Laser-assisted machining of a fiber reinforced metal matrix composite

Journal of Manufacturing Science and Engineering

Volumn 132, Issue 6, 2010, Pages

  Dandekar, Chinmaya R ^a   Shin, Yung C ^a  

^a Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ABAQUS; ALUMINA; ALUMINUM OXIDE; CORROSION RESISTANCE; CORROSION RESISTANT ALLOYS; CUTTING; DIAMOND CUTTING TOOLS; FIBER REINFORCED METALS; HIGH STRENGTH ALLOYS; LASER MATERIALS PROCESSING; MACHINING; PARTICLE REINFORCED COMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; SURFACE ROUGHNESS; VOLUME FRACTION; WEAR OF MATERIALS;

ALUMINUM MATRIX COMPOSITES; CONVENTIONAL MACHINING; CUTTING PARAMETERS; HIGH SPECIFIC STRENGTH; HIGH VOLUME FRACTION; LASER ASSISTED MACHINING; MATERIAL REMOVAL RATE; SPECIFIC CUTTING ENERGY;

METALLIC MATRIX COMPOSITES;

EID: 78650502746     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4002548     Document Type: Article

References (41)

1. Pramanik, A., Zhang, L. C, and Arsecularatne, J. A., 2006, "Prediction of Cutting Forces in Machining of Metal Matrix Composites," Int. J. Mach. Tools Manuf., 46, pp. 1795-1803.
2. Kishawy, H. A., Kannan, S., and Balzainski, M., 2004, "An Energy Based Analytical Force Model for Orthogonal Cutting of Metal Matrix Composites," CIRPAnn., 53(1), pp. 91-94.
3. El-Gallab, M., and Sklad, M., 1998, "Machining of Al/SiC Particulate Metal Matrix Composites-Part I: Tool Performance," J. Mater. Process. Technol., 83, pp. 277-285. (Pubitemid 128408312)
4. Lin, J. T., Bhattacharyya, D., and Ferguson, W. G., 1998, "Chip Formation in the Machining of SiC Particle Reinforced Aluminum Matrix Composites," Compos. Sci. Technol., 58, pp. 285-291.
5. Kannan, S., Kishawy, H. A., and Balazinski, M., 2006, "Flank Wear Progression During Machining Metal Matrix Composites," ASME J. Manuf. Sci. Eng., 128, pp. 787-791.
6. Ramesh, M. V., Chan, K. C, Lee, W. B., and Cheung, C. F, 2001, "Finite-Element Analysis of Diamond Turning of Aluminum Matrix Composites," Compos. Sci. Technol., 61, pp. 1449-1456.
7. Monaghan, J., and Brazil, D., 1998, "Modeling the Flow Processes of a Particle Reinforced Metal Matrix Composite During Machining," Composites, Part A, 29(1-2), pp. 87-99.
8. Pramanik, A., Zhang, L. C, and Arsecularatne, J. A., 2007, "An FEM Investigation Into the Behavior of Metal Matrix Composites: Tool-Particle Interaction During Orthogonal Cutting," Int. J. Mach. Tools Manuf., 47, pp. 1497-1506.
9. Zhu, Y., and Kishawy, H. A., 2005, "Influence of Alumina Particles on the Mechanics of Machining Metal Matrix Composite During Machining," Int. J. Mach. Tools Manuf., 45, pp. 389-398.
10. Varadarajan, Y. S., Vijayaraghavan, L., and Krishnamurthy, R., 2002, "The Machinability Characteristics of Aluminosilicate Fiber Reinforced Al Alloy Composite," Mater. Manuf. Processes, 17(6), pp. 811-824.
11. Lei, S., Shin, Y., and Incropera, F, 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser-Assisted Machining of Silicon Nitride Ceramics," ASME J. Manuf. Sci. Eng., 123, pp. 639-646.
12. Rebro, P., Shin, Y C, and Incropera, F P., 2002, "Laser-Assisted Machining of Reaction Sintered Mullite Ceramics," ASME J. Manuf. Sci. Eng., 124, pp. 875-885. (Pubitemid 35384306)
13. Pfefferkorn, F E., Shin, Y C, Tian, Y, and Incropera, F P., 2004, "Laser-Assisted Machining of Magnesia-Partially Stabilized Zirconia," ASME J. Manuf. Sci. Eng., 126, pp. 42-51.
14. Klocke, F, and Bergs, T., 1997, "Laser-Assisted Turning of Advanced Ceramics," Proc. SPIE, 3102, pp. 120-130.
15. Anderson, M., Patwa, P., and Shin, Y C, 2006, "Laser-Assisted Machining of Inconel 718 With an Economic Analysis," Int. J. Mach. Tools Manuf., 46(14), pp. 1879-1891.
16. Anderson, M. C, and Shin, Y C, 2006, "Laser-Assisted Machining of an Austenitic Stainless Steel: P550," Proc. Inst. Mech. Eng., Part B, 220(B12), pp. 2055-2067.
17. Skvarenina, S., and Shin, Y C, 2006, "Laser-Assisted Machining of Compacted Graphite Iron," Int. J. Mach. Tools Manuf., 46, pp. 7-17.
18. 3 Particle Reinforced Aluminum Matrix Composite," J. Mater. Process. Technol., 129, pp. 268-272.
