Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate

International Journal of Plasticity

Volumn 23, Issue 8, 2007, Pages 1380-1399

  Kim, Daeyong ^a   Barlat, Frédéric ^b   Bouvier, Salima ^c   Rabahallah, Meziane ^d   Balan, Tudor ^d   Chung, Kwansoo ^e  

^a Hyundai Motor Co   (South Korea)

^b ALCOA TECHNICAL CENTER   (United States)

^c CNRS   (France)

^d UNIVERSITÉ PAUL VERLAINE METZ   (France)

^e Seoul National University   (South Korea)

Author keywords

Constitutive model; Plastic anisotropy; Sheet material; Strain rate potential

Indexed keywords

ANISOTROPY; CONSTITUTIVE MODELS; FINITE ELEMENT METHOD; PLASTIC DEFORMATION; PLASTICITY;

CONVEX FORMULATIONS; LINEAR TRANSFORMATIONS; SHEET MATERIALS; STRAIN RATE POTENTIALS;

STRAIN RATE;

EID: 34247529961     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.01.006     Document Type: Article

References (54)

1. Arminjon M., and Bacroix B. On plastic potentials for anisotropic metals and their derivation from the texture function. Acta Mech. 88 (1991) 219-243
2. Arminjon M., Imbault D., Bacroix B., and Raphanel J.L. A fourth-order plastic potential for anisotropic metals and its analytical calculation from the texture function. Acta Mech. 107 (1994) 33-51
3. Bacroix B., and Gilormini P. Finite-element simulations of earing in polycrystalline materials using a texture-adjusted strain-rate potential. Model. Simul. Mater. Sci. Eng. 3 (1995) 1-21
4. Barlat F., and Chung K. Anisotropic potentials for plastically deformation metals. Modell. Simul. Mater. Sci. Eng. 1 (1993) 403-416
5. Barlat F., and Chung K. Anisotropic strain rate potential for aluminum alloy plasticity. In: Banabic D. (Ed). Proceedings of the 8th ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, April 2005 (2005), The Publishing House of the Romanian Academy, Bucharest 415-418
6. Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic materials. Int. J. Plasticity 7 (1991) 693-712
7. Barlat F., Chung K., and Richmond O. Strain rate potential for metals and its application to minimum work path calculations. Int. J. Plasticity 9 (1993) 51-63
8. Barlat F., Chung K., and Richmond O. Anisotropic plastic potentials for polycrystals and application to the design of optimum blank shapes in sheet forming. Metall. Mater. Trans. A 25 (1994) 1209-1216
9. Barlat F., Maeda Y., Chung K., Yanagawa M., Brem J.C., Hayashida Y., Lege D.J., Matsui K., Murtha S.J., Hattori S., Becker R.C., and Makosey S. Yield function development for aluminum alloy sheets. J. Mech. Phys. Solids 45 (1997) 1727-1763
10. Barlat F., Brem J.C., Yoon J.W., Dick R.E., Choi S.H., Chung K., and Lege D.J. Constitutive modeling for aluminum sheet forming simulations. In: Khan A.S., Zhang H., and Yuan Y. (Eds). Proceedings of the 8th International Symposium on Plasticity and its Current Applications, Whistler, Canada, July 2000 (2000), Neat Press, Fulton, MD 591-593
11. Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., Choi S.-H., Pourboghrat F., Chu E., and Lege D.J. Plane stress yield function for aluminum alloy sheets. Int. J. Plasticity 19 (2003) 1297-1319
12. Barlat F., Aretz H., Yoon J.W., Karabin M.E., Brem J.C., and Dick R.E. Linear transformation-based anisotropic yield functions. Int. J. Plasticity 21 (2005) 1009-1039
13. Chung K. Forming analysis and design for hydroforming. Continuum Scale Simulation of Engineering Materials (2004), WILEY-VCH Verlag GmbH & Co. KGaA 763-775
