Anisotropy and formability

Advances in Material Forming: Esaform 10 years on

Volumn , Issue , 2007, Pages 143-173

  Banabic, Dorel ^a   Barlat, Frédéric ^b   Cazacu, Oana ^c   Kuwabara, Toshihiko ^d  

^a TECHNICAL UNIVERSITY OF CLUJ NAPOCA   (Romania)

^b ALCOA TECHNICAL CENTER   (United States)

^c UNIVERSITY OF FLORIDA   (United States)

^d TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY   (Japan)

Author keywords

Anisotropy; Biaxial tensile tests; Forming limit diagrams; Yield criteria

Indexed keywords

EID: 78651542966     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-2-287-72143-4_9     Document Type: Chapter

References (222)

1. Abedrabbo, N., Pourboghrat, F., Carsley, J.: Forming of aluminum alloys at elevated temperatures. Int. J. Plasticity 22 (2006) 314-373
2. Aretz, H.: Numerical restrictions of the modified maximum force criterion for prediction of forming limits in sheet metal forming. Modelling Simul. Mater. Sci. Eng. 12 (2004) 677-692
3. Aretz, H.: Impact of the equibiaxial plastic strain ratio on the FLD prediction. In: Juster, N., Rosochowski, A. (eds.): Proc. 9th ESAFORM Conference on Material Forming. Glasgow, April 2006. AKAPIT, Krakow (2006) 311-314
4. Arrieux, R., Bedrin, C., Boivin, M.: Determination of an intrinsec Forming Limit Stress Diagram for isotropic sheets. In: Proc. of the 12th IDDRG Congress. S-ta Margerita Ligure (1982) 61-71
5. Arrieux, R., Bedrin, C., Boivin, M.: Determination of the Strain Path Influence of the Forming Limit Diagrams, from the Limit Stress Curve. Annals of the CIRP. 34 (1985) 205-208
6. Arrieux, R.: Determination of the Forming Limit Stress Curve for Anisotropic Sheets. Annals of the CIRP. 36 (1987) 195-198
7. Asaro, R. J., Needleman, A.: Texture development and strain hardening in ratedependent polycrystals. Acta Metall. 33 (1985) 923-953
8. Banabic, D.: Limit strains in the sheet metals by using the 1993 Hill's yield criterion. J. Materials Process. Techn. 92-93 (1999) 429-432
9. Banabic, D., Comsa, D. S., Balan, T., A new yield criterion for orthotropic sheet metals under plane-stress conditions. In: Banabic, D. (ed.): Proc. of the 7th Conf. "TPR2000". Cluj Napoca, (2000) 217-224
10. Banabic, D.: Anisotropy of Sheet Metals. In: Banabic, D. (ed.): Formability of Metallic Materials, Springer-Verlag, Berlin Heidelberg New York (2000) 119-172
11. Banabic, D.: Forming Limits of Sheet Metals. In: Banabic, D. (ed.): Formability of Metallic Materials, Springer-Verlag, Berlin Heidelberg New York (2000) 173-215
12. Banabic, D.: Theoretical Models of the FLD's. In: Banabic, D. (ed.): Formability of Metallic Materials, Springer-Verlag, Berlin Heidelberg New York (2000) 317-327
13. Banabic, D., Dannenmann, E.: The influence of the yield locus shape on the limits strains, J. Materials Process. Techn. 109 (2001) 9-12
14. Banabic, D., Kuwabara, T., Balan, T., Comsa, D. S., Julean, D.: Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions. Int. J. Mech. Sci. 45 (2003) 797-811
15. Banabic, D. et al.: FLD theoretical model using a new anisotropic yield criterion, J. Materials Process. Techn. 157-158 (2004) 23-27
16. Banabic, D.: Anisotropy and formability of AA5182-0 aluminium alloy sheets. Annales of CIRP. 53 (2004) 219-222
17. Banabic, D. et al.: Prediction of FLC from two anisotropic constitutive models. In: Stören, S. (ed.): Proc. 7th ESAFORM Conference on Material Forming. Trondheim, (2004) 455-459
18. Banabic, D., Aretz, H., Comsa, D. S., Paraianu, L.: An improved analytical description of orthotropy in metallic sheets. Int. J. Plasticity 21 (2005) 493-512
19. Banabic, D., Aretz, H., Paraianu, L., Jurco, P.: Application of various FLD modelling approaches. J. Modelling Simul. Materials Science Eng. 13 (2005) 759-769
20. Banabic, D., Cazacu, O., Paraianu, L., Jurco, P.: Recent Developments in the Formability of Aluminum Alloys. In: Smith, L. M., Pourboghrat, F., Yoon, J.-W., Stoughton, T. B. (eds): Proc. of the NUMISHEET 2005 Conference. AIP (2005) 466-472
21. Banabic, D.: Numerical prediction of FLC using the M-K-Model combined with advanced material models. In: Hora, P. (ed): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH Zürich, Zürich (2006) 37-42
22. Banabic, D., Vos, M.: Increasing the Robustness in the Simulation of Sheet Metal Forming Processes using a new Concept - Forming Limit Band. Annales of CIRP. 56 (2007) (in press)
