Progress in joining of advanced materials. Part 2: Joining of metal matrix composites and joining of other advanced materials

Science and Technology of Welding and Joining

Volumn 3, Issue 4, 1998, Pages 159-175

  Cam G ^a   Kocak M ^a  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 22044449094     PISSN: 13621718     EISSN: None     Source Type: Journal    
DOI: 10.1179/stw.1998.3.4.159     Document Type: Article

References (162)

1. L. E. SHOEMAKER: Proc. Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1986, (ed. S. A. David), ASM International, 371-377.
2. T. J. MOORE and T. K. GLASGOW: Weld. J. Res. (Suppl.), 1985, 64, (8), 219s-226s.
3. H. P. HAMMELMANN, H. P. BUCHKREMER, and D. STOEVER: in 'Diffusion bonding 2', (ed. D. J. Stephenson), 250-260; 1990, London, Elsevier.
4. T. I. KHAN and E. R. WALLACH: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 1095-1099.
5. M. B. D. ELLIS: Members' Report 489/94, TWI, Cambridge, 1994.
6. T. J. LIENERT, E. D. BRANDEN, and J. C. LIPPOLD: Scripta Met., 1993, 28, 1341-1346.
7. K. IKEUCHI: Yosetsu Gakkaishi, 1988, 57, (4), 414.
8. O. T. MIDLING and Ø. GRONG: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 1147-1151.
9. K. NISHIMOTO and R. KARPPI: VTT Research Notes, No. 1463, VTT, Espoo, 1993.
10. I. W. HALL, T. KYONO, and D. DIWANJI: J. Mater. Sci., 1987, 22, (5), 1743.
11. K. SHIOTA: Kaimenkagaku, 1985, 6, (4), 111.
12. G. E. METZGER: WRC Bull., 1975, 207, 1-22.
13. J. R. KENNEDY: Weld. J., 1973, 52, (3), 120-124.
14. R. P. MARTUKANITZ et al.: Proc. Conf. 'Advanced joining technologies for new materials II', Cocoa Beach, FL, USA, March 1994, AWS.
15. M. S. HERSCH: Weld. J., 1968, 47, (9), 404-409.
16. J. H. DEVLETIAN: Weld. J., 1987, 66, (6), 33-39.
17. B. ALTSHULLER, W. CHRISTY, and B. WISKEL: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 305-309.
18. J. S. AHEARN, C. COOK, and S. G. FISHMAN: Met. Constr., 1982, 14, (4), 192-197.
19. D. M. DODDARD, R. T. PEPPER, J. W. UPP, and E. G. KENDALL: Weld. J., 1972, 51, (4), 178-182.
20. T. M. STANTZ, D. K. AIDUN, D. J. MORRISON, T. DIEBOLD, P. MARTIN, and M. BRUSKOTTER: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 781-785.
21. M. B. D. ELLIS, M. F. GITTOS, and P. L. THREADGILL: Proc. Symp. 'Welding, joining, coating, and surface modification of advanced materials', Dalian, China, September 1994, (ed. J. H. Chen), IIW, 245-249.
22. D. M. BOLLAT: US Patent No. US4706550, 1987.
23. M. J. COLA and C. E. ALBRIGHT: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 1139-1146.
24. C. D. LUNDIN, J. C. DANKO, and C. J. SWINDEMAN: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989, (ed. S. A. David and J. M. Vitek), ASM International, 303-307.
25. R. A. HAPPE and A. J. TEAST: 'Metal matrix composites annual report', Report SD 68-971, Space Division, North American Rockwell Corp., 1968.
26. S. KATAYAMA: unpublished work, University of Tennessee, Knoxville, TN, USA, 1988.
27. M. J. COLA, T. J. LIENERT, J. E. GOULD, and J. P. HURLEY: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 297-303.
