Experimental investigation of effects of slip ratio on elastohydrodynamic lubrication film related to temperature distribution in oil films

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 220, Issue 4, 2006, Pages 353-363

  Yagi, Kazuyuki ^a,b   Kyogoku, K ^b   Nakahara, T ^b  

^a UNIVERSITÉ DE LYON   (France)

^b TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

Elastohydrodynamic lubrication; Film thickness; Temperature measurements; Thermal effects; Viscosity wedge action

Indexed keywords

LUBRICATING OILS; TEMPERATURE DISTRIBUTION; TEMPERATURE MEASUREMENT; THERMAL EFFECTS; THIN FILMS; VISCOSITY;

BALL-ON-DISC APPARATUS; FILM THICKNESS; SLIP RATIO; VISCOSITY WEDGE ACTION;

ELASTOHYDRODYNAMIC LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION; LUBRICATING OILS; TEMPERATURE DISTRIBUTION; TEMPERATURE MEASUREMENT; THERMAL EFFECTS; THIN FILMS; VISCOSITY;

EID: 33746599387     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET154     Document Type: Article

References (37)

1. Cheng, H. S. and Orcutt, F. K. A correlation between the theoretical and experimental results on the elastohydrodynamic lubrication of rolling and sliding contacts. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 1965-66, 180, 158-168.
2. Safa, M. M. A., Anderson, J. C., and Leather, J. A. Transducers for pressure, temperature and oil film thickness measurement in bearings. Sens. Actuators, 1982-83, 3, 119-128.
3. Kannel, J. W., Zugaro, F. F., and Dow, T. A. A method for measuring surface temperature between rolling/sliding steel cylinders. Trans. ASME J. Lubr. Technol., 1978, 100, 110-114.
4. Kannel, J. W. and Dow, T. A. The relation between pressure and temperature in rolling-sliding EHD contact. ASLE Trans., 1980, 23, 262-268.
5. Turchina, V., Sanborn, D. M., and Winer, W. O. Temperature measurements in sliding elastohydrodynamic point contacts. Trans. ASME J. Lubr. Technol., 1974, 96, 464-471.
6. Ausherman, V. K., Nagaraj, H. S., Sanborn, D. M., and Winer, W. O. Infrared temperature mapping in elastohydrodynamic lubrication. Trans. ASME J. Lubr. Technol., 1976, 98, 236-243.
7. Crook, A. W. The lubrication rollers I. Philos. Trans. R. Soc. Lond., Ser. A, 1958, 252, 387-409.
8. Cheng, H. S. and Sternlicht, B. A numerical solution for the pressure, temperature, and film thickness between two infinitely long, lubricated rolling and sliding cylinders, under heavy loads. Trans. ASME J. Basic Eng., 1965, 87, 695-707.
9. Cheng, H. S. A refined solution to the thermal-elastohydrodynamic lubrication of rolling and sliding cylinders. ASLE Trans., 1965, 8, 397-410.
10. Dowson, D. and Whitaker, A. V. A numerical procedure for the solution of the elastohydrodynamic problem of rolling and sliding contacts lubricated by a newtonian fluid. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 1965-66, 180, 57-71.
11. Greenwood, J. A. and Kauzlarich, J. J. Inlet shear heating in elastohydrodynamic lubrication. Trans. ASME J. Lubr. Technol., 1973, 95, 417-426.
12. Murch, L. E. and Wilson, W. R. D. A thermal elastohydrodynamic inlet zone analysis. Trans. ASME J. Lubr. Technol., 1975, 97, 212-216.
13. Wilson, W. R. D. and Shen, S. Effect of inlet shear heating due to sliding on elastohydrodynamic film thickness. Trans. ASME J Lubr. Technol., 1983, 105, 187-188.
14. Dalmaz, G. Film thickness and traction measurements in small elastohydrodynamic elliptical contacts. In Proceedings of the 5th Leeds-Lyon Symposium on Tribology, September 1978 (Eds D. Dowson et al.), 1979, pp. 71-80 (Mechanical Engineering Publications Limited, London).
15. Dalmaz, G. and Chaomleffel, J. P. Elastohydrodynamic lubrication of point contacts for various lubricants. In Proceedings of the 13th Leeds-Lyon Symposium on Tribology, September 1986, Elsevier Tribology Series (Eds D. Dowson et al.), 1987, vol. 11, pp. 207-218 (Elsevier, Amsterdam).
