Influence of gas velocity on particulate fouling of exhaust gas recirculation coolers

International Journal of Heat and Mass Transfer

Volumn 54, Issue 4, 2011, Pages 838-846

  Abd Elhady, M S ^a   Zornek, T ^b   Malayeri, M R ^b   Balestrino, S ^c   Szymkowicz, P G ^c   Muller Steinhagen H ^b,d  

^a BENI SUEF UNIVERSITY   (Egypt)

^b UNIVERSITY OF STUTTGART   (Germany)

^c GENERAL MOTORS CORPORATION   (United States)

^d GERMAN AEROSPACE CENTER DLR   (Germany)

Author keywords

Combustion engine; EGR; Nano particles; Particulate fouling; Soot

Indexed keywords

AVERAGE DIAMETER; COMBUSTION ENGINES; CRITICAL FLOW VELOCITY; EGR; EXHAUST GAS RECIRCULATION; EXHAUST SYSTEMS; EXPERIMENTAL SETUP; FOULING LAYERS; FOULING RATE; GAS FLOWS; GAS VELOCITY; GAS-FLOW VELOCITY; PARTICULATE FOULING; PRESENCE OF WATER; SOOT PARTICLES; STANDARD DEVIATION; THERMAL PERFORMANCE; THERMAL RESISTANCE;

COMBUSTION; COOLING SYSTEMS; DIESEL ENGINES; EXHAUST SYSTEMS (ENGINE); FLOW OF GASES; FLOW VELOCITY; GASES; MIXED CONVECTION; NANOPARTICLES; SOOT; VELOCITY; WATER INJECTION;

FOULING;

EID: 78649967337     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2010.10.019     Document Type: Article

References (43)

