Friction stir welded structural materials: Beyond Al-alloys

International Materials Reviews

Volumn 56, Issue 1, 2011, Pages 1-48

  Cam G ^a  

^a MUSTAFA KEMAL UNIVERSITY   (Turkey)

Author keywords

Friction stir welding; Grain refinement; Joining; Joint performance; Recrystallisation; Texture formation

Indexed keywords

ALUMINUM ALLOYS; COPPER ALLOYS; FRICTION; GRAIN REFINEMENT; JOINING; MAGNESIUM ALLOYS; METALLIC MATRIX COMPOSITES; RESEARCH LABORATORIES; TRIBOLOGY;

'CURRENT; AL-ALLOY; FRICTION STIR; FRICTION-STIR-WELDING; GRAINS REFINEMENT; JOINING; JOINT PERFORMANCE; RECRYSTALLISATION; STATE OF THE ART; TEXTURE FORMATION;

FRICTION STIR WELDING;

EID: 79551585654     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1179/095066010X12777205875750     Document Type: Review

References (244)

1. W. M. Thomas, E. D. Nicholas, J. C Needham, M. G. Murch, P. Temple-Smith and C J. Dawes: International Patent applica-tion no. PCT/GB92/02203 and GB Patent application No. 9125978·8 and US Patent application no. 5,460,317, December 1991.
2. W. M. Thomas and E. D. Nicholas: Mater. Des., 1997, 18, (4-6), 269-273.
3. C J. Dawes and W. M. Thomas: Weld. J., 1996, 75, (3), 41-45.
4. W. B. Lee, Y. M. Yeon and S. B. Jung: Mater. Sci Eng. A, 2003, A355, 154-159.
5. C G. Rhodes, M. W. Mahoney, W. H. Bingel, R. A. Spurling and C C Bampton: Scr. Mater., 1997, 36, (1), 69-75.
6. M. W. Mahoney, C G. Rhodes, J. G. Flintoff, R. A. Spurling and W. H. Bingel: Metall. Mater. Trans. A, 1998, 29A, (7), 1955-1964.
7. L. E. Murr, G. Liu and J. C McClure: J. Mater. Sci., 1998, 33, 1243-1251.
8. O. V. Flores, C Kennedy, L. E. Murr, D. Brown, S. Pappu, B. M. Nowak and J. C McClure: Scr. Mater., 1998, 38, (5), 703-708.
9. Y. S. Sato, H. Kokawa, M. Enomoto, S. Jogan and T. Hashimoto: Metall. Mater. Trans. A, 1999, 30A, (12), 3125-3130.
10. K. V. Jata and S. L. Semiatin: Scr. Mater., 2000, 43, (8), 743-749.
11. R. S. Mishra and Z. Y. Ma: Mater. Sci Eng. R, 2005, R50, (1-2), 1-78.
12. G. Çam and M. Koçak: 'Joining of advanced materials, area 6: materials science and engineering, Topic 6·36·4: Materials processing and manufacturing technologies', in 'Encyclopedia of life support systems', (ed. R. D. Rawlings), Oxford, Eolss Publishers, available at: http://www.eolss.net/.
13. A. von Strombeck, G. Çam, J. F. dos Santos, V. Ventzke and M. Koçak: 'A comparison between microstructure, properties, and toughness behavior of power beam and friction stir welds in Al-alloys', Proc. TMS 2001 Annu. Meet. on 'Aluminum, automotive and joining', 249-264; 2001, Warrendale, PA, TMS.
14. G. Çam: 'Recent developments in friction stir welding applica-tions', Makina Tek., 2007, 120, 48-58 (in Turkish).
15. R. Nandan, T. DebRoy and H. K. D. H. Bhadeshia: Prog. Mater. Sci., 2008, 53, (6), 980-1023.
16. P. L. Threadgill, A. J. Leonard, H. R. Shercliff and P. J. Withers: Int. Mater. Rev., 2009, 54, (2), 49-93.
17. P. L. Threadgill: Sci. Technol. Weld. Join., 2007, 12, (4), 357-360.
18. M. M. Attallah, C L. Davies and M. Strangwood: Sci Technol. Weld. Join., 2007, 12, (4), 361-369.
19. in 'Friction stir welding and processing', (ed. R. S. Mishra and M. W. Mahoney); 2007, Materials Park, OH, ASM International.
20. in 'Friction stir welding: from basics to applications', (ed. D. Lohwasser and Z. W. Chen); 2009, Abington, Cambridge, Woodhead Publishing Limited.