23. Barata da Rocha, A., Jalinier, J. M.: Plastic instability of sheet metals under simple and complex strain path. Trans. Iron Steel Inst. Japan 24 (1984) 133-140
24. Barata da Rocha, A., Barlat, F., Jalinier, J. M.: Prediction of the forming limit diagrams of anisotropic sheets in linear and non-linear loading. Mat. Sci. Eng. 68 (1985) 151-164
25. Barlat, F., Richmond, O.: Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured FCC sheets. Mat. Sci. Eng. 95 (1985) 15-29
26. Barlat, F.: Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals. Mat. Sci. Eng. 91 (1987) 55-72
27. Barlat, F., Lian, J.: Plastic Behavior and Stretchability of Sheet Metals. Part I: Yield Function for Orthotropic Sheets under Plane Stress Conditions. Int. J. Plasticity 5 (1989) 51-66
28. Barlat, F., Lege, D. J., Brem, J. C.: A six-component yield function for anisotropic materials. Int. J. Plasticity 7 (1991) 693-712
29. Barlat, F., Chung, K.: Anisotropic Potentials for Plastically Deforming. Metals, Model. Simul. Mater. Sci. Eng. 1 (1993) 403-416
30. Barlat, F., Becker, R. C., Hayashida, Y., Maeda, Y., Yanagawa, M., Chung, K., Brem, J. C., Lege, D. J., Matsui, K., Murtha, S. J., Hattori, S.: Yielding description of solution strengthened aluminum alloys. Int. J. Plasticity 13 (1997) 185-401
31. Barlat, F., Maeda, Y., Chung, K., Yanagawa, M., Brem, J. C., Hayashida, Y., Lege, D. J., Matsui, K., Murtha, S. J., Hattori, S., Becker, R. C., Makosey, S.: Yield function development for aluminum alloy sheets. J. Mech. Phys. Solids 45 (1997) 1727-1763
32. Barlat, F., Brem, J. C., Yoon, J. W., Chung, K., Dick, R. E., Lege, D. J., Pourboghrat, F., Choi, S.-H., Chu, E.: Plane stress yield function for aluminum alloy sheet-Part I: Theory. Int. J. Plasticity 19 (2003) 1297-1319
33. Barlat, F., Cazacu, O. Zyczowski, M., Banabic, D., Yoon, J. W.: Yield surface plasticity and anisotropy. In: Raabe, D., Roters, F., Barlat, F., Chen, L.-Q. (eds): Continuum Scale Simulation of Engineering Materials-Fundamentals- Microstructures - Process Applications. WileyVCH Verlag Manheim (2004) 145-177
34. Barlat, F.: Constitutive modeling for metals. In: Banabic, D., (ed.): Proc. 8 ESAFORM Conference on Material Forming. Cluj-Napoca April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 3-10
35. Barlat, F., Chung, K.: Anisotropic strain rate potential for aluminum alloy plasticity. In: Banabic, D. (ed.): Proc. 8 ESAFORM Conference on Material Forming. Cluj-Napoca April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 415-418
36. Barlat, F., Aretz, H., Yoon, J. W., Karabin, M. E., Brem, J. C., Dick, R. E.: Linear transformation-based anisotropic yield functions. Int. J. Plasticity 21 (2005) 1009-1039
37. Barlat, F.: Constitutive modeling for metals. In: Banabic D. (ed.): Advanced Methods in Material Forming. Springer-Verlag, Berlin Heidelberg New York (2007) 5-25
38. Barlat, F., Yoon, J. W., Cazacu, O.: On linear transformations of stress tensors for the description of plastic anisotropy. Int J. Plasticity 23 (2007) 876-896.
39. Bate, P.: The prediction of limit strains in steel sheet using a discrete slip plasticity model. Int. J. Mech. Sci. 26 (1984) 373-384
40. Bell, J. F.: The Experimental Foundations of Solid Mechanics. In: Truesdell, C. (ed.): Mechanics of Solids. Vol. I Springer-Verlag, Berlin Heidelberg New York (1984)
41. Berstad, T. et al.: FEM and a microstructure based work-hardening model used to calculate FLCs. In: Stören, S. (ed.): Proc. 7 ESAFORM Conference on Material Forming. Trondheim, (2004) 131-134
42. Boehler, J. P., Demmerle, S., Koss, S.: A new direct biaxial testing machine for anisotropic materials. Exp. Mech. 34 (1984) 1-9
43. Boger, R. K., Wagoner, R. H., Barlat, F., Lee M. G., Chung, K.: Continuous, large strain, tension/compression testing of sheet material. Int. J. Plasticity 21 (2005) 2319-2343
44. Borsutzki, M., Keßler, L., Sonne, H-M.: Kennzeichnung des Verfestigungsverhaltens von Werkstoffen mit der Biaxialprüfung. In: Werkstoffprüfung 2002, Proc. DVM-Conference, Bad Nauheim (2002) 186 (in German)
45. Boudeau, N., Gelin J. C., Salhi S.: Computational prediction of the localized necking in sheet forming based on microstructural material aspects. Computational Materials Science 11 (1998) 45-64
