Inverse computation of cohesive fracture properties from displacement fields

Inverse Problems in Science and Engineering

Volumn 18, Issue 8, 2010, Pages 1103-1128

  Shen, Bin ^a   Stanciulescu, Ilinca ^b   Paulino, Glaucio H ^a  

^a United States of America   (United States)

^b Rice University   (United States)

Author keywords

Cohesive zone model; Digital image correlation; Inverse problem; Nelder mead method; Optimization

Indexed keywords

ACCURATE MEASUREMENT; ARBITRARY NUMBER; BOUNDARY STRESS; COHESIVE FRACTURE; COHESIVE STRESS; COHESIVE ZONE MODEL; CONSTITUTIVE RELATIONSHIPS; CONTROL POINT; CRACK SURFACE TRACTION; CRACK SURFACES; CUBIC SPLINE; DERIVATIVE-FREE; DIGITAL IMAGE CORRELATIONS; DISPLACEMENT FIELD; EXPERIMENTAL ERRORS; EXPERIMENTAL MECHANICS; FE METHOD; FINITE ELEMENT ANALYSIS; FINITE ELEMENT SIMULATIONS; GLOBAL MEASUREMENTS; GOVERNING PARAMETERS; INVERSE COMPUTATION; KEY TECHNIQUES; LOADING LEVEL; M METHOD; NELDER-MEAD METHODS; NUMERICAL TESTS; OPTIMIZATION METHOD; QUASIBRITTLE MATERIAL; SURFACE DISPLACEMENT;

BRITTLE FRACTURE; BRITTLENESS; COMPUTER SIMULATION; CRACKS; IMAGE ANALYSIS; INVERSE PROBLEMS; OPTIMIZATION; STRAIN MEASUREMENT; SURFACES;

FINITE ELEMENT METHOD;

EID: 78650248601     PISSN: 17415977     EISSN: 17415985     Source Type: Journal    
DOI: 10.1080/17415977.2010.512661     Document Type: Article

References (51)