28. S. UTSUNOMIYA, Y. KAGAWA, and Y. KOGO: Proc. 3rd Japan-US Conf. on Composite Materials, Tokyo, Japan, June 1986, 589-595.
29. C. BOUCHER, D. VARELA, M. DADIAN, and M. GRANJON: Rev. Métall., Cah. Inf. Tech., 1976, 73, (12), 817-831.
30. R. E. PEASE: Weld. J. Res. (Suppl.), 1957, 36, 330s-334s.
31. T. J. KELLY: Weld. J. Res. (Suppl.), 1989, 68, (2), 44s-51s.
32. T. J. KELLY: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989, (ed. S. A. David and J. M. Vitek), ASM International, 625-629.
33. T. F. BERRY and W. P. HUGHES: Weld. J. Res. (Suppl.), 1967, 46, (8), 361s-370s.
34. T. F. BERRY and W. P. HUGHES: Weld. J. Res. (Suppl.), 1969, 48, (11), 505s-513s.
35. M. PRAGER and C. S. SHIRA: Weld. Res. Counc. Bull., 1968, (128).
36. T. J. KELLY: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 151-157.
37. J. J. PEPE and W. F. SAVAGE: Weld. J. Res. (Suppl.), 1967, 46, (9), 411s-422s.
38. D. S. DUVALL and W. A. OWCZARSKI: Weld. J. Res. (Suppl.), 1967, 46, (9), 423s-432s.
39. W. A. OWCZARSKI, D. S. DUVALL, and C. P. SULLIVAN: Weld. J. Res. (Suppl.), 1966, 45, (4), 145s-155s.
40. J. L. ROBINSON and W. H. SCOTT: Philos. Trans. R. Soc. (London) A, 1980, A295, 105-107.
41. E. G. THOMPSON: Weld. J. Res. (Suppl.), 1969, 48, (2), 70s-79s.
42. R. G. THOMPSON, J. J. CASSIMUS, D. E. MAYO, and J. R. DOBBS: Weld. J. Res. (Suppl.), 1985, 64, (4), 91s-96s.
43. R. A. PATTERSON, R. B. NEMEC, and R. D. REISWIG: Weld. J. Res. (Suppl.), 1987, 66, (1), 19s-25s.
44. M. J. CIESLAK, G. A. KNOROVSKY, T. J. HEADLEY, and A. D. ROMIG, Jr: Metall. Trans. A, 1986, 17A, 2107-2116.
45. M. J. CIESLAK, T. J. HEADLEY, T. KOLLIE, and A. D. ROMIG, Jr: Metall. Trans. A, 1988, 19A, 2319-2331.
46. S. T. WLODEK: ASM Trans., 1963, 56, 287-303.
47. M. J. CIESLAK: Weld. J., 1991, 70, (2), 49s-56s.
48. G. A. KNOROVSKY, M. J. CIESLAK, T. J. HEADLEY, A. D. ROMIG, Jr, and W. F. HAMMETTER: Metall. Trans. A, 1989, 20A, 2149-2158.
49. W. A. BAESLACK III, T. J. KELLY, and S. L. WEST: Scr. Metall., 1988, 22, 729-734.
50. G. G. THOMPSON, D. E. MAYO, and B. RADHAKRISHNAN: Metall. Trans. A, 1991, 22A, 557-567.
51. B. RADHAKRISHNAN and R. G. THOMPSON: in 'Metal science of joining', (ed. M. J. Cieslak et al.), 31-40; 1991, Warrendale, PA, TMS.
52. B. RADHAKRISHNAN and R. G. THOMPSON: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989. (ed. S. A. David and J. M. Vitek), ASM International, 637-648.