46. Boudeau, N., Gelin, J. C.: Necking in sheet metal forming. Influence of macroscopic and microscopic properties of materials. Int. J. Mech. Sciences 42 (2000) 2209-2232
47. Bragard, A., Baret, J. C., Bonnarens, H.: A simplified technique to determine the FLD at onset of necking. CRM 33 (1972) 53-63
48. Bressan, J. D., Williams, J. A.: The use of a shear instability criterion to predict local necking in sheet metal deformation. Int. J. Mech. Sciences 25 (1983) 155-168
49. Bron, F., Besson, J.: A yield function for anisotropic materials. Application to aluminum alloys. Int. J. Plasticity 20 (2003) 937-963
50. Brunet, M., Morestin, F.: Experimental and analytical necking studies of anisotropic sheet metals. J. Materials Process. Techn. 112 (2001) 214-226
51. Brunet, M., Morestin, F., Walter, H.: Damage modeling in sheet metals forming processes with experimental validations. In: Habraken, A. M. (ed.): Proc. 4th ESAFORM Conference on Material Forming. Liege (2001) 209-212
52. Brunet, M., Morestin, F., Walter, H.: Anisotropic ductile fracture in sheet metal forming processes using damage theory. In: Pietrzyk, M., Mitura, Z., Kaczmat, J. (eds.): Proc. 5th ESAFORM Conference on Material Forming. Krakow (2002) 135-138
53. Brunet, M., Morestin, F., Walter-Laberre, H.: Failure analysis of anisotropic sheet metals using a non-local plastic damage model. J. Materials Process. Techn. 170 (2005) 457-470
54. Brunet M., Clerc P.: Two prediction methods for ductile sheet metal failure, In: Proc. 10th ESAFORM Conference on Material Forming, Zaragoza (2007) (in press)
55. Butuc, C. et al.: A more general model for FLD prediction. J. Materials Proc. Techn. 125-126 (2002) 213-218
56. Butuc, C. et al.: Influence of constitutive equations and strain-path change on the forming limit diagram for 5182 Aluminum Alloy. In: Pietrzyk, M., Mitura, Z., Kaczmat, J. (eds.): Proc. 5th ESAFORM Conference on Material Forming, Krakow (2002) 715-719
57. Butuc, C., Gracio, J. J., Barata da Rocha, A.: A theoretical study on forming limit diagrams prediction. J. Material Proc. Techn., 142 (2003) 714-724
58. Butuc, C., Gracio, J. J., Barata da Rocha, A.: Application of the YLD 96 yield criterion on describing the anisotropy and formability of the BCC materials, In: Banabic, D. (ed.): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 391-394
59. Butuc, C. et al.: An experimental and theoretical analysis on the application of stressbased forming limit criterion. Int. J. Mech. Sci. 48 (2006) 414-429
60. Cao, J. et al.: Prediction of localized thinning in sheet metal using a general anisotropic yield criterion. Int. J. Plasticity 16 (2000) 1105-1129
61. Carleer, B., Sigvant, M.: Process Scatter with Respect to Material Scatter. In: Liewald, M. (ed.): New Developments in Sheet Metal Forming. Institute for Metal Forming Technology, University of Stuttgart (2006) 225-239
62. Cazacu, O., Barlat, F.: Generalization of Drucker's yield criterion to orthotropy. Mathematics and Mechanics of Solids. 6 (2001) 613-630
63. Cazacu, O., Barlat, F.: Application of representation theory to describe yielding of anisotropic aluminum alloys. Int. J. of Engng. Sci. 41 (2003) 1367-1385
64. Cazacu, O., Barlat, F.: A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals. Int. J. Plasticity 20 (2004) 2027-2045
65. Cazacu, O., Plunkett, B., Barlat, F.: Orthotropic yield criterion for hexagonal close packed metals. Int. J. Plasticity 22 (2006) 1171-1194
66. Chan, K. C., Tong G. Q.: Formability of high-strain-rate superplastic Al-4.4Cu-1.5Mg/21SiCW, composite under biaxial tension. Material Science Eng. A 340 (2003) 49-57
67. Chow, C. L. et al.: A unified damage approach for predicting FLDs. Trans ASME, J. Eng. Materials Techn. 119 (1997) 346-353
68. Chow, C. L., Yang X. J.: Prediction of the FLD on the basis of the damage criterion under non-proportional loading. Proc. Instn. Mechn. Eng. 215 C (2001) 405-414
69. Chow, C. L. et al.: Prediction of FLD for AL6111-T4 under non-proportional loading. Int. J. Mech. Sciences 43 (2001) 471-486
70. Demmerle, S., Boehler, J. P.: Optimal design of biaxial tensile cruciform specimens. J. Mech. Phys Solids 41 (1983) 143-181
71. d'Hayer, R., Bragard, A.: Determination of the limiting strains at the onset of necking. CRM 42 (1975) 33-35
