Fracture processes of concrete: Assessment of material parameters for fracture models

Fracture Processes of Concrete: Assessment of Material Parameters for Fracture Models

Volumn , Issue , 2017, Pages 1-448

  van Mier, Jan G M ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

FRACTURE MECHANICS;

FRACTURE MODEL; FRACTURE PROCESS; MATERIAL PARAMETER; TEST METHOD;

CONCRETES;

EID: 85052184526     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b22384     Document Type: Book

References (515)

1. Griffith, A.A. 1921, The phenomena of rupture and flow in solids, Phil. Trans. Royal Soc. London, Series A, 221, 163.
2. Dugdale, D.S 1960, Yielding of sheets containing slits, J. Mech. Phys. Sol., 8, 100.
3. Barenblatt, G.I. 1962, The mathematical theory of equilibrium of cracks in brittle fracture. Advances in Appl. Mech., 7, 55.
4. Dennett, D.C. 1991, Consciousness Explained, Penguin Books, London.
5. Hillerborg, A., Modéer, M. and Petersson, P.-E. 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cent. Cone. Res., 6, 773.
6. Vecchio, F. and Collins, M.P. 1981, Stress-strain characteristics of reinforced concrete in pure shear, in Advanced Mechanics of Reinforced Concrete, IABSE Colloquium Delft 1981, 1ABSE, Zürich, 34, 211.
7. Wittmann, F.H., Structure of concrete with respect to crack formation, in Fracture Mechanics of Concrete, Wittmann, F.H., Ed., Elsevier, London/New York, 1983, 43.
8. CUR 1969, Loading tests on a full size suspended beam and a model of this beam for a metro viaduct at Rotterdam, Research Report 40, CUR, Gouda, The Netherlands.
9. Yimping Xi and Jennings, H.M. 1992, Relationships between microstructure and creep and shrinkage of cement paste, in Materials Science of Concrete III, Skalny, J. Ed., The American Ceramic Society Inc., Westerville, OH, 37.
10. Mindess, S. and Young, J.F. 1981, Concrete, Prentice Hall, Englewood Cliffs, NJ., 1981.
11. Reinhardt, H.W. 1985, Beton als Constructiemateriaal-Eigenschappen en Duurzaamheid (Concrete as Structural Material - Properties and Durability), Delftse Universitaire Pets, Delft.
12. Skalny, J. Ed. 1989, Materials Science of Concrete I, The American Ceramic Society, Westerville, OH.
13. Skalny, J. Ed. 1992, Materials Science of Concrete II, The American Ceramic Society, Westerville, OH.
14. Taylor, H.F.W. 1990, Cement Chemistry, Academic Press, London.
15. Klemm, 1991, in Materials Science of Concrete II, Skalny, J. Ed., The American Ceramic Society Inc., Westerville, OH.
16. Jensen, 1991, in Materials Science of Concrete II, Skalny, J. Ed., The American Ceramic Society Westerville, OH.
17. Scrivener, K. 1989, The microstructure of concrete, in Materials Science of Concrete I, Skalny, J. Ed., The American Ceramic Society Westerville, OH, 127.
18. Bogue, R.H. 1955, The Chemistry of Portland Cement, Reinhold, New York, 2nd ed.
19. US Department of the Interior 1981, Concrete Manual, 8th revised edition, United States Govemement Printing Office, Washington, D.C.
20. Wittmann, F.H. 1977, Grundlagen eines Model Is zur Beschreibung charakteristischer Eigenschaften des Betons (Fundamentals of a model for describing characteristic properties of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 290, 45 (in German).
21. Van Breugel, K. 1992, Numerical simulation of hydration and microstructural development in hardening cement-based materials, HERON, 37(3), 1.
22. Bentz, D.P., Garboczi, E.J. and Stutzman, P.E. 1992, Computer modelling of the interfacial zone in concrete, in Interfaces in Cementitious Composites, Maso, J.C., Ed., E&FN Spon, London/New York, 107.
23. Gartner, E.M. and Gaidis, J.M. 1989, Hydration mechanisms I, in Materials Science of Concrete I, Skalny, J.P. Ed., The American Ceramic Society, Westerville, OH, 95.
24. Locher, F.W., Richartz. W. and Sprung, S. 1976, Erstarren von Zement (Hardening of cement), Zement • Kalk - Gips, 29(10), 435 (in German).
25. Odler, I. 1991, Strength of cement, Final report of RTLEM-TC 68-MMH Mathematical Modelling of Cement Hydration Task Group 1, Mater. Struct. (RILEM), 24, 143.
26. Birchall, J.D., Howard, A J. and Kendall, K 1981, Flexural strength and porosity of cements. Nature, 320(289), 388.
27. Richard, P. and Cherezy, M.H. 1994, Reactive Powder Concretes with High Ductility and 200-800 MPa Compressive Strength, ACI Spring Convention, San Francisco.
28. Bache, H.H. 1995, Concrete and concrete technology in a broad perspective, in Proceedings Nordic Symposium on Modern Design of Concrete Structures, Aakjaer, K., Ed., Aalborg University, Department of Building Technology and Structural Engineering, 1.
29. Hansen, W. et al. 1986, SMDDHC, Boston, MRS fall symposium. Proceedings Vol. 85, 105.
30. Diamond, S. and Leeman, M.E. 1995, Pore size distributions in hardened cement paste by SEM image analysis, in Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials, Diamond, S” Mindess, S., Glasser, F.P., Roberts, L.W.m Skalny, J.P. and Wakeley, L.D., Eds., MRS, Pittsburgh, PA. Vol. 370, 217.
31. Wischers, G. and Richartz, W. 1982, Einfluss der Bestandteile und der Granulometrie des Zements auf das GefUge des Zementsteins (Influence of composition and particle size on the structure of cement). Beton, 32, 10, 379 (in German).
32. Powers, T.C. 1958, The physical structure and engineering properties of concrete. Research and Development Bulletin No. 90, Portland Cement Association, Skokie, IE.
33. Feldman, R.F. and Sereda, PJ. 1968, A model for hydrated portland cement paste as deduced from sorption length change and mechanical properties, Mater. Struct. (RILEM), 1,509.
34. Hsu, T.T.C., Slate, F.O., Sturman, G.M. and Winter, G. 1963, Microcracking of plain concrete and the shape of the stress-strain curve, J. Am. Cone. Inst., 60, 209.
35. Rehm, G. Diem, P. and Zimbelmann, R. 1977, Technische Möglichkeiten zur Erhohung der Zugfestigkeit von Beton (Technical means to increase the tensile strength of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 283 (in German).
36. Mindess, S. 1989, Interfaces in Concrete, in Materials Science of Concrete I, Skalny, J. Ed., The American Ceramic Society, Westerville, OH, 163.
37. VBT 1995, (NEN5950), Regulations for Concrete Technology-Requirements, Production and Inspection, NNI September 1995.
38. Aitcin, P.C. and Pinsonneault, P. 1981, Utilisation de la Poussierede si 1 ice submicroscopique des usines de silicium et de ferrosilicium dans les beton. Proceedings CANMET, Ottawa 1981, 185.
39. Kelly, A. and Macmillan, N.H. 1986, Strong Solids, Oxford University Press.
40. ACI 1987, Silica fume in concrete. Preliminary report of ACI committee 226, ACI Mater. J., 84(2), 158.
41. Kreijger, P.C. 1984, The skin of concrete: composition and properties. Mater. Struct. (RILEM), 17(100), 275.
42. Hassanzadeh, M. 1995, Fracture mechanical properties of rocks and mortar/rock interfaces, in Microstructure of Cement-Based Systems!Bonding and Interfaces in Cementitious Materials, Diamond, S., Mindess, S., Glasser, F.P., Roberts, L.W., Skalny, J.P. and Wakeley, L.D., Eds., MRS, Pittsburgh, PA, 370. 377.
43. Maso, J.C. 1992, Interfaces in Cementitious Composites, RILEM Proceedings 18, E&FN Spon/Chapman & Hall, London/New York.
44. Diamond, S., Mindess, S., Glasser, F.P., Roberts, L.W.m Skalny, J.P. and Wakeley, L.D., Eds. 1995, Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials, Proceedings MRS Fall meeting, Boston, November 1994, MRS, Pittsburgh, PA, Vol. 370.
45. Zimbelmann, R. 1985, A contribution to the problem of cement-aggregate bond. Cent. Cone. Res., 15(5), 801.
46. Scrivener, K. and Gartner, E.M. 1988, Microstructural gradients in cement paste around aggregate particles, in Bonding in Cementitious Composites, Mindess, S. and Shah, S.P., Eds., Materials Research Society, Pittsburgh, PA, Vol. 114, 77.
47. Garboczi, E.J. and Bentz, D.P. 1991, Digital simulation of the aggregate-cement paste interfacial zone in concrete, J. Mat. Res., 6, 196.
48. Bentz, D.P., Garboczi, J. and Stutzman, P.E. 1993, Computer modelling of the interfacial zone in concrete, in Interfaces in Cementitious Composites, Maso, J.C., Ed., E&FN Spon/Chapman & Hall, London/New York, 107.
49. Hsu, T.T.C.1963, Mathematical Analysis of Shrinkage Stresses in a Model of Hardened Concrete, J. Am. Concr. Inst., 60, 371.
50. Torrenti, J. M., Acker, P., Boulay, C. and Lejeune, D. 1988, Contraintes initiates dans le beton (Eigenstresses in concrete), Bull. Liaison Labo. P. et Ch., 158, 39 (in French).
51. Acker, P., Boulay, C. and Rossi, P. 1987, On the importance of initial stresses in concrete and of the resulting mechanical effects, Cem. Cone. Res., 17, 755.
52. Vervuurt, A. and Van Mier, J.G.M. 1995, Optical microscopy and digital image analysis of bond-cracks in cement-based materials, in Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials, Diamond, S., Mindess, S., Glasser, F.P., Roberts, L.W., Skalny, J.P. and Wakeley, L.D., Eds., MRS, Pittsburgh, PA, 370, 337.
53. Vervuurt, A. 1997, Interface Fracture in Concrete, Ph.D. thesis. Delft University of Technology, Delft, The Netherlands (in preparation).
54. Vervuurt, A., Chiaia, B. and Van Mier, J.G.M. 1995, Damage evolution in different types of concrete, HERON, 40, 285.
55. Zhang, M.H. and Gjørv, O.E. 1990, Microstructure of the interfacial zone between lightweight aggregate and cement paste, Cem. Cone. Res., 20, 610.
56. Sarkar, S., Aïtcin, P.-C. and Djellouli, H. 1990, Synergistic roles of slag and silica fume in very high strength concrete, Cement, Concrete and Aggregates, 12, 32.
57. Van Mier, J.G.M. 1991, Crack face bridging in normal, high stength and lytag concrete, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 27.
58. Cai, H., Stevens Kalceff, M.A., Lawn, B.R. 1993, Deformation and fracture of mica-containing glass-ceramics in hertzian contacts, J. Mater. Res. (preprint).
59. Alexander, K.M., Wardlaw, J., Gilbert, DJ. 1965, Aggregate-cement bond, cement paste strength and the strength of concrete, in Proceedings Int’l. Conference on ‘The Structure of Concrete’, Cement & Concrete Association, 59.
60. Mindess, S. and Alexander, M. 1995, Mechanical phenomena at cement/aggregate interfaces, in Materials Science of Concrete IV, Skalny, J.P. Ed., The American Ceramic Society, Westerville, OH, 263.
61. Alexander, M.G. 1993, Two experimental techniques for studying the effects of the interfacial zone between cement paste and rock, Cem. & Cone. Res., 23, 567.
62. Alexander, M.G. and Mindess, S. 1995, Use of chevron-notched cylindrical specimens for paste/rock interface experiments, Cem. Cone. Res., 25(2), 345.
63. Tschegg, E.K., Rotter, H.M., Roelfstra, P.E., Bourgund, U. and Jussel, P. 1995, Fracture mechanical behavior of aggregate-cement matrix interfaces, J. Mater. Civil Engrg. (ASCE), 7(4), 199.
64. Taylor, M.A. and Broms, B.B. 1964, Shear bond strength between coarse aggregate and cement paste or mortar, J. Am. Cone. Inst., 61, 939.
65. Mitsui, K., Zongjin Li, Lange, D.A. and Shah, S.P. 1993, A study of the paste-aggregate interface, in Interfaces in Cementitious Composites, Maso, J.C., Ed., E&FN Spon/Chapman & Hall, London/New York, 119.
66. Lee, K.M., Buyukozturk, O. and Oumera, A. 1992, Fracture analysis of mortar-aggregate interfaces in concrete, J. Eng. Mech. (ASCE), 118(10), 2031.
67. RILEM 1985, TC-50 FMC Draft Recommendation, Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct. (RILEM), 18(106), 285.
68. Tasdemir, M.A., Maji, A.K. and Shah, S.P. 1990, Crack propagation in concrete under compression, J. Eng. Mech. (ASCE), 116(5), 1058.
69. Müller, R.K. 1964, Der Einfluss der Messlänge auf die Ergebnisse bei Dehnmessungen an Beton (Influence of measuring length on strain measurements of concrete), Beton, 5,204.