21. S. W. Kallee, J. Davenport and E. D. Nicholas: Weld. J., 2002, 81, (10), 47-50.
22. M. R. Johnsen: Weld. J., 1999, 78, (2), 35-39.
23. J. Ding, R. Carter, K. Lawless, A. Nunes, C Russel, M. Suits and J. Schneider: Weld. J., 2006, 85, (3), 54-59.
24. M. Yamamoto, A. Gerlich, T. H. North and K. Shinozaki: Sci Technol. Weld. Join., 2007, 13, (7), 583-592.
25. A. Gerlich, M. Yamamoto and T. H. North: Sci. Technol. Weld. Join., 2007, 12, (6), 472-480.
26. W. M. Thomas, K. I. Johnson and C S. Wiesner: Adv. Eng. Mater., 2003, 5, (7), 485-490.
27. J. Defalco: Weld. J., 2006, 85, (3), 42-44.
28. W. M. Thomas, D. J. Staines, E. R. Watts and I. M. Norris: 'The simultaneous use of two or more friction stir welding tools', Abington, Cambridge, TWI published on the Internet 13 January 2005.
29. G. Kohn, Y. Greenberg, I. Makover and A. Munitz: Weld. J., 2002, 81, (2), 46-48
30. P. Dong, F. Lu, J. K. Hong and Z. Cao: in Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
31. G. Liu, L. E. Murr, C.-S. Niou, J. C McClure and F. R. Vega: Scr. Mater., 1997, 37, (3), 355-361.
32. S. Benavides, Y. Li, L. E. Murr, D. Brown and J. C McClure: Scr. Mater., 1999, 41, (8), 809-815.
33. Z. Y. Ma, R. S. Mishra and M. W. Mahoney: Acta Mater., 2002, 50, 4419-4430.
34. Y. J. Kwon, N. Saito and I. Shigematsu: J. Mater. Sci Lett., 2002, 21, (19), 1473-1476.
35. Y. S. Sato, M. Urata and H. Kokowa: Metall. Mater. Trans. A, 2002, 33A, (3), 625-635.
36. Y. J. Kwon, I. Shigematsu and N. Saito: Mater. Trans., 2003, 44, (7), 1343-1350.
37. Y. J. Kwon, I. Shigematsu and N. Saito: Scr. Mater., 2003, 49 (8), 785-789.
38. J. Q. Su, T. W. Nelson and C J. Sterling: Mater. Sci Eng. A, 2005, A405, (1-2), 277-286.
39. C G. Rhodes, M. W. Mahoney, W. H. Bingel and M. Calabrese: Scr. Mater., 2003, 48, (10), 1451-1455.
40. W. M. Thomas, P. L. Threadgill and E. D. Nicholas: Sci Technol. Weld. Join., 1999, 4, (6), 365-372.
41. T. J. Lienert, W. L. Stellwag, B. B. Grimmett and R. W. Warke: Weld. J., 2003, 82, (1), 1s-9s.
42. A. P. Reynolds, W. Tang, M. Posada and J. DeLoach: Sci Technol. Weld. Join., 2003, 8, (6), 455-460.
43. P. J. Konkol, C J. A. Mathers, R. Johnson and J. R. Pickens: J. Ship Prod., 2003, 19, (3), 159-164.
44. A. Ozekcin, H. W. Jin, J. Y. Koo, N. V. Bangaru, R. Ayer, G. Vaughn, R. Steel and S. Packer: Int. J. Offshore Polar Eng., 2004, 14, (4), 284-288.
45. R. Ueji, H. Fujii, L. Cui, A. Nishioka, K. Kunishige and K. Nogi: Mater. Sci. Eng. A, 2006, A423, (1-2), 324-330.
46. H. Fujii, R. Ueji, Y. Takada, H. Kitahara, N. Tsuji, K. Nakata and K. Nogi: Mater. Trans., 2006, 47, (1), 239-242.
47. H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata and K. Nogi: Mater. Sci. Eng. A, 2006, A429, (1-2), 50-57.
48. L. Cui, H. Fujii, N. Tsuji and K. Nogi: Scr. Mater., 2007, 56, (7), 637-640.
49. H. S. Park, T. Kimura, T. Murakami, Y. Nagano, K. Nakata and M. Ushio: Mater. Sci Eng. A, 2004, A371, (1-2), 160-169.
50. G. Çam, H. T. Serindag, A. Çakan, S. Mistikoglu and H. Yavuz: Mat.-wiss. u. Werkstofftech., 2008, 39, (6), 394-399.
51. G. Çam, S. Mistikoglu and M. Pakdil: Weld. J., 2009, 88, (11), 225s-232s.
52. W. B. Lee and S. B. Jung: Mater. Lett., 2004, 58, (6), 1041-1046
53. in 'ASM handbook', Vol. 6, 'Welding, brazing and soldering', (ed. D. L. Olson et al.); 1993, Materials Park, OH, ASM International.
