The effect of strain-hardening on PWSCC of nickel-base alloys 600 and 690

14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors 2009

Volumn 1, Issue , 2009, Pages 220-238

  Shoji, Tetsuo ^a   Lu, Zhanpeng ^a   Yamazaki, Seiya ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY 600; ALLOY 690; ALLOY 690TT; BASE METALS; CARBIDE PRECIPITATION; CR ALLOYS; CRACK GROWTH BEHAVIOR; CRACK GROWTH RATES; EFFECT OF STRAIN; ELECTRON BACK SCATTER DIFFRACTION; ENHANCING EFFECT; GRAIN-BOUNDARY CHEMISTRY; HARDENED AREA; HARDNESS MEASUREMENT; INTERGRANULAR FRACTURE; NICKEL BASE ALLOYS; OXIDATION KINETICS; PRIMARY WATER; THEORETICAL MODELS;

AUGER ELECTRON SPECTROSCOPY; CARBIDES; CHROMIUM ALLOYS; CRACK TIPS; DEGRADATION; GRAIN BOUNDARIES; GROWTH KINETICS; HARDENING; HEAT AFFECTED ZONE; METALS; NUCLEAR ENERGY; OXIDATION; PRESSURIZED WATER REACTORS; STRESS CORROSION CRACKING; STRESSES;

ALLOYS;

EID: 78649361846     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (41)