70. Stroeven, P. 1973, Some aspects of the micro mechanics of concrete, Ph.D. thesis. Delft University of Technology, The Netherlands.
71. Huet, C. 1993, An integrated approach of concrete micromechanics, in Micromechanics of Concrete and Cementitious Composites, Huet, C, Ed., Presses Polytechniques et Universitaires Rom an des. Lausanne, 117.
72. Hill, R. 1952, The elastic behaviour of a crystalline aggregate, Proc. Phys. Soc. A., 65,349.
73. Hansen, T.C. 1968, Theories of multi-phase materials applied to concrete, cement mortar and cement paste, in Proceedings Int’l. Conference on Structure of Concrete, Cement & Concrete Association, London, 16.
74. Dantu, P. 1958, Etude des contraintes dans les milieux hétérogènes. Application au béton, Annales de I’lnstitut de Bâtiment et des Travaux Publics, 11(121), 55.
75. Dantu, P. and Mandel, J. 1963, Contribution à l’étude théorique et expérimental du coefficient d’élasticité d’un milieu hétérogène mais statistiquement homogène, Annales des Poms et Chausées, Paris, 133(2), 115.
76. Newman, K. 1968, The structure and properties of concrete, an introductory review, in Proceedings Int’l. Conference on Structure of Concrete, Cement & Concrete Association, London, viii. 77.
77. Hashin, Z. and Shtrikman, S. 1963, A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solids, 11, 127.
78. Wittmann, F.H., Sadouki, H. and Steiger, T. 1993, Experimental and numerical study of effective properties of composite materials, in Micromechanics of Concrete and Cementitious Composites, Huet, C Ed, Presses Polytechniques et Universitaires Romandes, Lausanne, 59.
79. Hughes, B.P. and Ash, J.E. 1970, Anisotropy and failure criteria for concrete. Mater. Struct. (RILEM), 3, 371.
80. Van Mier, J.G.M. 1984, Strain-softening of concrete under multiaxial loading conditions, Ph.D. thesis, Eindhoven University of Technology, The Netherlands.
81. Wang, P.T., Shah, S.P. and Naaman, A.E. 1978, Stress-strain curves of normal and lightweight concrete in compression, J. Am. Cone. Inst., 75, 603.
82. Comelissen, H.A.W., Hordijk, D.A. and Reinhardt, H.W. 1986, Experimental determination of crack softening characteristics of normal weight and lightweight concrete, HERON, 31(2), 45.
83. Hordijk, D.A. and Salet, T. 1989, Experimental investigation into the tensile properties of foamed concrete, Report 25J-89-03/VFA, Delft University of Technology, Department of Civil Engineering, Stevin Laboratory, Delft, The Netherlands.
84. Hordijk, D.A. 1991, Local approach to fatigue of concrete, Ph.D. thesis. Delft University of Technology, The Netherlands.
85. Mihashi, H. and Wittmann, F.H. 1980, Stochastic approach to study the influence of rate of loading on strength of concrete, HERON, 25(3).
86. Maher, A. and Darwin, D. 1982, Mortar constituent of concrete in compression, J. Am. Cone. Inst., 79, 100.
87. Vile, G.W.D. 1968, The strength of concrete under short term static biaxial stress, in Proceedings Int’l. Conference on ‘The Structure of Concrete’, Cement & Concrete Association, London, 275.
88. Gramberg, J. 1989, A Non-Conventional View on Rock Mechanics and Fracture Mechanics, Balkema, Rotterdam.
89. Vonk, R.A. 1992, Softening of concrete loaded in compression, Ph.D. thesis, Eindhoven University of Technology, The Netherlands.
90. Wischers, G. and Lusche, M. 1972, Einfluss der innerren Spannungsverteilung das Tragverhalten von druckbeanspruchtem Normal- und Leichtbeton (Influence of internal stress distribution on the behaviour of normal weight and lightweight concrete in compression), Beton-technische Berichte, 18, 137 (in German).
91. Gallagher, JJ., Friedman, M., Handin, J. and Sowers, G.M. 1974, Experimental studies relating to microfracture in sandstone, Tectonophysics, 21, 203.
92. Vonk, R.A., Rutten, H.S., Van Mier, J.G.M. and Fijneman, H.J. 1990, Size effect in softening of concrete loaded in compression, in ECF8 ‘Fracture Behaviour and Design of Materials and Structures’, Firrao, D., Ed., EMAS Publishers, Warley, U.K., 767.
93. Riisch, H. 1960, Researches toward a general flexural theory for structural concrete, J. Am. Cone. Inst., 57, 1.
94. Sturman, G.M., Shah, S.P. and Winter, G. 1965, Effects of flexural strain gradients on micro-cracking and stress-strain behaviour of concrete, J. Am. Cone. Inst., 62, 805.
95. Hillerborg, A. 1990, Fracture mechanics concepts applied to moment capacity and rotational capacity of reinforced concrete beams. Eng. Fract. Mech., 35, 233.
96. Markeset, G. 1993, Failure of concrete under compressive strain gradients, Ph.D. thesis, Norges Tekniske Høgskole, Trondheim, Norway.
97. Bažant, Z.P. 1989, Identification of strain-softening constitutive relation from uniaxial tests by series coupling model for localization, Cem. Cone. Res., 19, 973.
98. Bieniawski, Z.I. 1967, Mechanism of brittle fracture of rock. Part I, II and III, Int. J. Rock Mech. Min. Sci., 4, 395.
99. Hudson, J.A., Brown, E.T. and Fairhurst, C. 1972, Shape of the complete stress-strain curve for rock, in: Stability of Rock Slopes, Proceedings 13th Int’l. Symposium on Rock Mechanics, Cording, EJ., Ed., ASCE, New York, 773.
100. Kotsovos, M.D. 1983, Effect of testing techniques on the post-ultimate behaviour of concrete in compression. Mater. Struct. (RILEM), 16, 3.
101. Konk, R.A., Rutten, H.S., Van Mier, J.G.M. and Fijneman, H.J. 1989. Influence of boundary conditions on softening of concrete loaded in compression, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science, London/New York, 1989, 711.
102. Van Mier, J.G.M. and Vonk, R.A. 1991, Fracture of concrete under multiaxial stress - Recent developments. Mater. Struct. (RILEM), 24, 61.
103. Van Vliet, M.R.A. and Van Mier, J.G.M. 1995, Softening behaviour of concrete under uniaxial compression, in Proceedings FraMCoS-2 ‘Fracture Mechanics of Concrete Structures’, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 383.
104. Van Vliet, M.R.A. and Van Mier, J.G.M. 1995, Concrete under uniaxial compression. Report TUD 255-95-9, October 1995, Stevin Laboratory, Delft University of Technology.
105. Van Vliet, M.R.A. and Van Mier, J.G.M. 1996, Experimental investigation of concrete fracture under uniaxial compression, Mech. Cohesive-frict. Mater., 1(1), 12.
106. Choi, S., Thienel, K-C. and Shah, S.P. 1994, Strain Softening of Concrete - RILEM Round Robin Test, Research Report NSF-ACBM, Northwestern University, Evanston, IL, July 1994.
107. Konig, G., Simsch, G. and Ulmer, M. 1994, Strain-softening of concrete, Research Report, Technische Hochschule Darmstadt, October 1994.
108. Lange-Kombak, D. and Karihaloo, B.L. 1994, Strain softening of concrete under compression. Research Report, School of Civil and Mining Engineering, University of Sydney, November 1994.
109. Bascoul, A., Arnaus, M., Balayssac, J.P. and Turatsinze, A. 1994, Report on the round-robin test of RILEM committee 148ssc, Research Report, INSA Toulouse, December 1994.
110. Dasenbrock, D., Labuz, J. and French, C. 1994, Strain softening of concrete - Preliminary summary of test results. Research Report, Department of Civil Engineering, University of Minesota, September 1994.
111. Van Geel, H.J.G.M. 1994, Uniaxial strain-softening of concrete, Report BKO-94.09, Eindhoven University of Technology, The Netherlands.
112. Gobbi, M.E. and Ferrara, G. 1995, Strain Softening of Concrete under Compression, Research report, ENEL-CRJS, Milano, May 1995.
113. Zissopoulos, D., Pavlovic, M.N. and M.D. Kotsovos 1994, Strain Softening of Concrete- RILEM Round Robin Test, Imperial College, London, and National Technical University of Athens, Greece, August 1994.
114. Taerwe, L. 1993, Empirical analysis of the fracture process in high strength concrete loaded in uniaxial compression, in Fracture and Damage of Concrete and Rock - FDCR2, Rossmanith, H.P., Ed., Chapman & Hall/E&FN Spon, London/New York, 122.
115. Markeset, G. 1995, High Strength Concrete Phase 3E - SP4 - Comments on Size Dependence and Brinleness of HSC, Research Report, SINTEF Structures and Concrete, Trondheim, Norway, February 1995
116. Armer, G.S.T. and Grimer, FJ. 1989, On the use of full stress-strain characteristics in structural analysis. Mater. Struct. (RILEM), 22, 48.
117. Neville, A.M. 1986, Properties of Concrete, Longman Scientific and Technical, Harlow, 3rded.
118. Holand, I. and Sellevold, E., Eds. 1993, Utilization of High Strength Concrete, Proceedings of the Symposium held in Lillehammer, Norway, June 20-23, 1993, Norwegian Concrete Association, Oslo.
119. Wischers, G. 1978, Aufnahme und Auswirkungen von Druckbeanspmchungen auf Beton (Behaviour of concrete under compressive stress), Betontechnische Berichte, 19, 31, (in German).
120. Rokugo, K., Ohno, S. and Koyanagi, W. 1985, Automatical measuring system of load-displacement curves including post-failure region of concrete specimens, in Pre-prints Int’l. Conference on Fracture Mechanics of Concrete, Wittmann, F.H., Ed., EPFL, Lausanne, 291.
121. Glavind, M. and Stang, H. 1991, Evaluation of the complete compressive stress-strain curve for high strength concrete, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 749.
122. CEB 1990, CEB-FIP Model Code 1990, Thomas Telford.
123. Sargin, M. 1970, Stress-strain relationships for concrete and the analysis of structural concrete sections, Solid Mechanics Division Studies No. 4, University of Waterloo, Waterloo, Ontario, Canada.
124. Plauk, G. (ed.) 1982, ‘Concrete Structures under Impact and Impulsive Loading’, Introductory Report of the RILEM/CEB/IABSE/IASS Symposium held in Berlin, June 2-4, 1982, Bundesanstalt für MaterialprUfung, Berlin.
125. Curbach, M. 1987, Festigkeitssteigerung von Beton bei hohen Belastungsgeschwindigkeiten (Strength increase of concrete under high loading rates), Schriftenreihe des Instituts für Massivbau und Baustqffiechnologie, Universitdt Karlsruhe, Vol. 1 (in German).
126. Weemeijm, J. 1992, Concrete under impact tensile loading and lateral compression, Ph.D. thesis, Delft University of Technology, The Netherlands.
127. Reinhardt, H.W. 1991, Loading rate, temperature and humidity effects, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri, A., Eds., Chapman & Hall, London/New York, 199.
128. Reinhardt, H.W. 1982, Testing and monitoring techniques for impact and impulsive loading of concrete structures, in Introductory Report of the RILEM/CEBIIABSEIIASS Symposium on ‘Concrete Structures under Impact and Impulsive Loading’, Plauk, G., Ed., Berlin, June 2-4, 1982, Bundesanstalt für Materialprüfung. Berlin, 65.
129. Ross, C.A. and Kuennen, S.T. 1989, Fracture of concrete at high strain-rates, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science, London/New York, 152.
130. Harsh, S., Shen, Z. and Darwin, D. 1990, Strain-rate sensitive behavior of cement paste and mortar in compression, ACI Materials Journal, 87, 508.
131. Reinhardt, H.W., Rossi, P. and Van Mier, J.G.M. 1990, Joint investigation of concrete at high loading rates”. Mater. Struct. (RILEM), 23(135), 213.
132. Han, N. and Walraven J.C. 1993, Sustained loading effects in high strength concrete, in Proceedings Int’l. Symposium on Utilization of High Strength Concrete, Holand, I. and Sellevold, E., Eds., Norwegian Concrete Association, Oslo, 1076.
133. Sinha, B.P., Gerstle, K.H. and Tulin, C.G. 1964, Stress-strain relations for concrete under cyclic loading, J. Am. Cone. Inst., 61, 195.
134. Karsan, I.D. and Jirsa, J.O. 1969, Behavior of concrete under compressive loadings, J. Struct. Div. (ASCE), 95, 2543.
135. Spooner, D.C. and Dougill, J.W. 1975, A quantitative assessment of damage sustained in concrete during compressive loading, Mag. Cone. Res., 27, 151.
136. Bažant Z.P. and Kim, S.S. 1979, Plastic fracturing theory for concrete, J. Eng. Mech. Div. (ASCE), 105, 407.
137. Dougill, J.W. and Rida, M.A.M. 1980, Further considerations of progressively fracturing solids, J. Eng. Mech. Div. (ASCE), 106, 1021.