54. H. G. Warrington: Prog. Met. Phys., 1958, 2, 121-148.
55. F. H. Froes: Mater. Sci. Eng. A, 1994, A184, 119-133.
56. J. F. King: Mater. Sci. Technol., 2007, 23, 1-14.
57. in 'ASM special handbook: magnesium and magnesium alloys', 106-118; 1999, Materials Park, OH, ASM International.
58. S. H. C Park, Y. S. Sato and H. Kokowa: Scr. Mater., 2003, 49, (2), 161-166.
59. W. A. Baeslack III, S. J. Savage and F. H. Froes: J. Mater. Sci Lett., 1986, 5, 935-939.
60. A. Weisheit, R. Galun and B. L. Mordike: Weld. J., 1998, 77, (4), 149s-154s.
61. G. Chen, G. Roth and F. Maisenhalder: Laser Optoelektr., 1993, 25, (1), 43-47 (in German).
62. R. Johnson: 'Further assessment of the friction stir welding of magnesium alloys', TWI members report 766/2003, TWI, Abington, UK, 2003.
63. K. Nakata, S. Inoki, Y. Nagano, T. Hashimoto, S. Johgan and M. Ushio: Proc. 3rd Int. Symp. on 'Friction stir welding,' Kobe, Japan, September 2001, TWI.
64. W. B. Lee, J. W. Kim, Y. M. Yeon and S. B. Jung: Mater. Trans., 2003, 44, (5), 917-923.
65. W. B. Lee, Y. M. Yeon and S. B. Jung: Mater. Sci Technol., 2003, 19, (6), 785-790.
66. J. A. Esparza, W. C Davis, E. A. Trillo and L. E. Murr: J. Mater. Sci. Lett., 2002, 21, 917-920.
67. S. Mironov, Y. Motohashi, T. Ito, A. Goloborodko, K. Funarni and R. Kaibyshev: Mater. Trans. JIM, 2007, 48, (12), 3140-3148.
68. G. M. Xie, Z. Y. Ma, L. Geng and R. S. Chen: Mater. Sci Eng. A, 2007, A471, (1-2), 63-68.
69. M. A. Gharacheh, A. H. Kokabi, G. H. Daneshi, B. Shalchi and R. Sarrafi: Int. J. Mach. Tool Manuf., 2006, 46, 1983-1987.
70. N. Afrin, D. L. Chen, X. Cao and M. Jahazi: Mater. Sci. Eng. A, 2008, A472, (1-2), 179-186.
71. J.A. Esparza, W. C Davis and L. E. Murr: J. Mater. Sci., 2003, 38, (5), 941-952.
72. R. Johnson: Mater. Sci Forum, 2003, 419-424, 365-370.
73. L. Commin, M. Dumont, J.-E. Masse and L. Barrallier: Acta Mater., 2009, 57, 326-334.
74. R. P. Dobriyal, B. K. Dhindaw, S. Muthukumaran and S. K. Mukherjee: Mater. Sci. Eng. A, 2008, A477, (1-2), 243-249.
75. G. M. Xie, Z. Y. Ma and L. Geng: Mater. Sci Eng. A, 2008, A486, (1-2), 49-55.
76. X. H. Wang and K. S. Wang: Mater. Sci Eng. A, 2006, A431, (1-2), 114-117.
77. K. S. Wang, Y. Shen, X. R. Yang, X. H. Wang and K. W. Xu: Int. J. Iron Steel Res., 2006, 13, (4), 75-78.
78. H. Satoshi, O. Kazutaka, D. Masayuki, O. Hisanori, I. Masahisa and A. Yasuhisa: Q. J. Jpn. Weld. Soc., 2003, 21, 539-545.
79. S. H. C Park, Y. S. Sato and H. Kokowa: Metall. Mater. Trans. A, 2003, 34, (4), 987-994.
80. S. G. Lim, S. S. Kim, C.-G. Lee, C D. Yim and S. J. Kim: Metall. Mater. Trans. A, 2005, 36A, 1609-1612.
81. C Y. Lee, W. B. Lee, Y. M. Yeon and S. B. Jung: Mater. Sci Forum, 2005, 475-479, 555-558.
82. C I. Chang, C J. Lee and J. C Huang: Scr. Mater., 2004, 51, (6), 509-514.
83. W. S. Chang, H. J. Kim, J. S. Noh and H. S. Bang: Key Eng. Mater., 2006, 321-323, 1723-1728.
84. S. H. C Park, Y. S. Sato and H. Kokowa: Proc. 6th Int. Conf. on Trends in welding research', (ed. S. A. David et al.), 267; 2003, Materials Park, OH, ASM International.
