A unified damage approach for predicting forming limit diagrams

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 119, Issue 4, 1997, Pages 346-353

  Chow, C L ^a   Yu, L G ^a   Demeri, M Y ^b  

^a Department of Electrical and Computer Engineering   (United States)

^b FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRACTURE MECHANICS; MATHEMATICAL MODELS; MECHANICAL VARIABLES MEASUREMENT; METAL FORMING; NUMERICAL METHODS; PHASE DIAGRAMS; PLASTICITY; SHEET METAL; STRETCHING;

DIFFUSE NECHING; FORMING LIMIT DIAGRAMS; THEORY OF DAMAGE MECHANICS; UNIFORM DEFORMATION;

PLASTIC DEFORMATION;

EID: 0031246401     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2812269     Document Type: Article

References (49)

1. Arrieux, R., Bedrin, C., and Boiven, M., 1982, Proc. 12th 1DORG Congress, Italy, p. 61.
2. Azrin, M., and Backofen, W. A., 1970, “The Deformation and Failure of a Biaxially Stretched Sheet,” Met. Trans., Vol. 1, p. 2857.
3. Bassani, J. L., Hutchison, J. W., and Neal, K. W., 1979, Metal Forming Plasticity Symposium, H. Lippman, ed. Springer-Verlag, Berlin, 1.
4. Bammann, D. J., 1990, “Modeling Temperature and Strain Rate Dependent Large Deformation of Metals,” Applied Mechanics Review, Vol. 43, p. S312.
5. Beaudoin, A. J., Koya, T., Smith, P. E. and Wiese, J W., 1995, “Experiences in the Use of an Evolutionary Damage Model With LS-DYNA3D, SAE 95-0915, p. 113.
6. Chaboche, J. L., 1984, “Anisotropic Creep Damage in the Framework of Continuum Damage Mechanics,” Nuclear Engineering and Design, Vol. 79, p. 309.
7. Chaboche, J. L., and Lesne, P. M., 1988, “A Non-Linear Continuous Fatigue Damage Model,” Fatigue Fract. Engng. Mater. Struct. 11, p. 1.
8. Chow, C. L. and Lu, T. J., 1989, “On Evolution Laws of Anisotropic Damage,” Engineering Fracture Mechanics, Vol. 34, p. 53.
9. Chow, C. L., and Chen, X. F., 1992, “An Anisotropic Model of Continuum Damage Mechanics Based on Endochronic Theory of Plasticity,” International Journal of Fracture, Vol. 55, p. 115.
10. Chow, C. L., and Wang, J., 1987a, “An anisotropic theory of elasticity for continuum damage mechanics,” International Journal of Fracture, Vol. 33, p. 3.
11. Chow, C. L., and Wang, J., 1987b, “An Anisotropic Theory of Continuum Damage Mechanics for Ductile Fracture,” Engineering Fracture Mechanics, Vol. 27, p. 547.
12. Chow, C. L., and Wang, J., 1987c, “An Anisotropic Continuum Damage Theory and Its Application to Ductile Crack Initiation,” Damage Mechanics in Composites, ASME AD, 12, 1.
13. Chow, C. L., and Wang, J., 1988a, “Ductile Fracture Characterization with an Anisotropic Continuum Damage Theory,” Engineering Fracture Mechanics, Vol. 30, p. 547.
14. Chow, C. L., and Wang, J., 1988b, “A Finite Element Analysis of Continuum Damage Mechanics for Ductile Fracture,” International Journal of Fracture, Vol. 38, p. 83.
15. Chow, C. L., and Wei, Y., 1991a, “A Damage Mechanics Model of Fatigue Crack Initiation in Notched Plates,” Theory. Appl. Fract. Mech. 16, p. 123.
16. Chow, C. L. and Wei, Y., 1991b, “A Model of Continuum Damage Mechanics for Fatigue Failure,” Int. J. Fract., Vol. 50, p. 301.
17. Chow, C. L., Yu, L. G. and Demeri, M. Y., 1996, “Prediction of Forming Limit Diagram with Damage Mechanics,” SAE Paper 960598.
18. Chow, C. L., Yu, L. G. and Duggan, B. J., 1993, “An Orthotropic Model of Damage Mechanics for Metal Fatigue,” ASME Winter Annual Meeting, New Orleans, LA, Nov. 28-Dec. 3, AD-Vol. 36, p. 1.
19. Cordebois, J. P., and Sidoroff, F., 1979, “Damage Induced Elastic Anisotropy,” Euromech Colloquium 115, Comportement M, Canique des Solides Anisotropes, Grenoble, pp. 761-774.
20. Ghosh, A. K., and Hecker, S. S., 1974, “Stretching Limits in Sheet Metals: InPlane Versus Out-of-Plane Deformation,” Metal. Trans., Vol. 5, p. 2161.
21. Ghosh, A. K., and Hecker, S. S., 1975, “Failure in Thin Sheets Stretched over Rigid Punches,” Metal. Trans. 6A, p. 1065.
22. Gronostajski, J., Dolny, A., and Sobis, T., 1982, Proc. 12th IDDRG Congress, Italy, p. 39.
