Numerical restrictions of the modified maximum force criterion for prediction of forming limits in sheet metal forming

Modelling and Simulation in Materials Science and Engineering

Volumn 12, Issue 4, 2004, Pages 677-692

  Aretz, Holger ^a  

^a NONE   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; GRAIN SIZE AND SHAPE; HARDENING; MATHEMATICAL MODELS; MECHANICAL ENGINEERING; PLASTICITY; SHEET METAL; STRAIN;

FORMING LIMIT CURVE (FLC); FORMING LIMIT DIAGRAM (FLD); MODIFIED MAXIMUM FORCE CRITERION (MMFC); ORTHOTROPIC MATERIALS;

METAL FORMING;

EID: 3142609137     PISSN: 09650393     EISSN: None     Source Type: Journal    
DOI: 10.1088/0965-0393/12/4/009     Document Type: Article

References (53)

1. Arrieux R 1995 Determination and use of the forming limit stress diagrams in sheet metal forming J. Mater. Process. Technol. 53 47-56
2. Ávila A F and Vieira E L S 2003 Proposing a better forming limit diagram prediction: a comparative study J. Mater. Process. Technol. 141 101-8
3. Banabic D, Bunge H-J, Pöhlandt K and Tekkaya A E 2000 Formability of Metallic Materials (Berlin: Springer)
4. Banabic D and Dannemann E 2001 Prediction of the influence of yield locus on the limit strains in sheet metals J. Mater. Process. Technol. 109 9-12
5. Barlat F 1987 Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals Mater. Sci. Eng. 91 55-72
6. Barlat F 1989 Forming limit diagrams - predictions based on some microstructural aspects of materials Forming Limit Diagrams: Concepts, Methods and Applications ed R H Wagoner et al (The Minerals, Metals & Materials Scociety) pp 275-301
7. Barlat F, Brem J C, Yoon J W, Chung K, Dick R E, Choi S-H, Pourboghrat F, Chu E and Lege D J 2003 Plane stress yield function for aluminium alloy sheets - Part 1: Theory Int. J. Plasticity 19 1297-319
8. Brunet M, Mguil S and Morestin F 1998 Analytical and experimental studies of necking in sheet metal forming processes J. Mater. Process. Technol. 80-81 40-6
9. Brunet M and Morestin F 2001 Experimental and analytical necking studies of anisotropic sheet metals J. Mater. Process. Technol. 112 214-26
10. Butuc M C, Barata da Rocha A, Gracio J J and Ferreira Duarte J 2002 A more general model for forming limit diagrams prediction J. Mater. Process. Technol. 125-126 213-18
11. Butuc M C, Barata da Rocha A, Gracio J J and Ferreira Duarte J 2003 Study on forming limit diagrams prediction using a phenomenological and a physical approach of plasticity theory J. Phys. IV (France) 105 73-80
12. Chakrabarty J, Lee W B and Chan K C 1999 A new theoretical model for predicting limit strains in the punch stretching of sheet metals J. Mater. Process. Technol. 91 257-63
13. Chow C L, Yu L G, Tai W H and Demeri M Y 2001 Prediction of forming limit diagrams for AL6111-T4 under non-proportional loading Int. J. Mech. Sci. 43 471-86
14. Chow C L and Yang X J 2003 Prediction of forming limit diagram with mixed anisotropic kinematic-isotropic hardening plastic constitutive model based on stress criteria J. Mater. Process. Technol. 133 304-10
15. Friedman P A and Pan J 2000 Effects of plastic anisotropy and yield criteria on prediction of forming limit curves Int. J. Mech. Sci. 42 29-48
16. Goodwin G M 1968 Application of strain analysis to sheet metal forming problems in the press shop Metall. Ital. 8 767-74
17. Haddad A, Vacher P and Arrieux R 1999 Numerical determination of forming limit diagrams of orthotropic sheets using the '3G' theory of plasticity J. Mater. Process. Technol. 92-93 419-23
18. Hill R 1998 The Mathematical Theory of Plasticity (Oxford: Clarendon) (reprint)
19. Hill R 1948 A theory of the yielding and plastic flow of anisotropic metals Proc. R. Soc. Land. A 193 281-97
20. Hill R 1952 On discontinous plastic states, with special reference to localized necking in thin sheets J. Mech. Phys. Solids 119-30
21. Hill R 1993 A user-friendly theory of orthotropic plasticity in sheet metals Int. J. Mech. Sci. 15 19-25
22. Hiwatashi S, Van Bael A, Van Houtte P and Teodosiu C 1998 Prediction of forming limit strains under strain-path changes: application of an anisotropic model based on texture and dislocation structure Int. J. Plasticity 14 647-69
23. Hora P, long L and Reissner J 1996 A prediction method for ductile sheet metal failure in FE-simulation Proc. Numisheet'96 Conf. (Dearborn, Michigan: USA) pp 252-6