53. T. J. MORRISON, C. S. SHIRA, and L. A. WEISENBERG: Proc. AWS Welding Research Symp., Vol. 93; 1967, Miami, FL, AWS.
54. W. A. OWCZARSKI: Weld. Res. Counc. Bull., 1969, (6).
55. W. YENISCAVICH and C. W. FOX: Weld. Res. Counc. Bull., 1969, (24).
56. D. A. CANONICO et al.: Weld. Res. Counc. Bull., 1969, (68).
57. R. G. THOMPSON and S. GENCULU: Weld. J. Res. (Suppl.), 1983, 62, (12), 337s-345s.
58. R. G. THOMPSON, J. R. DOBBS, and D. E. MAYO: Weld. J. Res. (Suppl.), 1986, 65, (11), 299s-304s.
59. R. G. THOMPSON, B. RADHAKRISHNAN, and E. D. MAYO: J. Phys., 1988, C5, Suppl. 10, 471-482.
60. P. Y. Y. MAAK and M. J. TINKLER: Proc. Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1986, (ed. S. A. David), ASM International, 635-640.
61. M. C. MAGUIRE and T. J. HEADLEY: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 167-173.
62. W. J. MILLS: Weld. J. Res. (Suppl.), 1984, 63, (8), 237s-245s.
63. W. J. MILLS: Weld. J. Res. (Suppl.), 1987, 66, (4), 113s-119s.
64. S. A. DAVID, J. M. VITEK, S. S. BABU, L. A. BOATNER, and R. W. REED: Sci. Technol. Weld. Joining, 1997, 2, (2), 79-88.
65. J. M. VITEK, S. A. DAVID, and L. A. BOATNER: Sci. Technol. Weld. Joining. 1997, 2, (3), 109-118.
66. J. P. REYNOLDS, H. W. KERR, P. J. FEHRENBACH, L. BOURQUE, and R. D. DAVIDSON: Proc. Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1986, (ed. S. A. David), ASM International, 325-329.
67. W.-B. BUSCH and H.-D. KUNZE: Proc. 3rd Int. Colloq. on Welding and Melting by Electrons and Laser Beams, Lyon, France, September 1983, (ed. M. Contré and M. Kuncevic), Institut de Soudure, Vol. 1, 517-524.
68. S. L. GOBBI, L. ZHANG, I. NORRIS, H. K. RICHTER, J. Y. LOREAU: Proc. Conf. Eurojoin 2, Florence, Italy, May 1994, Italian Institute of Welding, 655-665.
69. L. ZHANG, S. L. GOBBI, G. FONTANA, H. K. RICHTER, and J. NORRIS: Metall. Ital., 1997, 5, 41-47.
70. I. J. POLMEAR: Mater. Trans., JIM, 1996, 37, (1), 12-31.
71. L. S. KRAMER, F. H. HEUBAUM, and J. R. PICKENS: in 'Aluminium-lithium alloys III', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 1415-1424; 1989, Warley, Materials and Components Engineering Publishing.
72. J. R. PICKENS, F. H. HEUBAUM, T. J. LANGAN, and L. S. KRAMER: in 'Aluminium-lithium alloys III', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 1397-1411; 1989, Warley, Materials and Components Engineering Publishing.
73. W. T. TACK and L. W. LOECHEL: in 'Aluminium-lithium alloys III', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 1457-1467; 1989, Warley, Materials and Components Engineering Publishing.
74. 'ASM handbook', Vol. 6, 'Welding, brazing, and soldering', (ed. D. L. Olson et al.); 1993, Materials Park, OH, ASM International.
75. P. B. DICKERSOM and B. IRVING: Weld. J., 1992, 71, (4), 45-50.
76. S. KOU: 'Welding metallurgy', 239; 1987, New York, NY, Wiley.
77. K. TSUJIMOTO, A. SAKAGUCHI, T. KINOSHITA, K. TANAKA, and S. SASABE: Document IX-1273, IIW, Vienna, 1983, 1-13.
78. C. E. CROSS, D. L. OLSON, G. R. EDWARDS, and J. F. CAPES: in 'Aluminium-lithium alloys II', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), 675; 1984, Warrendale, PA, Metallurgical Society of AIME.
