Inverse analyses in fracture mechanics

International Journal of Fracture

Volumn 138, Issue 1-4, 2006, Pages 47-73

  Maier, Giulio ^a   Bocciarelli, M ^a   Bolzon, G ^a   Fedele, R ^a  

^a POLITECNICO DI MILANO   (Italy)

Author keywords

In situ experiments; Interface models; Inverse analysis; Non destructive testing; Parameter identification

Indexed keywords

COMPUTER SIMULATION; INVERSE PROBLEMS; KALMAN FILTERING; MATHEMATICAL MODELS; NONDESTRUCTIVE EXAMINATION; OPTIMIZATION; PARAMETER ESTIMATION;

ENGINEERING-ORIENTED RESEARCH; FARCTURE CONSTITUTIVE MODELS; THREE-POINT-BENDING TESTS; WEDGE-SPLITTING TESTS;

FRACTURE MECHANICS;

EID: 33745267245     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-006-7153-7     Document Type: Conference Paper

References (84)

1. ABAQUS/Standard (1998). Theory and User's Manuals. Release 6.2-1, Pawtucket, RI (USA).
2. A. Abdul-Baqi E. Giessen Van der 2001 Indentation-induced interface delamination of a strong film on a ductile substrate Thin Solid Films 381 143-154 10.1016/S0040-6090(00)01344-4
3. A. Abdul-Baqi E. Giessen Van der 2002 Numerical analysis of indentation-induced cracking of brittle coatings on ductile substrates International Journal of Solids and Structures 39 1427-1442 10.1016/ S0020-7683(01)00280-3
4. A.M. Alvaredo R.J. Torrent 1987 The effect of the shape of the strain-softening diagram on the bearing capacity of concrete beams Materials and Structures 20 448-454
5. R. Ardito L. Bartolotta L. Ceriani G. Maier 2004 Diagnostic inverse analysis of concrete dams with static excitation Journal of the Mechanical Behavior of Materials 15 6 381-389
6. G.I. Barenblatt 1962 The mathematical theory of equilibrium cracks in brittle fracture Advances in Applied Mechanics 7 55-129 149728
7. Z.P. Bažant J. Planas 1998 Fracture and Size Effect in Concrete and Other Quasi-brittle Materials CRC Press Boca Raton, FL (USA)
8. A.K. Bhattacharya W.D. Nix 1998 Finite element simulation of indentation experiments International Journal of Solids and Structures 24 881-891 10.1016/0020-7683(88)90039-X
9. Bittanti, S., Maier, G. and Nappi, A. (1984). Inverse problems in structural elasto-plasticity: A Kalman filter approach. In: A. Sawczuck and G. Bianchi (eds.) Plasticity Today Elsevier Applied Science, London, pp. 311-329.
10. M. Bocciarelli G. Bolzon G. Maier 2005 Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping Mechanics of Materials 37 855-868 10.1016/j.mechmat.2004.09.001
11. G. Bolzon G. Cocchetti 2003 Direct assessment of structural resistance against pressurized fracture International Journal for Numerical and Analytical Methods in Geomechanics 27 353-378 10.1002/nag.276 2003IJNAM..27..353B
12. Bolzon, G., Cocchetti, G., Maier, G., Novati, G. and Giuseppetti, G. (1994a). Boundary element and finite element fracture analysis of dams by the cohesive crack model: A comparative study. In: E. Bourdarot, J. Mazars and V. Sauma (eds.) Dam Fracture and Damage Balkema, Rotterdam, pp. 69-78.
13. G. Bolzon A. Corigliano 1997a A discrete formulation for elastic solids with damaging interfaces Computer Methods in Applied Mechanics and Engineering 140 329-359 10.1016/S0045-7825(96)01101-2
14. G. Bolzon R. Fedele G. Maier 2002 Identification of cohesive crack models by Kalman filter Computer Methods in Applied Mechanics and Engineering 191 2847-2871 10.1016/S0045-7825(02)00223-2
15. G. Bolzon D. Ghilotti G. Maier 1997b Parameter identification of the cohesive crack model H. Sol C.W.J. Oomens Material Identification Using Mixed Numerical Experimental Methods Kluwer Academic Publisher Dordrecht 213-222
16. G. Bolzon 1996 Hybrid finite element approach to quasi-brittle fracture Computer and Structures 60 733-741 0918.73212 10.1016/ 0045-7949(95)00444-0
17. Bolzon, G. and Maier, G. (1998). Identification of cohesive crack models for concrete by three-point bending tests, In: R. de Borst, N. Bicanic, H. Mang and G. Meschke (eds.) Computational Modelling of Concrete Structures Balkema Publishers, Rotterdam, pp. 301-310.