19. 3 Particle-Reinforced Al-Matrix Composite," Advances in Manufacturing Technology XVI, Proceedings of the 18th National Conference on Manufacturing Research, Leeds, UK, pp. 435-440.
20. Barnes, S., Pashby, I. R., and Mok, D. K., 1996, "The Effect of Workpiece Temperature on the Machinability of an Aluminum/SiC MMC," ASME J. Manuf. Sci. Eng., 118, pp. 422-427.
21. Rozzi, J., Pfefferkorn, F, Shin, Y, and Incropera, F, 2000, "Transient Three Dimensional Heat Transfer Model for the Laser-Assisted Machining of Silicon Nitride: I. Comparison of Predictions With Measured Surface Temperature Histories," Int. J. Heat Mass Transfer, 43, pp. 1409-1424.
22. Rozzi, J., Pfefferkorn, F, Shin, Y, and Incropera, F, 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source, Part I: Comparison of Surface Temperature Measurements With Theoretical Results," ASME J. Heat Transfer, 120(4), pp. 899-906. (Pubitemid 29081894)
23. Johnson, G. R., and Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures," Proceedings of the Seventh International Symposium on Ballistics, The Netherlands, pp. 541-547.
24. ASM International, 2005, ASM Alloy Center, Material Property Online Database.
25. Taylor, R. E., Groot, H., Goerz, T., Ferrier, J., and Taylor, D. L., 1998, "Ther-mophysical Properties of Molten Aluminum Alloys," High Temp. - High Press., 30, pp. 269-275. (Pubitemid 128363320)
26. Wierzbicki, T., Bao, Y, Lee, Y.-W., and Bai, Y, 2005, "Calibration and Evaluation of Seven Fracture Models," Int. J. Mech. Sci., 47, pp. 719-743.
27. Subbiah, S., and Melkote, S. N., 2007, "Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting," ASME J. Eng. Mater. Technol., 129, pp. 321-331.
28. Hibbitt, Karlesson, & Sorenson, Inc., 2004, ABAQUS User's Manual, Version 6.5, Pawtucket, RI.
29. 3M, 2004, Nextel Ceramic Textiles Technical Notebook, St. Paul, MN.
30. Cantonwine, P. E., 2003, "Strength of Thermally Exposed Alumina Fibers Part I Single Filament Behavior," J. Mater. Sci., 38, pp. 461-470.
31. Hayashi, K., Fujino, Y, and Nishikawa, T., 1983, "Thermal Conductivity of Alumina and Zirconia Fibrous Insulators at High Temperatures," Yogyo Kyo-kaishi, 91(10), pp. 449-456. (Pubitemid 14582677)
32. Pradère, C, Goyheneche, J. M., Batsale, J. C, Dilhaire, S., and Pailler, R., 2005, "Specific-Heat Measurement of Single Metallic, Carbon, and Ceramic Fibers at Very High Temperatures," Rev. Sci. Instrum., 76, p. 064901.
33. Tian, Y, and Shin, Y C, 2007, "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-Assisted Machining," ASME J. Manuf. Sci. Eng., 129(2), pp. 287-295.
34. Dandekar, C. R., and Shin, Y C, 2008, "Multiphase Finite Element Modeling of Machining Unidirectional Composites: Prediction of Debonding and Fiber Damage," ASME J. Manuf. Sci. Eng., 130, p. 051016.
35. Tvergaard, V, 1990, "Effect of Fiber Debonding in a Whisker-Reinforced Metal," Mater. Sci. Eng., A, 125, pp. 203-213.
36. Yamakov, V, Saether, E., Phillips, D. R., and Glaessgen, E. H., 2006, "Molecular-Dynamics Simulation-Based Cohesive Zone Representation of In-tergranular Fracture Processes in Aluminum," J. Mech. Phys. Solids, 54, pp. 1899-1928.
37. Iesulauro, E., Ingraffea, A. R., Arwade, S., and Wawrzynek, P. A., 2002, "Simulation of Grain Boundary Decohesion and Crack Initiation in Aluminum Microstructure Models," Fatigue and Fracture Mechanics, 33rd ed., W. G. Reuter and R. S. Piascik, eds., ASTM International, West Conshohocken, PA.
38. Zhang, W., Gu, M., Chen, J., Wu, Z., Zhang, F, and Deve, H. E., 2003, "Tensile and Fatigue Response of Alumina-Fiber Reinforced Aluminum Matrix Composite," Mater. Sci. Eng., A, 341, pp. 9-17.
39. Third Wave Systems Inc., 2008, ADVANTEDGE FEM 5.1 User's Manual, Minneapolis, MN.
40. Tian, Y, and Shin, Y C, 2006, "Thermal Modeling for Laser-assisted Machining of Silicon Nitride Ceramics With Complex Features," ASME J. Manuf. Sci. Eng., 128, pp. 425-434.
41. Shelton, J. A., and Shin, Y C, 2008, "An Experimental Evaluation of Laser-Assisted Micromilling of Two Difficult to Machine Alloys," ASME International Conference on Manufacturing Science and Engineering, Evanston, IL, Oct. 8-10.