138. Dougill, J.W. 1983, Constitutive relations for concrete and rock: Applications and extensions of elasticity and plasticity theory, in Preprints William Prager Symposium on ‘Mechanics of Geomaterials: Rocks, Concretes, Soils’, Bažant, Z.P., Ed., Northwestern University, Evanston, JL, 17.
139. Spooner, D.C, Pomeroy, CD. and Dougill, J.W. 1976, Damage and energy dissipation in cement pastes in compression, Mag. Cone. Res., 28, 21.
140. Bažant, Z.P. and Oh, B.-H. 1983, Crack band theory for fracture of concrete. Mater. Struct. (RILEM), 16, 155.
141. Evans, R.H. and Marathe, H.S. 1968, Microcracking and stress-strain curves for concrete in tension, Mater. Struct. (RILEM), 1, 61.
142. Petersson, P.-E. 1981, Crack growth and development of fracture zones in plain concrete and similar materials, Report TVBM-1006, Lund Institute of Technology, Sweden.
143. Mindess, S. 1991, Fracture process zone detection, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri, A., Eds., Chapman & Hall, London, Chap. 5.
144. Van Mier, J.G.M. 1990, Internal crack detection in single edge notched concrete plates subjected to uniform boundary displacement, in Micromechanics of Failure of Quasi Brittle Materials. Shah, S.P., Swartz, S.E. and Wang, M.L., Eds., Elsevier Applied Science Publishers, London/New York, 33.
145. Van Mier, J.G.M. 1990, Fracture process zone in concrete: A three dimensional growth process, in ECF8 ‘Fracture Behaviour and Design of Materials and Structures’, Firrao, D., Ed., EMAS Publishers, Warley, UK, 567.
146. Van Mier, J.G.M. 1991, Mode I fracture of concrete: Discontinuous crack growth and crack interface grain bridging, Cem. Cone. Res., 21, 1.
147. Van Mier, J.G.M. 1992, Scaling in tensile and compressive fracture of concrete, in Applications of Fracture Mechanics to Reinforced Concrete, Carpinteri, A., Ed., Elsevier Applied Science, London/New York, Chap. 5.
148. Van Mier, J.G.M. and Nooru-Mohamed, M.B. 1990, Geometrical and structural aspects of concrete fracture. Eng. Fract. Mech., 35, 617.
149. Bascoul, A., Kharchi. F. and Maso, J.C. 1989, Concerning the measurement of the fracture energy of a micro-concrete according to the crack growth in a three points bending test on Notched Beams, in Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., Springer Verlag, New York, 396.
150. Swartz, S.E. and Refai, T. 1989, Cracked surface revealed by dye and its utility in determining fracture parameters, in Fracture Toughness and Fracture Energy, Mihashi, H., Takhashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 509.
151. Turatsinze, A. 1992. Caracterisation inicrostrocturale de la fissuration des betons et mortiers en mode I propagation (Microstructural characterization of mode I cracking in concrete and mortar), Ph.D. thesis, University Paul Sabatier, Toulouse (in French).
152. Mazars, J. 1981, Mechanical damage and fracture of concrete structures, in Proceedings ICF5 ‘Advances in Fracture Research’, Francois, D., Ed., Vol. 4, Pergamon Press, Oxford, 1499.
153. Løland. K.E. 1980, Continuous damage model for load-response estimation of concrete, Cem. Cone. Res., 10, 395.
154. Simha, K.R.Y., Foumey, W.L., Barker, D.B. and Dick, R.D. 1986, Dynamic photo-elastic investigation of two pressurised cracks approaching one another. Eng. Fract. Mech., 23,237.
155. Van Mier, J.G.M., Schlangen, E., Visser, J.H.M. and Vervuurt, A. 1992, Experimental and numerical analysis of cracking in concrete and sandstone, in Topics in Applied Mechanics - Integration of Theory and Applications in Applied Mechanics, Dijksman, J.F. and Nieuwstadt, F.T.M., Eds., Kluwer Academic Publishers, Dordrecht, 65.
156. Schlangen, E. 1993, Experimental and numerical analysis of fracture processes in concrete, Ph.D. thesis. Delft University of Technology, The Netherlands, 1993.
157. Sempere, J.-C. and Macdonald, K.C. 1986, Overlapping spreading centers: implications from crack growth simulation by the displacement discontinuity method, Tectonics, 5,151.
158. Steinbrech, R.W., Dickerson, R.M. and Kleist, G. 1991, Characterization of the fracture behaviour of ceramics through analysis of crack propagation studies, in Toughening Mechanisms in Quasi Brittle Materials, Shah, S.P., Ed., NATO ASI series, Vol. E-195, Kluwer Academic Publishers, Dordrecht, 287.
159. Swanson, P.L., Fairbanks, CI., Lawn, B.R., Mai, Y.-W. and Hockey, B.J. 1987, Crack-interface grain bridging as a fracture resistance mechanism in ceramics: I, experimental study on alumina, J. Am. Ceram. Soc., 70, 279.
160. Zeyher, A. 1993, Simulated materials reveal microfractures. Computers in Physics, 7(4), 382.
161. Carpinteri, A. 1992, Fractal nature of material microstructure and size effects on apparent mechanical properties. Internal Report 1/92, Politecnico di Torino.
162. Schlangen, E. and Van Mier, J.G.M. 1991, Lattice model for numerical simulations of concrete fracture, in Proceedings Int’l. Conference on Dam Fracture, Saouma, V.E., Dungar, R. and Morris, D., Eds., University of Colorado, Boulder, Sept. 11-13, 1991, Electric Power Research Institute, Palo Alto, CA, 511.
163. Vonk, R.A., Rutten, H.S., Van Mier, J.G.M. and Fijneman, HJ. 1991, Micromechanical simulation of concrete softening, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 129.
164. Wang, J. and Huet, C. 1993, A numerical model for studying the influences of pre-existing microcracks and granular character on the fracture of concrete materials and structures, in Micromechanics of Concrete and Cementitious Composites, Huet, C, Ed., Presses Polytechniques et Universitaires Romandes, Lausanne, 229.
165. Duda, H. 1991, Grain-model for the determination of the stress-crack width relation, in Analysis of Concrete Structures by Fracture Mechanics, Elfgren, L. and Shah, S.P., Eds., Chapman & Hall, London/New York, 88.
166. Lange, D.A., Jennings, H.M. and Shah, S.P. 1993, Relationship between fracture surface roughness and fracture behaviour of cement paste and mortar, J. Am. Ceram. Soc., 76(3), 589.
167. Nomura, N., Mihashi, H. and Izumi, M. 1991, Properties of fracture process zone and tension softening behaviour of concrete, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 51.
168. Walraven, J.C, Den Uijl, J., Strobrand, J., Al-Zubi, N., Gijsbers, J. and Naaktgeboren, M. 1995, Structural lightweight concrete:recent research, HERON, 40(1), 5.
169. Carpinteri, A. 1985, Interpretation of Griffith instability as a bifurcation of the global equilibrium, in Application of Fracture Mechanics to Cementitious Composites, Shah, S.P., Ed., Martinus Nijhoff Publishers, Dordrecht, 287.
170. Barr, B. and Tokatly, Z.Y. 1992, Size effects in two compact test specimen geometries, in Application of Fracture Mechanics to Reinforced Concrete, Carpinteri, A., Ed., Elsevier Applied Science, London/New York, Chap. 4.
171. Brühwiler, E. 1988, Bruchmechanik von Staumauerbeton unter Quasi-Statischer und Erdbeben-dynamischer Belastung (Fracture mechanics of dam concrete under quasi-static and eartquake loading), Ph.D. thesis, Ecole Polytechnique Federale de Lausanne (in German).
172. Mobasher, B., Ouyang, C, Castro-Montero, A. and Shah, S.P. 1991, Tensile behaviour of fibre reinforced concrete, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 269.
173. Aveston, J., Cooper, G.A. & Kelly, A. 1971, Single and multiple fracture, in Proc. NPL Conference on the Properties of Fibre Composites, National Physical Laboratory, London, England, 15.
174. Wang, Y., Li, V.C and Backer, S. 1990, Experimental determination of tensile behavior of fiber reinforced cements, ACI Mater. J., 87, 461.
175. Li, V.C. 1992, Performance driven design of fiber reinforced cementitious composites, in Fibre Reinforced Cement & Concrete, Swamy, R.N., Ed., Chapman & Hall/E&FN Spon, London/New York, 12.
176. Stang, H. 1995, Micromechanical parameters, fracture processes and application of fiber reinforced concrete, in Fracture of Brittle Disordered Materials, Baker, G and Karihaloo, B.L., Eds., Chapman & Hall/E&FN Spon, London/New York, 131.
177. Balaguru, P.N. and Shah, S.P. 1992, Fibre Reinforced Cement Composites, McGraw-Hill, New York.
178. Salet, T.A.M. 1990, Structural analysis of sandwich beams composed of reinforced concrete faces and a foamed concrete core, Ph.D. thesis, Eindhoven University of Technology, The Netherlands.
179. Bonzel, J. and Kadlecek, V. 1970, Einfluss der Nachbehandelung und des Feuchtig-keitszustands auf die Zugfestigkeit des Betons (Influence of curing and moisture content on the tensile strength of concrete), Beton, 20, 303 and 351 (in German).
180. Founé, B. 1985, Note sur la chute de résistance à la traction du bgton leger consecutive a l’arrêt de la cure humide, Ann. de I’lnst. Techn. du batiment et des Travaux Publics, 432, 1 (in French).
181. Brameshuber, W. 1988, Bruchmechanische Eigenschaften von jungem Beton (Fracture mechanics properties of young concrete), Ph.D. thesis, Universität Karlsruhe (in German).
182. Van Mier, J.G.M. and Schlangen, E. 1989, On the stability of softening systems. In Fracture of Concrete and Rock-Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B” Eds., Elsevier Applied Science Publishers, London/New York, 387.
183. Alvaredo, A.M. and Wittmann, F.H. 1992, Crack formation due to hygral gradients, in Fracture Mechanics of Concrete Structures, Bažant, Z.P., Ed., Elsevier Applied Science, London/New York, 960.
184. Van Mier, J.G.M. 1990, Mode I behavior of concrete: Influence of the rotational stiffness outside the crack zone, in Analysis of Concrete Structures by Fracture Mechanics, Elfgren, L. and Shah, S.P., Eds., Chapman & Hall, London/New York, 19.
185. Quenard, D. and Sallee, H. 1992, Water vapour adsorption and transfer in cement-based materials: a network simulation. Mater. Struct. (RILEM), 25, 515.
186. Sadouhi, H. and van Mier, J.G.M. 1997, Simulation of hygral crack growth in concrete repair systems, and me so-level analysis of moisture flow in cement composites using a lattice type approach, accepted for publication in Mater. Struct. (RILEM), and Analysis of hygral induced crack growth in multiphase materials, HERON, 41(4).
187. Reinhardt, H.W. 1984, Fracture mechanics of an elastic softening material like concrete, HERON, 29(2).
188. Comelissen, H.A.W. 1984, Fatigue failure of concrete in tension, HERON, 29(4).
189. Reinhardt, H.W. and Comelissen, H.A.W. 1984, Post-peak cyclic behavior of concrete in uniaxial tensile and alternating tensile and compressive loading, Cem. Cone. Res., 14,263.
190. Comelissen, H.A.W., Hordijk, D.A. and Reinhardt, H.W. 1986, Experiments and theory for the application of fracture mechanics to normal and lightweight concrete, in Fracture Toughness and Fracture Energy, Wittmann, F.H., Ed., Elsevier, London/New York, 565.
191. Gylltoft, K. 1983, Fracture mechanics models for fatigue in concrete structures, Ph.D. thesis, Luleå University of Technology, Sweden.
192. Comelissen, H.A.W. & Siemes, 1985, Plain concrete under sustained tensile or tensile and compressive fatigue loadings, in Proceedings BOSS Conference, Elsevier, 487.
193. Körmeling, H. 1986, Strain rate and temperature behaviour of steel fibre concrete in tension, Ph.D. thesis. Delft University of Technology, The Netherlands.
194. Reinhardt, H.W., Körmeling, H.A. and Zielinski, AJ. 1986, The split hopkinson bar, a versatile tool for impact testing of concrete. Mater. Struct. (RILEM), 19, 55.
195. Reinhardt, H.W. 1982, Concrete under impact loading: tensile strength and bond, HERON, 27(3).
196. Rossi, P., Van Mier, J.G.M., Boulay, C. and LeMaou, F. 1992, The dynamic behaviour of concrete: influence of free water. Mater. Struct. (RILEM), 25, 509.
197. Zielinski, A J. 1982, Fracture of concrete and mortar under uniaxial impact tensile loading, Ph.D. thesis. Delft University of Technology, The Netherlands.
198. Bažant, Z.P. and Pfeiffer, P.A. 1986, Shear fracture tests of concrete, Mater. Struct. (RILEM), 19, 111.
199. Davies, J. 1991, Numerical and experimental study of development of fracture path under mixed mode loading, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall Publishers, London/New York, pp. 717.
