Multiphase finite element modeling of machining unidirectional composites: Prediction of debonding and fiber damage

Journal of Manufacturing Science and Engineering

Volumn 130, Issue 5, 2008, Pages 0510161-05101612

  Dandekar, Chinmaya R ^a   Shin, Yung C ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ABAQUS; CUTTING; DEBONDING; FIBER REINFORCED PLASTICS; FORECASTING; GLASS FIBERS; REINFORCEMENT;

CARBON FIBER REINFORCED; FIBER ORIENTATION ANGLE; FIBER-MATRIX INTERFACES; FINITE ELEMENT PACKAGES; GLASS FIBER-REINFORCED EPOXY; ORTHOGONAL MACHINING; UNIDIRECTIONAL COMPOSITES; UNIDIRECTIONAL FIBERS;

FINITE ELEMENT METHOD;

BRITTLENESS; CARBON; CARBON FIBERS; COMPOSITES; DEFORMATION; GLASS FIBERS; MACHINING; POLYEPOXIDES; REINFORCED PLASTIC;

EID: 55149122724     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2976146     Document Type: Article

References (26)

1. Konig, W., Wulf, Ch., Graß, P., and Willerscheid, H., 1985, "Machining of Fiber Reinforced Plastics," CIRP Ann., 34(2), pp. 537-547.
2. Arola, D., and Ramulu, M., 1997, "Orthogonal Cutting of Fiber-Reinforced Composites: A Finite Element Analysis," Int. I. Mech. Sci., 39, pp. 597-613.
3. Arola, D., Sultan, M. B., and Ramulu, M., 2002, "Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics," ASME I. Manuf. Sci. Eng., 124(1), pp. 32-41.
4. Dandekar, C., Orady, E. A., and Mallick, P. K., 2007, "Drilling Characteristics of an E-Glass Fabric Reinforced Polypropylene Composite and an Aluminum Alloy: A Comparative Study," ASME J. Manuf. Sci. Eng., 129, pp. 1080-1087.
5. Nayak, D., Singh, I., Bhatnagar, N., and Mahajan, P., 2004, "An Analysis of Machining Induced Damages in FRP Composites: A Micromechanics Finite Element Approach," AIP Conf. Proc., 712, pp. 327-331.
6. Nayak, D., and Bhatnagar, N., 2005, "Machining Studies of UD-FRP Composites. Part II: Finite Element Analysis," Mach. Sei. Technol., 9, pp. 503528.
7. Rao, G. V. G., Mahajan, P., and Bhatnagar, N., 2007, "Micro- Mechanical Modeling of Machining of FRP Composites-Cutting Force Analysis," Compos. Sei. Technol., 67, pp. 579-593.
8. Rao, G. V. G., Mahajan, P., and Bhatnagar, N., 2007, "Machining of UDGFRP Compsites Chip Formation Mechanism," Compos. Sci. Technol., 67, pp. 2271-2281.
9. Hocheng, H., and Dharan, C. K. H., 1990, "Delamination During Drilling in Composite Laminates," ASME I. Eng. Ind., 112(3), pp. 236-239.
10. Nayak, D., and Bhatnagar, N., 2005, "Machining Studies of Uni-Directional Glass Fiber Plastic (UD-GFRP) Composites. Part I: Effect of Geometrical and Process Parameters," Mach. Sci. Technol., 9, pp. 481-501.
11. Lemaitre, J., and Desmorat, R., 2005, Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures, Springer-Verlag, Berlin.
12. Hibbit, Karlesson & Sorenson, Inc., 2004, ABAQUS User's Manual, Version 6.5, Pawtucket, RI.
13. Tian, Y., and Shin, Y. C., 2007, "Multiscale Finite Element Modeling of Silicon Nitride Ceramics undergoing Laser-Assisted Machining," ASME J. Manuf. Sci. Eng., 129(2), pp. 287-295.
14. Tvergaard, V., 1990, "Effect of Fiber Debonding in a Whisker-Reinforced Metal," Mater. Sci. Eng., A, 125, pp. 203-213.
15. Tvergaard, V., and Hutchinson, I. W., 1992, "The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids," J. Mech. Phys. Solids, 40, pp. 1377-1397.
16. Hutchinson, J. W., and Evans, A. G., 2000, "Mechanics of Materials: Top-Down Approaches to Fracture," Acta Mater., 48, pp. 125-135.
17. Wang, Y., and Xia, Y, 2000, "Dynamic Tensile Properties of E-Glass, Kevlar 49 and Polyvinyl Alcohol Fiber Bundles," J. Mater. Sci. Lett., 19, pp. 583586.
18. Zhou, Y., Wang, Y., Jellani, S., and Xia, Y., 2007, "Experimental Study on Tensile Behavior of Carbon Fiber and Carbon Fiber Reinforced Aluminum at Different Strain Rate," Appl. Compos. Mater., 14, pp. 17-31.
19. Pickering, K. L., Bader, M. G., and Kimber, A. C., 1998, "Damage Accumulation During the Failure of Uniaxial Carbon Fiber Composites," Composites, Part A, 29A, pp. 435-441.
20. Ramesh, M. V., Seelharamu, K. N., Ganesan, N., and Sivakumar, M. S., 1998, "Analysis of Machining of FRPs Using FEM," Int. J. Mach. Tools Manuf., 38, pp. 1531-1549.
21. Wern, C. W., and Ramulu, M., 1995, "Machining Mechanics in Fiber Reinforced Plastics," AMD (Am. Soc. Mech. Eng.), 208, pp. 1-28.
22. Sakuma, K., and Seto, M., 1983, "Tool Wear in Cutting Glass-Fiber Reinforced Plastics: The Relation Between Fiber Orientation and Tool Wear," Bull. JSME. 26(218), pp. 1420-1427.
23. Kaneeda, T., 1991, "CFRP Cutting Mechanism: Effect of Tool Edge Roundedness and Relief Angle on Cutting Phenomenon," Int. J. Jpn. Soc. Precis. Eng., 57(3), pp. 491-496.
24. Movahhedy. M. R. Altintas, Y., and Gadala, M. S.. 2002, "Numerical Analysis of Metal Cutting With Chamfered and Blunt Tools," ASME 1. Manuf. Sei. Eng., 124, pp. 178-188.
25. Olovsson, L., Nilsson, L., and Simonsson, K.. 1999, "ALE Formulation for the Solution of Two-Dimensional Metal Cutting Problems," Comput. Struct., 72, pp. 497-507.
26. Wang, D, H., Ramulu, M., and Arola, D., 1995, "Orthogonal Cutting Mechanisms of Graphite Epoxy Composite. Part I: Unidirectional Laminate," Int. J. Mach. Tools Manuf., 35(12), pp. 1623-1638.