85. D. Zhang, M. Suzuki and K. Maruyama: Scr. Mater., 2005, 52, (9), 899-903.
86. S. H. C Park, Y. S. Sato and H. Kokowa: J. Mater. Sci, 2003, 38, (21), 4379-4383.
87. W. Woo, H. Choo, M. B. Prime, Z. Feng and B. Clausen: Acta Mater., 2008, 56, 1701-1711.
88. N. Yamamoto, J. S. Liao and K. Nakata: J. Jpn Inst. Met., 2008, 72, (7), 538-543.
89. J. Yang, B. L. Xiao, D. Wang, and Z. Y. Ma: Mater. Sci. Eng. A, 2010, A527, 708-714
90. W. Woo, H. Choo, D. W. Brown, P. K. Liaw and Z. Feng: Scr. Mater., 2006, 54, 1859-1864.
91. X. Cao and M. Jahazi: Mater. Des., 2009, 30, 2033-2042.
92. S. M. Chowdhury, D. L. Chen, S. D. Bhole, X. Cao, E. Powidajko, D. C Weckman and Y. Zhou: Mater. Sci. Eng. A, 2010, A527, 2951-2961.
93. L. A. Cederqvist: in 'Materials Research Society symposium proceeding', Vol. 807,' Scientific basis for nuclear waste manage-ment XXVII', 477-482; 2004, Warrendale, PA, Materials Research Society.
94. C G. Andersson, R. E. Andrews, B. G. I. Dance, M. J. Russel and E. J. Olden: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
95. L. A. Cederqvist and R. E. Andrews: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
96. T. Hautala and T. Tianien: Proc. 6th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 324; 2003, Materials Park, OH, ASM International.
97. L. Cederqvist and T. Oberg: Reliab. Eng. Syst. Saf., 2008, 93, 1491-1499.
98. L. Cederqvist, C D. Sorensen, A. P. Reynolds and T. Oberg: Sci Technol. Weld. Join., 2009, 14, (2), 178-184.
99. K. Savolainen, J. Mononen, T. Saukkonen, H. Hänninen and J. Koivula: Proc. 5th Int. Symp. on 'Friction Stir Welding', Metz, France, September 2004, TWI, 19.
100. C Meran: Mater. Des., 2006, 27, (9), 719-726.
101. K. Okamoto, M. Doi, S. Hirano, K. Aota, H. Okamura, Y. Aono and T. C Ping: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
102. T. Sakthivel and J. Mukhopadhyay: J. Mater. Sci., 2007, 42, 8126-8129.
103. G. M. Xie, Z. Y. Ma and L. Geng: Scripta Mater., 2007, 57, (2), 73-76.
104. G. Çam and C Meran: 'Friction stir welding of copper and Cu-alloys', unpublished work, 2009.
105. H. J. Liu, J. J. Shen, Y. X. Huang, L. Y. Kuang, C Liu and C Li: Sci Technol. Weld. Join., 2009, 14, (6), 577-583.
106. C G. Andersson and R. E. Andrews: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
107. L. A. Cederqvist: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
108. G. M. Xie, Z. Y. Ma and L. Geng: Mater. Trans., 2008, 49, (7), 1698-1701.
109. G. M. Xie, Z. Y. Ma and L. Geng: Philos. Mag., 2009, 89, 1505-1516.
110. K. Oh-ishi, A. M. Cuevas, D. L. Swisher and T. R. McNelley: Mater. Sci Forum, 2003, 426-432, 2885-2890.
111. K. Oh-ishi and T. R. McNelley: Metall. Mater. Trans. A, 2004, 35A, 2951-2961.
112. K. Oh-ishi and T. R. McNelley: Metall. Mater. Trans. A, 2005, 36A, 1575-1585.
113. K. Oh-ishi, A. P. Zhilyaev and T. R. McNelley: Metall. Mater. Trans. A, 2006, 37A, 2239-2251.
114. T. R. McNelley, K. Ohishi and A. P. Zhilyaev: Mater. Sci Forum, 2007, 539-543, 3745-3750.
115. M. W. Mahoney, W. H. Bingel, S. R. Sharma and R. S. Mishra: Mater. Sci Forum, 2003, 426-432, 2843-2848.
116. M. D. Fuller, S. Swaminathan, A. P. Zhilyaev and T. R. McNelley: Mater. Sci Eng. A, 2007, A463, 128-137.
117. D. R. Ni, P. Xue, D. Wang, B. L. Xiao and Z. Y. Ma: Mater. Sci Eng. A, 2009, A524, 119-128.
118. D. R. Ni, B. L. Xiao, Z. Y. Ma, B. L. Xiao and Y. G. Zheng: Corros. Sci., 2010, 52, 1610-1617.
119. H. Fujii, L. Cui, M. Maeda and K. Nogi: Mater. Sci Eng. A, 2006, A419, 25-31.
120. P. L. Threadgill and R. Johnson: 'Progress in friction stir welding of steels', TWI technical report 815/2004, Great Abington, UK, 2004.