200. Davies, J. 1992, Macroscopic study of crack face bridging phenomenon in mixed-mode loading, in Fracture Mechanics of Concrete Structures, Bažant, Z.P., Ed., Elsevier Applied Science, London/New York, 713.
201. Barr, B., Hasso, A.B.D. and Khalifa, S.M.A. 1987, A study of mode II shear fracture of notched beams, cylinders and cones, in Fracture of Concrete and Rock, SEM-RILEM Int’ I. Conf., Houston, Shah, S.P. and Swartz, S.E., Eds., SEM, Bethel, CT, 370.
202. Carpinteri, A., Ferrara, G. and Melchiorri, G. 1989, Single edge notched specimen subjected to four point shear: an experimental investigation, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science Publishers, London/New York, 605.
203. Carpinteri, A., Ferrara, G., Melchiorri, G. and Valente, S. 1990, The four point shear test on single notched specimens: an experimental and numerical analysis, in Fracture Behaviour and Design of Materials and Structures, Firrao, D., Ed., EMAS Publishers, Warley, U.K., 667.
204. Hassanzadeh, M. and Hillerborg, A. 1989, Concrete properties in mixed mode fracture, in Fracture Toughness and Fracture Energy, Mihashi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 565.
205. Hassanzadeh, M. 1992, Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements, Ph.D. thesis, Lund Institute of Technology, Report TVBM 1010, Sweden.
206. Reinhardt, H.W., Comelissen, H.A.W. and Hordijk, D.A. 1989, Mixed mode fracture tests on concrete, in Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., Springer Verlag, New York, 119.
207. Iosipescu, N. 1967, New accurate procedure for single shear testing of metals, J. Materials, 2(3), 537.
208. Swartz, S.E. and Tana, N.M. 1990, Mixed mode crack propagation and fracture in concrete. Eng. Fract. Mech., 35, 137.
209. Van Mier, J.G.M., Schlangen, E. and Nooru-Mohamed, M.B. 1992, Shear fracture in cementitious composites. Part I: Experimental observations, part II: Numerical simulations, in Proceedings FraMCoS 1, Bažant, Z.P., Ed., Elsevier Applied Science Publishers, London/New York, 659.
210. Ingraffea, A.R. and Panthaki, M.J. 1986, Analysis of shear fracture tests of concrete beams, in Finite Element Analysis of Reinforced Concrete Structures, Meyer, C. and Okamura, H., Eds., American Society of Civil Engineers, New York, 151.
211. Carpinteri, A. and Swartz, S.E. 1991, Mixed-mode crack propagation in concrete, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri A., Eds., Chapman & Hall Publishers, London/New York, Chap. 3.
212. Schlangen, E. and Van Mier, J.G.M. 1993, Mixed-mode fracture propagation: A combined numerical and experimental study, in Fracture and Damage of Concrete and Rock (FDCR-2), Rossmanith, H.P., Ed., Chapman & Hall/E&FN Spon, London/New York, 166.
213. Hassanzadeh, M., Hillerborg, A. and Zhou, F.P. 1987, Tests of material properties in mixed-mode I and II, in Pre-Proceedings SEM-RILEM International Conference on Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., SEM, Bethel, CT, 353.
214. Nooru-Mohamed, M.B. 1992, Mixed mode fracture of concrete: an experimental approach, Ph.D. thesis. Delft University of Technology, The Netherlands.
215. Keuser, W. and Walraven, J.C. 1989, Fracture of plain concrete under mixed-mode conditions, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science Publishers, London/New York, 625.
216. Paulay, T. and Loeber, PJ. 1974, Shear transfer by aggregate interlock, ACI Special Publication SP-42, American Concrete Institute, Detroit, 1.
217. Laible. J.P., White, R.N. and Gergely, P. 1977, Experimental investigation of seismic shear transfer accross cracks in concrete nuclear containement vessels, ACI Special Publication SP-53, American Concrete Institute, Detroit, 203.
218. Walraven, J.C. 1980, Aggregate interlock: A theoretical and experimental analysis, Ph.D. thesis. Delft University of Technology, The Netherlands.
219. Millard, S.G. and Johnson, R.P. 1984, Shear transfer accross cracks in reinforced concrete due to aggregate interlock and dowel action, Mag. of Concrete Res., 36(126), 9.
220. Van Mier, J.G.M. and Nooru-Mohamed, M.B. 1989, Fracture of concrete under tensile and shearlike loadings, in Fracture Toughness and Fracture Energy • Test Methods for Concrete and Rock, Mihashi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 549.
221. Yin, W.S., Su, E.C.M., Mansur, M.A. and Hsu, T.T.C. 1990, Fibre reinforced concrete under biaxial compression, Eng. Fract. Mech., 35, 261.
222. Lankard, D.R. and Newell, J.K. 1984, Preparation of highly reinforced steel fibre reinforced concrete composites, in Fiber Reinforced Concrete (ACI-SP 81), American Concrete Institute, Detroit, 286.
223. Reinhardt, H.W. and Naaman, A.E., Eds. 1992, High Performance Fiber Reinforced Cement Composites, Chapman & Hall/E&FN Spon, London/New York.
224. Naaman, A.E. and Reinhardt, H.W. 1996, High Performance Fiber Reinforced Cement Composites - 2, Chapman & Hall/E&FN Spon, London/New York.
225. Naaman, A.E. 1992, SIFCON: Tailored properties for structural performance, in High Performance Fiber Reinforced Cement Composites, Reinhardt, H.W. and Naaman, A.E., Eds., Chapman & Hall/E&FN Spon, London/New York, 18.
226. Naaman, A.E., Paramasivan, P., Balazs, G., Bayasi, Z.M., Eibl, J., Erdelyi, L., Hassoun, N., Krstulovic-Opara, N., Li, V.C. and Lohrman, G.1996, Reinforced and prestressed concrete using hpfrcc matrices, in High Performance Fiber Reinforced Cement Composites - 2, Chapman & Hall/E&FN Spon, London/New York, Chap. 8.
227. Van Mier, J.G.M. 1995, Fracture mechanics of concrete: Will applications start to emerge?, HERON, 40(2), 147.
228. Van Mier, J.G.M., Stang, H. and Ramakrishnan, V. 1996, Practical structural applications of FRC and HPFRCC, in High Performance Fiber Reinforced Cement Composites - 2, Chapman & Hall/E&FN Spon, London/New York, Chap. 12.
229. Van Mier, J.G.M. and Timmers, G. 1992, Shear fracture in slurry infiltrated fibre concrete (SIFCON), in High Performance Fibre Reinforced Cement Composites, Reinhardt, H.W. and Naaman, A.E., Eds., Chapman & Hall/E&FN Spon, London/New York, 348.
230. Van Mier, J.G.M. and Timmers G.1992, SIFCON subjected to shear: Effect of material anisotropy on strength and stiffness, in Fibre Reinforced Cement and Concrete, Swamy, R.N., Ed., Chapman & Hall, London/New York, 245.
231. Bažant, Z.P. and Pratt, P.C. 1988, Measurement of mode III fracture energy of concrete, Nucl. Engrg. Design, 106, 1.
232. Yacoub-Tokatly, Z. and Barr, B. 1989, Mode III fracture - A tentative test geometry, in Fracture of Concrete and Rock-Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science Publishers, London/New York, 596.
233. Xu Daoyuan and Reinhardt, H.W. 1989, Softening of concrete under torsional loading, in Fracture of Concrete and Rock-Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science Publishers, London/New York, 39.
234. Bažant, Z.P., Sener, S. and Pratt, P.C. 1988, Size effect tests of torsional failure of plain and reinforced concrete beams. Mater. Struct. (RILEM), 21, 425.
235. Visser, J.H.M. 1997, Tensile hydraulic fracture of concrete and sandstone, Ph.D. thesis, Delft University of Technology, The Netherlands.
236. Kupfer, H. 1973, Das Verhalten des Betons unter Mehrachsiger Kurzzeitbelastung unter Besonderer Berucksichtigung des Zweiachsiger Beanspruchung (Behavior of concrete under multiaxial short term loading, with emphasis on biaxial loading), Deutscher Ausschuss für Stahlbeton, Vol. 229, Berlin, (in German).
237. Linse.D. and Stegbauer, A. 1976, Festigkeit und Verformungsverhalten von Leichtbeton, Gas beton, Zementstein, und Gips unter Zweiachsigen Kurzzeitbelastung (Strength and eformation of lightweight concrete, foamed concrete, hardened cement paste and gypsum under short term biaxial loading), Deutscher Ausschuss für Stahlbeton, Vol.254, Berlin (in German).
238. Gerstle, K.H., Linse, D.L., Bertacchi, P., Kotsovos, M.D., Ko, H.-Y., Newman, J.B., Rossi, P., Schickert, G., Taylor, M.A., Traina, L.A., Zimmerman, R.M. and Bellotti, R. 1978, Strength of concrete under multiaxial stress states, in Proceedings Douglas McHenry Int’l. Symposium on ‘Concrete and Concrete Structures’, ACI SP 55, American Concrete Institute, Detroit, MI, 103.
239. Kobayashi, S. and Koyanagi, W. 1972, Fracture criteria of cement paste, mortar and concrete subjected to multiaxial compressive stresses, in Proceedings RILEM Symposium on ‘The Deformation and the Rupture of Solids Subjected to Multiaxial Stress’, Cannes, part I ‘Concrete’, paper 1/9, 1972, 131.
240. Schickert, G. and Danssmann, J. 1984, Behaviour of concrete stressed by high hydrostatic compression, in Proceedings RILEM/CEB Symposium on ‘Concrete under Multiaxial Conditions’, Vol. 2, Presses de l’Université Paul Sabatier, Toulouse, 69.
241. Bažant, Z.P., Bishop, F.C. and Chang, T.P. 1986, Confined compression tests of cement paste and concrete up to 300 ksi, J. Am. Cone. Inst., 83, 553.
242. Richardt, F.E., Brandtzaeg. A. and Brown, R.L. 1929, The behaviour of plain and spirally reinforced cencrete in compression. University of Illinois Engineering Experiment Station, Bulletin no. 190.
243. Newman, J.B. and Newman, K. 1972, The cracking and failure of concrete under combined stresses and its implications for structural design, in Proceedings RILEM Symposium on ‘The Deformation and the Rupture of Solids Subjected to Multiaxial Stress’, Cannes, part I ‘Concrete’, paper 1/10, 149.
244. Newman, J.B. 1979, Concrete under complex stress, in Developments in Concrete Technology -1, Lydon, F.D., Ed., Applied Science Publishers, London, 151.
245. Kotsovos, M.D. and Newman, J.B. 1977, Behavior of concrete under multiaxial stress, J. Am. Cone. Inst., 74, 443.
246. Kotsovos, M.D. 1979, Effect of stress-path on the behaviour of concrete under triaxial stress states, J. Am. Cone. Inst., 76, 213.
247. Ahmad, S.H. and Shah, S.P. 1982, Complete triaxial stress-strain curves for concrete, J. Struct. Div. (ASCE), 108, 728.
248. Jamet, P., Millard, A. and Nahas, G. 1984, Triaxial behaviour of a micro-concrete complete stress-strain curves for confining pressures ranging from 0 to 100 MPa, in Proceedings R1LEMICEB Symposium on ‘Concrete under Multiaxial Conditions’, Vol. 1, Presses de l’Université Paul Sabatier, Toulouse, 133.
249. Visser, J.H.M. and Van Mier, J.G.M. 1994, Hydraulic fracturing in the tensile regime, in Computer Methods and Advances in Geomechanics, Siriwardane, H.J. and Zaman, M.M., Eds., Balkema, Rotterdam, 1647.
250. Willam, K.J. and Warnke, E.P. 1974, Constitutive model for the triaxial behaviour of concrete, in Proceedings Colloquium on Concrete Structures Subjected to Triaxial Stresses, 1ABSE Report 19, IABSE, Zurich.
251. Schickert, G. and Winkler, H. 1977, Versuchsergebnisse zur Festigkeit und Verformung von Beton bei mehraxialer Druckbeanspruchung (Strength and deformation of concrete under multiaxial compressive stress), Deutscher Ausschuss für Stahlbeton, Vol. 277, Berlin, (in German).
252. Podgorski, J. 1985, General failure criterion for isotropic media, J. Eng. Mech. (ASCE), 111, 188.
253. Van Mier, J.G.M. 1986, Fracture of concrete under complex stress, HERON, 31(3).
254. Nelissen, LJ.M. 1972, Biaxial testing of normal concrete, HERON, 18(1).
255. Willam, K. Hurlbut, B. and Sture, S. 1985, Experimental constitutive and computational aspects of concrete fracture, in Proc. Seminar on Finite Element Analysis of Reinforced Concrete Structures, Ch. Meyer and H. Okamura, Eds., ASCE, New York, 149.
256. Paterson, M.S. 1978, Experimental Rock Deformation - The Brittle Field, Springer Verlag, New York.
257. Michelis, P.N. and Demiris, C.A. 1984, Conception et construction d’une vraie cellule triaxiale (Design and construction of a true triaxial cell), CJ?. Acad. Sc. Paris, t.299, Serie II, no.8, 375 (in French).