79. 'Welding aluminium', 1972; Miami, FL, AWS.
80. C. E. CROSS, W. T. TACK, L. W. LOECHEL, and L. S. KRAMER: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, ASM International, 275-282.
81. W. I. PUMPHREY and D. C. MOORE: J. Inst. Met., 1948, 74, 425-438.
82. J. H. DUDAS and F. R. COLLINS: Weld. J. Res. (Suppl.), 1966, 45, (6), 241s-249s.
83. C. L. CROSS: PhD thesis, Colorado School of Mines, Golden, CO, USA, 1986, 144.
84. A. R. E. SINGER and P. H. JENNINGS: J. Inst. Met., 1947, 73, 197-212.
85. W. I. PUMPHREY and J. V. LYONS: J. Inst. Met., 1948, 74, 439-455.
86. J. D. DOWD: Weld. J. Res. (Suppl.), 1952, 31, (10), 448s.
87. P. H. JENNINGS, A. R. E. SINGER, and W. I. PUMPHREY: J. Inst. Met., 1948, 74, 227-248.
88. J. K. DAWSON: Met. Prog., 1959, 76, (1), 116-118.
89. R. P. MEISTER and D. C. MARTIN: Report, Defense Metals Information Center, Battelle Memorial Institute, 1967, 51.
90. R. A. CHIHOSKI: Weld. J. Res. (Suppl.), 1972, 51, (1), 9s.
91. M. J. DVORNAK, R. H. FROST, and D. L. OLSON: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 289-295.
92. M. J. CIESLAK and P. W. FUERSCHBACH: Metall. Trans. B, 1988, 19B, 319-329.
93. J. E. WITTIG and J. O. MILEWSKI: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 199-203.
94. J. O. MILEWSKI, G. K. LEWIS, and J. E. WITTIG: Weld. J. Res. (Suppl.), 1993, 72, (7), 341s-346s.
95. M. KUTSUNA, J. SUZUKI, S. KIMURA, S. SUGIYAMA, M. YUKHI, and H. YANUOKA: Weld. World, 1993, 31, (2), 126-135.
96. K. NAMBA and H. SANO: Kei Kinzoku Yosetsu (J. Light Met. Weld. Constr.), 1986, 24, (6), 243-250.
97. M. F. GITTOS: Report 7944.01/87/556.2, TWI, Cambridge, 1987.
98. M. R. EDWARDS and V. E. STONEHAM: J. Phys. 1987, C3, Suppl. 48a, 293-299.
99. J. C. LIPPOLD: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1365-1375.
100. C. E. CROSS and W. T. TACK: Proc. 73rd AWS Annual Convention, Chicago, IL, USA, March 1992, AWS.
101. M. H. SKILLINGBERG: Proc. Conf. Aluminium Technology '86, London, UK, March 1986, (ed. C. Baker et al.), The Institute of Metals, 509-515.
102. J. R. KERR and R. E. MERINO: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1491-1500.
103. E. F. SCHOLZ, L. W. LOECHEL, and M. O. ROBERTS: Proc. 28th AIAA Propulsion Conf., 1992, American Institute of Aeronautics and Astronautics, 1-11.
104. D. S. GNANAMUTHU and R. J. MOORES: Proc. Int. Power Beam Conf., San Diego, CA, USA, May 1988, (ed. E. A. Metzbower and D. Hauser), ASM International, 181-183.
105. T. ZACHARIA, S. A. DAVID, J. M. VITEK, and R. P. MARTUKANITZ: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1387-1396.
