Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique

Journal of Strain Analysis for Engineering Design

Volumn 39, Issue 5, 2004, Pages 459-469

  Stefanescu, D ^a,b   Steuwer, A ^b   Owen, R A ^b,c   Nadri, B ^b   Edwards, L ^a   Fitzpatrick, M E ^a   Withers, P J ^b  

^a OPEN UNIVERSITY   (United Kingdom)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

^c UNIVERSITY OF LEICESTER   (United Kingdom)

Author keywords

Cold expanded hole; Fatigue cracking; Residual strain; Synchrotron X ray diffraction

Indexed keywords

CRACK PROPAGATION; ELASTIC MODULI; NEUTRON DIFFRACTION; RESIDUAL STRESSES; STRESS ANALYSIS; SYNCHROTRONS; TENSILE STRESS; X RAY DIFFRACTION;

COLD-EXPANDED HOLE; FATIGUE CRACKING; RESIDUAL STRAIN; SYNCHROTRON X-RAY DIFFRACTION;

STRAIN;

EID: 5444248686     PISSN: 03093247     EISSN: None     Source Type: Journal    
DOI: 10.1243/0309324041896470     Document Type: Article

References (40)

1. FTI 8101C Cold Expansion of Holes Using the Standard Split Sleeve System (Cx) and Countersink Cold Expansion, 1994 (Engineering Process Specification, Fatigue Technology Inc., Seattle, Washington).
2. Ball, D. L. and Lowry, D. R. Experimental investigation on the effects of cold expansion of fastener holes. Fatigue Fracture Engng Mater. Structs, 1998, 21(1), 17-34.
3. Fitzpatrick, M. E. and Edwards, L. Fatigue crack/residual stress field interactions and their implications for damage-tolerant design. J. Mater. Engng Performance, 1998, 7(2), 190-198.
4. Withers, P. J., Preuss, M., Webster, P. J., Hughes, D. J. and Korsunsky, A. M. Residual strain measurement by synchrotron diffraction. Mater. Sci. Forum, 2002, 404-407, 1-12.
5. Edwards, L. and Wang, D. Q. Neutron diffraction determination of the complete 3D residual stress distribution surrounding a cold expanded hole. In Proceedings of the Fourth European Conference on Residual Stresses (ECSR4), Cluny en Bourgogne, France, 1996, Vol. 2, pp. 619-626.
6. Ozdemir, A. T. and Edwards, L. Measurement of the three-dimensional residual stress distribution around split-sleeve cold-expanded holes. J. Strain Analysis, 1996, 31(6), 413-421.
7. Ozdemir, A. T. and Edwards, L. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fracture Engng Mater. Structs, 1997, 20(10), 1443-1451.
8. Pavier, M. J., Poussard, C. G. and Smith, D. J. Effect of residual stress around cold worked holes on fracture under superimposed mechanical load. Engng Fracture Mechanics, 1999, 63(6), 751-773.
9. Stefanescu, D. Measurement and prediction of fatigue crack growth from cold expanded holes. Part 1: the effect of fatigue crack growth on cold expansion residual stresses. J. Strain Analysis, 2004, 39(1), 25-39.
10. Hsu, Y. C. and Forman, R. G. Elastic-plastic analysis of an infinite sheet having a circular hole under pressure. Trans. ASME, J. Appl. Mechanics, 1975, 42(2), 347-352.
11. Rich, D. L. and Impellizzeri, L. F. Fatigue analysis of cold-worked and interference fit fastener holes. In Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637, 1977, pp. 153-175 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
12. Clark, G. Modelling residual stresses and fatigue crack growth at cold-expanded fastener holes. Fatigue Fracture Engng Mater. Structs, 1991, 14(5), 579-589.
13. Guo, W. Elastic-plastic analysis of a finite sheet with a cold-worked hole. Engng Fracture Mechanics, 1993, 46(3), 465-472.
14. Ball, D. L. Elastic-plastic stress analysis of cold expanded fastener holes. Fatigue Fracture Engng Mater. Structs, 1995, 18(1), 47-63.
15. Alder, W. F. and Dupree, D. M. Stress analysis of cold worked fastener holes. Technical Report AFML-TR.-74-44, US Air Force Materials Laboratory, Wright-Patterson Air Force Base, Dayton, Ohio, USA, 1974.
16. Liu, Y. and Shen, N. J. Residual stress analysis for actual material model of autofretted tube by non-linear boundary element method. Int. J. Pressure Vessels Piping, 1991, 48(1), 21-35.
17. Poussard, C., Pavier, M. J. and Smith, D. J. Analytical and finite element predictions of residual stresses in cold worked holes. J. Strain Analysis, 1995, 30(4), 291-304.
18. Toparli, M., Ozel, A. and Aksoy, T. Effect of the residual stresses on the fatigue crack growth behaviour at fastener holes. Mater. Sci. Engng A: Structural Mater. Properties, Microstructure and Processing, 1997, A225(1-2), 196-203.