258. Michelis, P.N. 1985a, A true triaxial cell for low and high pressure experiments, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 22, 183.
259. Michelis, P.N. 1985b, Polyaxial yielding of granular rock, J. Eng. Mech. (ASCE), 111, 1049.
260. Kamp, W. and Cochram, M.J. 1991, Yield envelope investigation of felser sandstone with true triaxial compression tests including post failure behaviour, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 761.
261. Bieniawski, Z.I. Denkhaus, H.G. and Vogler, U.W. 1969, Failure of fractured rock. Int. J. Rock Mech. Min. Sci., 6, 323.
262. Hallbauer, D.K., Wagner, H. and Cook, N.G.W. 1973, Some observations concerning the microscopic and mechanical behaviour of quartzite specimens in stiff, triaxial compression tests. Int. J. Rock Mech. Min. Sci. Geomech Abstr., 10, 713.
263. Bongers, J.P.W., Rutten, H.S., Van Mier, J.G.M. and Fijneman, H.J. 1994, Softening behaviour of concrete loaded in multiaxial compression, in Computer Modelling of Concrete Structures, Mang, H., Bicanic, N. and De Borst, R., Eds., Pineridge Press, Swansea, 303.
264. Smith, T.R. and Schulson, E.M. 1993, The brittle compressive failure of fresh-water columnar ice under biaxial loading, Acta Metall. Mater., 41(1), 153.
265. Horii, H. and Nemat-Nasser, S. 1985, Compression-induced microcrack growth in brittle solids: axial splitting and shear failure, J. Geophys. Res., 90, 3105.
266. Dyskin, A.V., Germanovich, L.N., Jewell, RJ., Joer, H., Krasinski, J.S., Lee, K.K., Roegiers, J.-C., Sahouryeh, E. and Ustinov, K.B. 1994, Study of 3D mechanisms of crack growth and interaction in uniaxial compression, ISRM communications (pre-print).
267. Cannon, N.P., Schulson, E.M., Smith, T.R. and Frost, H.J. 1990, Wing cracks and brittle compressive fracture, Acta Metall. Mater, 38(10), 1955.
268. Schom, H. and Berger-Böcker, T. 1989, Test method for determining process zone position and fracture energy of concrete. Experimental Techniques, June 1989, 29-33.
269. Grimer, FJ. and Hewitt, R.E. 1971, The form of the stress-strain curve of concrete interpreted with a diphase concept of material behavior, in Structure, Solid Mechanics and Engineering Design, Te’eni, M, Ed., Wiley Interscience, 681.
270. Wawersik, W.R. and Fairhurst, C. 1970, A study of brittle rock fracture in laboratory compression experiments. Int. J. Rock Mech. Min. Sci., 7, 561.
271. Gopalaratnam, V.S. and Shah, S.P. 1985, Softening response of plain concrete in direct tension, J. Am. Cone. Inst., 82, 310.
272. Li, Z., Kulkarni, S.M. and Shah, S.P. 1993, New test method for obtaining softening response of unnotched concrete specimen under uniaxial tension, Experimental Mechanics, September 1993, 181.
273. Gjørv, O.E., Sorensen, S.I. and Amesen, A. 1977, Notch sensitivity and fracture toughness of concrete, Cem. Cone. Res., 7, 333.
274. Schlangen, E. and Van Mier, J.G.M. 1995, Crack propagation in sandstone: A combined experimental and numerical approach, Rock Mech. Rock Eng., 28(2), 93.
275. Visser J.H.M. and Van Mier, J.G.M. 1992, Hydraulically driven fractures of concrete and rock: a new test cell, in Proceedings FraMCoSl, Bažant, Z.P., Ed., Elsevier Applied Science, London/New York, 1992, 512.
276. Linse, D. 1978, Lösung Versuchstechnischer Fragen bei der Ermittlung des Festigkeits und Verformungs verhaltens von Beton unter Dreiachsiger Belastung (Solutions for experimental problems in triaxial testing of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 292, Berlin (in German).
277. Winkler, H. 1985, Grundsätzliche Untersuchungen zum Geräteeinfluss bei dermehraxialen Druckprüfung von Beton (Fundamental study on the influence of test-equipment on the multiaxial behavior of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 366, Berlin (in German).
278. Meier, R.W., Ko, H.-Y. and Sture, S. 1985, Direct tensile loading apparatus combined with a cubical test cell for testing rocks and concrete, Geotech. Testing J. (GTJODJ), 8, 71.
279. Sture, S. and Ko, H.-Y. 1978, Strain-softening of brittle geologic materials, Int. J. Num. Anal. Methods in Geo. Mech., 2, 237.
280. Sture, S. and Desai, C.S. 1979, Fluid cushion truly triaxial or multiaxial testing device, Geotech. Testing J. (GTJODJ), 2, 20.
281. Launay, P., Gachon, H. and Poitevin, P. 1970, Déformation et résistance ultime du béton sous étrainte triaxiale (Deformation and strength of concrete under multiaxial stress), Annales de Vlnstitut Technique du Bâtiment et des Travaux Publics, 269, 23 (in French).
282. Launay, P. and Gachon. H. 1971, Strain and ultimate strength of concrete under triaxial stress, in Proceedings SMiRT-1, paper H 1/3, Berlin, 23.
283. Mills, L.L. and Zimmerman, R.M. 1970, Compressive strength of plain concrete under multiaxial loading conditions, J. Am. Cone. Inst., 67, 802.
284. Bertacchi, P. and Bellotti, R. 1972, Experimental research on deformation and failure of concrete under triaxial loads, in Proceedings RILEM Symposium on ‘The Deformation and the Rupture of Solids Subjected to Multiaxial Stress’, Cannes, part I ‘Concrete’, paper 1/3, 37.
285. Nqjiri, Y., Kotani, K. and Abe, Y. 1984, Failure envelope of concrete subjected to multiaxial compressive stresses, in Proceedings RILEMICEB Symposium on ‘Concrete under Multiaxial Conditions’, Vol.1, Presses de l’Université Paul Sabatier, Toulouse, 141.
286. Erdei, C.K. 1980, Finite element analysis and tests with a new load transmitting medium to measure compressive strength of brittle materials. Mater. Struct. (RILEM), 13, 83.
287. Labuz, J.F. and Bridell, J.M. 1991, Reducing frictional constraint in compression testing through lubrication. Experimental Mechanics, 1991.
288. Hilsdorf, H. 1965, Die bestimmung der Zweiachsiger Festigkeit des Betons (Determination of the biaxial strength of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 173, Berlin (in German).
289. Schickert, G. 1973, On the influence of different load application techniques on the lateral strain and fracture of concrete specimens, Cem. Cone. Res., 3, 487.
290. Schickert, G. 1980, Schwellenwerte beim Betondruckversuch (Threshold numbers for compressive testing of concrete), Deutscher Ausschuss für Stahlbeton, Vol. 312, Berlin (in German).
291. Guinea, G.V., Planas, J. and Elices, M. 1992, Measurement of the fracture energy using three-point bend tests: Part 1 - Influence of experimental procedures. Mater. Struct. (RILEM), 25(148), 212.
292. Carpinteri, A. and Ferro, G. 1994, Size effects on tensile fracture properties: a unified explanation based on disorder and fractality of concrete microstructure, Mater. Struct. (RILEM), 27(174), 563.
293. Reinhardt, H.W., Comelissen, H.A.W. and Hordijk, D.A. 1986, Tensile tests and failure analysis of concrete, J. Struct. Engrg. (ASCE), 112, 2462.
294. Van Mier, J.G.M. Schlangen, E. and Vervuurt, A. 1995, Lattice type fracture models for concrete, in Continuum Models for Materials with Microstructure, Mühlhaus, H.-B., Ed., John Wiley & Sons, Chap. 10.
295. Van Mier, J.G.M., Vervuurt, A. and Schlangen, E. 1994, Boundary and size effects in uniaxial tensile tests: a numerical and experimental study, in Fracture and Damage of Quasibrittle Structures, Bažant, Z.P., Bittnar, Z., Jirásek, M. and Mazars, J., Eds., E&FN Spon, London/New York, 289.
296. Daerga, P.A. 1992, Some experimental fracture mechanics studies in mode I of concrete and wood. Licentiate thesis, Luleå University of Technology, Sweden.
297. Budnik, J. 1985, Bruch- und Verformungsverhalten harzmodifizierter und faserverstärkter Betone bei einachsiger Zugbeanspruchung (Fracture and deformation of polymer modified and steel fibre concrete subjected to uniaxial tension), Ph.D. thesis, Ruhr University, Bochum (in German).
298. Hordijk, D.A., Reinhardt, H.W. and Comelissen, H.A.W. 1987, Fracture mechanics parameters of concrete from uniaxial tensile tests as influenced by specimen length, in Pre-Proceedings SEM I RILEM Conference on ‘Fracture of Concrete and Rock’, Shah, S.P. and Swartz, S.E., Eds., Society of Experimental Mechanics, Bethel, CT, 138.
299. Hurlbut, B. 1985, Experimental and computational strain-softening investigation of concrete, MS thesis, CEAE Department, University of Colorado, Boulder.
300. Carpinteri, A. and Ferro, G. 1992, Apparent tensile strength and fictitious fracture energy of concrete: A fractal geometry approach to related size effects, in Fracture and Damage of Concrete and Rock (FDCR-2), Rossmanith, H P., Ed., Chapman & Hall/E&FN Spon, London/New York, 1993, 86.
301. Ferro, G. 1994, Effeti di scala sulla resistenza a trazione dei materiali (Scale effects on tensile properties of materials), Ph.D. thesis, Politecnico di Torino (in Italian).
302. Heilmann, H.G., Hilsdorf, H. and Finsterwalder, K. 1969, Festigkeit unde Verformung von Beton unter Zugspannungen (Strength and deformation of concrete subjected to uniaxial tension), Deutscher Ausschuss für Stahlbeton, Heft 203, Berlin (in German).
303. Carpinteri, A., Ferro, G. and Chiaia, B. 1995, Multifractal scaling law: An extensive application to nominal strength size effect of concrete structures, Ati de Dipartimento No. 51, Politecnico di Torino, 145 p.
304. Bažant, Z.P. 1984, Size effect in blunt fracture: concrete, rock, metal, J. Eng. Mech. (ASCE), 110,518.
305. Bažant, Z.P. 1986, Mechanics of distributed cracking, Appl. Mech. Rev., 39(5), 675.
306. Weibull, W. 1939, A statistical theory of the strength of materials, Proc. Royal Soc. Swedish Inst. Eng. Res., No. 159.
307. Arslan, A. and Ince, R. 1995, The neural network-based analysis of size effect in concrete fracture, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 693.
308. Leicester, R.H. 1973, Effect of size on the strength of structures. Forest Products Laboratory, Division of Building Research Technological Paper No. 71, CSIRO, Australia, I.
309. Walsh, P.F. 1979, Fracture of plain concrete, Indian Cone. J., 46, 469.
310. Van Vliet, M.R.A. and Van Mier, J.G.M. 1996, Size effect of concrete in uniaxial tension, in. Localized Damage III, Nisitani, H., Aliabadi, M.H., Nishida, S-L, and Cartwright, D J., Eds., Computational Mechanics Publication, Southampton, 823.
311. Van Geel, HJ.G.M. 1995, Behaviour of concrete in plane-strain compression, Report BK095.19, Eindhoven University of Technology, October 1995.
312. Reinhardt, H.W. and Hordijk, D.A. 1988, Various techniques for the assessment of the damage zone between two saw cuts, in Strain Localization and Size Effect due to Cracking and Damage, Mazars, J. and Bažant, Z.P., Eds., ENS de Caelum, Preprints, 1.
313. Jacobs, M.M.J., Hopman, P.C. and Molenaar, A.A.A. 1995, The crack growth mechanism in asphaltic mixes, HERON, 40(3), 181.
314. Karihaloo, B.L. and Nallathambi, P. 1991, Notched beam test: Mode I fracture toughness, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri, A., Eds., Chapman & Hall, London/New York, Chap.1.
315. Rossi, P., Brühwiler. E., Chhuy, S., Jenq, Y.-S. and Shah, S.P. 1991, Fracture properties of concrete as determined by means of wedge splitting tests and tapered double cantilever beam tests, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri, A., Eds., Chapman & Hall, London. Chap. 2.
316. Kobayashi, A.S., Hawkins, N.M., Barker, D.B. and Liaw, B.M. 1985, Fracture process zone of concrete, in Applications of Fracture Mechanics to Cementitious Composites, Shah, S.P., Ed., Martinus Nijhoff Publishers, Dordrecht, 25.
317. Desrues, J. 1983, On the application of stereo-photogrammetry to the measurement of large strains. Rev. Franc. Mecan. (Grenoble), 3 (in french).
318. Lierse, J. and Ringkamp, M. 1983, Investigations into cracked reinforced concrete structural elements with the aid of photo-elastic methods, in Fracture Mechanics of Concrete, Wittmann, F.H., Ed., Elsevier Applied Science Publishers, Amsterdam, 95.