106. R. P. MARTUKANITZ, C. A. NATALIE, and J. O. KNOEFEL: J. Met., 1987, 39, 38-42.
107. R. P. MARTUKANITZ, R. H. STEVENS, and L. R. JOHNSON: Microstruct. Sci., 1987, 14, 53-64.
108. A. J. SUNWOO and J. W. MORRIS, Jr: Weld. J. Res. (Suppl.), 1989, 68, (7), 262s-268s.
109. A. J. SUNWOO and J. W. MORRIS, Jr: Metall. Trans., 1991, 22A, 903-913.
110. T. A. MARSICO and R. KOSSOWSKY: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1447-1456.
111. P. A. MOLIAN and T. S. SRIVATSAN: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1435-1445.
112. P. A. MOLIAN and T. S. SRIVATSAN: J. Mater. Sci., 1990, 25, 3347-3358.
113. D. WEBSTER and C. G. BENNETT: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 283-288.
114. D. J. FIELD: 'Treatise on materials science and technology', Vol. 31, 523-537; 1989, Warley, Materials and Components Engineering Publishing.
115. T. A. MARSICO and R. KOSSOWSKY: Report, Applied Research Laboratory, Penn State University, University Park, PA, 1988.
116. S. KATAYAMA, C. D. LUNDIN, J. C. DANKO, and T. D. MCKAY: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989, (ed. S. A. David and J. M. Vitek), ASM International, 687-691.
117. I. R. WHITAKER, D. G. MCCARTNEY, N. CALDER, and W. M. STEEN: J. Mater. Sci., 1993, 28, 5469-5478.
118. D. E. J. TALBOT: Proc. Conf. Materials '87, London, UK, May 1987, The Institute of Metals, 29-31.
119. J. R. PICKENS: J. Mater. Sci., 1985, 20, 4247-4258.
120. V. N. MIRONENKO and A. I. LITVINTSEV: Weld. Prod., 1979, 26, (1), 30.
121. C. A. BOKSHTEIN: Automat. Weld., 1978, 6, 34.
122. A. Ya. ISHCHENKO: Automat. Weld., 1979, 32, (2), 18.
123. J. R. PICKENS, T. J. LANGAN, and E. BARTA: Proc. Conf. Aluminium Technology '86, London, UK, March 1986, (ed. C. Baker et al.), The Institute of Metals, 137-147.
124. L. F. MARINEZ, J. C. MCCLURE, and A. C. NUNES: Proc. Eng. Des. (Trans. ASME), 1991, 51, 235-243.
125. S. D. DUMOLT: 'Metallurgical transactions in the heat treated zone of aluminum alloys by transmission electron microscopy', PhD thesis, Carnegie-Mellon University, Pittsburgh, PA, USA, 1983.
126. T. ENJO and T. KURODA: Trans. JWRI, 1982, 11, (1), 61-66.
127. R. P. MARTUKANITZ: in 'Advances in welding science and technology', (ed. S. A. David), 193-201; 1986, Materials Park, OH, ASM International.
128. S. KOU: Weld. Res. Counc. Bull., 1986, (320).
129. W. L. BURCH: Weld. J. Res. (Suppl.), 1958, 37, (8), 371s-367s.
130. R. J. BRUNGRABER and F. G. NELSON: Weld. J. Res. (Suppl.), 1973, 52, (3), 97s-103s.
131. G. E. METZGER: Weld. J. Res. (Suppl.), 1967, 46, (10), 457s-469s.
132. F. R. COLLINS, F. G. NELSON, and I. B. ROBINSON: Met. Prog., Nov. 1961, 82-87.
133. K. KAMADA, H. KAYANO, Y. BABA, T. UNO, H. YOSHIDA, and Y. SHOJI: J. Nucl. Mater., 1985, 133-134, 897-901.
134. T. SAIDA and K. MATSUMOTO: Japan Patent No. S59-255718, 1986.
135. V. N. MIRONENKO, V. S. EVSTIFEEV, and S. A. KURSHUNKOVA: Weld. Prod., 1977, 24, (12), 44.
136. I. N. FRIDLYANDER: Met. Sci. Heat Treat. (USSR), 1975, (3), 240.
137. W. D. GAW: Proc. Conf. Quest '88, Los Angeles, CA, USA, March 1988, ASM International.
138. E. WILNER: unpublished work, Lockheed Missiles and Space Co., Sunnyvale, CA, USA, 1988.
139. J. R. PICKENS: Proc. 1st United States-Japan Symp. on Advances in Welding Metallurgy, San Francisco, CA, USA, Yokohama, Japan, June 1990, AWS, 103-119.