18. Bolzon, G., Maier, G. and Novati, G. (1994b). Some aspects of quasi-brittle fracture analysis as a linear complementarity problem, In: Z.P. Bažant, Z. Bittnar, M. Jirásek and J. Mazars (eds.) Fracture and Damage in Quasi-brittle Structures E and FN Spon, London, pp. 159-174.
19. G. Bolzon G. Maier M. Panico 2004 Material model calibration by indentation, imprint mapping and inverse analysis International Journal of Solids and Structures 41 2957-2975 10.1016/j.ijsolstr.2004.01.025
20. G. Bolzon G. Maier F. Tin-Loi 1995 Holonomic and non-holonomic simulations of quasi-brittle fracture:a comparative study of mathematical programming approaches F.H. Wittman Fracture Mechanics of Concrete Structures Aedificatio Publishers Freiburg 885-898
21. G. Bolzon G. Maier F. Tin-Loi 1997c On multiplicity of solutions in quasi-brittle fracture computations Computational Mechanics 19 511-516 10.1007/s004660050201 1997CompM..19..511B
22. E. Brühwiler F.H. Wittmann 1990 Wedge-splitting test, a new method of performing stable fracture mechanics tests Engineering Fracture Mechanics 35 117-125 10.1016/0013-7944(90)90189-N
23. H.D. Bui 1994 Inverse Problems in the Mechanics of Materials: An Introduction CRC Press Boca Raton, FL (USA)
24. G.T. Camacho M. Ortiz 1996 Computational modelling of impact damage in brittle materials International Journal of Solids and Structures 33 2899-2938 10.1016/0020-7683(95)00255-3
25. A. Carpinteri 1989 Softening and snap-back instability of cohesive solids International Journal for Numerical Methods in Engineering 29 1521-1538 10.1002/nme.1620280705
26. A. Carpinteri B. Chiaia S. Invernizzi 2001 Numerical analysis of indentation fracture in quasi-brittle materials. Engineering Fracture Mechanics 71 567-577
27. CEB-FIP Model Code 1990 (1993). Design Code, Thomas Telford Ltd., London.
28. Z. Cen G. Maier 1992 Bifurcations and instabilities in fracture of cohesive-softening structures: A boundary element analysis Fatigue and Fracture of Engineering Materials and Structures 15 911-928
29. H. Cetinel B. Uyulgan C. Tekmen I. Ozdemir E. Celik 2003 Wear properties of functionally gradient layers on stainless steel substrates for high temperature applications Surface and Coatings Engineering 174-175 1089-1094 10.1016/S0257-8972(03)00385-2
30. Y.T. Cheng C.M. Cheng 1999 Scaling relationships in conical indentation of elastic perfectly-plastic solids International Journal of Solids and Structures 36 1231-1243 10.1016/S0020-7683(97)00349-1
31. G. Cocchetti G. Maier 2003 Elastic-plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming International Journal of Solids and Structures 40 7219-7244 2042403 10.1016/S0020-7683(03)00363-9
32. G. Cocchetti G. Maier X. Shen 2002 Piecewise-linear models for interfaces and mixed mode cohesive cracks Computer Methods in Engineering and Science 3 279-298
33. T.F. Coleman Y. Li 1996 An interior trust region approach for nonlinear minimisation subject to bounds SIAM Journal on Optimization 6 418-445 1387333 10.1137/0806023
34. C. Comi G. Maier U. Perego 1992 Generalized variable finite element modeling and extremum theorems in stepwise holonomic elastoplasticity with internal variables Computer Methods in Applied Mechanics and Engineering 96 213-237 1162380 10.1016/0045-7825(92)90133-5
35. A. Corigliano S. Mariani 2004 Parameter identification in explicit structural dynamics: Performance of the extended Kalman filter Computer Methods in Applied Mechanics and Engineering 193 3807-3835 10.1016/ j.cma.2004.02.003
36. R.W. Cottle J.S. Pang R.E. Stone 1992 The Linear Complementarity Problem Academic Press Boston
37. E. Denariè V. Saouma A. Iocco D. Varelas 2001 Concrete fracture process zone characterization with fiber optics ASCE Journal of Engineering Mechanics 127 494-502 10.1061/(ASCE)0733-9399(2001)127:5(494)
38. S.P. Dirkse M.C. Ferris 1995 The PATH solver: A non-monotone stabilization scheme for mixed complementarity problems Optimization Methods and Software 5 123-156