319. Van Mier, J.G.M. 1988, Fracture study of concrete specimens subjected to combined tensile and shear loading, in Proceedings GAM AC Int. Conf. on ‘Measurement and Testing in Civil Engineering’, Jullien, J.F., Ed., CAST/INSA Publishers, Villeurbanne, France, 337.
320. Raiss, M.E., Dougill, J.W. and Newman, J.B. 1989, Observation of the development of fracture process zones in concrete, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science, London/New York, 243.
321. Cedolin, L., Del Poli, S. and Iori, I. 1987, Tensile behavior of concrete, J. Eng. Mech. (ASCE), 113(3), 431.
322. Castro-Montero, A., Miller, R.A. and Shah, S.P. 1991, Study of the fracture process in mortar with laser holographic measurements, in Toughening Mechanism in Quasi-Brittle Materials, Shah, S.P., Ed., Kluwer Academic Publishers, Dordrecht, 249.
323. Maji, A.K. and Shah, S.P. 1991, Laser interferometry methods, in Fracture Mechanics Test Methods for Concrete, Shah, S.P. and Carpinteri, A., Eds., Chapman & Hall, London/New York, Chap. 6.
324. Torrenti, J.M., Desrues, J., Benaija, E.H. and Boulay, C. 1991, Stereophotogrammetry and localization in concrete under compression, J. Eng. Mech., 117, 1455.
325. Torrenti, J.M., Benaija, E.H. and Boulay, C. 1992, Strain localization in concrete in compression: The influence of boundary conditions, in Proceedings FraMCoS-l, Bažant, Z.P., Ed., Elsevier Applied Science Publishers, London/New York, 281.
326. Sunderland, H., Tolou, A. and Huet, C. 1993, Multilevel numerical microscopy and tridimensional reconstruction of concrete microstructure, in Micromechanics of Concrete and Cementitious Composites, Huet, C, Ed., Presses Polytechniques et Univesitaires Romandes, Lausanne, 171.
327. Lange, D.A., Jennings, H.M. and Shah, S.P. 1993, Relationship between fracture surface roughness and fracture behavior of cement paste and mortar, J. Am. Ceram. Soc., 76(3), 589.
328. Tail, R.B. and Garret, G.G. 1986, In situ double torsion fracture studies of cement mortar and cement paste inside a scanning electron microscope, Cem. Cone. Res., 16, 143.
329. Krstulovic-Opera, N. 1993, Fracture process zone presence and behaviour in mortar specimens, ACI Materials Journal, 90, 618.
330. Hwang, C.L., Wang, M.L. and Miao, S. 1993, Proposed healing and consolidation mechanisms of rock salt revealed by ESEM, Microscopy Res. Techn., 25, 456.
331. Ollivier, J.P. 1985, A nondestructive procedure to observe the microcracks of concrete by scanning electron microscopy, Cem. Cone. Res., 15, 1055.
332. Turatsinze, A. 1992, Caracterisation microstructurale de la fissuration des betons et mortiers en mode I propagation (Microstructural characterization of mode 1 cracking in concrete and mortar), Ph.D. thesis. University Paul Sabatier, Toulouse (in French).
333. Vervuurt, A., Chiaia, B. and van Mier, J.G.M. 1996, Damage evolution in different types of concrete by means of splitting tests, HERON, 40(4), 285.
334. Goto, Y. 1971, Cracks formed in concrete around deformed tension bars, J. Am. Cone. Inst., 68, 244.
335. Goudswaard, I. and Vonk, R.A. 1990, A detection method for internal cracks in concrete specimens. Report TUE-BKO-89.12, Eindhoven University of Technology (in Dutch).
336. Zheng, Z., Cook, N.G.W. and Myer, L.R. 1989, Stress induced microcrack geometry in unconfmed and confined axial compressive tests, in Rock Mechanics as a Guide for Efficient Utilization of Natural Resources, Khair, A., Ed., Balkcma, Rotterdam, 749.
337. Myer, L.R., Kemeny, J.M., Zheng, Z., Suarez, R., Ewy, R.T. and Cook, N.G.W. 1992, Extensile cracking in porous rock under differential compressive stress, Appl. Mech. Rev. (ASME), 45, 263.
338. Nemati, K.M. 1994, Generation and interaction of compressive stress-induced microcracks in concrete, Ph.D. thesis. University of California at Berkeley, USA.
339. Fishbine, B.H., Macy, RJ., Ross, TJ. and Wang, M.L. 1990, SEM dynamic microscopy, in Micromechanics of Failure of Quasi Brittle Materials, Shah, S.P., Swartz, S.E. and Wang, M.L., Eds., Elsevier Applied Science Publishers, London/New York, 365.
340. Berthelot, J.M. and Robert, J.L. 1990, Damage evaluation of concrete test specimens related to failure analysis, J. Eng. Mech., 116(3), 587.
341. Wissing, B. 1988, Acoustic emission of concrete, Masters thesis. Department of Civil Engineering, Delft University of Technology, (in Dutch).
342. Landis, E.N. and Shah, S.P. 1995, Experimental measurements of microfracture in cement-based materials, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 315.
343. Moczko, A.T., and Stroeven, P. 1994, Cracking behaviour resulting from a corroding bar in concrete, in Proceedings ECF-10 Structural Integrity: Experiments, Models and Applications, Schwalbe, K.-H. and Berger, C, Eds., EMAS Publishers, Warley. UK, 721.
344. Duda, H. 1991, Grain-model for the determination of the stress-crack width relation, in Analysis of Concrete Structures by Fracture Mechanics, Elfgren, L. and Shah, S.P., Eds., Chapman & Hall, London/New York, 88.
345. Labuz, J., Shah, S.P. and Dowding, C.H. 1985, Experimental analysis of crack propagation in granite. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 22, 85.
346. Ohtsu, M. 1988, Source inversion of acoustic emission waveform, Proc. JSCE, 398/1-10, 71.
347. Suaris, W. and Van Mier, J.G.M. 1995, Acoustic emission source characterization in concrete under biaxial loading, Mater. Struct. (RILEM), 28(182), 444.
348. Savic, M., Ziolkowski, A.M. and Cockram, M.J. 1991, Acoustic monitoring of laboratory scale dynamic processes under high pressure, in Proc. 1991 SEG Meeting, Houston, November 10-14.
349. Berthaud, Y. 1991, Damage measurements in concrete via an ultrasonic technique. Part I Experiments. Part II Modelling, Cem. Cone. Res., 21, 73 and 219.
350. Schickert, G. 1985, Heutige Praxis der Zerstörungsfreie Prüfmethoden im Bauwesen (Modem applications of non-destructive testing in building engineering), Proceedings of the ‘ZfPBau-Symposium Zerstörungsfreie Prüfung im Bauwesen’, Schickert, G. and Schnitger, D., Eds., BAM, Berlin, 91.
351. 3 bend specimens, J. Mater. Sci. Letters, I, 327.
352. Hu, X.Z. and Wittmann, F.H. 1989, Fracture process zone and K, curve of hardened cement paste and mortar, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science, 307.
353. Hu, XZ. 1990, Fracture process zone and strain-softening in cementitious materials, Research Report 1, Institute for Building Materials, ETH Zürich.
354. Foote, R.M.L., Mai, Y.W. and Cotterell, B. 1987, Process zone size and crack growth measurements in fibre cements, in Fibre Reinforced Concrete Properties and Applications, Shah, S.P. and Batson, G.B., Eds., SP-105, American Concrete Institure, Detroit, 55.
355. Otsuka, K. 1989, X-ray technique with contrast medium to detect fine cracks in reinforced concrete, in Fracture Toughness and Fracture Energy - Test Methods for Concrete and Rock, Mihahshi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema. Rotterdam, 521.
356. Luong, M.P. 1990, Infrared thermovision of damage processes in concrete and rock. Eng. Fract. Mech., 35, 291.
357. Mendenhall, W. 1968, Introduction to Linear Models and the Design and Analysis of Experiments, Wadsworth.
358. Cochran, W.G. and Cox, G.M. 1957, Experimental Designs, John Wiley & Sons, New York, 2nd edition.
359. Imam, M., Vandewalle, L and Mortelmans, F. 1995, Are current concrete strength tests suitable for high strength concrete?. Mater. Struct. (RILEM), 28(181), 384.
360. c) of plain concrete using three-point bend tests. Mater. Struct. (RILEM), 23(138), 457.
361. RILEM 1990b, TC 89-FMT Draft Recommendation, Size-effect method for determining fracture energy and process zone size of concrete, Mater. Struct. (RILEM), 23(138), 461.
362. Wittmann, F.H. 1992, Numerical Models in Fracture Mechanics of Concrete, Pre-Proceed-ings of the 1st Bolomey workshop, ETH Zürich, July 16-17, 1992, Appendix 2.
363. Ouchterlony, F. 1989, Fracture toughness testing of rock with core based specimens, the development of an ISRM standard, in Fracture Toughness and Fracture Energy • Test Methods for Concrete and Rock, Mihashi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 231. (HFL 280.-)
364. Jenq, Y.S. and Shah, S.P. 1985, Two-parameter fracture model for concrete, J. Engng. Mech. Div. (ASCE), 111(10), 1227.
365. Barr, B.I.G. and Swartz, S.E. 1996, The need for standard testing, in Proceedings of the FraMCoS-2 Conference Workshop on “Numerical modelling and determination of fracture mechanics parameters,” AEDIF1CATIO Publishers, Freiburg, 1655.
366. Elices, M., Guinea, G.V. and Planas, J. 1992, Measurement of the fracture energy using three-point bend tests: Part 3 - Influence of cutting the P-δ tail. Mater. Struct. (RILEM), 25(150), 327.
367. Planus, J., Elices, M. and Guinea, G.V. 1992, Measurement of the fracture energy using three-point bend tests: Part 2 - Influence of bulk energy dissipation. Mater. Struct. (RILEM), 25, 305.
368. Elices, M. and Planas, J. 1996, Numerical modelling and determination of fracture mechanics parameters. Hillerborg Type Models, in Proceedings of the FraMCoS-2 Conference Workshop on “Numerical modelling and determination of fracture mechanics parameters,” AEDIFICATIO Publishers, Freiburg, 1611.
369. r of concrete. Mater. Struct. (RILEM), 18, 291.
370. Tschegg, E.K. and Linsbauer, H.N. 1986, Prüfeinrichtung zur Ermittlung von bruchmechanischen Kennwerten (Testing procedure for determination of fracture mechanics parameters), Patentschrift No. A-233186, Östereichisches Patentamt.
371. Linsbauer, H.N. and Tschegg, E.K. 1986, Fracture energy determination of concrete with cube-shaped specimens, Zement und Beton, 31, 38.
372. Roelfstra, P.E. and Wittmann, F.H. 1986, Numerical method to link strain softening with failure of concrete. In Fracture Toughness and Fracture Energy, Wittmann, F.H., Ed., Elsevier, London, 163.
373. Bažant, Z.P. and Li, Z. 1996, Zero-brittleness size effect method for one-size fracture test of concrete, J. Eng. Mech. (ASCE), in press.
374. RILEM 30-TE Draft Recommendation 1983, Testing equipment. Mater. Struct. (RILEM), 16(97).
375. Van Mier, J.G.M., Shah, S.P., Amaud, M., Balayssac, J.P., Bascoul, A. Choi, S., Dasenbrock, D., Ferrara, G., French, C, Gobbi, M.E., Karihaloo, B.L., König, G., Kotsovos, M.D., Labuz, J., Lange-Kornbak, D., Markeset, G., Pavlovic, M.N., Simsch, G., Thienel, K-C., Turatsinze, A., Ulmer, M., Van Geel, H.J.G.M., Van Vliet, M.R.A., Zissopoulos, D. 1996, Strain-softening of concrete in uniaxial compression - Report of the round-robin test carried out by RILEM TC I48SSC, Materials and Structures (RILEM), (to appear).
376. Mühlhaus, H.B. (Ed.) 1995, Continuum Models for Materials with Microstructure, Wiley, Chichester.
377. Charmet, J.C, Roux, S. and Guyon, E., Eds. 1990, Disorder and Fracture, Plenum Press, New York.
378. Rashid, Y.R. 1968, Analysis of prestressed concrete pressure vessels. Nuclear Eng. Design, 1, 334.
379. Walraven, J.C. and Reinhardt, H.W. 1981, Concrete mechanics. Part A - Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading, HERON, 26(1a).
380. De Groot, A.K., Kusters, G.M.A. and Monnier, Th. 1981, Concrete mechanics. Part B -Numerical modelling of bond-slip behaviour, HERON, 26(1b).
381. Grootenboer, HJ., Leijten, S.F.C.H. and Blaauwendraad, J. 1981, Concrete mechanics. Part C -Numerical models for reinforced concrete structures in plane stress, HERON, 26(1c).
382. Van Mier, J.G.M., (Ed.) 1987, Examples of non-linear analysis of reinforced concrete structures with DIANA, HERON, 32(3).
383. De Borst, R. and Muhlhaus, H.-B. 1991, Continuum models for discontinuous media, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 601.
384. Ngo, D. and Scordelis, A.C 1967, Finite element analysis of reinforced concrete beams, J. Am. Cone. Inst., 64, 152.
385. Petersson, P.-E. and Gustavsson, PJ. 1980, A model for calculation of crack growth in concrete-like materials, in Numerical Methods in Fracture Mechanics, Owen, D.RJ. and Luxmoore, A.R., Eds., Pineridge Press, Swansea, 707.