121. G. Çam and C Meran: 'Friction stir joining of steels', Mat.-wiss. u. Werkstofftech., submitted.
122. P. J. Konkol, C J. A. Mathers, R. Johnson and J. R. Pickens: Proc. 3rd Int. Symp.on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
123. A. P. Reynolds, M. Posada, J. Deloach, M. J. Skinner, J. Halpin and T. J. Lienert: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
124. T. J. Lienert and J. E. Gould: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
125. M. Posada, J. Deloach, A. P. Reynolds, M. J. Skinner and J. Halpin: in 'Friction stir welding and processing', (ed. K. V. Jata et al.), 159; 2001, Warrendale, PA,TMS.
126. M. Posada, J. Deloach, A. P. Reynolds and J. Halpin: Proc. 6th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 307-312; 2003, Materials Park, OH, ASM International.
127. C J. Sterling, T. W. Nelson, C D. Sorensen, R. J. Steel and S. M. Packer: in 'Friction stir welding and processing II', (ed. K. V. Jata et al.), 165-171; 2003, Warrendale, PA, TMS.
128. P. J. Konkol: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
129. Y. S. Sato, H. Yamanoi, H. Kokowa and T. Furuhara: Scr. Mater., 2007, 57, (6), 557-560.
130. W. Gan, Z. T. Li and S Khurana: Sci Technol. Weld. Join., 2007, 12, (7), 610-613.
131. S. H. C. Park, Y. S. Sato, H. Kokowa, K. Okamoto, S. Hirano and M. Inagaki: Scr. Mater., 2003, 49, (12), 1175-1180.
132. S. H. C Park, Y. S. Sato, H. Kokowa, K. Okamoto, S. Hirano and M. Inagaki: Scr. Mater., 2004, 51, (2), 101-105.
133. A. P. Reynolds, W. Tang, T. Gnaupel-Herold and H. Prask: Scr. Mater., 2003, 48, (9), 1289-1294.
134. Y. S. Sato, T. W. Nelson and C J. Sterling: Acta Mater., 2005, 53, (3), 637-645.
135. Y. S. Sato, T. W. Nelson, C J. Sterling, R. J. Steel and C.-O. Pettersson: Mater. Sci. Eng. A, 2005, A397, (1-2), 376-384.
136. P. Miao, G. R. Odette, J. Gould, J. Bernath, R. Miller, M. Alinger and C Zanis: J. Nucl. Mater., 2007, 367-370, 1197-1202.
137. C Meran, V. Kovan and A. Alptekin: Mat.-wiss. u. Werkstofftech., 2007, 38, (10), 829-835.
138. K. Okamoto and S. Hirano: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
139. T. Saeid, A. Abdollah-Zahed, H. Assadi and F. Malek Ghaini: Mater. Sci Eng. A, 2008, A496, (1-2), 262-268.
140. S. H. C Park, Y. S. Sato, H. Kokowa, K. Okamoto, S. Hirano and M. Inagaki: Sci. Technol. Weld. Join., 2005, 10, (5), 550-556.
141. S. Gourder, E. V. Konopleva, H. J. McQuenn and F. Montheillet: Mater. Sci Forum, 1996, 441, 217-222.
142. H. K. D. H. Bhadeshia and T. DebRoy: Sci Technol. Weld. Join., 2009, 14, (3), 193-196.
143. Y. C Chen, H. Fujii, T. Tsumura, Y. Kitagawa, K. Nakata, K. Ikeuchi, K. Matsubayashi, Y. Michishita, Y. Fujiya and J. Katoh: Sci Technol. Weld. Join., 2009, 14, (3), 197-201.
144. Y. S. Sato, N. Harayama, H. Kokowa, H. Inoue, Y. Tadokoro and S. Tsuge: Sci. Technol. Weld. Join., 2009, 14, (3), 202-209.