39. M. Elices G.V. Guinea J. Planas 1992 Measurement of the fracture energy using three-point bend tests: Part 3 - Influence of cutting the P-δ tail Materials and Structures 25 327-334
40. Facchinei, F. and Pang, J.S. (2003). Finite-Dimensional Variational Inequalities and Complementarity Problems, Vol. II, Springer Series in Operations Research and Financial Engineering, Berlin.
41. R. Fedele G. Maier B. Miller 2005 Identification of elastic stiffness and local stresses in concrete dams by in situ tests and neural networks Structure and Infrastructure Engineering 1 3 165-180
42. Fiacco, A.V., McCormick and G.P. (1968). Nonlinear Programming: Sequential Unconstrained Minimization Techniques, Wiley, New York (reprinted by SIAM Publications, Philadelphia, 1990).
43. Frangi, A. and Maier, G. (2002). The symmetric Galerkin boundary element method in linear and nonlinear fracture mechanics, In: D. Beskos and G. Maier (eds.) Boundary Element Advances in Solid Mechanics CISM Lecture Notes, Vol. 440, Springer Verlag, Wien.
44. G. Gioda G. Maier 1980 Direct search solution of an inverse problem in elastoplasticity: Identification of cohesion, friction angle and in situ stress by pressure tunnel tests International Journal for Numerical Methods in Engineering 15 1823-1848 10.1002/nme.1620151207
45. R.E. Goodman 1980 Introduction to Rock Mechanics John Wiley and Sons New York
46. G.V. Guinea J. Planas M. Elices 1992 Measurement of the fracture energy using three-point bend tests: Part 1 - Influence of experimental procedures Materials and Structures 25 212-218
47. G.V. Guinea J. Planas M. Elices 1994 A general bilinear fit for the softening curve of concrete Materials and Structures 27 99-105
48. Haykin, S. (1999). Neural Networks. A Comprehensive Foundation, 2nd Edition, Prentice Hall, Upper Saddle River, NJ (USA).
49. A. Hillerborg 1991 Application of the fictitious crack model to different types of materials International Journal of Fracture 51 95-102
50. S. Jayaraman G.T. Hahn W.C. Oliver C.A. Rubin P.C. Bastias 1998 Determination of monotonic stress-strain curve of hard materials from ultra-low-load indentation tests International Journal of Solids and Structures 35 365-381 10.1016/S0020-7683(97)89371-7
51. M. Jirasek Z.P. Bažant 2001 Inelastic Analysis of Structures John Wiley and Sons New York
52. Karihaloo, B. (1995). Fracture Mechanics and Structural Concrete, Longman Scientific and Technical, Burnt Mill, Harlow.
53. M. Kleiber H. Antunez T.D. Hien P. Kowalczyk 1997 Parameter Sensitivity in Nonlinear Mechanics Theory and Finite Element Computations John Wiley and Sons New York
54. W. Li T. Siegmund 2004 An analysis of the indentation test to determine the interface toughness in a weakly bonded thin film coating-substrate system Acta Materialia 52 2989-2999 10.1016/j.actamat.2004.02.046
55. Z.Q. Luo J.S. Pang D. Ralph 1996 Mathematical Programs with Equilibrium Constraints Cambridge University Press Cambridge (UK)
56. G. Maier 1968 On softening flexural behaviour of beams in elasto-plasticity Rendiconti dell'Istituto Lombardo di Scienze e Lettere 102 648-677 (in Italian)
57. G. Maier 1970 A matrix structural theory of piecewise-linear plasticity with interacting yield planes Meccanica 5 55-66
58. G. Maier R. Ardito R. Fedele 2004 Inverse analysis problems in structural engineering of concrete dams Z.H. Yao M.W. Yuan e W.X. Zhong Computational Mechanics Tsinghua University Press & Springer-Verlag Beijing 97-107
59. Maier, G. and Comi, C. (2000). Energy properties of solutions to quasi-brittle fracture mechanics problems with piecewise linear cohesive crack models, In: A. Benallal (ed.) Continuous Damage and Fracture Elsevier, Amsterdam, pp. 197-205.
60. G. Maier F. Giannessi A. Nappi 1982 Identification of yield limits by mathematical programming Engineering Structures 4 86-98 10.1016/ 0141-0296(82)90042-6
61. G. Maier G. Novati Z. Cen 1993 Symmetric Galerkin boundary element method for quasi-brittle fracture and frictional contact problems Computational Mechanics 13 74-89