386. Ingraffea, A. and Saouma, V. 1984, Numerical modelling of discrete crack propagation in reinforced and plain concrete, in Application of Fracture Mechanics to Concrete Structures, Sih, G.C. and Di Tommaso, A., Eds., Martinus Nijhoff Publishers, Dordrecht, Chap. 4.
387. Carpinteri, A. and Valente, S. 1988, Size-scale transition from ductile to brittle failure: A dimensional analysis approach, in Proceedings CNRS-NSF Workshop on Strain Localization and Size Effects due to Cracking and Damage, Mazars, J. and Bažant, Z.P., Eds., Elsevier Applied Science, 477.
388. Valente, S. 1991, Influence of friction on cohesive crack propagation, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 695.
389. Sousa, J.O., Lutz, E.D. and Ingraffea, A.R. 1991, Three dimensional simulation of hydrau-lically driven fracture propagation in a rock mass, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 545.
390. Elices, M. and Planas, J. 1989, Material models, in Fracture Mechanics of Concrete Structures, Elfgren, L. Ed., Chapman & Hall, London/New York, Chap. 3.
391. Hrennikoff, A. 1941, Solution of problems of elasticity by the framework method, J. Appl. Mech., A169.
392. Hansen, A., Roux, S. and Herrmann, HJ. 1989, Rupture of central force lattices, J. Phys. France, 50, 733.
393. Herrmann, HJ., Hansen, H. and Roux, S. 1989, Fracture of disordered, elastic lattices in two dimensions, Phys. Rev. B, 39, 637.
394. Herrmann, HJ. and Roux, S. 1990, Patterns and Scaling for the Fracture of Disordered Media, Elsevier Applied Science Publishers B.V. (North Holland).
395. Herrmann, HJ. 1991, Patterns and scaling in fracture, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 195.
396. Schlangen, E. and Van Mier, J.G.M. 1992, Experimental and numerical analysis of micro-mechanisms of fracture of cement-based composites, Cem. Cone. Composites, 14, 105.
397. Vervuurt, A., Schlangen, E. and Van Mier, J.G.M. 1993, A numerical and experimental analysis of the pull-out behaviour of steel anchors embedded in concrete. Report 255-93-1/VFI, Delft University of Technology, The Netherlands.
398. Vervuurt, A., Van Vliet, M.R.A., Van Mier, J.G.M. and Schlangen, E. 1995, Simulations of tensile fracture in concrete, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIF1CATIO Publishers, Freiburg, 353.
399. Mourkazel, C. and Herrmann, H J. 1992, A vectorizable random lattice. Preprint HLRZII 92, KFA, Jiilich.
400. Schlangen, E. and Van Mier, J.G.M. 1994, Fracture simulations in concrete and rock using a random lattice, in Computer Methods and Advances in Geomaterials, Siri wardane, H. and Zaman, M.M., Eds., Balkema, Rotterdam, 1641.
401. Schlangen, E. and Garboczi, EJ. 1996, New method for simulating fracture using an elastically uniform random geometry lattice. Int. J. Eng. Sci., 34, 1131.
402. Jirasek, M. and Bažant, Z.P. 1995, Particle model for quasibrittle fracture and application to sea ice. Int. J. Fract., 69, 201.
403. Burt, NJ. and Dougill, J.W. 1977, Progressive failure in a model heterogeneous medium, J. Eng. Mech. Div. (ASCE), 103, 365.
404. Zubelewicz, A. and Bažant, Z.P. 1987, Interface element modeling of fracture in aggregate composites, J. Eng. Mech. (ASCE), 113, 1619.
405. Bažant, Z.P., Tabbara, M.R., Kazemi, M.T. and Pijaudier-Cabot, G. 1990, Random particle model for fracture of aggregate or fiber composites, J. Eng. Mech. (ASCE), 116, 1686.
406. Berg, A. and Svensson, U. 1991, Datorsimulering och analysis av brottförlopp i en heterogen materialstruktur (Simulation of fracture in heterogeneous materials). Report no. TVSM-5050, Lund Institute of Technology, Department of structural Engineering, Lund, Sweden (in Swedish).
407. Schom, H. and Rode, U. 1989, 3D-Modelling of fracture process in concrete by numerical simulation, in Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., Springer Verlag, New York, 220.
408. Murat, M., Anholt, M. and Wagner, H.D. 1992, Fracture behaviour of short-fiber reinforced materials, J. Mater. Res., 7(11), 3121.
409. Termonia, Y. and Meakin, P. 1986, Formation of fractal cracks in a kinetic fracture model. Nature, 320, 429.
410. Schlangen, E. and Van Mier, J.G.M. 1992, Simple lattice model for numerical simulation of fracture of concrete materials and structures”. Mater. Struct. (RILEM), 25(153), 534.
411. Schlangen, E. 1995, Computational aspects of fracture simulations with lattice models, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 913.
412. Adley, M.D. and Sadd, M.H. 1992, Continuum models for materials with lattice-like microstructure, Comp. Struct., 43, 13.
413. Beranek, WJ. and Hobbelman, GJ. 1994, Constitutive modelling of structural concrete as an assemblage of spheres, in Computer Modelling of Concrete Structures’, Mang, H., Bicanic, N. and De Borst, R., Eds., Pineridge Press, Swansea, 37.
414. Van Vliet, M.R.A. and Van Mier, J.G.M. 1996, Comparison of lattice type fracture models for concrete under biaxial loading regimes, in Proceedings IUTAM Symposium on Size-Scale Effects in the Failure Mechanisms of Materials and Structures, Torino, October 1994, Carpinteri, A., Ed., Chapman & Hall/E&FN Spon, 43.
415. Van Mier, J.G.M., Schlangen, E., Vervuurt, A. and Van Vliet, M.R.A. 1995, Damage analysis of brittle disordered materials: concrete and rock, in Proceedings ICM-7, The Hague, May 28 - June 2, 1995, Bakker, A., Ed., Delft University Press, 1995, 101.
416. Roelfstra, P.E., Sadouhi, H. and Wittmann, F.H. 1985, Le béton numénque (Numerical Concrete), Mater. Struct. (RILEM), 18, 327 (in French).
417. Wang, J. 1994, Development and application of a micromechanics-based numerical approach for the study of crack propagation in concrete, Ph.D. thesis, EPFL Lausanne.
418. De Schutter, G. and Taerwe, L. 1993, Random particle model for concrete based on Delaunay triangulation. Mater. Struct. (RILEM). 26, 67.
419. Chen, W.F. and Saleeb, A.T. 1982, Constitutive Equations for Engineering Materials, John Wiley & Sons, New York.
420. Chen, WJ. 1982, Plasticity in Reinforced Concrete, McGraw-Hill, New York, 1982.
421. Lade, P. V. 1982, Three-parameter failure criterion for concrete, J. Eng. Mech. Div. (ASCE), 111, 188.
422. Ottosen, N.S. 1977, A failure criterion for concrete, J. Eng. Mech. Div. (ASCE), 103,527.
423. Podgorski, J. 1985, General failure criterion for isotropic media, J. Eng. Mech. (ASCE), 111, 188.
424. CEB 1983, Concrete under multiaxial states of stress - Constitutive equations for practical design, Comiti Euro-lntrenational du Béton, EPFL-Lausanne, Bulletin d’Information No. 156, June 1983.
425. Timoshenko, S.P. and Goodier, J.N. 1970, Theory of Elasticity, McGraw-Hill, 3rd edition.
426. Broek, D. 1982, Elementary Engineering Fracture Mechanics, Martinus Nijhoff Publishers, 3rd revised ed.
427. Ewalds, H.W. and Wanhill, R.J.H. 1986, Fracture Mechanics, VSSD, Delft.
428. Anderson, T.L. 1991, Fracture Mechanics - Fundamentals and Applications, CRC Press, Boca Raton, FL.
429. Moavenzadeh, F. and Kuguel, R. 1969, Fracture of Concrete, J. Mater., 4(3), 497.
430. Tada, H., Paris, P.C. and Irwin, G.R. 1973, The Stress Analysis of Cracks Handbook, Del Research Corporation, Heilertown.
431. 1-solutions for single edge notched specimens under fixed end displacements. Int. J. Fracture, 32, S3.
432. Murakami, Y., Ed. 1987, Stress-Intensity Factor Handbook, Pergamon Press.
433. Zaitsev, Y.W. and Wittmann, F.H. 1981, Simulation of crack propagation and failure of concrete, Mater. Struct. (RILEM), 14, 357.
434. Costin, L.S. 1983, A microcrack model for the deformation and failure of brittle rock, J. Geophys. Res., 88, 9485.
435. Kachanov, M. Tsukrov, I. and Shafiro, B. 1994, Effective elastic properties of solids with randomly located defects, in Probabilities and Materials, Breysse, D., Ed., NATO ASI series, Vol. E-269, Kluwer Academic Publishers, Dordrecht, 1994, 225.
436. Kemeny, J.M. and Cook, N.G.W. 1991, Micromechanics of deformation in rocks, in Toughening Mechanisms in Quasi-Brittle Materials, Shah, S.P., Ed., Kluwer Academic Publishers, Dordrecht, 155.
437. Nihei, K.T., Myer, L.R., Kemeny, J.M., Liu, Z. and Cook, N.G.W. 1994, Effects of heterogeneity and friction on the deformation and strength of rock, in Fracture and Damage of Quasibrittle Structures, Bažant, Z.P., Bittnar, Z., Jirásek. M. and Mazars, J., Eds., E&FN Spon, London/New York, 479.
438. Ortiz, M. 1988, Microcrack coalescence and macroscopic crack growth initiation in brittle solids. Int. J. Solids Structures, 24, 231.
439. Karihaloo, B.L. 1991, Tensile response of Quasi-Brittle Materials, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 163.
440. Sammis, C.G. and Ashby, M.F. 1985, The failure of brittle porous solids under compressive stress states. Acta. Metall. Mater., 34(3), 511.
441. Carrasquillo, R.L., Slate, F.O. and Nilson, A.H. 1981, Micro-cracking and behavior of high strength concrete subject to short term loading, J. Am. Cone. Inst., 78, 179.
442. Attiogbe, E.K. and Darwin, D. 1985, Submicroscopic cracking of cement paste and mortar in compression. Structural Engineering and Engineering Materials Report No. 16, University of Kansas, Lawrence, Kansas.
443. Darwin, D. and Mohamed Nagib Abou-Zeid 1995, Application of automated image analysis to the study of cement paste microstructure, in Microstructure of Cement-Based Systems, Proceedings of Symposium Va/Vb of the MRS Fall meeting 1994, Boston, November 28 - December 2, 1994, Materials Research Society, Pittsburgh (in press).
444. Bažant, Z.P. 1987, Snapback instability at crack ligament tearing and its implication for fracture micromechanics, Cem. Cone. Res., 17,951.
445. Rice, J.R.1968, Mathermatical analysis in the mechanics of fracture, in Fracture - An Advanced Treatise 2, Liebowitz, H., Ed., Academic Press, New York, 191.
446. Horii, H., Hasegawa, A. and Nishino, F.1989, Fracture process and bridging zone model and influencing factors in fracture of concrete, in Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., Springer Verlag, New York, 205.
447. Sih, G.C. (Ed.) 1972, Mechanics of Fracture I. Methods of Analysis and Solutions of Crack Problems, Noordhoff Int. Publ., Leyden.
448. Hillerborg, A. 1989, Stability problems in fracture mechanics testing, in Fracture of Concrete and Rock - Recent Developments, Shah, S.P., Swartz, S.E. and Barr, B., Eds., Elsevier Applied Science Publishers, London/New York, 369.
449. Foote, R.M.L., Mai, Y.-W. and Cotterell, B. 1986, Crack growth resistance curves in strain-softening materials, J. Mech. Phys. Solids, 34(6), 593.
450. Elfgren, L. Ed. 1989, Fracture Mechanics of Concrete Structures - From Theory to Applications, Chapman & Hall, London/New York.
451. Fanping Zhou 1988, Some aspects of tensile fracture behaviour and structural response of cementitious materials, Report TVBM 1008, Lund Institute of Technology, Sweden.
452. Rots, J.G. 1988, Computational modelling of concrete fracture, Ph.D. thesis. Delft University of Technology, The Netherlands.
453. Pamin, J. 1994, Gradient-dependent plasticity in numerical simulation of localization phenomena, Ph.D. thesis, Delft University of Technology, The Netherlands.
454. Hordijk, D.A., Van Mier. J.G.M. and Reinhardt, H.W. 1989, Material properties, in Fracture Mechanics of Concrete Structures, Elfgren, L., Ed., Chapman & Hall, London/New York, Chap.4.
455. Schechtman, D., Blech, L, Gratias, D. and Cahn, J.W. 1984, Metallic phase with long-range orientational order and no translational symmetry, Phys. Rev. Lett., 53, 1951.
456. Penrose, R. 1989, The Emperors New Mind - Concerning Computers, Minds and the Laws of Physics, Oxford University Press.
