Effects of compressive heating on traction force and film thickness in point EHL contacts

Journal of Tribology

Volumn 127, Issue 2, 2005, Pages 435-442

  Kaneta, M ^a   Shigeta, T ^a   Yang, P ^b  

^a KYUSHU INSTITUTE OF TECHNOLOGY   (Japan)

^b QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

FILMS; NEWTONIAN FLOW; SURFACE PROPERTIES; THERMAL CONDUCTIVITY; TRACTION (FRICTION); VISCOSITY;

ATMOSPHERIC OIL VISCOSITY; FILM THICKNESS; NON-NEWTONIAN FLUIDS; SLIDE-ROLL RATIO;

ELASTOHYDRODYNAMIC LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 18644367273     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1843153     Document Type: Article

References (33)

1. Grubin, A. N., and Vinogradova, I. E., 1949, Investigation of the Contact of Machine Components, Book No. 30, Central Scientific Research Institute for Technology and Mechanical Engineering, Moscow.
2. Dowson, D., and Higginson, G. R., 1966, Elastohydrodynamic Lubrication, Pergamon, Oxford.
3. Gohar, R., and Cameron, A., 1967, "The Mapping of Elastohydrodynamic Contacts," ASLE Trans., 10, pp. 215-225.
4. Lubrecht, A. A., 1987, "The Numerical Solution of Elastohydrodynamically Lubricated Line and Point Contact Problem Using Multigrid Techniques," Ph.D, thesis, Twente University, Enschede, Netherlands.
5. Venner, C. H., 1991, "Multilevel Solution of the EHL Line and Point Contact Problems," Ph.D. thesis, Twente University, Enschede, Netherlands.
6. Qu, S., Yang, P., and Guo, F., 2000, "Theoretical Investigation on the Dimple Occurrence in the Thermal EHL of Simple Sliding Steel-Glass Circular Contacts," Tribol. Int., 33, pp. 59-65.
7. Yang, P., Qu, S., Kaneta, M., and Nishikawa, H., 2001, "Formation of Steady Dimples in Point TEHL Contacts," ASME J. Tribol., 123, pp. 42-49.
8. Kaneta, M., and Yang, P., 2003, "Formation Mechanism of Steady Multi-Dimples in Thermal EHL Point Contacts," ASME J. Tribol., 125, pp. 241-251.
9. Yang, P., Kaneta, M., and Masuda, S., 2003, "Quantitative Comparisons Between Measured and Solved EHL Dimples in Point Contacts," ASME J. Tribol., 125, pp. 210-214.
10. Kaneta, M., and Yang, P., 2003, "Effects of Thermal Conductivity of Contacting Surfaces on Point EHL Contacts," ASME J. Tribol., 125, pp. 731-738.
11. Crook, A. W., 1961, "The Lubrication of Rollers, III A Theoretical Discussion of Friction and the Temperatures in the Oil Film," Philos. Trans. A, 254, pp. 237-258.
12. Crook, A. W., 1963, "The Lubrication of Rollers, IV Measurements of Friction and Effective Viscosity," Philos. Trans. A, 255, pp. 281-312.
13. Johnson, K. L., and Cameron, R., 1967/1968, "Shear Behavior of Elastohydrodynamic Oil Films at High Rolling Contact Pressures," Proc. Inst. Mech. Eng., 182, Part 1, No. 14, pp. 307-319.
14. Ma, M.-T., 1998, "Effects of the Non-Newtonian Behavior of Lubricants on the Temperature, Traction, and Film Thickness in an Elliptical EHD Contact Under Heavy Loads," ASME J. Tribol., 120, pp. 685-694.
15. Sadeghi, F., and Sui, P. C., 1990, "Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Contacts," ASME J. Tribol., 112, pp. 189-195.
16. Kim, K.-H., and Sadeghi, F., 1992, "Three-Dimensional Temperature Distribution in EHD Lubrication: Part I-Circular Contact," ASME J. Tribol., 114, pp. 32-41.
17. Kim, K.-H., and Sadeghi, F., 1993, "Three-Dimensional Temperature Distribution in EHD Lubrication: Part II-Point Contact and Numerical Formulation," ASME J. Tribol., 115, pp. 32-41.
18. Sharif, K. J., Evans, H. P., Snidle, R. W., and Newall, J. P., 2004, "Modeling of Film Thickness and Traction in a Variable Ratio Traction Drive Rig," ASME J. Tribol., 126, pp. 92-104.
19. Foord, C. A., Wedeven, L. D., Westlake, F. J., and Cameron, A., 1969/ 1970, "Optical Elastohydrodynamics," Proc. Inst. Mech. Eng., 184, Part 1, No. 28, pp. 487-505.
20. Kaneta, M., 1999, "For the Establishment of a New EHL Theory," Proc. 25th Leeds-Lyon Symposium on Tribology, D. Dowson et al., eds., Tribology Series, 36, Elsevier, pp. 25-36.
21. Roelands, C. J. A., 1966, "Correlation Aspects of Viscosity-Temperature-Pressure Relationship of Lubricating Oils," Ph.D. thesis, Delft University of Technology, Netherlands.
22. Larsson, R., Larsson, P. O., Eriksson, E., Sjoberg, M., and Hoglund, E., 2000, "Lubricant Properties for Input to Hydrodynamic and Elastohydrodynamic Lubrication Analyses," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 214, pp. 17-27.
23. Bair, S., 2003, private communication.
24. Bair, S., 2001, "Measurements of Real Non-Newtonian Response for Liquid Lubricants Under Moderate Pressures," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 215, pp. 223-233.
25. Eyring, H., 1936, "Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates," J. Chem. Phys., 4, pp. 283-291.
26. Johnson, K. L., and Tevaarwerk, J. L., 1977, "Shear Behavior of EHD Oil Films," Proc. R. Soc. London, Ser. A, 356, pp. 215-236.
27. Bair, S., and Winer, W. O., 1979, "A Rheological Model for Elasohydrodynamic Contact Based on Primary Laboratory Data," ASME J. Tribol., 101, pp. 258-265.
28. Evans, C. R., and Johnson, K. L., 1986, "Regimes of Traction in Elastohydrodynamic Lubrication," Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci., 200, C5, pp. 313-324.
29. Evans, C. R., and Johnson, K. L., 1986, "The Rheological Properties of Elastohydrodynamic Lubricants," Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci., 200, C5, pp. 303-312.
30. Yang, P., and Wen, S., 1990, "A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamic Lubrication," ASME J. Tribol., 112, pp. 631-636.
31. Liu, X., 2002, "Analysis of the Thermal EHL of the Finite Line Contacts and Non-Newtonian Point Contacts," Master thesis, Qingdao Institute of Architecture and Engineering, Qingdao, China (in Chinese).
32. Greenwood, J. A., and Kauzlarich, J. J., 1973, "Inlet Shear Heating in Elastohydrodynamic Lubrication," ASME J. Lubr. Technol., 95, pp. 417-426.
33. Kim, H. J., Ehret, P., Dowson, D., and Taylor, C. M., 2001, "Thermal Elastohydrodynamic Analysis of Circular Contacts-Part 1: Newtonian Model," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 215, pp. 339-352.