1. P. M. SCOTT and C. BENHAMOU, An overview of Recent Obervation and Interpretation of IGSCC in Nickel Base Alloys in PWR Primary Water, Proc. 10th Int. Symp. Environmental Degradation Materials Nuclear Power Systems-Water Reactors. NACE, 2001, CDROM.
2. C. AMZALLAG and F. VAILLANT, Stress Corrosion Cracking Propagation Rates in Reactor Vessel Head Penetrations in Alloy 600, p.235, Proc. 9th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, TMS (1999),
3. R. B. REBAK and Z. SZKLARSKA SMIALOWSKA, Corros. Sci., 38, 971 (1996).
4. W. C. MOSHIER and C. M. BROWN, Corrosion, 56, 307 (2000).
5. MRP55, Materials Reliability Program (MRP) Crack Growth Rates for Evaluating Primary Water Stress Corrosion Cracking (PWSCC) of Thick-Wall Alloy 600 Materials (MRP-55NP). Revision 1, EPRI, Palo Alto, CA: 2002. Nonproprietary version(1006695-NP). (2002)
6. MRP115, Materials Reliability Program Crack Growth Rates for Evaluating Primary Water Stress Corrosion Cracking (PWSCC) of Alloy 82, 182, and 132 Welds (mrp-115), EPRI, Palo Alto, CA: 2004. Nonproprietary version (MRP-115NP, 1006696-NP). (2002).
7. P. L. ANDRESEN, M. M. MORRA, J. HICKLING, K. S. AHLUWALIA and J. A. WILSON, PWSCC of Alloys 690, 52 and 152, Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors, CDROM, CNS (2007).
8. G. A. YOUNG, N. LEWIS and D. S. MORTON, The Stress Corrosion Crack Growth Rate of Alloy 600 Heat Affected Zones Exposed to High Purity Water, Prof. Conference on Vessel Head Penetration Inspection, Cracking and Repairs. p.309, USNRC (2003).
9. S. YAMAZAKI, Z. P. LU, Y. ITO, Y. TAKEDA and T. SHOJI, Effects of Material Factors on Stress Corrosion Cracking Growth in the Heat Affected Zones of Austenitic Alloy Weldments, Asia Pacific Symp. Corrosion Nuclear Sys. Paper No. B102, JSCE (2007).
10. Windows, User manual. Texsem laboratories, inc., Utah, USA, (2002.).
11. Q.J. PENG, H. YAMAUCHI and T. SHOJI, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 34A, 1891 (2003).
12. S. MOSTOVOY, P. B. CROSLEY and E. J. RIPLING, J. Mater., 2, 661 (1967).
13. H. NAKAJIMA, T. SHOJI, M. KIKUCHI, H. NITSUMA and M. SHINDO (Editors), Detecting Acoustic Emission During Cyclic Crack Growth in Simulated BWR Environments, ASTM (1981).
14. Z. LU, T. SHOJI, Y. TAKEDA, A. KAI and Y. ITO, Corrosion, 63, 1021 (2007).
15. S. YAMAZAKI, Z. P. LU, Y. ITO, Y. TAKEDA and T. SHOJI, Corros. Sci., 50, 835 (2008).
16. M. O. SPEIDEL and R. MAGDOWSKI, Stress Corrosion Crack Growth in Alloy 600 Exposed to PWR and BWR Environments, Paper No. 222, NACE (2000).
17. T. SHOJI, S. SUZUKI and R. G. BALLINGER, Theoretical Prediction of SCC Growth Behavior-Threshold and Plateau Growth Rate., Proc. 7th Inter. Symp. Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, p.881, NACE (1995).
18. T. SHOJI, Z. P. LU, Y. TAKEDA, H. MURAKAMI and C. Y. FU, Deterministic Prediction of Stress Corrosion Crack Growth Rates in High Temperature Water by Combination of Interface Oxidation Kinetics and Crack Tip Asymptotic Field, 2008 ASME Pressure Vessels and Piping Division Conference, PVP2008-61417, ASME (2008).
19. T. SHOJI, Z. P. LU, N. K. DAS, H. MURAKAMI, Y. TAKEDA and T. ISMAIL, Modeling Stress Corrosion Crack Growth Rates Based upon the Effect of Stress/strain on Crack Tip Interface Degradation and Oxidation Reaction Kinetics, 2009 ASME Pressure Vessels and Piping Division Conference, PVP2009-77615, ASME (2009).
20. P. L. ANDRESEN and F. P. FORD, Mat. Sci. Eng. A., 103, 167 (1988).
21. S. M. BRUEMMER and L. E. THOMAS, Surface and Interface Analysis, 31, 571 (2001).
22. R. W. STAEHLE, Critical Analysis of Tight Cracks, Proc. 13th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, CDROM, CNS (2007).
23. Y. C. GAO and K. C. HWANG, Elastic-Plastic Fields in Steady Crack Growth in a Strain-hardening Material, Proc. 5th International Conference on Fracture, France, Vol.2, p669, (1981).
24. W.W. GERBERICH, D. L. DAVIDSON and M. KACZOROWSKI, J. Mech. Phys. Solids, 38, 87 (1990).
25. Y. C. GAO, X. T. ZHANG and K. C. HWANG, Int. J. Fracture, 21, 301 (1983).
26. J. W. HUTCHINSON, J. Mech. Phys. Solids, 16, 337 (1968).
27. J. R. RICE and G.F. ROSENGREN, J. Mech. Phys Solids 16 (1968), no. 1, 1-&.
28. N. BIRKS and G. H. MEIER, Introduction to High Temperature Oxidation of Metals, Edward Arnold. (1983).
29. Y. TAKEDA, T. SHOJI, M. BOJINOV, M., KINNUNEN, T. SAARIO, T. 2006, Applied Surface Science, 252, 8580 (2006).
30. J.P. FOSTER, W.H. Bamford, and R.S. PATHANIA, Alloy 600 Crack Growth Rate Stress Intensity Dependence. Proc. 11th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, pp. 156-165, ANS (2003).
31. K. NORRING, M. KONIG, and J. LAGERSTROM, Stress intensity and temperature dependence for crack growth rate in weld metal Alloy 182 in primary PWR environment, Proc. 12th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, pp. 533-539, TMS (2005).
32. S.E. ZIEMNIAK and M. HANSON, Corros. Sci., 45, 1596 (2003).
33. S.E. ZIEMNIAK and M. HANSON, Corros. Sci., 48, 498 (2006).
34. R. A. CASTELLI, P. D. PERSANS, W. STROHMAYER and V. PARKINSON, Corros. Sci., 49, 4396 (2007).
35. A. MACHET, A. GALTAYRIES, P. MARCUS, P. COMBRADE, P. JOLIVET and P. M. SCOTT, Surface and interface analysis, 34, 197 (2002).
36. A. MACHET, A. GALTAYRIES, S. ZANNA, L. KLEIN, V. MAURICE, P. JOLIVET, M. FOUCAULT, P. COMBRADE, P. M. SCOTT and P. MARCUS, Electrochim. Acta, 3957 (2004).
37. A. SEYUX, A. MACHET, A. GALTAYRIES, V. MAURICE, D. NOEL and P. MARCUS, Early Stages of Oxidation of Stainless Alloys in High Temperature Water: From Experiments to Modeling, Workshop on Detection, Avoidance, Mechanisms, Modeling, and Prediction of SCC Initiation in Water-cooled Nuclear reactor Plants, (2008).
38. A. M. LIGMARGA and D. S. WILKINSON, Acta Mater. 55, 189 (2007).
39. J.R. RICE, Mechanics Aspects of Stress Corrosion Cracking and Hdyrogen Embrittlement, Proceedings of Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys. NACE (1977).
40. U. KRUPP, Int. Mater. Rev., 50, 83 (2005).
41. N. K. DAS, K. SUZUKI, Y. TAKEDA, K. OGAWA and T. SHOJI, Corros. Sci., 50, 1701 (2008).