14. Chung K., and Richmond O. Ideal forming, Part I: Homogeneous deformation with minimum plastic work. Int. J. Mech. Sci. 34 7 (1992) 575-591
15. Chung K., and Richmond O. Ideal forming, Part II: Sheet forming with optimum deformation. Int. J. Mech. Sci. 34 (1992) 617-633
16. Chung K., and Richmond O. A deformation theory of plasticity based on minimum work paths. Int. J. Plasticity 9 (1993) 907-920
17. Chung K., and Richmond O. Mechanics of ideal forming. J. Appl. Mech., ASME 61 (1994) 176
18. Chung K., and Shah K. Finite element simulation of sheet metal forming for planar anisotropic metals. Int. J. Plasticity 8 (1992) 453-476
19. Chung K., Lee S.Y., Barlat F., Keum Y.T., and Park J.M. Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential. Int. J. Plasticity 12 1 (1996) 93-115
20. Chung K., Barlat F., Brem J.C., Lege D.J., and Richmond O. Blank shape design for a planar anisotropic sheet based on ideal forming design theory and FEM analysis. Int. J. Mech. Sci. 39 1 (1997) 105-120
21. Chung K., Barlat F., Richmond O., and Yoon J.W. Blank design for a sheet forming application using the anisotropic strain-rate potential Srp98. In: Zabaras, et al. (Ed). The Integration of Material, Process and Product Design (1999), Balkema, Rotterdam 213-219
22. Chung K., Yoon J.W., and Richmond O. Ideal sheet forming with frictional constraints. Int. J. Plasticity 16 (2000) 595-610
23. Chung K., Lee M.-G., Kim D., Kim C., Wenner M.L., and Barlat F. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part I: Theory and formulation. Int. J. Plasticity 21 (2005) 861-882
24. Fortunier R. Dual potentials and extremum work principles in single crystal plasticity. J. Mech. Phys. Solids 37 (1989) 779
25. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc. R. Soc. Lond. A193 (1948) 281
26. Hill R. Theoretical plasticity of textured aggregates. Math. Proc. Camb. Phil. Soc. 85 (1979) 179
27. Hill R. Constitutive dual potentials in classical plasticity. J. Mech. Phys. Solids 35 (1987) 23
28. Hiwatashi S., Van Bael A., Van Houtte P., and Teodosiu C. Modelling of plastic anisotropy based on texture and dislocation structure. Comput. Mater. Sci. 9 (1997) 274
29. Hu J.G., Jonas J.J., and Ishikawa T. FEM simulation of the forming of textured aluminum sheets. Mater. Sci. Eng. A 256 (1998) 51
30. Kim K.J., Kim D., Choi S.H., Chung K., Shin K.S., Barlat F., Oh K.H., and Youn J.R. Formability of AA5182/polypropylene/AA5182 sandwich sheet. J. Mater. Process. Technol. 139 (2003) 1-7
31. Kim, D., Chung, K., Barlat, F., Youn, J.R., Kang, T.J., 2003b, Non-quadratic plane-stress anisotropic strain-rate potential. In: Proceedings of the International Symposium on Microstructures and Mechanical Properties of New Engineering Materials (IMMM 2003), Wuhan, China, October 6th 2003, pp. 46-51.
32. Lee S.Y., Keum Y.T., Chung K., Park J.M., and Barlat F. Three-dimensional finite-element method simulations of stamping processes for planar anisotropic sheet metals. Int. J. Mech. Sci. 39 10 (1997) 1181-1198
33. Lee M.-G., Kim D., Kim C., Wenner M.L., Wagoner R.H., and Chung K. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part II: Characterization of material properties. Int. J. Plasticity 21 (2005) 883-914
34. Lee M.-G., Kim D., Kim C., Wenner M.L., Wagoner R.H., and Chung K. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part III: Application. Int. J. Plasticity 21 (2005) 915-953