145. T. Weinberger, N. Enzinger and H. Cerjak: Sci Technol. Weld. Join., 2009, 14, (3), 210-215.
146. R. Ohashi, M. Fujimoto, S. Mironov, Y. S. Sato and H. Kokawa: Sci Technol. Weld. Join., 2009, 14, (3), 221-227.
147. M. P. Miles, T. W. Nelson, R. Steel, E. Olsen and M. Gallagher: Sci Technol. Weld. Join., 2009, 14, (3), 228-232.
148. Y. D. Chung, H. Fujii, R. Ueji and K. Nogi: Sci Technol. Weld. Join., 2009, 14, (3), 233-238.
149. G. Buffa and L. Fratini: Sci. Technol. Weld. Join., 2009, 14, (3), 239-246.
150. W. M. Thomas, C S. Wiesner, D. J. Marks and D. G. Staines: Sci Technol. Weld. Join., 2009, 14, (3), 247-253.
151. R. Nandan, G. G. Roy, T. J. Lienert and T. DebRoy: Acta Mater., 2007, 55, 883-895.
152. D. H. Choi, C Y. Lee, B. W. Ahn, J. H. Choi, Y. M. Yeon, K. Song, H. S. Park, Y. J. Kim, C D. Yoo and S. B. Jung: Int. J. Refract. Met. Hard Mater., 2009, 27, 931-936.
153. S. Heino: Metall. Mater. Trans. A, 2000, 31A, 1893-1904.
154. R. H. Bricknell and J. W. Edington: Acta Mater., 1991, 22, 2809.
155. R. Ohashi, M. Fujimoto, S. Mironov, Y. S. Sato and H. Kokowa: Sci Technol. Weld. Join., 2009, 14, (3), 221-227.
156. B. Heinz and B. Skrotzki: Metall. Mater. Trans. B, 2002, 33B, 489.
157. C-H. Choi and D. N. Lee: Metall. Mater. Trans. A, 1997, 28A, 2217.
158. H. J. McQueen and H. Z. Mecking: Metallkde, 1987, 78, 387.
159. H. Hu and S. R. Goodman: Mater. Sci. Eng., 1984, 67, 143
160. A. K. Lakshminarayanan and V. Balasubramanian: Mater. Des., 2010, 31, 4592-4600.
161. C D. Sorensen, T. W. Nelson and S. M. Packer: 'Material testing for FSW of high-temperature alloys', Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI
162. M. Collier, R. Steel, T. Nelson, C Sorensen and S. Packer: Mater. Sci Forum, 2003; 426-432, (4), 3011-3016.
163. B. M. Tweedy, W. Arbegast and C Allen: in 'Friction stir welding and processing III', (ed. K. V. Jata et al.), 97-104; 2005, Warrendale, PA, TMS
164. W. M. Thomas: Proc. 1st Int. Conf. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
165. O. Midling: 'Modified friction stir welding', International Patent application PCT/NO99/000042.
166. X. Long and S. K. Khanna: Sci. Technol. Weld. Join., 2005, 10, (4), 482-487.
167. C D. Sorensen and T. W. Nelson: Proc. 7th Int. Conf. on 'Trends in welding research', Pine Mountain, Georgia, USA. May 2005, ASM International.
168. J. R. Yang and L. C Chang: Mater. Sci Eng. A, 1997, A223, 158-167.
169. S. S. Babu and H. K. D. H. Bhadeshia: Mater. Sci Eng. A, 1992, A156, 1-9.
170. P. H. Shipway and H. K. D. H. Bhadeshia: Mater. Sci. Eng. A, 1995, A211, 1116-1128
171. M. J. Carr, J. R. Strife and G. S. Ansell: Metall. Trans. A, 1977, 8A, 1471-1484.
172. S. Chatterjee, H. S. Wang, J. R. Yang and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2006, 22, 641-644.
173. T. H. Chen and J. R. Yang: Mater. Sci. Eng. A, 2002, A338, 166-181.
174. H. Sieurin and R. Sandstrom: Mater. Sci Eng. A, 2007, A444, 271-276.
175. A. Mandal and P. J. Roy: Mater. Process. Technol., 2006, 180, 167-173.
176. H. T. Luckhoo, T. S. Jun and A. M. Korsunsky: Proc. Eng., 2009, 1, (1), 213-216
177. X. K. Zhuand Y. J. Chao: J. Mater. Process. Technol., 2004, 146, (2), 263-272.
178. S. J. Barnes, A. Steuwer, S. Mahawish, R. Johnson and P. J. Withers: Mater. Sci. Eng. A, 2008, A492, 35-44.
179. S. Pasta and A. P. Reynolds: Fatigue Fract. Eng. Mater. Struct., 2008, 31, (7), 569-580.
180. W. B. Lee, C Y. Lee, W. S. Chang, Y. M. Yeon and S. B. Jung: Mater. Lett., 2005, 59, (26), 3315-3318.
181. A. J. Ramirez and M. C Juhas: Mater. Sci. Forum, 2003, 426-434, 2999-3004.
182. R. John, K. V. Jata and K. Sadananda: Int. J. Fatigue, 2003, 25, (9-11), 939-948.
183. R. W. Fonda, K. E. Knipling, C R. Feng and D. W. Moon: in 'Friction stir welding and processing IV, 295-301; 2007, Warrandale, PA, TMS.