23. Gurson, A. L., 1975, “Plastic Flow and Fracture Behavior of Ductile Materials Incorporating Nucleation, Growth and Interaction,” Ph.D. thesis, Brown University (available from University Microfilms, Ann Arbor, MI).
24. Gurson, A. L., 1977, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I-Yield Criteria and Flow Rules for Porous Ductile Materials,” ASME Journal of Engineering Materials and Technology, Vol. 99, p. 2.
25. Hecker, S. S., 1975a, “Simple Technique for Determining FLC,” Sheet Metal Ind., Nov., p. 671.
26. Hecker, S. S., 1975b, ASME Journal of Engineering Materials and Technology, Vol. 97, p. 66.
27. Hill, R., 1950, The Mathematical Theory of Plasticity, University Press, Oxford.
28. Hill, R., 1952, “On Discontinuous Plastic States with Special Reference to Localized Necking in the Sheet,” J. Mech. Phys. Solids, Vol. 1, p. 19.
29. Hutchinson, J. W., Neale, K. W., and Needleman, A., 1978, “Sheet Necking-I: Validity of Plane Stress Assumptions of the Long-Wavelength Approximation,” Koistinen, D. P. and Wang, N. M. eds., GMR Symposium Mechanics of Metal Forming, Plenum Press, New York, p. 111.
30. Hutchinson, J. W., and Neale, K. W., 1978a, “Sheet necking-II: Time-independent behavior,” Koistinen, D. P. and Wang, N. M. eds., GMR Symposium Mechanics of Metal Forming, Plenum Press, New York, p. 127.
31. Hutchinson, J. W., and Neale, K. W., 1978b, “Sheet necking-III: Strain-rate effects,” Koistinen, D. P. and Wang, N. M. eds., GMR Symposium Mechanics of Metal Forming, Plenum Press, New York, p. 269.
32. Hutchinson, W. B., and Arthey, R., 1976, Scr. Metal. Vol. 10, p. 673.
33. Keeler, S. P., 1968, Machinery, Vol. 74.
34. Kikuma, T., and Nakazima, K., 1971, Iron Steel Inst. Japan, Vol. 11, p. 827.
35. Kobayashi, T., Ishigaki, H. and Abe, T., 1972, Proc. 7th IDDRG Congress, Amsterdam, p. 8.1.
36. Laukonis, J. V., and Gosh, A.k., 1978, “Effects of Strain Path Changes on the Formability of Sheet Metals,” Metal. Trans. 9A, p. 1849.
37. Lee, H., Peng, K., Lu, Y. B., and Yu, L. G., 1983, “An Orthogonal Anisotropic Ductile Damage Model Applicable to Deep-Drawing Forming Limits,” Journal of Huazhong University of Science and Technology, Vol. 11, p. 63 (in Chinese).
38. Lee, H., Wang, J., and Peng, K., 1985, “Anisotropic Damage Criterion for Deformation Instability and Its Application to the Forming Limit of Sheet Metal,” Journal of Huazhong University of Science and Technology, Vol. 13, p. 1 (in Chinese).
39. Lemaitre, J., 1983, “A Three-Dimensional Ductile Damage Model Applied to Deep-Drawing Forming Limits,” ICM4.
40. Loyd, D. J., and Sang, H., 1979, “The Influence of Strain Path on infsequent Mechanical Properties-Orthogonal Tensile Paths,” Metal. Trans. Vol. 10A, p. 1767.
41. Marciniak, Z., and Kuczynski, K., 1967, “Limit strains in the processes of stretch-forming sheet metal,” Int. J. Mech. Sci., Vol. 9, p. 609.
42. Marciniak, Z., Kuczynski, K. and Pokora, T., 1973, “Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension,” Int. J. Mech. Sci., Vol. 15, p. 789.
43. Needleman, A., and Rice, J. R., 1978, Mechanics of Sheet Metal Forming, D. P. Koistinen and N. M. Wang, eds., Plenum Press, New York, pp. 257-267.
44. Needleman, A., and Triantafyllidis, N., 1978, “Void Growth and Local Necking in Biaxially Stretched Sheets,” ASME Journal of Engineering Materials and Technology, Vol. J00, p. 164.
45. Painter, M. J., and Pearce, R., 1974, “Instability and Fracture in Sheet Metal,” J. Phys. D; Appl. Phys., Vol. 7, p. 992.
46. Ranta-Eskola, A., 1980, Proc. 11th IDDRG Congress, Metz, p. 453.
47. Schmitt, J. H., and Jalinier, J. M., 1982, “Damage in Sheet Metal Forming-I. Physical Behavior; Damage in Sheet Metal Forming-II. Plastic Instability,” Acta Metallurgica, Vol. 30, p. 1789.
48. Storen, S., and Rice, J. R., 1975, “Localized Necking in Thin Sheets,” J. Mech. Phys. Solids, Vol. 23, p. 421.
49. Tadros, A. K., and Mellor, P. B., 1975, “Some Comments on the Limit Strains in Sheet Metal Stretching,” Int. J. Mech. Sci., Vol. 17, p. 203.