72. Drucker, D. C.: Relation of experiments to mathematical theories of plasticity. J. Appl. Mech. 16 (1949) 349-35773.
73. Dudzinski, D., Molinari, A.: Instability of visco-plastic deformation in biaxial loading. C. R. Acad. Sci. Paris 307 (1988) 1315-1321
74. Evangelista, S. H. et al.: Implementing a modified Marciniak-Kuczynki model using the FEM for the simulation of sheet metal deep drawing. J. Materials Process. Techn. 130-131 (2002) 135-144
75. Feldmann, P., Schatz, M.: Effective evaluation of FLC-tests with the optical inprocess strain analysis system AUTOGRID. In: Hora, P. (ed): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH Zürich, Zürich (2006) 69-73
76. Ferron, G., Makinde, A. J.: Design and development of a biaxial strength testing device. J. Testing Eval. 16 (1988) 253-256
77. Fjeldbo, S. K. et al.: A numerical study on the onset of plastic instability in extruded materials with strong through-thickness texture variation. In: Banabic, D. (ed.): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 209-213
78. Fortunier, R.: Dual potentials and extremum work principles in single crystal plasticity. J. Mech. Phys. Solids 37 (1989) 779-790
79. Friebe, H., et al.: FLC determination and forming analysis by optical measurement system. In: Hora, P. (ed.): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH Zürich, Zürich (2006) 74-81
80. Ganjiani, M., Assempour, A.: An improved analytical approach for determination of FLD considering the effects of yield functions. J. Materials Process. Techn. 182 (2007) 598-607
81. Gänser, H. P., Werner, E. A., Fisher, F. D.: FLDs: a micromechanical approach. Int. J. Mech. Sciences. 42 (2000) 2041-2054
82. Gese, H., Dell, H.: Numerical prediction of FLC with the program CRACH. In: Hora, P. (ed): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH Zürich, Zürich (2006) 43-49
83. Gologanu, M. et al.: Recent extension of Gurson's model for porous ductile metals. In: Suquet, P. (ed.): Continuum Micromechanics. Springer-Verlag, Berlin Heidelberg New York (1997) 61-130
84. Gronostajski, J.: Application of limit stresses to determine limit strains at complex strain paths. Archiwum Hutnictwa. 30 (1985) 41-56
85. G'sell, C., Boni, S., Shrivastava, S.: Application of the plane simple shear test for determination of the plastic behaviour of solid polymers at large strains. J. Mater. Sci. 18 (1983) 903-918
86. Han, H. N., Kim, K. H.: A ductile fracture criterion in sheet metal forming process. J. Materials Process. Techn. 142 (2003) 231-238
87. Hashiguchi, K., Protasov, A.: Localized necking analysis by the subloading surface model with tangential-strain rate and anisotropy. Int. J. Plasticity 20 (2004) 1909-1930
88. Hecker, S. S.: A simple forming limit curve technique and results on aluminum alloys. In: proc. of the IDDRG Congress, Amsterdam (1972) 5. 1-5.8
89. Hecker, S. S.: Experimental studies of yield phenomena in biaxially loaded metals. In: Stricklin, J. A., Saczalski, K. H. (eds.): Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects. ASME, New York (1976) 1-33
90. Hershey, A. V.: The plasticity of an isotropic aggregate of anisotropic face centred cubic crystals. J. Appl. Mech. 21 (1954) 241-249
91. Hill, R.: A theory of the yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A 193 (1948) 281-297
92. Hill, R.: On discontinous plastic states, with special reference to localized necking in thin sheets. J. Mech. Phys. Sol. 1 (1952) 19-30
93. Hill, R.: Theoretical plasticity of textured aggregates. Math. Proc. Cambridge Philos. Soc. 85 (1979) 179-191
94. Hill, R.: Constitutive dual potential in classical plasticity. J. Mech. Phys. Solids 35 (1987) 23-33
95. Hill, R.: Constitutive modelling of orthotropic plasticity in sheet metals. J. Mech. Phys. Solids 38 (1990) 405-417
96. Hill, R.: A user-friendly theory of orthotropic plasticity in sheet metals. Int. J. Mech. Sci. 35 (1993) 19-25
97. Hill, R., Hecker, S. S., Stout, M. G.: An investigation of plastic flow and differential work hardening in orthotropic brass tubes under fluid pressure and axial load. Int. J. Solids Struct. 31 (1994) 2999-3021
98. Hiroi T., Nishimura H.: The influence of surface defects on the forming-limit diagram of sheet metal. J. Materials Process. Techn. 72 (1997) 102-109
99. Hiwatashi, S., Van Bael, A., Van Houtte, P., Teodosiu, C.: Prediction of the forming limit strains under strain-path changes: application of an anisotropic model based on texture and dislocation structure. Int. J. Plasticity 14 (1998) 647-669
100. Hoferlin, E., Van Bael, A., Van Houtte, P., Steyaert, G., DeMaré, C.: The design of a biaxial tensile test and its use for the validation of crystallographic yield loci. Modelling Simul. Mater. Sci. Eng. 8 (2000) 423-433
101. Hopperstad, O. S. et al.: A preliminary numerical study on the influence of PLC on the formability of aluminium alloys, In: Juster, N., Rosochowski, A. (eds.): Proc. 9th ESAFORM Conference on Material Forming. Glasgow, April 2006. AKAPIT, Krakow (2006) 315-318