62. Mróz, Z. and Stavroulakis, G.E. (eds.) (2005). Identification of Materials and Structures, CISM Lecture Notes, Vol. 469, Springer-Verlag, Wien.
63. T. Nakamura G. Yu L. Prchlik S. Sampath J. Wallace 2003 Micro-indentation and inverse analysis to characterize elastic-plastic graded materials Materials Science and Engineering A 345 223-233 10.1016/ S0921-5093(02)00462-8
64. J.F. Nash 1951 Non-cooperative games Annals of Mathematics 54 286-295 0045.08202 43432 10.2307/1969529 0045.08202 43432 10.2307/1969529
65. M. Norgaard N. Pulsen O. Ravn 2000 New developments in state estimation for nonlinear systems Automatica 36 1627-1638 10.1016/ S0005-1098(00)00089-3
66. M. Ohring 1991 The Materials Science of Thin Films Academic Press New York
67. M. Ortiz A. Pandolfi 1999 Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis International Journal for Numerical Methods in Engineering 44 1267-1282 10.1002/ (SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7
68. J.S. Pang F. Tin-Loi 2001 A penalty interior point algorithm for a parameter identification problem in elasto-plasticity Mechanics of Structures and Machines 29 85-99 10.1081/SME-100000004
69. J. Planas M. Elices G.V. Guinea 1992 Measurement of the fracture energy using three-point bend tests: Part 2-Influence of bulk energy dissipation Materials and Structures 25 305-312
70. RILEM Draft Recommendation 1985 Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams Materials and Structures 18 285-290
71. J.H. Rose J. Ferrante J.R. Smith 1981 Universal binding energy curves for metals and bimetallic interfaces Physical Review 9 675-678
72. S.M. Spearing 2000 Materials issues in microelectromechanical systems (MEMS) Acta Materialia 48 179-196 10.1016/S1359-6454(99)00294-3
73. G.E. Stavroulakis 2000 Inverse and Crack Identification Problems in Engineering Mechanics Kluwer Academic Publishers Durtrecht
74. Stavroulakis, G.E., Bolzon, G., Waszczyszyn, Z. and Ziemanski, L. (2003). Inverse Analysis, In: R.O. Ritchie and I. Milne (eds.) Comprehensive Structural Integrity Vol. 3, Elsevier Science, Oxford.
75. F. Tin-Loi N.S. Que 2001a Parameter identification of quasi-brittle materials as a mathematical program with equilibrium constraints Computer Methods in Applied Mechanics and Engineering 190 5819-5836 10.1016/S0045-7825(01)00199-2
76. F. Tin-Loi N.S. Que 2002a Identification of cohesive crack fracture parameters by evolutionary search Computer Methods in Applied Mechanics and Engineering 191 5741-5760 10.1016/S0045-7825(02)00483-8
77. F. Tin-Loi N.S. Que 2002b Nonlinear programming approaches for an inverse problem in quasi-brittle fracture International Journal of Mechanical Sciences 44 843-858 10.1016/S0020-7403(02)00035-8
78. F. Tin-Loi S.H. Xia 2001b Non-holonomic elastoplastic analysis involving unilateral frictionless contact as a mixed complementarity problem Computer Methods in Applied Mechanics and Engineering 190 4551-4568 10.1016/S0045-7825(00)00332-7
79. A.A. Volinsky N.R. Moody W.W. Gerberich 2002 Interfacial toughness measurement for thin film on substrates Acta Materialia 50 441-466 10.1016/S1359-6454(01)00354-8
80. Waszczyszyn, Z. (ed.) (1999). Neural Networks in the Analysis and Design of Structures, CISM Lectures Notes, Vol. 404, Springer Verlag, Wien.
81. F.H. Wittmann X. Hu 1991 Fracture process zone in cementitious materials International Journal of Fracture 51 3-18 10.1007/BF00020849
82. L. Xiaodong D. Dongfeng B. Bhushan 1997 Fracture mechanisms of thin amorphous carbon films in nano-indentation Acta Materialia 45 4453-4461 10.1016/S1359-6454(97)00143-2
83. X.P. Xu A. Needleman 1994 Numerical simulation of fast crack growth in brittle solids Journal of the Mechanics and Physics of Solids 42 1397-1434 10.1016/0022-5096(94)90003-5
84. J. Zhi-He H. Glaucio R.H. Paulino J. Dodds 2003 Cohesive fracture modeling of elastic-plastic crack growth in functionally graded materials Engineering Fracture Mechanics 70 1885-1912 10.1016/ S0013-7944(03)00130-9