Numerical simulation of residual stress relaxation around a cold-expanded fastener hole under longitudinal cyclic loading using different kinematic hardening models

Fatigue and Fracture of Engineering Materials and Structures

Volumn 33, Issue 11, 2010, Pages 740-751

  Chakherlou, T N ^a   Yaghoobi, A ^a  

^a UNIVERSITY OF TABRIZ   (Iran)

Author keywords

Cold expansion; Fastener hole; Finite element simulation; Residual stress relaxation

Indexed keywords

BENEFICIAL EFFECTS; COLD EXPANSION; COMPRESSIVE RESIDUAL STRESS; CYCLIC LOADINGS; FASTENER HOLE; FASTENER HOLES; FATIGUE LIFE; FE ANALYSIS; FINITE ELEMENT MODELS; FINITE ELEMENT SIMULATIONS; KINEMATIC HARDENING MODEL; NONLINEAR KINEMATIC HARDENING; NUMERICAL SIMULATION; NUMERICAL STUDIES; RESIDUAL STRESS DISTRIBUTIONS; STRESS/STRAIN;

COMPUTER SIMULATION; CYCLIC LOADS; EXPANSION; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; HARDENING; KINEMATICS; LOADING; LOCKS (FASTENERS); STRESS ANALYSIS; STRESS CONCENTRATION; STRESS RELAXATION;

RESIDUAL STRESSES;

EID: 78649701307     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2010.01485.x     Document Type: Article

References (44)