102. Hora, P., Tong, L.: Prediction methods for ductile sheet metal failure using FE-simulation. In: Proc. of the IDDRG Congress. Lisbon (1994) 363-375
103. Hora, P., Tong, L., Reissner, J.: A prediction method for ductile sheet metal failure. In: Lee, J. K., Kinzel, G. L., Wagoner, R. H. (eds): Proc. of the NUMISHEET 1996 Conference, Dearborn (1996) 252-256
104. Hora, P., Krauer, J. (eds): Numerical and experimental methods in prediction of forming limits in sheet metal forming and tube hydroforming processes. FLC-Zürich 06 Conference, Zürich (2006)
105. Horstemeyer, M. F., Chiesa, M. L., Bamman, D. J.: Predicting FLDs with explicit and implicit FE codes. In: Proc. SAE Conference, Detroit (1994) 481-495
106. Hosford, W. F.: Texture strengthening. Metals. Eng. Quarterly 6 (1966) 13-19
107. Hosford, W. F.: A generalized isotropic yield criterion. J. Appl. Mech. Trans. ASME 39 (1972) 607-609
108. Hosford, W. F.: On yield loci of anisotropic cubic metals. In: Proceedings 7th North American Metalworking Conference., SME, Dearborn MI, (1979) 191-197
109. Hosford, W. F.: Comments on anisotropic yield criteria. Int. J. Mech. Sci. 27 (1985) 423-427
110. Hotz, W.: European efforts in standardization of FLC. In: Hora, P. (ed): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH Zürich, Zürich (2006) 24-25
111. Hu, Z., Rauch, E. F., Teodosiu, C.: Work hardening behavior of mild steel under stress reversal at large strains. Int. J. Plasticity 8 (1992) 839-856
112. Hu, J. G. et al.: Influence of damage and texture evolution on limit strain in biaxially stretched aluminium alloy sheets. Materials Science Eng. A 251 (1998) 243-250
113. Huang, H. M., Pan, J., Tang, S. C.: Failure prediction in anisotropic sheet metals under forming operations with consideration of rotating principal stretch directions. Int. J. Plasticity 16 (2000) 611-633
114. Ikegami, K.: Experimental Plasticity on the Anisotropy of Metals. In: Boehler, J. P., (ed.): Mechanical Behavior of Anisotropic Solids. Proceedings of the Euromech Colloquim 115, Colloques Inter. du CNRS, Paris (1979) 201-242
115. Inal, K., Neale, K. W., Aboutajeddine, A.: Forming limit comparisons for FCC and BCC sheets. Int. J. Plasticity 21 (2005) 1255-1266
116. ISO 12004: Metallic materials-sheet and strip-Determination of the forming limit curves. (2006)
117. Iwata, N., Matsui, M., Kato, T., Kaneko, K., Tsutamori, H., Suzuki, N., Gotoh, M.: Numerical prediction of spring-back behavior of a stamped metal sheet by considering material nonlinearity during unloading. In: Mori, K. (ed.): Proc. 7th Int. Conf. Numerical Methods in Industrial Forming Processes, Balkema (2001) 693
118. Janssens, K., Lambert, F., Vanrostenberghe, S., Vermeulen, M.: Statistical evaluation of the uncertainty of experimentally characterised forming limits of sheet steel. J. Materials Process. Techn. 112 (2001) 174-184
119. Jurco, P., Banabic, D.: A user-frienldy programme for calculating Forming Limit Diagrams. In: Banabic, D. (ed): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 423-427
120. Karafillis, A. P., Boyce, M. C.: A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41 (1993) 1859-1886
121. Kim, D., Barlat, F., Bouvier, S., Rabahallah, Balan, T., M., Chung, K.: Non-quadratic anisotropic potential based on linear transformation of plastic strain rate. Int. J. Plasticity (2007) (in press)
122. Kim, K. J. et al.: Formability of AA5182/polypropilylene/AA5182 sandwich sheets. J. Materials Process. Technol. 139 (2003) 1-7
123. Knockaert, R. et al.: Forming limits prediction using rate-independent polycrystalline plasticity. Int. J. Plasticity 16 (2000) 179-198
124. Kobayashi, T., Ishigaki, H., Tadayuki, A.: Effect of strain ratios on the deforming limit of steel sheet and its application to the actual press forming. In: Proc. of the IDDRG Congress, Amsterdam (1972) 8.1-8.4
125. Kreißig, R., Schindler, J.: Some experimental results on yield condition in plane stress state. Acta Mech. 65 (1986) 169-179
126. Kuroda, M., Tvergaard, V.: Use of abrupt strain path change for determining subsequent yield surface: illustrations of basic idea. Acta Mater. 47 (1999) 3879-3890
127. Kuroda M., Tvergaard V.: FLD for anisotropic metal sheets with different yield criteria. Int. J. Solids Struct. 37 (2000) 5037-5059
128. Kuroda M., Tvergaard V.: Effect of strain path change on limits to ductility pf anisotropic metal sheets. Int. J. Mech. Sciences 42 (2000) 867-887
129. Kuroda, M.: Effects of texture on mechanical properties of aluminium alloys sheets and texture optimization strategy. In: Smith, L. M., Pourboghrat, F., Yoon, J.-W., Stoughton, T. B. (eds): Proc. of the NUMISHEET 2005 Conf. AIP (2005) 445-450
130. Kuwabara, T., Ikeda, S., Kuroda, T.: Measurement and Analysis of Differential Work hardening in Cold-Rolled Steel Sheet under Biaxial Tension. J. Materials Process. Technol. 80-81 (1998) 517-523
131. Kuwabara, T., Kuroda, M., Tvergaard, V., Nomura, K.: Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheets. Acta Mater. 48 (2000) 2071-2079.
