.
7. Kim, K. H. and Sadeghi, F. Three-dimensional temperature distribution in EHD lubrication, part II - point contact and numerical formulation. Trans. ASME, J. Tribol., 1993, 115(1), 36-45. (Pubitemid 23615732)
8. Lee, R.-T., Hsu, C.-H., and Kuo, W.-F. Multilevel solution for thermal elastohydrodynamic lubrication of rolling/sliding circular contacts. Tribol. Int., 1995, 28(8), 541-552.
9. Ma, M.-T. Effects of the non-Newtonian behaviour of lubricants on the temperature, traction, and film thickness in an elliptical EHD contact under heavy loads. Trans. ASME, J. Tribol., 1998, 120(4), 685-694. (Pubitemid 29134360)
10. Qu, S., Yang, P., and Guo, F. Theoretical investigation on the dimple occurrence in the thermal EHL of simple sliding steel-glass circular contact. Tribol. Int., 2000, 33, 59-65.
11. Yang, P., Qu, S., Kaneta, M., and Nishikawa, H. Formation of steady dimples in point TEHL contacts. Trans. ASME, J. Tribol., 2001, 123(1), 42-49. (Pubitemid 32696601)
12. Guo, F., Yang, P., and Qu, S. On the theory of thermal elastohydrodynamic lubrication at high slide-roll ratios - circular glass-steel contact solution at opposite sliding. Trans. ASME, J. Tribol., 2001, 123(4), 816-821. (Pubitemid 33023746)
13. Kim, H. J., Ehret, P., Dowson, D., and Taylor, C. M. Thermal elastohydrodynamic analysis of circular contacts. Part 2: non-Newtonian model. Proc. IMechE, Part J: J. Engineering Tribology, 2001, 215, 353-362. DOI: 10.1243/1350650011543592. (Pubitemid 32901644)
14. Liu, X., Jiang, M., Yang, P., and Kaneta, M. Non- Newtonian thermal analyses of point EHL contacts using the Eyring model. Trans. ASME, J. Tribol., 2005, 127(1), 70-81.
15. Habchi, W., Eyheramendy, D., Bair, S., Vergne, P., and Marales-Espejel, G. Thermal elastohydrodynamic lubrication of point contacts using a Newtonian/generalized Newtonian lubricant. Tribol. Lett., 2008, 30, 41-52.
16. Carli, M., Sharif, K. J., Ciulli, E., Evans, H. P., and Snidle, R. W. Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes. Tribol. Int., 2009, 42, 517-525.
17. Chang, L. A parametric analysis of the thermal shear localization in elastohydrodynamic lubrication films. Trans. ASME, J. Tribol., 2006, 128(1), 79-84.
18. Yagi, K., Kyogoku, K., and Nakahara, T. Experimental investigation of effects of slip ratio on elastohydrodynamic lubrication film related to temperature distribution in oil films. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 353-362. DOI: 10.1243/13506501 JET154. (Pubitemid 44151086)
19. Roeland s, C. J. A. Correlation aspects of viscositytemperature- pressure relationship of lubricating oils. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 1966.
20. Larsson, R., Larsson, P. O., Eriksson, E., Sjoeberg, M., and Hoeglund, E. Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses. Proc. IMechE, Part J: J. Engineering Tribology, 2000, 214, 17-27. DOI: 10.1243/1350650001542981.
21. Larsson, R. and and ersson, O. Lubricant thermal conductivity and heat capacity under high pressure. Proc. IMechE, Part J: J. Engineering Tribology, 2000, 214, 337-342. DOI: 10.1243/1350650001543223.
22. Kumar, P. and Khonsari, M. M. Traction in EHL line contacts using free-volume pressure-viscosity relationship with thermal and shear-thinning effects. Trans. ASME, J. Tribol., 2009, 131, 011503.
23. Venner, C. H. and Lubrecht, A. A. Multilevel methods in lubrication, 2000 (Elsevier, Amsterdam).
24. Kaneta, M. and Yang, P. Effects of thermal conductivity of contacting surfaces on point EHL contacts. Trans. ASME, J. Tribol., 2003, 125(4), 731-738. (Pubitemid 37353875)
25. Foord, C. A., Wedeven, L. D., Westlake, F. J., and Cameron, A. Optical elastohydrodynamics. Proc. Instn Mech. Engrs, Part 1, 1969/1970, 184(28), 487-505.
26. Kaneta, M., Shigeta, T., and Yang, P. Effects of compressive heating on traction force and film thickness in point EHL contacts. Trans. ASME, J. Tribol., 2005, 127(2), 435-442.
27. Cameron, A. The viscosity wedge. ASLE Trans., 1958, 1, 248-253.
28. Kaneta, M., Nishikawa, H., Kameishi, K., Sakai, T., and Ohno, N. Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1992, 114(1), 75-80.
29. Kaneta, M., Nishikawa, H., Kanada, T., and Matsuda, K. Abnormal phenomena appearing in EHL contacts. Trans. ASME, J. Tribol., 1996, 118(4), 886-892. (Pubitemid 126551625)
30. Yang, P., Kaneta, M., and Masuda, S. Quantitative comparisons between measured and solved EHL dimples in point contacts. Trans. ASME, J. Tribol., 2003, 125(1), 210-213.
31. Yagi, K., Kyogoku, K., and Nakahara, T. Relationship between temperature distribution in EHL film and dimple formation. Trans. ASME, J. Tribol., 2005, 127(3), 658-665.
32. Kaneta, M. and Yang, P. Formation mechanism of steady multi-dimples in thermal EHL point contacts. Trans. ASME, J. Tribol., 2003, 125(2), 241-251. (Pubitemid 36615161)
33. Kaneta, M. and Nishikawa, H. Formation of dimples in elliptical EHL contacts. InThinning films and tribological interfaces (Eds D. Dowson et al.), Proceedings of the 26th Leeds-Lyon Symposium on Tribology, Lyon, 1999, 2000, pp. 599-607 (Elsevier, Amsterdam). (Pubitemid 32949695)
34. Kaneta, M., Kawashima, R., Masuda, S., Nishikawa, H., Yang, P., and Wang, J. Thermal effects on the film thickness in elliptic EHL contacts with entrainment along the major contact axis. Trans. ASME, J. Tribol., 2002, 124(2), 420-427. (Pubitemid 34455563)
35. Kaneta, M., Shigeta, T., Hata, H., and Yang, P. Effects of the maximum Hertzian pressure on the maximum traction coefficient under EHL conditions. In Life cycle tribology (Eds D. Dowson et al.), Proceedings of the 31st Leeds-Lyon Symposium on Tribology, Leeds, 2004, 2005, pp. 231-237 (Elsevier, Amsterdam).