16. Brüggemann, H. and Kollmann, F. G. A numerical solution of the thermal elastohydrodynamic lubrication in an elliptical contact. Trans. ASME J. Lubr. Technol., 1982, 104, 392-400.
17. Yang, P. A. and Wen, S. Generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME J. Tribol., 1990, 112, 631-636.
18. Ma, M. T. An expedient approach to the non-Newtonian thermal EHL in heavily loaded point contacts. Wear, 1997, 206, 100-112.
19. Smeeth, H. and Spikes, H. The influence of slide/roll ratio on the film thickness of an EHD contact operating within the mixed lubrication regime. In Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, September 1995, Elsevier Tribology Series (Eds D. Dowson et al.), 1996, vol. 31, pp. 695-703 (Elsevier, Amsterdam).
20. Jubault, I., Molimard, J., Lubrecht, A. A., Monsot, J. L., and Vergne, P. In situ pressure and film thickness measurements in rolling/sliding lubricated contacts. Tribol. Lett., 2003, 15, 421-429.
21. Wang, S., Corny, T. F., and Cusano, C. Thermal non-Newtonian elastohydrodynamic lubrication of line contacts under simple sliding conditions. Trans. ASME J. Tribol., 1992, 114, 317-327.
22. Lee, R. T. and Hsu, C. H. Advanced multilevel solution for thermal elastohydrodynamic lubrication of simple sliding line contacts. Wear, 1994, 171, 227-237.
23. Kim, H. J., Ehret, P., Dowson, D., and Taylor, C. M. Thermal elastohydrodynamic analysis of circular contacts part 1: Newtonian model. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215, 339-352.
24. Kim, H. J., Ehret, P., Dowson, D., and Taylor, C. M. Thermal elastohydrodynamic analysis of circular contacts part 2: non-Newtonian model. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215, 353-362.
25. Foord, C. A., Wedeven, L. D., Westlake, F. J., and Cameron, A. Optical elastohydrodynamics. Proc. Instn Mech. Engrs, 1969-70, 184 (Part 1), 487-505.
26. Nagaraj, H. S., Sanborn, D. M., and Winer, W. O. Surface temperature measurements in rolling and sliding EHD contacts. ASLE Trans., 1979, 22, 277-285.
27. Wedeven, L. D. Discussion to Najaraj's paper. ASLE Trans., 1979, 22, 285.
28. Sanborn, D. M. and Winer, W. O. Fluid rheological effects in sliding elastohydrodynamic point contacts with transient loading: 1-film thickness. Trans. ASME J. Lubr. Technol., 1971, 93, 262-271.
29. Kaneta, M., Nishikawa, H., Kameishi, K., Sakai, T., and Ohno, N. Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication. Trans. ASME J. Tribol., 1992, 114, 75-80.
30. Sadeghi, F. and Sui, P. C. Thermal elastohydrodynamic lubrication of rolling/sliding contacts. Trans. ASME J. Tribol., 1990, 112, 189-195.
31. Yagi, K., Kyogoku, K., and Nakahara, T. Temperature measurements of both sliding surfaces and estimation of temperature profile across film thickness under EHL conditions (in Japanese). J. Jpn. Soc. Tribol., 2002, 47(4), 321-328.
32. Cameron, A. Hydrodynamic lubrication of rotating disks in pure sliding. A new type of oil film formation. J. Instn Petrol., 1951, 37, 471-486.
33. Cameron, A. The viscosity wedge. ASLE Trans., 1958, 1, 248-253.
34. Yagi, K., Kyogoku, K., and Nakahara, T. Relationship between temperature distribution in EHL film and dimple formation. Trans. ASME J. Tribol., 2005, 127, 658-665.
35. Wedeven, L. D. Optical measurements in elastohydrodynamic rolling-contact bearings. PhD Thesis, University of London, 1970.
36. Jaeger, J. C. Moving sources of heat and the temperature at sliding contacts. J. Proc. R. Soc. New South Wales, 1942, 76, 203-224.
37. Roelands, C. J. A., Vulgter, J. C., and Watermann, H. I. The viscosity temperature pressure relationship of lubricating oils and its correlation with chemical constitution. Trans. ASME J. Basic Eng., 1963, 85, 601-610.