184. D. G. Sanders, M. Ramulu and P. D. Edwards: Mat.-wiss. u. Werkstofftech., 2008, 39, (4-5), 353-357.
185. Y. Zhang, Y. S. Sato, K. Kokowa, S. H. C Park and S. Hirano: Mater. Sci. Eng. A, 2008, A485, (1-2), 448-455.
186. S. Mironov, Y. Zhang, Y. S. Sato and H. Kokowa: Scr. Mater., 2008, 59, (1), 27-30.
187. T. J. Lienert, K. V. Jata, R. Wheeler and V. Seetharaman: Proc Conf. Joining of Advanced and Specialty Materials III, 160; 2001, Materials Park, OH, ASM International.
188. H. J. Liu, L. Zhou and Q. W. Liu: Mater. Des., 2010, 31, 1650-1655.
189. P. D. Edwards and M. Ramulu: Sci Technol. Weld. Join., 2009, 14, (5), 476-483.
190. L. Zhou, H. J. Liu, P. Liu and Q. W. Liu: Scr. Mater., 2009, 61, 596-599.
191. A. P. Reynolds, E. Hood and W. Tang: Scr. Mater., 2005, 52, (6), 491-494.
192. K. E. Knipling and R. W. Fonda: Scr. Mater., 2009, 60, 1097-1100.
193. T. J. Lienert and W. L. Stellwag Jr: 'Friction stir welding of Ti-6Al-4V alloys', EWI progress report PR0012, EWI, Columbus, OH, USA September 2000.
194. Y. Zhang, Y. S. Sato, K. Kokowa, S. H. C Park and S. Hirano: Mater. Sci. Eng. A, 2008, A488, (1-2), 25-30.
195. H. Fujii, Y. Sun, H. Kato and K. Nakata: Mater. Sci. Eng. A, 2010, A527, (1-2), 3386-3391.
196. S. Mironov, Y. S. Sato and H. Kokowa: Acta Mater., 2009, 57, 4519-4528.
197. H. J. Liu, L. Zhou and Q. W. Liu: Scr. Mater., 2009, 61, 1008-1011.
198. L. Zhou, H. J. Liu and Q. W. Liu: Mater. Des., 2010, 31, 2631-2636.
199. M. Ramulu, P. D. Edwards, D. G. Sanders, A. P. Reynolds and T. Trapp: Mater. Des., 2010, 31, 3056-3061.
200. S. Mironov, Y. Zhang, Y. S. Sato and H. Kokowa: Scr. Mater., 2008, 59, 511-514.
201. L. Fratini, F. Micari, G. Buffa and V. F. Ruisi: CIRP Ann. Manuf. Technol., 2010, 59, 271-274.
202. M. J. Russell, P. L. Threadgill, M. J. Thomas and B. P. Wynne, 'Static shoulder friction stir welding of Ti-6Al-4V; process and evaluation', Proc. 11thWorld Conf. on 'Titanium', Kyoto, Japan, June 2007, Japan Institute of Metals.
203. M. C Juhas, G. B. Viswanathan and H. L. Fraser: 'Microstructural evolution in Ti alloy friction stir welds', Proc 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
204. A. L. Pilchak, M. C Juhas and J. C Williams: Metal. Mater. Trans. A, 2007, 38A, (2), 401.
205. W. A. Baeslack, D. W. Becker and F. H. Froes: J. Met., 1984, 5, 46.
206. G. Çam and M. Koçak: 'Progress in joining of advanced materials' Int. Mater. Rev., 1998, 43, 1-44.
207. G. Çam and M. Koçak: 'Progress in joining of advanced materials-part II: Joining ofmetal matrix composites and joining of other advanced materials', Sci Technol. Weld. Join., 1998, 3, (4), 159-175. (Pubitemid 128684321)
208. K. Ikeuchi: Yosetsu Gakkaishi, 1998, 57, (4), 414.
209. M. B. D. Ellis: Int. Mater. Rev., 1996, 41, (2), 41-58.
210. D. Storjohann, O. M. Barabash, S. S. Babu, S. A. David, P. S. Sklad and E. E. Bloom: Metall. Mater. Trans. A, 2005, 36A, 3237-3247.