140. J. R. PICKENS, F. H. HEUBAUM, L. S. KRAMER, and K. S. KUMAR: 'Ultra high strength weldable aluminium-lithium alloys', unpublished work, patent pending, Martin Marietta Laboratories, MD, USA, 1989.
141. S. R. SHAH, J. E. WITTIG, and G. T. HAHN: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 281-285.
142. J. W. HACKETT and W. M. MacFARLANE: Proc. Naval Air Development Center Conf. on Aluminium Alloys, Valley Forge, PA, USA, October 1988, Naval Air Development Center.
143. C. C. GRIFFEE, G. A. JENSEN, and T. L. REINHART: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 1425-1434.
144. P. Le POAC, A. M. NOMINE, and D. MIANNAY: J. Phys., 1987, 48, 301-306.
145. C. E. CROSS, L. W. LOECHEL, and G. F. BRAUN: Proc. 6th Int. Aluminium-Lithium Conf., 1165-1170; 1991, Oberursel, Deutsche Gesellschaft für Materialkunde.
146. M. O. ROBERTS and L. W. LOECHEL: Proc. AWS Convention, Houston, TX, USA, 1993, AWS.
147. J. R. PICKENS: J. Mater. Sci., 1990, 25, 3035-3047.
148. J. PILLING and N. RIDLEY: Mater. Sci. Technol., 1987, 3, (5), 353-359.
149. J. HARVEY, P. G. PARTRIDGE, and A. M. LURSHAY: Mater. Sci. Eng., 1986, 79, 191-199.
150. D. V. DUNFORD, C. G. GILMORE, and P. G. PARTRIDGE: in 'Diffusion bonding', (ed. R. Pearce), 88; 1987, Cranfield, Cranfield Institute of Technology.
151. D. V. DUNFORD and P. G. PARTRIDGE: in 'Superplasticity in aerospace aluminium', (ed. R. Pearce and L. Kelly), 257; 1985, Cranfield, Cranfield Institute of Technology.
152. P. G. PARTRIDGE and D. V. DUNFORD: J. Mater. Sci., 1987, 22, (5), 1597-1608.
153. N. RIDLEY, J. PILLING, A. TEKIN, and Z. X. GUO: in 'Diffusion bonding', (ed. R. Pearce), 129-142; 1987, Cranfield, Cranfield Institute of Technology.
154. L. C. CLINE: Weld. J. Res. (Suppl.), 1966, 45, (11), 481s-489s.
155. J. PILLING and N. RIDLEY: 'Superplasticity in crystalline solids', 188-193; 1989, London, The Institute of Metals.
156. D. G. CRAWFORD: Members' Report 216/1983, TWI, Cambridge, 1983, 16.
157. E. R. MADDRELL, R. A. RICKS, and E. R. WALLACH: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 451-460.
158. E. R. MADDRELL and E. R. WALLACH: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989, (ed. S. A. David and J. M. Vitek), ASM International, 541-545.
159. M. R. EDWARDS, E. KLINKLIN, and V. E. STONEHAM: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 431-440.
160. A. URENA and S. B. DUNKERTON: Members' Report 403/1989, TWI, Cambridge, 1989.
161. A. A. JUNAI, M. SCHANSSEMA, and J. N. MAAS: Proc. 44th IIW Int. Conf., The Hauge, The Netherlands, July 1991, UW, 317-325.
162. R. A. RICKS, P. J. WINKLER, and H. STOKLOSSA: Proc. 5th Int. Aluminium-Lithium Conf., Williamsburg, VA, USA, March 1989, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), ASM International, 441-449.