35. Li S., Hoferlin E., and Van Bael A. Application of a texture-based plastic potential in earing prediction of an IF steel. Adv. Eng. Mater. 3 (2001) 990-994
36. Rockafellar R.T. Convex Analysis (1970), Princeton University Press, Princeton, NY
37. Ryou H., Chung K., Yoon J.W., Han C.-S., Youn J.R., and Kang T.J. Incorporation of sheet-forming effects in crash simulations using ideal forming theory and hybrid membrane and shell method. J. Manuf. Sci. Eng., ASME 127 (2005) 182-192
38. Szabó L., and Jonas J.J. Consistent tangent operator for plasticity models based on the plastic strain rate potential. Comput. Methods Appl. Mech. Eng. 128 (1995) 315
39. Van Bael, A., Van Houtte, P., 2002. Convex fourth and sixth-order plastic potentials derived form crystallographic texture. In: Cescotto, S. (Ed.), Proceedings of the 6th European Mechanics of Materials Conference (EMMC6), University of Liege, Liege, Belgium, pp. 51-58.
40. Van Houtte P. Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials. Int. J. Plasticity 10 (1994) 719-748
41. Van Houtte P., and Van Bael A. Convex plastic potentials of fourth and sixth rank for anisotropic materials. Int. J. Plasticity 20 (2004) 1505-1524
42. Yoon J.W., Song I.S., Yang D.Y., Chung K., and Barlat F. Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system. Int. J. Mech. Sci. 37 (1995) 733-752
43. Yoon J.W., Barlat F., Chung K., Pourboghrat F., and Yang D.Y. Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum alloys. J. Mater. Process. Technol. (1998) 433-437
44. Yoon, J.W., Chung, K., Barlat, F., Allison, B.T., Richmond, O., 1999, Aluminum sheet forming design based on the non-quadratic strain rate potential SRP98. In: Proceedings of NUMISHEET'99, Besancon, France, September 1999, pp. 103-108.
45. Yoon J.W., Yang D.Y., and Chung K. Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials. Comput. Methods Appl. Mech. Eng. 174 (1999) 23-56
46. Yoon J.W., Yang D.Y., and Chung K. A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming. Int. J. Plasticity 15 (1999) 35-68
47. Yoon J.W., Barlat F., Chung K., Pourboghrat F., and Yang D.Y. Earing predictions based on asymmetric nonquadratic yield function. Int. J. Plasticity 16 (2000) 1075-1104
48. Yoon, J.W., Barlat, F., Dick, R.E., 2000b. Sheet metal forming simulation for aluminum alloy sheets. In: Sheet Metal Forming Simulation: Sing-Tang 65th Anniversary Volume, SAE paper 2000-01-0774, SAE, pp. 67-72.
49. Yoon, J.W., Chung, K., Pourboghrat, F., Shah, K.N., Chu, E.W., 2002. Preform design for hydroforming processes based on ideal forming design theory. In: Proceedings of NUMISHEET'02, Jeju Island, Korea, October 2002, pp. 385-390.
50. Yoon J.W., Barlat F., Dick R.E., Chung K., and Kang T.J. Plane stress yield function for aluminum alloy sheets, Part II: FE formulation and its implementation. Int. J. Plasticity 20 (2004) 495-522
51. Yoon J.W., Barlat F., Dick R.E., and Karabin M.E. Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int. J. Plasticity 22 (2006) 174-193
52. Zhou D., and Wagoner R.H. A numerical method for introducing an arbitrary yield function into rigid-viscoplastic FEM programs. Int. J. Numer. Methods Eng. 37 (1994) 3467-3486
53. Zhou Y., Jonas J.J., Savoie J., Makinde A., and MacEwen S.R. Effect of texture on earing in FCC metals: Finite element simulations, Int. J. Plasticity 14 (1998) 117
54. Ziegler H. An Introduction to Thermodynamics (1977), North Holland Publishing Company, Amsterdam