Cohesive zone modeling of initiation and propagation of multiple cracks in hard thin surface coatings

Journal of ASTM International

Volumn 8, Issue 1, 2011, Pages

  Laukkanen, Anssi ^a   Homberg, Kenneth ^a   Ronkainen, Helena ^a   Wallin, Kim ^b  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b ACADEMY OF FINLAND   (Finland)

Author keywords

Coatings; Cohesive zone modeling; Finite element method; Fracture toughness

Indexed keywords

COATED SYSTEMS; COATING CRACKS; COATING STRUCTURES; COHESIVE ZONES; COHESIVE-ZONE MODELING; COMPLICATED SYSTEMS; FAILURE BEHAVIORS; FINITE ELEMENT; FINITE-ELEMENT APPROACH; FRACTURE MECHANICAL ANALYSIS; FUNCTIONALLY GRADED COATINGS; MATERIAL PARAMETER; METALLIC SUBSTRATE; MULTIPLE CRACK; NANOSTRUCTURAL; NOVEL COATINGS; NUMERICAL MODELING; SCRATCH TEST; SUBSTRATE INTERFACE; SURFACE COATINGS; THIN HARD COATINGS; THIN SURFACES; TRIBOLOGICAL CONTACTS; TRIBOLOGICAL PERFORMANCE;

CRACKS; FINITE ELEMENT METHOD; FRACTURE TOUGHNESS; HARD COATINGS; SURFACES; TRIBOLOGY;

FRACTURE;

EID: 78751659227     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI102525     Document Type: Article

References (32)