132. Kuwabara, T., Nagata, K., Nakako, T.: Measurement and analysis of the Bauschinger effect of sheet metals subjected to in-plane stress reversals. In: Torralba, J. M. (ed.): Proc. AMPT'01, Univ. Carlos III de Madrid, Madrid (2001) 407
133. Kuwabara, T., Van Bael, A., Iizuka, E.: Measurement and Analysis of Yield Locus and Work hardening Characteristics of Steel Sheets with Different R-values. Acta Mater. 50 (2002) 3717-3729
134. Kuwabara, T., Ishiki, M., Kuroda, M., Takahashi, S.: Yield Locus and Work-Hardening Behavior of a Thin-Walled Steel Tube Subjected to Combined Tension-Internal Pressure. Journal de Physique IV 105 (2003) 347-354
135. Kuwabara, T., Yoshida, K., Narihara, K., Takahashi S.: Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure. Int. J. Plasticity 21 (2005) 101-117
136. Kuwabara, T.: Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations. Int. J. Plasticity 23 (2007) 385-419
137. Lademo, O. G., Berstad, T., Hopperstad, O. S., Pedersen, K. O.: A numerical tool for formability analysis of aluminium alloys. Steel Grips 2 (2004) Suppl. Metal Forming 2004, Krakow (2004) 427-437
138. Lademo O. G. et al.: Prediction of plastic instability in extruded aluminium alloys using shell analysis and a coupled model of elasto-plasticity and damage. J. Materials Process. Techn. 166 (2005) 247-255
139. Lee, D., Backofen, W. A.: An experimental determination of the yield locus for titanium and titanium-alloy sheet. Trans. TMS-AIME 236 (1966) 1077-1084
140. Lee W. B., Tai W. H., Tang C. Y.: Damage evolution and forming limit predictions of an AA2024-T3 aluminium alloy. J. Material Process. Techn. 63 (1997) 100-104
141. Lemaitre, J. (ed.): Continuous damage. In: Handbook of Materials Behavior Models, Academic Press, San Diego, CA, (2001) 411-793
142. Lewison, D. J., Lee, D.: Determination of Forming Limits by Digital Image Processing Methods. In: Proceedings of International Body Engineering Conference and Exposition (IBEC), Detroit (MI) (1999) (Paper 01-3168)
143. Li, S., Hoferlin, E., Van Bael, A., Van Houtte, P.: Application of a texture-based plastic potential in earing prediction of an IF steel. Adv. Eng. Materials (2001) 990-994
144. Liebertz, H. et al.: Guideline for the determination of forming limit curves. In: Proc. of the IDDRG Conference, Sindelfilgen (2004) 216-224
145. Lin, S. B., Ding, J. L.: Experimental study of the plastic yielding of rolled sheet metals with the cruciform plate specimen. Int. J. Plasticity 11 (1995) 583-604
146. Liu, C., Huang, Y., Stout, M. G.: On the asymmetric yield surface of plastically orthotropic materials: A phenomenological study. Acta Mater. 45 (1997) 2397-2406
147. Logan, R. W., Hosford, W. F.: Upper-bound anisotropic yield locus calculations assuming pencil glide. Int. J. Mech. Sci. 22 (1980) 419-430
148. Lou, X. Y., Li, M., Boger, R. K., Agnew, S. R., Wagoner, R. H.: Hardening evolution of AZ31B Mg sheet. Int. J. Plasticity 23 (2007) 44-86
149. Lowden, M. A. W., Hutchinson, W. B.: Texture strengthening and strength differential in titanium-6A-4V. Metall. Trans. 6 A (1975) 441-448
150. Makinde, A., Thibodeau, L., Neale, K. W.: Development of an apparatus for biaxial testing using cruciform specimens. Exp. Mech. 32 (1992) 138-144
151. Maeda, Y., Yanagawa, M., Barlat, F., Chung, K., Hayashida, Y., Hattori, S., Matsui, K., Brem, J. C., Lege, D. J., Murtha, S. J., Ishikawa, T.: Experimental analysis of aluminum yield surface for binary Al-Mg alloy sheet samples. Int. J. Plasticity 14 (1998) 301-318
152. Marciniak, Z., Kuczynski, K.: Limit strains in the processes of stretch forming sheet metal. Int. J. Mechan. Sciences 9 (1967) 609-620
153. Marron, G. et al.: A new necking criterion for the Forming Limit Diagrams, IDDRG 1997 WG Meeting, Haugesund (1997)
154. McDowell, D. L.: Modeling and experiments in plasticity. Int. J. Solids Struct. 37 (2000) 293-309
155. McGinty, R., McDowell, D. L.: Application of multiscale crystal plasticity models to FLD. Trans. ASME., J. Eng. Mater. Techn. 126 (2004) 285-291
156. Mellor, P. B.: Sheet metal forming. Int. Metals Review 1 (1981) 1-20
157. Methods of determining the forming limit curve. IDDRG Meeting, Zurich (1983)
158. Michno, M. J. Jr., Findley, W. N.: An historical perspective of yield surface investigations for metals. Int. J. Non-Linear Mech. 11 (1976) 59-82
159. Miyauchi, K.: Bauschinger effect in planar shear deformation of sheet metals. In: Advanced Technology of Plasticity, Proc. 1st Int. Conf. Technology of Plasticity, The Japan Society for Technology of Plasticity, Tokyo, (1984) 623
160. Müller, W., Pöhlandt, K., J.: New experiments for determining yield loci of sheet metal. J. Materials Process. Techn. 60 (1996) 643-648
161. Nakazima, K., Kikuma, M., Hasuka, K.: Study on the formability of steel sheets. Yawata Tech. Rep. No. 284 (1971) 678-680
162. Nandedkar, V. M., Narashimhan, K.: Prediction of forming limits incorporating workhardening behavior. In: Gelin, J. C., Picart, P. (eds): Proc. of the NUMISHEET 1999 Conference, Besancon (1999) 437-442
163. Narashimhan, K., Wagoner, R. H.: Finite Element Modeling simulation of in-plane FLD of sheets containing finite defects. Metallurgical Trans. 22 A (1991) 2655-2665