1. G.I. Barenblatt, The formation of equilibrium cracks during brittle fracture: General ideas and hypotheses. Axially-symmetric cracks, J. Appl. Math. Mech. 23 (1959), pp. 622-636.
2. D.S. Dugdale, Yielding of steel sheets containing slits, J. Mech. Phys. Solids 8 (1960), pp. 100-104.
3. A. Hillerborg, M. Modéer, and P.E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem. Concr. Res. 6 (1976), pp. 773-781.
4. X.P. Xu and A. Needleman, Numerical simulations of fast crack growth in brittle solids, J. Mech. Phys. Solids 42 (1994), pp. 1397-1434.
5. Z. Zhang and G.H. Paulino, Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials, Int. J. Plast. 21 (2005), pp. 1195-1254.
6. G.T. Camacho and M. Ortiz, Computational modeling of impact damage in brittle materials, Int. J. Solids Struct. 33 (1996), pp. 2899-2938.
7. M. Ortiz and A. Pandolfi, Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, Int. J. Numer. Methods Eng. 44 (1999), pp. 1267-1282.
8. Z. Zhang and G.H. Paulino, Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements, Int. J. Solids Struct. 44 (2007), pp. 3601-3626.
9. N. Moes and T. Belytschko, Extended finite element method for cohesive crack growth, Eng. Fract. Mech. 69 (2002), pp. 813-833.
10. G.N. Wells and L.J. Sluys, A new method for modeling cohesive cracks using finite elements, Int. J. Numer. Methods Eng. 50 (2001), pp. 2667-2682.
11. P. Rahulkumar, Cohesive element modeling of viscoelastic fracture: Application to peel testing of polymers, Int. J. Solids Struct. 37 (2000), pp. 1873-1897.
12. Z. Zhang, G.H. Paulino, and W. Celes, Extrinsic cohesive modeling of dynamic fracture and microbranching instability in brittle materials, Int. J. Numer. Methods Eng. 72 (2007), pp. 893-923.
13. J. Roesler, G.H. Paulino, K. Park, and C. Gaedicke, Concrete fracture prediction using bilinear softening, Cem. Concr. Compos. 29 (2007), pp. 300-312.
14. D.-J. Shim, G.H. Paulino, and R.H. Dodds Jr, J resistance behavior in functionally graded materials using cohesive zone and modified boundary layer models, Int. J. Fract. 139 (2006), pp. 91-117.
15. S.H. Song, G.H. Paulino, and W.G. Buttlar, Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model, ASCE J. Eng. Mech. 132 (2006), pp. 1215-1223.
16. S.H. Song, G.H. Paulino, and W.G. Buttlar, Influence of the cohesive zone model shape parameter on asphalt concrete fracture behavior, in Multiscale and Functionally Graded Materials, AIP Conference Proceedings 973, G.H. Paulino, M.-J. Pindera, R.H. Dodds Jr, F.A. Rochinha, E.V. Dave, and L. Chen, eds., 2008, pp. 730-735.
17. J.G.M. van Mier and M.R.A. van Vliet, Uniaxial tension test for the determination of fracture parameters of concrete: State of the art, Fract. Concrete Rock 69 (2002), pp. 235-247.
18. J. Yang and G. Fischer, Simulation of the tensile stress-strain behavior of strain hardening cementitious composites, in Measuring, Monitoring and Modeling Concrete Properties, M.S. Konsta-Gdoutos, ed., Dordrecht, Springer, 2006, pp. 25-31.
19. S.P. Shah, C. Ouyang, and S.E. Swartz, Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and other Quasi-brittle Materials, Wiley, New York, 1995.
20. K.Y. Volokh, Comparison between cohesive zone models, Commun. Numer. Methods Eng. 20 (2004), pp. 845-856.
21. G. Bolzon, R. Fedele, and G. Maier, Parameter identification of a cohesive crack model by Kalman filter, Comput. Methods Appl. Mech. Eng. 191 (2002), pp. 2847-2871.
22. G. Maier, M. Bocciarelli, G. Bolzon, and R. Fedele, Inverse analyses in fracture mechanics, Int. J. Fract. 138 (2006), pp. 47-73.
23. N.S. Que and F. Tin-Loi, Numerical evaluation of cohesive fracture parameters from a wedge splitting test, Eng. Fract. Mech. 69 (2002), pp. 1269-1286.
24. N.S. Que and F. Tin-Loi, An optimization approach for indirect identification of cohesive crack properties, Comput. Struct. 80 (2002), pp. 1383-1392.
25. F. Tin-Loi and N.S. Que, Nonlinear programming approaches for an inverse problem in quasibrittle fracture, Int. J. Mech. Sci. 44 (2002), pp. 843-858.
26. J.G.M. van Mier, Fracture Processes of Concrete: Assessment of Material Parameters for Fracture Models, CRC Press, Boca Raton, 1997.
27. M. Elices, The cohesive zone model: Advantages, limitations and challenges, Eng. Fract. Mech. 69 (2002), pp. 137-163.
28. S. Seong Hyeok, G.H. Paulino, and W.G. Buttlar, A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material, Eng. Fract. Mech. 73 (2006), pp. 2829-2848.
29. S.H. Song, G.H. Paulino, and W.G. Buttlar, Cohesive zone simulation of mode I and mixed-mode crack propagation in asphalt concrete, Geo-Frontiers 2005, ASCE, Reston, VA, Austin, TX, USA, 2005, pp. 189-198.
30. J.W. Dally and W.F. Riley, Experimental Stress Analysis, College House Enterprises, Knoxville, Tenn, 2005.
31. M. Bonnet and A. Constantinescu, Inverse problems in elasticity, Inverse Prob. 21 (2005), pp. 1-50.
32. S. Avril, M. Bonnet, A.-S. Bretelle, M. Grediac, F. Hild, P. Ienny, F. Latourte, D. Lemosse, S. Pagano, E. Pagnacco, and F. Pierron, Overview of identification methods of mechanical parameters based on full-field measurements, Exp. Mech. 48 (2008), pp. 381-402.
33. J. Abanto-Bueno and J. Lambros, Investigation of crack growth in functionally graded materials using digital image correlation, Eng. Fract. Mech. 69 (2002), pp. 1695-1711.
34. J. Abanto-Bueno and J. Lambros, Experimental determination of cohesive failure properties of a photodegradable copolymer, Exp. Mech. 45 (2005), pp. 144-152.
35. H. Tan, C. Liu, Y. Huang, and P.H. Geubelle, The cohesive law for the particle/matrix interfaces in high explosives, J. Mech. Phys. Solids 53 (2005), pp. 1892-1917.
36. G. Geymonat and S. Pagano, Identification of mechanical properties by displacement field measurement: A variational approach, Meccanica 38 (2003), pp. 535-545.
37. S. Roux and F. Hild, Digital image mechanical identification (DIMI), Exp. Mech. 48 (2008), pp. 495-508.
38. K. Genovese, L. Lamberti, and C. Pappalettere, Improved global-local simulated annealing formulation for solving non-smooth engineering optimization problems, Int. J. Solids Struct. 42 (2005), pp. 203-237.
39. J. Molimard, R. Le Riche, A. Vautrin, and J.R. Lee, Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test, Exp. Mech. 45 (2005), pp. 404-411.
40. M. Grediac, F. Pierron, S. Avril, and E. Toussaint, The virtual fields method for extracting constitutive parameters from full-field measurements: A review, Strain 42 (2006), pp. 233-253.
41. S. Avril and F. Pierron, General framework for the identification of constitutive parameters from full-field measurements in linear elasticity, Int. J. Solids Struct. 44 (2007), pp. 4978-5002.
42. S.H. Song, G.H. Paulino, and W.G. Buttlar, Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model, J. Eng. Mech. 132 (2006), pp. 1215-1223.
43. L. Dick-Nielsen, H. Stang, and P.N. Poulsen, Condition for strain-hardening in ECC uniaxial test specimen, in Measuring, Monitoring and Modeling Concrete Properties, M.S. Konsta-Gdoutos, ed., Dordrecht, Springer, 2006, pp. 41-47.
44. C. De Boor, A Practical Guide to Splines, Springer, New York, 2001.
45. P. Deuflhard and A. Hohmann, Numerical Analysis in Modern Scientific Computing: An Introduction, Springer, New York, 2003.
46. R. Fletcher, Practical Methods of Optimization, Wiley, Chichester; New York, 1987.
47. J.A. Nelder and R. Mead, Simplex method for function minimization, Comput. J. 7 (1965), pp. 308-313.
48. J. Nocedal and S.J. Wright, Numerical Optimization, Springer, New York, 2006.
49. L.M. Bezerra and S. Saigal, A boundary element formulation for the inverse elastostatics problem (IESP) of flaw detection, Int. J. Numer. Methods Eng. 36 (1993), pp. 2189-2202.
50. H. Lu and P.D. Cary, Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient, Exp. Mech. 40 (2000), pp. 393-400.
51. P. Cheng, M.A. Sutton, H.W. Schreier, and S.R. McNeill, Full-field speckle pattern image correlation with B-spline deformation function, Exp. Mech. 42 (2002), pp. 344-352.