Analysis of pellet degradation of extruded high energy fish feeds with different physical qualities in a pneumatic feeding system

Aquacultural Engineering

Volumn 44, Issue 1, 2011, Pages 25-34

  Aas, Turid Synnøve ^a,b   Oehme, Maike ^a,b,c   Sørensen, Mette ^a,c   He, Gaojie ^c   Lygren, Ingolf ^d   Åsgård, Torbjørn ^a,b  

^a NOFIMA   (Norway)

^b SINTEF   (Norway)

^c NORWEGIAN UNIVERSITY OF LIFE SCIENCES   (Norway)

^d AKVA Group ASA   (Norway)

Author keywords

Feed loss; Pellet breakage; Pellet durability; Pellet hardness; Physical feed quality; Pneumatic feeding system

Indexed keywords

FEED LOSS; FEED QUALITY; PELLET BREAKAGE; PELLET DURABILITY; PELLET HARDNESS; PNEUMATIC FEEDING SYSTEM; DEGRADATION PATTERNS; GOOD CORRELATIONS; PHYSICAL QUALITY; PNEUMATIC CONVEYING; PNEUMATIC FEEDING SYSTEMS;

DEGRADATION; DURABILITY; FEEDING; FRACTURE; HARDNESS; HIGH ENERGY PHYSICS; MATERIALS HANDLING EQUIPMENT; PARTICLE SIZE; PELLETIZING; PNEUMATIC CONVEYORS; PNEUMATIC EQUIPMENT; PNEUMATICS;

ORE PELLETS; PARTICLE SIZE;

CORRELATION; DEGRADATION; DURABILITY; HARDNESS; SALMONID;

SALMONIDAE;

EID: 78650718360     PISSN: 01448609     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.aquaeng.2010.11.002     Document Type: Article

References (31)