164. Paraianu, L., Banabic, D.: Calculation of Forming Limit Diagrams Using a Finite Element Model. In: Banabic, D. (ed.): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca, April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 419-423
165. Paraianu, L., Comsa, D. S., Gracio, J. J., Banabic, D.: Influence of yield locus and strain-rate sensitivity on the Forming Limit Diagrams. In: Juster N., Rosochowski A. (eds.): Proc. 9th ESAFORM Conference on Material Forming, Glasgow, April 2006, The Publishing House AKAPIT, Krakow (2006) 343-346
166. Phillips, A.: A review of quasistatic experimental plasticity and viscoplasticity. Int. J. Plasticity 2 (1986) 315-328
167. Plunkett, B., Lebensohn, R. A., Cazacu, O., Barlat, F.: Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening. Acta Materialia 54 (2006) 4159-4169
168. Rajarajan G. et al.: Validation of the non-linear strain-path model CRACH to enhance the interpretation of FE simulations in multistage forming operations, In: Banabic, D. (ed.): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca, April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 387-390
169. Ragab A. R., Saleh, C.: Effect of void growth on the predicting forming limit strains for planar isotropic sheet metals. Mechanics of Materials 32 (2000) 71-84
170. Ragab, A. R., Saleh, C., Zaafarani, N. N.: Forming limit diagrams for kinematically hardened voided sheet metals. J. Materials Process. Techn. 128 (2002) 302-312
171. Rechberger, F., Till, E. T.: Influence of scatter of materials properties on the formability of parts. In: Kergen, R. (ed): Forming the future, Proc. IDDRG 2004 Conference, Sindelfingen (2004) 236-245
172. Savoie J. et al.: Prediction of the FLD using crystal plasticity model. Materials Science Eng. A257 (1998) 128-133
173. Shakeri, M., Sadough, A., Dariani, B. M.: Effect of pre-straining and grain size on the limit strains in sheet metal forming. Proc. Instn. Mech. Engrs. 214 B (2000) 821-827
174. Schatz, M., Keller, S., Feldmann, P.: Experimental determination of the FLD for sheet thickness from 2.5 to 5.0 mm (in German). UTF Science III (2005) 1-8
175. Shiratori, E., Ikegami, K.: Experimental study of the subsequent yield surface by using cross-shaped specimens. J. Mech. Phys Solids 16 (1968) 373-394
176. Spitzig, W. A., Richmond, O.: The effect of pressure on the flow stress of metals. Acta Metall. 32 (1984) 457-463
177. Stout, M. G., Kocks, U. F.: Effects of Texture on Plasticity. In: Kocks, U. F., Tomé, C. N., Wenk, H.-R. (eds.): Texture and Anisotropy, Cambridge University Press, Cambridge, (1998) 420-465
178. Stoughton, T. B.: A general forming limit criterion for sheet metal forming. Int. J. Mech. Sci. 42 (2000) 1-27
179. Stoughton, T. B., Zhu, X.: Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int. J. Plasticity 20 (2004) 1463-1486
180. Stoughton, T. B., Yoon, J. W.: Sheet metal formability analysis for anisotropic materials under non-proportional loading. Int. J. Mech. Sci. (in press)
181. Stören, S., Rice, J. R.: Localized necking in thin sheets. J. Mech. Phys. Solids 23 (1975) 421-441
182. Strano, M., Colosimo, B. M.: Logistic regression analysis for experimental determination of forming limit diagrams. Int. J. Machine Tools Manuf. 46 (2006) 673-682
183. Strano, M., Colosimo, B. M.: Ordinal logistic regression analysis for statistical determination of forming limit diagrams. In: In: Juster N., Rosochowski A. (eds.): Proc. 9 ESAFORM Conference on Material Forming, Glasgow, April 2006, The Publishing House AKAPIT, Krakow (2006) 303-306
184. Swift, H. W.: Plastic instability under plane stress. J. Mech. Phys. Sol. 1 (1952) 1-16
185. Szczepihski, W. (ed.): Experimental Methods in Mechanics of Solids, Elsevier, Amsterdam (1990)
186. Tai, W. H., Lee, W. B.: Finite element simulation of in plane forming processes of sheets containing plastic damage. In: Lee, J. K., Kinzel, G. L., Wagoner, R. H. (eds): Proc. of the NUMISHEET 1996 Conference, Dearborn (1996) 257-261
187. Takashina, K. et al.: Relation between the manufacturing conditions and the average strain according to the scribed circle tests in steel sheets. La Metallurgia Italiana 8 (1968) 757-765
188. Teixeira, P. et al.: Finite element prediction of fracture onset in sheet metal forming using a ductile damage model. In: Proc. of the IDDRG 2006 Conference, Porto (2006) 239-245
189. Teodosiu, C., Hu, H.: Microstructure in the continuum modeling of plastic anisotropy. In: Shen, S., Dawson, P. R. (eds.): Proc. of the Conference, NUMIFORM'95 on Simulation of Materials Processing, Theory, Methods and Applications, Balkema, Rotterdam (1995) 173
190. Tozawa, Y.: Plastic deformation behavior under conditions of combined stress. In: Koistinen, D. P., Wang, N-. M. (eds.): Mechanics of Sheet Metal Forming. Plenum Press, New York (1978) 81-110
191. Van der Boogaard, A. H., Huetink, J.: Prediction of sheet necking with shell finite element models. In:. Brucato, V. (ed.): Proc. 6th ESAFORM Conference on Material Forming, Salerno, April 2003, Nuova Ipsa Editore, Palermo (2003) 191-194
