Surface stresses in coated steel surfaces-influence of a bond layer on surface fracture

Tribology International

Volumn 42, Issue 1, 2009, Pages 137-148

  Holmberg, Kenneth ^a   Laukkanen, Anssi ^a   Ronkainen, Helena ^a   Wallin, Kim ^a,b  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b ACADEMY OF FINLAND   (Finland)

Author keywords

Coating adhesion; Finite element method model; Hard coating

Indexed keywords

ADHESION; COATINGS; FINITE ELEMENT METHOD; STEEL; STEEL METALLOGRAPHY; STRESS CONCENTRATION; TENSILE STRESS; THICKNESS MEASUREMENT; THREE DIMENSIONAL; TIN; TITANIUM COMPOUNDS; TITANIUM NITRIDE;

ADHESION IMPROVEMENTS; BOND LAYERS; COATED STEELS; COATED SURFACES; COATING ADHESION; COATING DESIGNS; CONTACT ZONES; FINITE-ELEMENT METHOD MODEL; FINITE-ELEMENT METHODS; FRICTION AND WEAR PROPERTIES; HIGH STRESS CONCENTRATIONS; LOAD RANGES; LOW MODULUS; ORDERS OF MAGNITUDES; PHYSICAL VAPOUR DEPOSITIONS; PRINCIPAL STRESSES; SCRATCH TESTS; STEEL SUBSTRATES; SURFACE FRACTURES; SURFACE STRESSES; THIN HARD COATINGS;

HARD COATINGS;

EID: 56249115178     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2008.04.013     Document Type: Article

References (36)