457. Majumdar, A J. and Laws, V. 1991, Glass Fibre Reinforced Cement, BSP Professional Books, Oxford.
458. Zeyher, A. 1993, Simulated materials reveal microfractures, Computers in Physics, 7(4), 382.
459. Breijsse, D. 1991, Understanding some aspects of damage development using hierarchic lattices, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 241.
460. Beranek, WJ. and Hobbelman, G.J. 1995, 2D and 3D modelling of concrete as an assemblage of spheres. Revaluation of the failure criterion, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 965.
461. Arslan, A., Schlangen, E. and Van Mier, J.G.M. 1995, Effect of model fracture law and porosity on tensile softening of concrete, in Proceedings FraMCoS-2, Wittmann, F.H., Ed., AEDIFICATIO Publishers, Freiburg, 45.
462. Bui, H.D., Tanaka, M., Bonnet, M., Maigre, H., Luzzato, E. and Reynier, Eds. 1994, Inverse Problems in Engineering Mechanics, Balkema, Rotterdam.
463. Wittmann, F.H, Roelfstra. P.E., Mihashi, H., Huang, Y.-Y., Zhang, X.-H. and Nomura, N. 1987, Influence of age of loading, water-cement ratio and rate of loading on fracture energy of concrete. Mater. Struct. (RILEM), 20(116), 103.
464. Planas, J., Guinea, G.V. and Elices, M. 1993, Softening curves for concrete and structural materials, in Fracture and Damage of Concrete and Rock - FDCR-2, Rossmanith. H.P., Ed., Chapman & Hall/E&FN Spon, 3.
465. Roelfstra, P.E. 1989, Simulation of failure in computer generated structures. In Fracture Toughness and Fracture Energy, Mihashi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 313.
466. Stankowski, T. 1990, Numerical simulation of progressive failure in particle composites, Ph.D. thesis, CEAE Department, University of Colorado, Boulder.
467. Schlangen, E. and Van Mier, J.G.M. 1992, Micromechanical analysis of fracture of concrete. Int. J. Damage Mech., 1, 435.
468. Margoldová, J. and Van Mier, J.G.M. 1994, Simulation of compressive fracture in concrete, in Proceedings ECFI0 ‘Structural Integrity: Experiments, Models, Applications’, Schwalbe. K.-H. and Berger C, Eds., EMAS Publishers, Warley, UK, pp. 1399.
469. Schlangen, E. 1995, Fracture simulations of brittle heterogeneous materials, in Proceedings 10th ASCE-EMD Conference, Sture, S. Ed., ASCE, New York, 130.
470. Schlangen, E. and Van Mier, J.G.M. 1993, Lattice model for simulating fracture of concrete, in Numerical Models in Fracture Mechanics of Concrete, Wittmann, F.H., Ed” Balkema, Rotterdam, 195.
471. Chiaia, B. and van Mier, J.G.M. 1996, Evaluation of damage in different concretes: fractal analysis and relation to toughness characteristics, in Mechanisms and Mechanics of Damage and Failure (ECFll), Petit, J., de Fouquet, J., Henaff, G., Villechaise, P. and Dragon, A., Eds., EMAS Publishers, Warley. UK, 1871.
472. Huang, X. and Karihaloo, B.L. 1993, The role of microcracks and microvoids in the toughening of quasi-brittle materials, in Fracture and Damage of Concrete and Rock -FDCR-2, Rossmanith, H.P., Ed., E&FN Spon, London/New York, 34.
473. Arslan, A., Schlangen, E. and Van Mier, J.G.M. 1995, A study on effect of fracture law and porosity on concrete fracture under uniaxial tension, Research report 255-95-8, Delft University of Technology, Faculty of Civil Engineering, April 1995.
474. Chiaia, B., Vervuurt, A. and Van Mier, J.G.M. 1996, Lattice model evaluation of progressive failure in disordered panicle composites, Eng. Fract. Mech., Special Issue on Statistical Fracture, Eds. M. Ostoja-Starzewski and H.J. Liebowitz (in press).
475. Liu, Y.-Q., Hikosaka, H. and Bolander, J.E. 1995, Modelling compressive failure using rigid particle systems, in Proceedings FraMCoS-2, F.H. Wittmann, Ed., AEDIFICATIO Publishers, Freiburg, 375.
476. Bolander, J.E. and Kobayashi, Y. 1995, Size effect mechanisms in numerical concrete fracture, in Proceedings FraMCoS-2, F.H. Wittmann, Ed., AEDIFICATIO Publishers, Freiburg, 535.
477. Van Mier, J.G.M., Vervuurt, A. and Schlangen, E. 1994, Crack growth simulations in concrete and rock, in Probabilities and Materials. Tests, Models and Applications, Breysse, D., Ed., NATO-ASI Series E Applied Sciences, Vol. 269, Kluwer Academic Publishers, Dordrecht, 377.
478. Van Mier, J.G.M. and Vervuurt, A. 1995, Micromechanical analysis and experimental verification of boundary rotation effects in uniaxial tension tests on concrete, in Fracture of Brittle Disordered Materials: Concrete, Rock and Ceramics, Baker, G. and Karihaloo, B.L., Eds., E&FN Spon, London/New York, 406.
479. Rots, J.G. and De Borst, R. 1989, Analysis of concrete fracture in ‘direct’ tension. Int. J. Solids Struct., 25, 1381.
480. Rots, J.G. and De Borst, R. 1987, Analysis of mixed-mode fracture in concrete, J. Engng. Mech. (ASCE), 113, 1739.
481. Rots, J.G., Kusters, G.M.A. and Blaauwendraad, J. 1989, Strain-softening simulations of mixed-mode concrete fracture, in Fracture of Concrete and Rock, Shah, S.P. and Swartz, S.E., Eds., Springer Verlag, New York, 175.
482. Pamin, J. and De Borst, R. 1995, Numerical simulation of localization phenomena using gradient plasticity and finite elements, HERON, 40(1), 71-92.
483. Ohtsu, M. 1991, BEM analysis of crack propagation based on a discrete crack model of fracture mechanics, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., Chapman & Hall/E&FN Spon, London/New York, 571.
484. Arrea, M. and Ingraffea, A.R. 1982, Mixed mode crack propagation in mortar and concrete. Report No. 81-13, Department of Structural Engineering, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY.
485. Rots, J.G., Nauta, P., Kusters, G.M.A. and Blaauwendraad, J. 1985, Smeared crack approach and fracture localization in concrete, HERON, 30(1).
486. De Borst, R. 1986, Non-linear analysis of frictional materials, Ph.D. thesis. Delft University of Technology, The Netherlands.
487. Nooru-Mohamed, M.B., Schlangen, E. and Van Mier, J.G.M. 1993, Experimental and numerical study on the behavior of concrete subjected to biaxial tension and shear, Adv. Cement Based Mater., 1, 22.
488. Van Baars, S. 1995, Discrete element analysis of granular materials. Communications on Hydraulic and Geotechnical Engineering, Report 95-4, Delft University of Technology, Faculty of Civil Engineering, and HERON, 41(1996), 139.
489. RILEM TC-90FMA 1990, Round-robin analysis of anchor bolts - Invitation, Mater. Struct. (RILEM). 23(133), 78.
490. Dragosavić, M. and Groeneveld, H. 1988, Concrete mechanics - Local bond, part I: Physical behaviour and constitutive consequences, and Part II: Experimental research, Research Report BI-87-18/I9, TNO Building and Construction Research, Rijswijk, The Netherlands.
491. Dragosavić, M. and Groeneveld, H. 1984, Bond model for concrete structures, in Computer Aided Analysis and Design of Concrete Structures, Damjanić, F. et al., Eds., Split, Pineridge Press, Swansea, 203.
492. Tepfers, R. 1979, Cracking of concrete cover along anchored deformed reinforcing bars, Mag. of Cone. Res., 31, 3.
493. Ingraffea, A.R. Gerstle, W.H., Gergely, P. and Saouma, V.E. 1984, Fracture mechanics of bond in reinforced concrete, J. Struct. Eng. (ASCE), 110, 871.
494. Rots, J.G. 1992, Simulation of bond and anchorage: usefulness of softening fracture mechanics, in Applications of Fracture Mechanics to Reinforced Concrete, Carpinteri, A” Ed., Elsevier Applied Science Publishers, London/New York, Chap. 11.
495. Mazars, J., Pijaudier-Cabot, G. and Clement, J.L. 1992, Analysis of steel-concrete bond with damage mechanics: Non-linear behaviour and size effect, in Applications of Fracture Mechanics to Reinforced Concrete, Carpinteri, A., Ed., Elsevier Applied Science Publishers, London/New York, Chap. 12.
496. Vos, E. 1983, Influence of loading rate and radial pressure on bond in reinforced concrete. A numerical and experimental approach, Ph.D. thesis. Delft University of Technology, The Netherlands.
497. Van Mier, J.G.M. and Vervuurt, A. 1995, Lattice model for analysing steel-concrete interface behaviour, in Mechanics of Geomaterials Interfaces, Selvadurai, A.P.S. and Boulon, M.J., Eds., Elsevier Science Publishers, Amsterdam, 201.
498. Goto, Y. 1971, Cracks formed in concrete around deformed tension bars, J. Am. Cone. Inst., 68, 244.
499. Otsuka, K. 1989, X-ray Technique with contrast medium to detect fine cracks in reinforced concrete, in Fracture Toughness and Fracture Energy - Test Methods for Concrete and Rock, Mihashi, H., Takahashi, H. and Wittmann, F.H., Eds., Balkema, Rotterdam, 521.
500. Eligehausen, R. 1989, Anchorage to concrete, in Fracture Mechanics of Concrete Structures - From Theory to Applications, Elfgren, L., Ed., Chapman & Hall/E&FN Spon, London/New York, Chapt. 13.
501. Elfgren, L. 1992, Round robin analysis and tests of anchor bolts, in Proceedings FraMCoS-1 Fracture Mechanics of Concrete Structures, Bažant, Z.P., Ed., Elsevier Applied Science, London/New York, 865.
502. RILEM TC90-FMA 1991, Round robin analysis and tests of anchor bolts in fracture mechanics of concrete, Report, Elfgren, L., Ed., Division of Structural Engineering, Luleå University of Technology, Sweden.
503. Wang, J” Navi, P. and Huet, C. 1993, Finite element analysis of anchor bolt pull-out based on fracture mechanics, in Fracture and Damage of Concrete and Rock - FDCR2, Rossmanith, H.P., Ed., Chapman & Hall/E&FN Spon, London/New York, 559.
504. Feenstra, P.H., Rots, J.G. and De Borst, R. 1990, Round robin analysis of anchor bolts, Report 25.2-90-5-07, Delft University of Technology, Delft, The Netherlands.
505. Červenka, V., Pukl, R. and Eligehausen, R. 1991, Fracture analysis of concrete plane-stress pull-out tests, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Chapman & Hall/E&FN Spon, London/New York, 899.
506. Ožbolt, J. and Eligehausen, R. 1993, Fastening elements in concrete structures - Numerical simulations, in Fracture and Damage of Concrete and Rock - FDCR2, Rossmanith, H.P., Ed., Chapman & Hall/E&FN Spon, London/New York, 527.
507. Helbling, A., Alvaredo, A.M. and Wittman F.H. 1991, Round-robin tests of anchor bolts, in RILEM TC-90 EM A Fracture Mechanics of Concrete - Applications, L. Elfgren, Ed., Luleå University of Technology, Sweden, 8:1.
508. Vervuurt, A., Schlangen, E. and Van Mier, J.G.M. 1993, A numerical and experimental analysis of the pull-out behaviour of steel anchors embedded in concrete. Report 255-93-1IVFI, Delft University of Technology, The Netherlands.
509. Vervuurt, A., Van Mier, J.G.M. and Schlangen, E. 1994, Analyses of anchor pull-out in concrete, Mater. Struct. (RILEM), 27(169), 251.
510. Feenstra, P.H. 1993, Computational aspects of biaxial stress in plain and reinforced concrete, Ph.D. thesis, Delft University of Technology, Delft, The Netherlands.
511. Rossi, P. and Wu, X. 1993, A probabilistic model for material behaviour analysis and appraisal of the structure of concrete, in Numerical Models in Fracture Mechanics of Concrete, Wittmann, F.H. Ed., Balkema, Rotterdam, 207. (HFL 150.-)
512. Carpinteri, A. 1991, Fracture mechanics approach to reinforced concrete design, in Fracture Processes in Concrete, Rock and Ceramics, Van Mier, J.G.M., Rots, J.G. and Bakker, A., Eds., E&FN Spon, London/New York, 871.
513. Elfgren, L., Ed. 1989, Fracture Mechanics of Concrete Structures, Chapman & Hall/E&FN Spon, London/New York, page 399.
514. Naaman, A.E., Otter, D. and Najm, H. 1991, Elastic Modulus in Tension and Compression, ACI Mater. J., 88, 603.
515. f in the New Material Fibres Reinforced Concrete, in Fracture Toughness and Fracture Energy, Mihashi, H., Takahashi, H. and Wittmann, F.H., eds., Balkema, Rotterdam, 73.