192. Van Houtte, P., Toth L. S.: Generalization of the Marciniak-Kuczynski defect model for predicting FLD. In: Lee, W. B. (ed.): Advances in Engineering Plasticity and its Application, Elsevier, Amsterdam (1993) 1013-1020
193. Van Houtte, P.: Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials. Int. J. Plasticity 10 (1994) 719-748
194. Van Houtte, P.: Yield loci based on crystallographic texture. In: Lemaitre, J. (ed.): Handbook of Materials Behavior Models, Academic Press, San Diego, CA (2001) 137-154
195. Van Houtte, P.: Anisotropy and formability in sheet metal drawing, In: Banabic, D. (ed.): Proc. 8th ESAFORM Conference on Material Forming. Cluj-Napoca, April 2005. The Publishing House of the Romanian Academy, Bucharest (2005) 339-342
196. Veerman, C. et al.: Determination of appearing and admissible strains in cold-reduced sheets. Sheet Metal Industries (1971) 687-694
197. Vegter, H., An, Y., Pijlman, H. H., Huetink, J.: Different approaches to describe the plastic material behaviour of steel and aluminium-alloys in sheet forming. In: Covas, J. A. (ed.): Proc. of the 2nd ESAFORM Conference on Material Forming. Guimaraes (1999) 127-132
198. Vegter, H., van den Boogaard, A. H.: A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states. Int. J. Plasticity 22 (2006) 557-580
199. Viatkina, E. M. et al.: Forming Limit Diagrams for sheet deformation process: a crystal plasticity approach. In: Habraken, A. M. (ed.): Proc. of the 4nd ESAFORM Conference on Material Forming, Liege (2001) 465-468
200. Volk, W.: New experimental and numerical approach in the evaluation of the FLD with the FE-method. In: Hora, P. (ed): Numerical and experimental methods in prediction of forming limits in sheet forming and tube hydroforming processes. ETH, Zürich, (2006) 26-30
201. Vos, M., Banabic, D.: The Forming Limit Band - a new tool for increasing the robustness in the simulation of sheet metal forming processes. Proc. of the IDDRG 2007 Conference, Gyor (2007) (in press)
202. Wagoner, R. H., Chan, K. S., Keeler, S. P. (eds): Forming Limit Diagrams: Concepts, Methods, and Applications. TMS, Warrendale (1989)
203. Weinmann, K. J., Rosenberger, A. H., Sanchez, L. R.: The Bauschinger effect of sheet metal under cyclic reverse pure bending. Ann. CIRP 37 (1988) 289-293
204. Wu, P. D., Neale, K. W., Van der Giessen, E.: On crystal plasticity FLD analysis. Proc. R. Soc. London 453 (1997) 1831-1848
205. Wu, P. D. et al.: Crystal plasticity FLD analysis of rolled aluminium sheets. Metallurgical Trans. 29 A (1998) 527-535
206. Wu, P. D., MacEwen, S. R., Lloyd, D. J., Neale, K. W.: A mesoscopic approach for predicting sheet metal formability. Model. Simul. Mater. Sci. Eng. 12 (2004) 511-527
207. Wu, P. D., Graf, A., MacEwen, S. R., Lloyd, D. J., Jain, M. Neale, K. W.: On forming limit stress diagram analysis. Int. J. Solids Struct. 42 (2005) 2225-2241
208. Xu, Y.: Modern Formability: Measurement, Analysis and Applications. Hanser Gardner Publications (2006)
209. Yao, H., Cao, J.: Prediction of FLC using an anisotropic yield function with prestrain induced prestress. Int. J. Plasticity 18 (2002) 1013-1038
210. Yoon, J. W., Barlat, F., Dick, R. E., Chung, K., Kang, T. J.: Plane stress yield function for aluminum alloy sheets-Part II: FE formulation and its implementation, Int. J. Plasticity 20 (2004) 495-522
211. Yoon, J. W., Barlat, F., Dick, R. E., Karabin, M. E.: Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int. J. Plasticity 22 (2006) 174-193
212. Yoon, J. W., Barlat, F.: Modeling and simulation of the forming of aluminium sheet alloys, In: Semiatin, S. L. (ed): ASM Handbook, Vol 14B, Metalworking: Sheet forming, ASM International, Materials Park, OH (2006) 792-826
213. Yoshida, F., Urabe, M., Toropov, V. V.: Identification of material parameters in constitutive model for sheet metals from cyclic bending tests. Int. J. Mech. Sci. 40 (1998) 237-249
214. Yoshida, F., Uemori, T., Fujiwara, K.: Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. Int. J. Plasticity 18 (2002) 633-659
215. Yoshida, K., Kuwabara, T., Narihara, K., Takahashi S.: Experimental verification of the path-independence of forming limit stresses. Int. J. Forming Processes 8 (SI) (2005) 283-298
216. Yoshida, K., Kuwabara, T., Kuroda, M.: Path-dependence of the forming limit stresses in a sheet metal, Int. J. Plasticity 23 (2007) 361-384
217. Yoshida, K., Kuwabara, T.: Effect of strain hardening behavior on forming limit stresses of steel tube subjected to non-proportional loading paths. Int. J. Plasticity (2007) (in press)
218. Yu, M. H.: Advances in strength theories for materials under complex stress state in the 20 Century. Appl. Mech. Rev. 55 (2002) 198-218
219. Zhou, D., Wagoner R. H.: Use of arbitrary yield function in FEM. In: Boehler, J. P., Khan, A. S. (eds): Anisotropy and localization of plastic deformation. Elsevier, Amsterdam (1991) 688-691
220. Zhou, Y., Neale K. W.: Predictions of FLD using a rate sensitive crystal plasticity model. Int. J. Mech. Sciences 37 (1995) 1-20
221. Zyczkowski, M.: Combined Loadings in the Theory of Plasticity, Polish Scientific Publisher, Warsaw (1981)
222. Zyczkowski, M.: Anisotropic yield condition. In: Handbook of Materials Behaviour Models. Lemaitre, J. (ed.): Academic Press, San Diego CA (2001) 155-165