24. Hosford W F and Caddell R M 1993 Metal Forming-Mechanics and Metallurgy 2nd edn (Englewood Cliff, NJ: Prentice Hall)
25. Hu J, Jonas J J, Zhou Y and Ishikawa T 1998 Influence of damage and texture evolution on limit strain in biaxially stretched aluminum alloy sheets Mater. Sci. Eng. A 251243-50
26. Keeler S P and Backofen WA 1963 Plastic instability and fracture in sheets stretched over rigid punchs Trans. ASM 56 25-48
27. Knockaert R, Massoni E and Chastel Y 2000 Prediction of strain localization during sheet forming operations Proc. 3rd ESAFORM Conf. on Material Forming pp II-7-10
28. Kowalczyk K and Gambin W 2004 Model of plastic anisotropy with texture-dependent yield surface Int. J. Plasticity 20 19-54
29. Kuroda M and Tvergaard V 2000 Forming limit diagrams for anisotropic metal sheets with different yield criteria Int. J. Solids Struct. 37 5037-59
30. Lian J and Zhou D 1989 Diffuse necking and localized necking under plane stress Mater. Sci. Eng. A 111 1-7
31. Lian J, Barlat F and Baudelet B 1989 Plastic behaviour and stretchability of sheet metals. Part II: Effect of yield surface shape on sheet forming limit Int. J. Plasticity 5 131-47
32. Marciniak Z and Kuczynski K 1967 Limit strains in the process of stretch-forming sheet metal Int. J. Mech. Sci. 9 609-20
33. Marciniak Z, Kuczynski K and Pokora T 1973 Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension Int. J. Mech. Sci. 15 789-805
34. Marciniak Z, Duncan J L and Hu S J 2002 Mechanics of Sheet Metal Forming 2nd edn (Portsmouth, NH: Butterworth-Heinemann)
35. Mesrar R, Fromentin S, Makkouk R, Martiny M and Perron G 1998 Limits to the ductility of metal sheets subjected to complex strain-paths Int. J. Plasticity 14 391-411
36. Ragab A R, Saleh Ch and Zaafarani N N 2002 Forming limit diagrams for kinematically hardened voided sheet metals J. Mater. Process. Technol. 128 302-12
37. Rasmussen S N 1982 Effect of rounded vertices in the yield surface on localized necking in biaxially stretched sheets Int. J. Mech. Sci. 24 729-39
38. Barata da Rocha A, Barlat F and Jalinier J M 1984-1985 Prediction of the forming limit diagrams of anisotropic sheets in linear and non-linear loading Mater. Sci. Eng. 68 151-64
39. Savoie J, Jain M, Carr A R, Wu P D, Neale K W, Zhou Y and Jonas J J 1998 Predictions of forming limit diagrams using crystal plasticity models Mater. Sci. Eng. A 257 128-33
40. Swift H W 1952 Plastic instability under plane stress J. Mech. Phys. Solids 11-18
41. Tang C Y and Tai W H 2000 Material damage and forming limits of textured sheet metals J. Mater. Process. Technol. 99 135-40
42. Tardos A K and Mellor P B 1975 Some comments on the limit strains in sheet metal stretching Int. J. Mech. Sci. 17 203-10
43. Töth L, Hirsch J and van Houtte P 1996 On the role of texture development in the forming limits of sheet metals Int. J. Mech. Sci. 381117-26
44. Tvergaard V 1978 Effect of kinematic hardening on localized necking in biaxially stretched sheets Int. J. Mech. Sci. 20651-8
45. Vacher P, Arrieux R and Tabourot L 1998 Analysis of a criterion of deep drawing operation capability for thin orthotropic sheets J. Mater. Process. Technol. 78 190-7
46. Wilson D V, Mirshams A R and Roberts W T 1983 An experimental study of the effect of sheet thickness and grain size on limit-strains in biaxial stretching Int. J. Mech. Sci. 25 859-70
47. Wu P D, Jain M, Savoie J, MacEwen S R, Tugcu P and Neale K W 2003 Evaluation of anisotropic yield functions for aluminum sheets Int. J. Plasticity 19 121-38
48. Xu S and Weinmann K J 2000 Effect of deformation-dependent material parameters on forming limits of thin sheets Int. J. Mech. Sci. 42 677-92
49. Yao H and Cao J 2002 Prediction of forming limit curves using an anisotropic yield function with prestrain induced backsttess Int. J. Plasticity 18 1013-38
50. Yoon J W, Barlat F, Chung K, Pourboghrat F and Yang D Y 2000 Earing predictions based on asymmetric nonquadratic yield function Int. J. Plasticity 16 1075-104
51. Zeghloul A, Mesrar R and Perron G 1990 Analytical expressions of the forming limits in biaxially stretched sheets Int. J. Mech. Sci. 32 981-90
52. Zhou Y and Neale K W 1995 Predictions of forming limit diagrams using a rate-sensitive crystal plasticity model Int. J. Mech. Sci. 37 1-20
53. Zhao L, Sowerby R and Sklad M P 1996 A theoretical and experimental investigation of limit strains in sheet metal forming Int. J. Mech. Sci. 38 1307-17