1. Chakherlou, T. N. and Vogwell, J. (2003) The effect of cold expansion on improving the fatigue life of fastener holes. Eng. Fail. Anal. 10, 13-24.
2. Chakherlou, T. N. and Vogwell, J. (2004) A novel method of cold expansion which creates near-uniform compressive tangential residual stress around a fastener. Fatigue Fract. Eng. Mater. Struct. 27, 343-351.
3. Sohel Rana, M., Makabe, C. and Fujiwara, G. (2009) The effect of hole shape on the extent of fatigue life improvement by cold expansion. Eng. Fail. Anal. 16, 2081-2090.
4. Aghdam, A. B., Chakherlou, T. N. and Saeedi, K. (2010) An FE analysis for assessing the effect of short-term exposure to elevated temperature on residual stresses around cold expanded fastener holes in aluminum alloy 7075-T6, 31, 500-507.
5. Vogwell, J., Chakherlou, T. N. and Minguez, J. M. (2001) The effect of cold expansion on fatigue resistance of fastener holes. Advances in Fracture Research. ICF10, Proc. 10th International Conference on Fracture. Honolulu. Hawaii. Paper 22.
6. Chakherlou, T. N. and Aghdam, A. B. (2008) An experimental investigation on the effect of short time exposure to elevated temperature on fatigue life of cold expanded fastener holes. Mater. Des. 29, 1504-1511.
7. Chakherlou, T. N., Aghdam, A. B., Akbari, A. and Saeedi, K. (2010) Analysis of cold expanded fastener holes subjected to short time creep: finite element modelling and fatigue tests. Mater. Des., in press, doi:10.1016/j. matdes.2009.12.047.
8. Lacarac, V. D., Smith, D. J. and Pavier, M. J. (2001) The effect of cold expansion on fatigue crack growth from open holes at room and high temperature. Int. J. Fatigue 23, S161-S170.
9. Zhang, X. and Wang, Z. (2003) Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique. Int. J. Fatigue 25, 1249-1257.
10. Chakherlou, T. N., Oskouei, R. H. and Vogwell, J. (2008) Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates. Eng. Fail. Anal. 15, 563-574.
11. Oskouei, R. H. and Chakherlou, T. N. (2009) Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates. Aerosp. Sci. Technol. 13, 325-330.
12. Minguez, J. M. and Vogwell, J. (2006) Effect of torque tightening on the fatigue strength of bolted joints. Eng. Fail. Anal. 13, 1410-1421.
13. Chakherlou, T. N., Abazadeh, B. and Vogwell, J. (2009) The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks. Eng. Fail. Anal. 16, 242-253.
14. Sen, S. and Aksakal, B. (2004) Stress analysis of interference fitted shaft-hub system under transient heat transfer conditions. Mater. Des. 25, 407-417.
15. Chakherlou, T. N., Mirzajanzadeh, M. and Vogwell, J. (2009) Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints. Eng. Fail. Anal. 16, 2066-2080.
16. Chakherlou, T. N., Mirzajanzadeh, M. and Vogwell, J. (2009) Effect of hole lubrication on the fretting fatigue life of double shear lap joints: an experimental and numerical study. Eng. Fail. Anal. 16, 2388-2399.
17. Ball, D. L. and Lowry, D. R. (1998) Experimental investigation on the effects of cold expansion of fastener holes. Fatigue Fract. Eng. Mater. Struct. 21, 17-34.
18. Garcia-Granada, A. A., Pavier, M. J. and Smith, D. J. (2000) A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses. INT. J. Mech. Sci. 42, 1027-47.
19. Ozdemir, A. T. and Edwards, L. (1997) Relaxation of residual stresses at cold worked fastener holes due to fatigue loading. Fatigue Fract. Eng. Mater. Struct. 20, 1443-51.
20. Ozdemir, A. T. and Edwards, L. (2004) Through-thickness residual stress distribution after the Cold expansion of fastener holes and its effect on fracturing. J. Eng. Mater. Technol. 126, 129-135.
21. Stefanescu, D., Steuwer, A., Owen, R. A. O., Nadri, B., Edwards, L., Fitzpatrick, M. E. and Withers, P. J. (2004) Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. J. Strain Anal. 39, 459-469.
22. Kang, J., Johnson,W. S. and Clark, D. A. (2002) Three dimensional finite element analysis of the cold expansion of fastener holes in two aluminum alloys, J. Eng. Mater. Technol. 124, 140-145.
23. Kim, C., Kim, D. J., Seok, C. S. and Yang,W. H. (2004) Finite element analysis of the residual stress by cold expansion method under the influence of adjacent holes. J. Mat. Process. Tech. 153-154, 986-991.
24. Ismonov, S., Daniewicz, S. R., Newman Jr, J. C., Hill, M. R. and Urban, M. R. (2009) Three dimensional finite element analysis of a split-sleeve cold expansion process. J. Eng. Mater. Technol. 131, 031007-1-031007-8.
25. Maximov, J. T., Duncheva, G. V. and Mitev, I. N. (2008) Modeling of residual stress relaxation around cold expanded holes in carbon steel. J. Constr. Steel Res. 65, 909-917.
26. Hanagarth, H., Vöhringer, O. and Macherauch, E. (1990) Relaxation of shot peening residual stresses of the steel 42 CrMo 4 by tensile or compressive deformation. Proceedings of the Fourth International Conference on Shot Peening (Edited by K. Iida), The Japan Society of Precision Engineering, Tokyo, Japan, pp. 337-345.
27. Vöhringer, O. (1987) Relaxation of residual stresses by annealing or mechanical treatment. Advances in Surface Treatments, Pergamon, Oxford, 4, 367-396.
28. Kodama, S. (1972) The behaviour of residual stress during fatigue stress cycles. Proceedings of the Second International Conference on Mechanical Behavior of Metals, Society of Material Science, Kyoto, Japan, 2, pp. 111-118.
29. Jhansale, H. R. and Topper, T. H. (1973) Engineering analysis of the inelastic stress response of a structural metal under variable cyclic strains. In: Cyclic Stress-Strain Behavior- Analysis, Experimentation, and Failure Prediction, American Society for Testing and Materials,West Conshohocken, PA, pp. 246-270.
30. Wallace,W. P. and Frankel, J. P. (1949) Relief of residual stresses by single fatigue cycle. Weld. J. 38, 565-574.
31. Zhuang,W. Z. and Halford, G. R. (2001) Investigation of residual stress relaxation under cyclic load. Int. J. Fatigue 23, S31-S37.
32. James, M. R. (1982) The relaxation of residual stresses during fatigue. In: Residual Stress und Stress Relaxation (Edited by E. Kula and V.Weiss), Plenum Press, London, pp. 297-314.
33. Morrow, J. and Sinclair, G. M. (1958) Cyclic-dependent stress relaxation. In: Symposium on basic Mechanisms of Fatigue, ASTM STP 237. American Society for Testing and Materials, ASTM International, 100 Barr harbor Prive, PO Box C700, West Conshohocken, PA, 19428-2959 USA.
34. Yaghoobi, A. (2009) Finite Element Analysis of Pressure Vessels and Fastener Holes in Elastic-Plastic Region using Radial Return Algorithm. Msc Thesis supervised by Chakherlou T. N., University of Tabriz, Tabriz, Iran.
35. Rahman, S. M., Hassan, T. and Corona, E. (2008) Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure. Int. J. Plast. 24, 1756-1791.
36. Chaboche, J. L. (1991) On some modification of kinematic hardening to improve the description of ratcheting effects. Int. J. Plast. 7, 661-678.
37. Ohno, N. and Wang, J. D. (1993) Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior. Int. J. Plast. 9, 375-390.
38. Bari, S. and Hassan, T. (2002) An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int. J. Plast. 18, 873-894.
39. Chen, X. and Jiao, R. (2003) Modified kinematic hardening rule for multiaxial ratcheting prediction. Int. J. Plast. 20, 871-898.
40. Armstrong, P. J. and Frederick, C. O. (1966) A Mathematical Representation of the Multiaxial Bauscinger Effect. CEGB Report No. RD/B/N 731, Northampton, UK.
41. Chaboche, J. L. (1986) Time-independent constitutive theories for cyclic plasticity. Int. J. Plast. 2, 149-188.
42. Hu,W., Wang, C. H. and Barter, S. (1999) Analysis of Cyclic Mean Stress Relaxation and Strain Ratcheting Behavior of Aluminum 7050. Airframes and Engines Division Aeronautical and Maritime Research Laboratory, 506 Lorimer St, Fishermen's Bend, Victoria, Australia, June 1999.
43. Broek, D. (1984) Elementary Engineering Fracture Mechanics, Martinus Nijhoff Publisher, Hingham, MA02043, USA, pp. 91-113.
44. Dowling, N. E. (1993) Mechanical Behavior of Materials, Prentice-Hall International, INC Englewood Cliffs, New Jersey, USA, pp. 32-44, 355-360.