1. Aarseth K.A. Attrition of feed pellets during pneumatic conveying: the influence of velocity and bend radius. Biosyst. Eng. 2004, 89:197-213.
2. Aarseth K.A., Perez V., Boe J.K., Jeksrud W.K. Reliable pneumatic conveying of fish feed. Aquacult. Eng. 2006, 35:14-25.
3. Aarseth K.A., Sørensen M., Storebakken T. Red yeast Xanthophyllomyces dendrorhus inclusion in diets for salmonids improves pellet strength. Anim. Feed Sci. Technol. 2006, 126:75-81.
4. Askeland T., Fjellanger K., Flem N. The story of DORIS-improved control of the feed's physical quality. Trouw Outlook 2002, 18:23-25.
5. Baeverfjord G., Refstie S., Krogedal P., Åsgard T. Low feed pellet water stability and fluctuating water salinity cause separation and accumulation of dietary oil in the stomach of rainbow trout (Oncorhynchus mykiss). Aquaculture 2006, 261:1335-1345.
6. Fiskeridirektoratet Nøkkeltall for havsbruknæringen. År 2009 2010.
7. Fokeer S., Kingman S., Lowndes I., Reynolds A. Characterisation of the cross sectional particle concentration distribution in horizontal dilute flow conveying-a review. Chem. Eng. Process. 2004, 43:677-691.
8. Glencross B., Hawkins W., Maas R., Karopoulos M., Hauler R. Evaluation of the influence of different species and cultivars of lupin kernel meal on the extrusion process, pellet properties and viscosity parameters of salmonid feeds. Aquacult. Nutr. 2009, 16:13-24.
9. Hilton J.W., Cho C.Y., Slinger S.J. Effect of extrusion processing and steam pelleting diets on pellet durability, pellet water absorption, and physiological response of rainbow trout (Salmo gairdneri R.). Aquaculture 1981, 5:185-194.
10. Kaliyan N., Morey R.V. Factors affecting strength and durability of densified biomass products. Biomass Bioenergy 2009, 33:337-359.
11. Kalman H. Attrition control by pneumatic conveying. Powder Technol. 1999, 104:214-220.
12. Kalman H., Goder D. Design criteria for particle attrition. Adv. Powder Technol. 1998, 9:153-167.
13. Kalman H., Satran A., Meir D., Rabinovich E. Pickup (critical) velocity of particles. Powder Technol. 2005, 160:103-113.
14. Liu H. Pipeline Engineering 2003, Lewis Publishers, CRC Press LLC, Boca Raton, FL, 420 pp.
15. Mina-Boac J., Maghirang R.G., Casada M.E. Durability and breakage of feed pellets during repeated elevator handling. ASABE Annual International Meeting, Portland Convention Center Portland 2006.
16. Norambuena, F., 2005. Aquaculture's feeding system: optimization of pick up velocity based on feeding rate and pipeline length. Master thesis, Department of Mathematical Science and Technology, UMB, Ås.
17. Øverland M., Sørensen M., Storebakken T., Penn M., Krogdahl Å., Skrede A. Pea protein concentrate substituting fish meal or soybean meal in diets for Atlantic salmon (Salmo salar)-effect on growth performance, nutrient digestibility, carcass composition, gut health, and physical feed quality. Aquaculture 2009, 288:305-311.
18. Pahk J.B., Klinzing G.E. Comparison of flow characteristics for dilute phase pneumatic conveying for two different plastic pellets. J. Chin. Inst. Chem. Eng. 2008, 39:143-150.
19. Pitchumani R., Meesters G.M.H., Scarlett B. Breakage behaviour of enzyme granules in a repeated impact test. Powder Technol. 2003, 130:421-427.
20. Refstie S., Glencross B., Landsverk T., Sørensen M., Lilleeng E., Hawkins W., Krogdahl Å. Digestive function and intestinal integrity in Atlantic salmon (Salmo salar) fed kernel meals and protein concentrates made from yellow or narrow-leafed lupins. Aquaculture 2006, 261:1382-1395.
21. Salman A.D., Hounslow M.J., Verba A. Particle fragmentation in dilute phase pneumatic conveying. Powder Technol. 2002, 126:109-115.
22. Sommerfeld M., Kussin J. Wall roughness effects on pneumatic conveying of spherical particles in a narrow horizontal channel. Powder Technol. 2004, 142:180-192.
23. Sørensen M., Stjepanovic N., Romarheim O.H., Krekling T., Storebakken T. Soybean meal improves the physical quality of extruded fish feed. Anim. Feed Sci. Technol. 2009, 149:149-161.
24. Sørensen, M., Morken, T., Kosanovic, M., Øverland, M., in press. Pea and wheat starch possess different processing characteristics and affect physical quality and viscosity of extruded feed for Atlantic salmon. Aquacult. Nutr., doi:10.1111/j.1365-2095.2010.00767.x.
25. Sørensen M., Nguyen G., Storebakken T., Øverland M. Starch source, screw configuration and injection of steam into the barrel affect physical quality of extruded fish feed. Aquacult. Res. 2010, 41:419-432.
26. Tavares L.M., King R.P. Modelling of particle fracture by repeated impacts using continuum damage mechanics. Powder Technol. 2002, 123:138-146.
27. Taylor T. Specific energy consumption and particle attrition in pneumatic conveying. Powder Technol. 1998, 95:1-6.
28. Thomas M., van der Poel A.F.B. Physical quality of pelleted animal feed 1. Criteria for pellet quality. Anim. Feed Sci. Technol. 1996, 61:89-112.
29. Vásquez N., Jacob K., Cocco R., Dhodapkar S., Klinzing G.E. Visual analysis of particle bouncing and its effect on pressure drop in dilute phase pneumatic conveying. Powder Technol. 2008, 179:170-175.
30. Venou B., Alexis M.N., Fountoulaki E., Haralabous J. Performance factors, body composition and digestion characteristics of gilthead sea bream (Sparus aureta) fed pelleted or extruded diets. Aquacult. Nutr. 2009, 15:390-401.
31. Zimonja O., Hetland H., Lazarevic H., Edvardsen D.H., Svihus B. Effects of fibre content in pelleted wheat and oat diets on technical pellet quality and nutritional value for broiler chickens. Can. J. Anim. Sci. 2008, 88:613-622.