1. Y. Kakoi, Y. Tsutsui, N. Ono, K. Umezawa, N. Kondo, Emission reduction technologies applied to high-speed direct injection diesel engine, Society of Automotive Engineers Technical Paper Series (1988) No. 980173.
2. W. Park, S. Choi, S. Chung, J. Ha, J., A study on exhaust characteristics in HIDI diesel engine applied EGR cooler, Proceedings of KSAE 2003 Fall Conference (2003) 393-397.
3. B. Moon, Y. Oh, S. Oh, K. Kang, and K. Ahn A study on heavy-duty diesel engine performance with CR-DPF and cooled-EGR Trans. Korean Soc. Automot. Eng. 14 3 2006 75 80
4. M. Kowada, K. Hayashi, K. Shouyama, Y. Ihara, H. Sugihara, Hino's advanced low-emission technologies developed to meet stringent emissions standards, Society of Automotive Engineers Technical Paper Series (2006) No. 2006-01-0275.
5. T.L. Mckinley, Modeling sulfuric acid condensation in diesel engine EGR coolers, Society of Automotive Engineers Technical Paper Series (1997) No. 970636.
6. J. Lim, B. Kang, J. Park, Y. Yeom, S. Chung, J. Ha, A study on the effects of EGR temperature on emission characteristics in a HSDI diesel engine using EGR cooler, Proceedings of KSAE 2004 Fall Conference (2004) 306-312.
7. K. Santoh, L. Zhang, H. Hatanaka, T. Takatsuki, and K. Yokoto Relationship between NOx and PM emissions from DI diesel engine with EGR Jpn. SAE 18 1997 369 375
8. x control in heavy-duty diesel engines - What is the limit?, Society of Automotive Engineers Technical Paper Series (1998) No.980174.
9. M. Lapuerta, J.J. Hernandez, and F. Gimenez Evaluation of exhaust gas recirculation as a technique for reducing diesel engine NOx emissions P. I. Mech. Eng. Part D. 214 2000 85 93
10. G.F. Hewitt, G.L. Shires, and T.R. Bott Process Heat Transfer 1994 Begell House New York
11. J.M. Chenoweth Final report of the HTRI/TEMA joint committee to review the fouling section of the TEMA standards Heat Transfer Eng. 11 1990 73 107
12. H.M. Kim, S.K. Park, K.S. Choi, H.M. Wang, D.H. Lee, D.K. Lee, Y.S. Cha, J.S. Lee, and J. Lee Investigation on the flow and heat transfer characteristics of diesel engine EGR coolers Int. J. Automot. Technol. 9 2 2008 149 153
13. R. Zhan, S.T. Eakle, J.W. Miller, J.W. Anthony, EGR system fouling control, Society of Automotive Engineers Technical Paper Series (2008) No. 2008-01-0066.
14. R. Zhang, F. Charles, D. Ewing, J.S. Chang, J.S. Cotton, Effect of diesel soot deposition on the performance of exhaust gas recirculation cooling devices, Society of Automotive Engineers Technical Paper Series (2004) No. 2004-01-0122.
15. J.M. Grillot, and G. Icart Fouling of a cylindrical probe and a finned tube bundle in a diesel exhaust environment Exp. Therm. Fluid Sci. 14 4 1997 442 454
16. Y. Bravo, F. Moreno, O. Longo, Improved characterization of fouling in cooled EGR systems, Society of Automotive Engineers Technical Paper Series (2007) No. 2007-01-1257.
17. F.J. Cabrejos, and G.F. Klinzing Incipient motion of solid particles in horizontal pneumatic conveying Powder Technol. 72 1992 51 61
18. B.T. Werner, and P.K. Haff The impact process in Aeolian saltation: two-dimensional simulations Sedimentology 35 1988 189 196
19. H. Müller-Steinhagen, F. Reif, N. Epstein, and A.P. Watkinson Influence of operating conditions on particulate fouling Can. J. Chem. Eng. 66 1988 42 50
20. M.S. Abd-Elhady, C.C.M. Rindt, J.G. Wijers, A.A. van Steenhoven, E.A. Bramer, and T.H. van der Meer Minimum gas velocity in heat exchangers to avoid particulate fouling Int. J. Heat Mass Transfer 47 17-18 2004 3943 3955
21. C. Wahl, V. Krüger, M. Aigner, Apparatus and method for the controlled production of nano-soot-particles, Deutsches Zentrum für Luft- und Raumfahrt, US Patent 7,371,065 B2, 2008.
22. D.B. Kittelson, W.F. Watts, J.P. Johnson, C. Rowntree, M. Payne, S. Goodier, C. Warrens, H. Preston, U. Zink, M. Ortiz, C. Goersmann, M.V. Twigg, A.P. Walker, and R. Caldow On-road evaluation of two diesel exhaust after treatment devices J. Aerosol Sci. 37 9 2006 1140 1151
23. M. Wentzel, H. Gorzawski, K.H. Naumann, H. Saathoff, and S. Weinbruch Transmission electron microscopical and aerosol dynamical characterization of soot aerosols J. Aerosol Sci. 34 10 2003 1347 1370
24. K. Park, D.B. Kittelson, and P.H. McMurry Structural properties of diesel exhaust particles measured by transmission electron microscopy (TEM): relationships to particle mass and mobility Aerosol Sci. Technol. 38 9 2004 881 889
25. M. Lapuerta, F.J. Martos, and J.M. Herreros Effect of engine operating conditions on the size of primary particles composing diesel soot agglomerates J. Aerosol Sci. 38 2007 455 466
26. H.E. Saleh Effect of exhaust gas recirculation on diesel engine nitrogen oxide reduction operating with jojoba methyl ester Renewable Energy 34 2009 2178 2186
27. R. Bosch Bosch Automotive Handbook seventh ed. 2007 van Wiley & Sons Berlin
28. W.M. Kays, and A.L. London Compact heat exchangers Third edition. 1984 McGraw-Hill, Inc
29. M. Zheng, G.T. Reader, and J.G. Hawley Diesel engine exhaust gas recirculation-a review on advanced and novel concepts Energ. Convers. Manage. 45 6 2004 883 900
30. M.S. Abd-Elhady, C.C.M. Rindt, J.G. Wijers, and A.A. van Steenhoven Influence of sintering on the growth rate of fouling layers Int. J. Heat Mass Transfer 50 1-2 2007 196 207
31. K.L. Johnson, K. Kendall, and A.D. Roberts Surface energy and the contact of elastic solids Proc. R. Soc. A 324 1971 301 313
32. M.M. Sharma, H. Chamoun, D. Sarma, and R.S. Schechter Factors controlling the hydrodynamic detachment of particles from surfaces J. Colloid Interface Sci. 149 1992 121 134
33. M.A. Hubbe Theory of detachment of colloidal particles from flat surfaces exposed to flow Colloid. Surface. 12 1984 151 178
34. M.S. Abd-Elhady, Gas-side particulate fouling in biomass gasifiers, PhD thesis, Eindhoven University of Technology, The Netherlands 2005.
35. F. Zhang, A.A. Busnaina, M.A. Fury, and S.Q. Wang The removal of deformed submicron particles from silicon wafers by spin rinse and megasonics J. Electron. Mater. 29 2000 199 204
36. N. Epstein Elements of particle deposition onto non-porous solid surfaces parallel to suspension flows Exp. Therm. Fluid Sci. 14 1997 323 334
37. M.S. Abd-Elhady, C.C.M. Rindt, J.G. Wijers, A.A. van Steenhoven, Removal of particles from powdery fouled surfaces, in the 12th International Heat Transfer Conference; Editors: J. Taine, Grenoble, France 2 (2002) 687-692.
38. A. Bejan Heat Transfer 1993 John Wiley and Sons Inc. New York
39. A.R. Chughtai, J.A. Jassim, J.H. Peterson, D.H. Stedham, and D.M. Smith Spectroscopic and solubility characteristics of oxidized soots Aerosol Sci. Technol. 15 2 1991 112 126
40. E. Weingartner, H. Burtscher, and U. Baltensperger Hygroscopic properties of carbon and diesel soot particles Atmos. Environ. 31 15 1997 2311 2327
41. Y.A. Cengel, and M.A. Boles Thermodynamics: an Engineering Approach sixth ed. 2008 McGraw Hill
42. G.F. Hewitt Handbook of Heat Exchanger Design 1992 Begell House Inc. (Chapter 2.6.2)
43. J.S. Halow Incipient rolling, sliding and suspension of particles in horizontal and inclined turbulent flow Chem. Eng. Sci. 28 1973 1 12