211. T. J. Lienert, E. D. Branden and J. C Lippold: Scr. Mater., 1993, 28, 1341-1346.
212. I. W. Hall, T. Kyono and D. Diwanji: J. Mater. Sci, 1987, 22, (5), 1743.
213. J. H. Devletian: Weld. J., 1987, 66, (6), 33-39.
214. J. S. Ahearn, C Cook and S. G. Fishman: Met. Constr., 1982, 14, (4), 192-197.
215. K. Nishimoto and R. Karppi: VTT research notes no. 1463, VTT, Espoo, Finland, 1993.
216. M. S. Hersch: Weld. J., 1968, 47, (9), 404-409.
217. K. Nakata, S. Inoki, Y. Nagano and M. Ushio: Mater. Sci Forum, 2003, 426-434, 2873-2878.
218. G. J. Fernandez and L. E. Murr: Mater. Charact., 2004, 52, (1), 65-75.
219. L. E. Murr, Y. Li, E. A. Trillo and J. C McClure: Mater. Technol., 2000, 15, (1), 37-48.
220. R. A. Prado, L. E. Murr, D. J. Shindo and K. F. Soto: Scr. Mater., 2001, 45, (1), 75-80.
221. S. R. Sharma, R. S. Mishra, M. W. Mahoney and K. V. Jata: in 'Friction stir welding and processing', (ed. K. V. Jata et al.), 151-157; 2001, Warrandale, PA, TMS.
222. T. W. Nelson, H. Zhang, and T. Haynes: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
223. P. Cavaliere, E. Cerri, L. Marzoli and J. D. Santos: Appl. Compos. Mater., 2004, 2, 247-258.
224. P. Cavaliere: Composites Part A, 2005, 36A, 1657-1665.
225. L. M. Marzoli, A. von Strombeck, J. F. dos Santos, C Ganbaro and L. M. Volpone: Compos. Sci. Technol., 2006, 66, (2), 363-371.
226. S. C Baxter and A. P. Reynolds: Proceeding Conf. on 'Lightweight alloys for aerospace applications', (ed. K. Jata et al.), 283-293; 2001, Warrandale, PA, TMS.
227. M. W. Mahoney, W. H. Harrigan and J. A. Wert: Proc. INALCO '98, Vol. 2, 231-236; 1998, Cambridge, TWI.
228. A. H. Feng and Z. Y. Ma: Scr. Mater., 2007, 57, (12), 1113-1116.
229. Z. Y. Ma, A. H. Feng, B. L. Xiao, J. Z. Fan and L. K. Shi: Mater. Sci Forum, 2007, 539-543, 3814-3819.
230. A. H. Feng, B. L. Xiao and Z. Y. Ma: Compos. Sci. Technol., 2008, 68, (9), 2141-2148.
231. A. H. Feng, B. L. Xiao and Z. Y. Ma: Mater. Sci Eng. A, 2008, A497, 515-518.
232. L. Ceschini, I. Boromei, G. Minak, A. Morri and F. Tarterini: Composites Part A, 2007, 38A, (4), 1200-1210.
233. L. Ceschini, I. Boromei, G. Minak, A. Morri and F. Tarterini: Compos. Sci. Technol., 2007, 67, (3-4), 605-615.
234. Y. Bozkurt: 'Mechanical properties snd microstructure of friction stir butt welded AA2124/SiCp/25 composite sheets', PhD Thesis, Marmara University, Istanbul, Turkey, 2008.
235. H. Uzun: Mater. Des., 2007, 28, (5), 1440-1446.
236. R. A. Prado, L. E. Murr, K. F. Soto and J. C McClure: Mater. Sci Eng. A, 2003, A349, (1-2), 156-165.
237. P. Cavaliere, G. L. Rossi, R. Di Sante and M. Moretti: Int. J. Fatigue, 2008, 30, (1), 198-206.
238. H. J. Liu, J. C Feng, H. Fujii and K. Nogi: Int. J. Mach. Tool. Manuf., 2005, 45, (14), 1635-1639.
239. W. B. Lee, C Y. Lee, M. K. Kim, J. I. Yoon, Y. J. Kim, Y. M. Yeon and S. B. Jung: Compos. Sci Technol., 2006, 66, 1513-1520.
240. M. Amirizad, A. H. Kokabi, M. Abbasi-Gharacheh, R. Sarrafi, B. Shalchi and M. Azizieh: Mater. Lett., 2006, 60, (4), 565-568.
241. U. Fuchs, K. Zimmermann, H. W. Sauer, K.-H. Trautmann and G. Biallas: Mat.-wiss. u. Werkstofftech., 2008, 39, (8), 531-544.
242. X.-G. Chen, M. da Silva, P. Gougeon and L. St-Georges: Mater. Sci Eng. A, 2009, A518, 174-184.
243. E. R. I. Mahmoud, M. Takahashi, T. Shibayanagi and K. Ikeuchi: Sci. Technol. Weld. Join., 2009, 14, (5), 413-425.
244. W. L. Stellwag Jr. and T. J. Lienert: 'Friction stir welding of aluminum metal matrix composites', EWI progress report PR0109, EWI, Columbus, OH, USA, May 2001.