1. Holmberg K., and Matthews A. Coatings tribology properties, techniques and applications in surface engineering, Elsevier tribology series, vol. 28 (1994), Elsevier Science B.V., The Netherlands p. 442
2. Holmberg K., and Matthews A. Triboogy of engineering surfaces. In: Stanchowiak G. (Ed). Wear-materials, mechanisms and practice; tribology in practice series (2005), Wiley, Chichister, UK 123-166
3. Holmberg K., Ronkainen H., Laukkanen A., and Wallin K. Friction and wear of coated surfaces-scales, modelling and simulation of tribomechanisms. Surf Coatings Technol 202 (2007) 1034-1049
4. Diao D., Kato K., and Hayashi K. The maximum tensile stress on a hard coating under sliding friction. Tribol Int 27 4 (1994) 267-272
5. Parr G. Measurement of mechanical properties by ultra-low load indentation. Mater Sci Eng A 253 (1998) 151-159
6. Holmberg K. The basic material parameters that control friction and wear of coated surfaces under sliding. Tribol Finnish J Tribol 19 3 (2003) 3-18
7. Burnett P., and Rickerby D. The mechanical properties of wear-resistant coatings I: modelling of hardness behaviour. Thin Solid Films 148 (1987) 41-50
8. In: Rickerby D., and Matthews D. (Eds). Advanced surface coatings: a handbook of surface engineering (1991), Blackie, Glasgow, UK 364
9. Ye N., and Komvopoulus K. Indentation analysis of elastic-plastic homogeneous and layered media: criteria for determining the real material hardness. J Tribol Trans ASME 125 (2003) 685-691
10. Oliver W., and Pharr G. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7 6 (1992) 1564-1583
11. Komvopoulos K. Elastic-plastic finite element analysis of indented layered media. J Tribol Trans ASME 111 (1989) 430-439
12. Djabella H., and Arnell R. Finite element analysis of the contact stresses in an elastic coating on an elastic substrate. Thin Solid Films 213 (1992) 205-219
13. Djabella H., and Arnell R. Finite element analysis of contact stresses in elastic double-layer systems under normal load. Thin Solid Films 223 (1993) 98-108
14. Mao K., Sun Y., and Bell T. A numerical model for the dry sliding contact of layered elastic bodies with rough surfaces. Tribol Trans 39 2 (1995) 416-424
15. Zheng L., and Ramalingam S. Stresses in a coated solid due to shear and normal boundary tractions. J Vac Sci Technol A 13 5 (1995) 2390-2398
16. Kral E., and Komvopoulos K. Three-dimensional finite element analysis of surface deformation and stresses in an elastic-plastic layered medium subject to indentation and sliding contact loading. J Appl Mech Trans ASME 63 (1996) 365-375
17. Stephens L., Liu Y., and Meletis E. Finite element analysis of the initial yielding behaviour of a hard coating/substrate system with functionally graded interface under indentation and friction. J Tribol Trans ASME 122 (2000) 381-387
18. Souza R., Mustoe G., and Moore J. Finite element modelling of the stresses, fracture and delamination during the indentation of hard elastic films on elastic-plastic soft substrates. Thin Solid Films 392 (2001) 65-74
19. Gong Z., and Komvopoulos K. Effect of surface patterning on contact deformation of elastic-plastic layered media. J Tribol Trans ASME 125 (2003) 16-24
20. Gong Z., and Komvopoulos K. Mechanical and thermomechanical elastic-plastic contact analysis of layered media with patterned surfaces. J Tribol Trans ASME 126 (2004) 9-17
21. Ye N., and Komvopoulus K. Effect of residual stress in surface layer on contact deformation of elastic-plastic layered media. J Tribol Trans ASME 125 (2003) 692-699
22. Ye N., and Komvopoulus K. Three-dimensional finite element analysis of elastic-plastic layered media under thermomechanical surface loading. J Tribol Trans ASME 125 (2003) 52-59
23. Gong Z.G., and Komvopoulos K. Surface cracking in elastic-plastic multi-layered media due to repeated sliding contact. J Tribol Trans ASME 126 (2004) 655-663
24. Li J., and Beres W. Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate. Wear 260 (2006) 1232-1242
25. 2 coatings using microscratch techniques. Tribol Int 39 (2006) 138-145
26. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., and Varjus S. A model for stresses, crack generation and fracture toughness calculation in scratched TiN coated steel surfaces. Wear 254 (2003) 278-291
27. Holmberg K., Laukkanen A., Ronkainen H., and Wallin K. Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations. Tribol Int 38 (2005) 1035-1049
28. Valli J. A review of adhesion test methods for thin hard coatings. J Vac Sci Technol A 4 6 (1986) 3007-3014
29. European Standard, Advanced technical ceramics-Methods of tests for ceramic coatings-part 3: determination of adhesion and other mechanical failure modes by scratch test, prEN1071-3 1999. p. 42.
30. Laukkanen A., Holmberg K., Koskinen J., Ronkainen H., Wallin K., and Varjus S. Tribological contact analysis of a ball sliding on a flat coated surface, part III: fracture toughness calculation and influence of residual stresses. Surf Coatings Technol 200 (2006) 3824-3844
31. Bull S. Failure modes in scratch adhesion testing. Surf Coatings Technol 50 (1991) 25-32
32. von Stebut J., Rezakhanlou R., Anoun K., Michel H., and Gantois G. Major damage mechanisms during scratch and wear testing of hard coatings on hard substrates. Thin Solid Films 181 (1989) 555-564
33. Larsson M, Olsson M, Hedenquist P, Hogmark S. On the mechanism of coating failure as demonstrated by scratch and indentation testing of TiN and HSS. Uppsala Dr thesis by Larsson, M., No. 191/1996.
34. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Tribological contact analysis of a rigid ball sliding on a hard coated surface, part I: modelling stresses and strains. Surf Coatings Technol 200 (2006) 3793-3809
35. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Tribological contact analysis of a rigid ball sliding on a hard coated surface, part II: material deformations, influence of coating thickness and young's modulus. Surf Coatings Technol 200 (2006) 3810-3823
36. 2 coated contacts by 3D FEM modeling. In: Vizintin J, Podgornik B, Holmberg K, Ciulli E, Franek F (editors). Proc. of ECOTRIB 2007 joint european conference on tribology, vol. I, 12-15 June 2007, Ljubljana, Slovenia, Slovenian Society for Tribology. p. 181-94.