1. Diao, D., Kato, K., and Hayashi, K., "The Maximum Tensile Stress on a Hard Coating Under Sliding Friction," Tribol. Int., Vol. 27, 1994, pp. 267-272.
2. Li, K., Diao, D., and Bhushan, B., "Fracture Mechanics of Thin Amorphous Carbon Films in Nanoin-dentation," Acta Mater., Vol. 45, 1997, pp. 4453-4461.
3. Li, K. and Bhushan, B., "Measurement of Fracture Toughness of Ultra-Thin Amorphous Carbon Films," Thin Solid Films, Vol. 315, 1998, pp. 214-221.
4. Nastani, M., Kodali, P., Walter, K., Embury, R., and Raj, Y., "Fracture Toughness of Diamondlike Carbon Coatings," J. Mater. Res., Vol. 14, 1999, pp. 2173-2180.
5. Ollivier, B., Dowey, S., Young, S., and Matthews, A., "Adhesion Assessment of DLC Films on PET Using a Simple Tensile Tester: Comparison of Different Theories," J. Adhes. Sci. Technol., Vol. 9, 1995, pp. 769-784.
6. Wiklund, U., Bromark, M., Larsson, M., Hedenquist, P., and Hogmark, S., "Cracking Resistance of Thin Hard Coatings Estimated by Four-Point Bending," Surf. Coat. Technol., Vol. 91, 1997, pp. 57-63.
7. Sriram, K., Narasimhan, R., and Biswas, S. K., "A Numerical Aanalysis of Indentation Into Thin Hard Films on Soft Substrates," Eng. Fract. Mech., Vol. 70, 2003, pp. 1323-1338.
8. Chai, H., "Fracture Mechanics Analysis of Thin Coatings Under Plane-Strain Indentation," Int. J. Solids Struct., Vol. 40, 2003, pp. 591-610. (Pubitemid 36166636)
9. Souza, R., Mustoe, G., and Moore, J., "Finite Element Modeling of the Stresses, Fracture and Delamination During the Indentation of Hard Elastic Films on Elastic-Plastic Soft Substrates," Thin Solid Films, Vol. 392, 2001, pp. 65-74.
10. Malzbender, J. and de With, G., "Modeling of the Fracture of a Coating Under Sliding Indentation," Wear, Vol. 239, 2000, pp. 21-26.
11. Barenblatt, G., "The Mathematical Theory of Equilibrium Cracks in Brittle Fracture," Adv. Appl. Mech., Vol. 7, 1962, pp. 55-129.
12. Dugdale, D., "Yielding of Steel Sheets Containing Slits," J. Mech. Phys. Solids, Vol. 8, 1960, pp. 100-104.
13. Griffith, A., "The Phenomena of Rupture and Flow in Solids," Philos. Trans. R. Soc. London, Ser. A, Vol. 221, 1921, pp. 163-198.
14. de Borst, R., "Numerical Aspects of Cohesive-Zone Models," Eng. Fract. Mech., Vol. 70, 2003, pp. 1743-1757.
15. de Borst, R., Wells, G. N., and Sluys, L. J., "Some Observations on Embedded Discontinuity Mod-els," Eng. Comput., Vol. 18, 2001, pp. 241-254.
16. Chen, C. R. and Kolednik, O., "Comparison of Cohesive Zone Parameters and Crack Tip Stress States Between Two Different Specimen Types," Int. J. Fract., Vol. 132, 2005, pp. 135-152.
17. Tvergaard, T., "Crack Growth Predictions by Cohesive Zone Model for Ductile Fracture," J. Mech. Phys. Solids, Vol. 49, 2001, pp. 2191-2207.
18. Tijssens, M., Sluys, B., and Giessen, E., "Numerical Simulation of Quasi-Brittle Fracture Using Damaging Cohesive Surfaces," Eur. J. Mech. A/Solids, Vol. 19, 2000, pp. 761-779.
19. van den Bosch, M. J., Schreurs, P. J. G., and Geers, M. G. D., "An Improved Description of the Exponential Xu and Needleman Cohesive Zone Law for Mixed-Mode Decohesion," Eng. Fract. Mech., Vol. 73, 2006, pp. 1220-1234.
20. Freed, Y. and Banks-Sills, L., "A New Cohesive Zone Model for Mixed Mode Interface Fracture in Bimaterials," Eng. Fract. Mech., Vol. 75, 2008, pp. 4583-4593.
21. Hu, J., Chou, Y. K., and Thompson, R. G., "Cohesive Zone Effects on Coating Failure Evaluations of Diamond-Coated Tools," Surf. Coat. Technol., Vol. 203, 2008, pp. 730-735.
22. Yan, Y. and Shang, F., "Cohesive Zone Modeling of Interfacial Delamination in PZT Thin Films," Int. J. Solids Struct., Vol. 46, 2009, pp. 2739-2749.
23. Yuan, H. and Chen, J., "Computational Analysis of Thin Coating Layer Failure Using a Cohesive Model and Gradient Plasticity," Eng. Fract. Mech., Vol. 70, 2003, pp. 1929-1942.
24. Jansson, N. E., Leterrier, Y., Medico, L., and Månson, J.-A. E., "Calculation of Adhesive and Cohe-sive Fracture Toughness of a Thin Brittle Coating on a Polymer Substrate," Thin Solid Films, Vol. 515, 2006, pp. 2097-2105.
25. Bialas, M., Majerus, P., Herzog, R., and Mróz, Z., "Numerical Simulation of Segmentation Cracking in Thermal Barrier Coatings by Means of Cohesive Zone Elements," Mater. Sci. Eng., A, Vol. 412, 2005, pp. 241-251.
26. Chandra, N., Li, H., Shet, C., and Ghonem, H., "Some Issues in the Application of Cohesive Zone Models for Metal-Ceramic Interfaces," Int. J. Solids Struct., Vol. 39, 2002, pp. 2827-2855.
27. Jin, Z.-H., Paulino, G. H., and Dodds, R. H., Jr., "Cohesive Fracture Modeling of Elastic-Plastic Crack Growth in Functionally Graded Materials," Eng. Fract. Mech., Vol. 70, 2003, pp. 1885-1912.
28. Holmberg, K. and Matthews, A., Coatings Tribology, Elsevier Science, New York, 2009.
29. Laukkanen, A., Holmberg, K., Koskinen, J., Ronkainen, H., Wallin, K., and Varjus, S., "Tribological Contact Analysis of a Ball Sliding on a Flat Coated Surface, Part III: Fracture Toughness Calculation and Influence of Residual Stresses," Surf. Coat. Technol., Vol. 200, 2006, pp. 3824-844.
30. Bruckner, H. F., "A Novel Principle for the Computation of Stress Intensity Factors," Z. Angew. Math. Mech., Vol. 50, 1970, pp. 529-546.
31. Holmberg, K., Laukkanen, A., Ronkainen, H., and Wallin, K., "Surface Stresses in Coated Steel Surfaces-Influence of a Bond Layer on Surface Fracture," Tribol. Int., Vol. 42, 2009, pp. 137-148
32. Abaqus 6.9-2 FEA., Simulia, Providence, RI.