19. Leitao, Y. M. A., Aliabadi, M. H., Rooke, D. P. and Cook, R. Boundary element methods for the analysis of crack growth in the presence of residual stress fields. J. Mater. Engng Performance, 1998, 7(3), 352-360.
20. Stefanescu, D., Edwards, L. and Fitzpatrick, M. E. On the stress analysis of cold expanded fastener holes. In Proceedings of the XXIII National Conference on Solid Mechanics, 1999, pp. 167-173 ('Petroleum-Gas' University of Ploiesti, Romania).
21. Edwards, L. and Ozdemir, A. T. Measurement of the 3D residual stress distribution around aircraft fastener holes. In Proceedings of the Third International Conference on Residual Stresses (ICRS 3), Tukushima, Japan, 1991, Vol. 1, pp. 785-790.
22. Garcia-Granada, A. A., Smith, D. J. and Pavier, M. J. A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses. Int. J. Mech. Sci., 2000, 42(6), 1027-1047.
23. Withers, P. J. Use of synchrotron X-ray radiation for stress measurement. In Analysis of Residual Stress by Diffraction Using Neutron and Synchrotron Radiation (Eds M. E. Fitzpatrick and A. Lodini), 2002, pp. 170-189 (Taylor and Francis, London).
24. Almer, J. D., Cohen, J. B. and Winholtz, R. A. Effects of residual macrostresses and microstresses on fatigue crack propagation. Metall. Mater. Trans. A: Physical Metallurgy and Materials Science, 1998, 29(8), 2127-2136.
25. Wilks, M. B., Nowell, D. and Hills, D. A. The influence of residual stress on crack growth rate. In Proceedings of the Fourth International Conference on Residual Stresses (ICRS 4), 1994, pp. 1238-1244 (SEM, Bethel, Maryland).
26. Lacarac, V., Smith, D. J., Pavier, M. J. and Priest, M. Fatigue crack growth from plain and cold expanded holes in aluminium alloys. Int. J. Fatigue, 2000, 22(3), 189-203.
27. Stefanescu, D., Edwards, L. and Fitzpatrick, M. E. X-ray diffraction measurement of the residual stresses surrounding a cold expanded hole. Mater. Sci. Forum, 2002, 404-407, 185-190.
28. Ozelton, W. M. and Coyle, T. G. Fatigue life improvement by cold working fastener holes in 7050 aluminium. In Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, 1986, pp. 53-71 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
29. Stefanescu, D. Experimental study of double cold expansion of holes. J. Strain Analysis, 2003, 38(4), 1-9.
30. Bernard, M., BuiQuoc, T. and Burlat, M. Effect of re-cold-working working on fatigue life enhancement of a fastener hole. Fatigue Fracture Engng Mater. Structs, 1995, 18(7-8), 765-775.
31. Newman Jr, J. C. An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries. NASA Report TN D-6376, National Aeronautics and Space Administration, 1971.
32. Fawaz, S. A. Stress intensity factor solutions for partelliptical through cracks. Engng Fracture Mechanics, 1999, 63(2), 209-226.
33. Murakami, Y. (Editor-in-chief) Stress Intensity Factors Handbook, 1987 (Pergamon, Oxford).
34. Pell, R. A., Braver, P. W., Mann, J. Y. and Sparrow, J. G. Fatigue of thick-section cold-expanded holes with and without cracks. Fatigue Fracture Engng Mater. Structs, 1989, 12(6), 553-567.
35. Newman Jr, J. C. and Raju, I. S. Stress intensity equations for cracks in three-dimensional finite bodies subjected to tension and bending loads. In Computational Methods in Mechanics of Fracture (Ed. S. N. Atluri), 1986, Vol. 2, Ch. 9, pp. 311-334.
36. Shah, R. C. Stress intensity factors for through and part-through cracks originating at fastener holes. In Mechanics of Crack Growth, ASTM STP 590, 1976, pp. 429-459 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
37. Pefiffer, W. The role of the peak location method in X-ray stress measurement. In Proceedings of the Fourth International Conference on Residual Stresses (ICRS 4), 1994, pp. 148-155 (SEM, Bethel, Maryland).
38. Noyan, I. C. and Cohen, J. B. Residual Stress - Measurement by Diffraction and Interpretation, 1987 (Springer-Verlag, London).
39. Goodier, J. N. and Timoshenko, S. P. Theory of Elasticity, 3rd edition, 1970 (McGraw-Hill, New York and London).
40. Howland, R. C. On the stresses in the neighbourhood of a circular hole in a strip under tension. Phil. Trans. R. Soc. Lond. A, 1930, 229, 49-86.