Modeling stress corrosion cracking growth rates based upon the effect of stress/strain on crack tip interface degradation and oxidation reaction kinetics

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

Volumn 6, Issue PART B, 2010, Pages 1081-1100

  Shoji, Tetsuo ^a   Lu, Zhanpeng ^a   Das, Nishith Kumar ^a   Murakami, Hiroyoshi ^a,b   Takeda, Yoichi ^a   Ismail, Tirtom ^a  

^a TOHOKU UNIVERSITY   (Japan)

^b Atomic Energy Society of Japan   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL EFFECT; CRACK TIP ASYMPTOTIC FIELDS; ENVIRONMENTALLY ASSISTED CRACKING; FILM DEGRADATION; INPUT PARAMETER; INTERACTION MODES; INTERFACE DEGRADATION; LIFETIME EXTENSION; LIFETIME MANAGEMENT; OXIDATION KINETICS; OXIDATION REACTIONS; PHYSICAL INTERACTIONS; QUANTITATIVE PREDICTION; SOLID-STATE OXIDATION; STRESS CORROSION CRACK; STRESS/STRAIN;

BOILERS; CAISSONS; CONTINUUM MECHANICS; CRACK TIPS; CRACKING (CHEMICAL); DEGRADATION; ELASTICITY; GROWTH KINETICS; LIGHT WATER REACTORS; OPTIMIZATION; OXIDATION; PRESSURE VESSELS; REACTION RATES; RESIDUAL STRESSES;

STRESS CORROSION CRACKING;

EID: 77952966184     PISSN: 0277027X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/PVP2009-77615     Document Type: Conference Paper

References (61)

1. Shoji T., 2003, "Progress in the Mechanistic Understanding of BWR SCC and Its Implication to the Prediction of SCC Growth Behavior in Plants", Proc. 11th Int. Symp. Environ. Degradation of Materials in Nuclear Power Systems-Water Reactors, ANS, pp. pp. 588-598. Skamania, Stevenson, Washington. (ANS, 2003). ANS.
2. Suzuki S., Kumagayi K., Shitara C., Mizutani J., Sakashita, A., Tohkuma H., Yamashita H., 2004, Maintenology, 3, pp. 65-70.
3. Scott P.M., Benhamou C., 2001, "An Overview of Recent Observation and Interpretation of IGSCC in Nickel base Alloys in PWR Primary Water", Proc. of the 10th Int. Symp. Environmental Degradation Materials Nulcear Power Systems-Water Reactors, NACE, CDROM.
4. Scott P.M. and Combrade P.. 2003, "On the Mechanism of Stress Corrosion Crack Initiation and Growth in Alloy 600 Exposed to PWR Primary Water", in Proc. of the 11th Int. Symp. Environmental Degradation Materials Nulcear Power Systems-Water Reactors. ANS.
5. NISA, Feb.05, 2008, Cracks on the Inner Surface of the Welds at Primary Water Inlet and Outlet Nozzle to Steam Generators.
6. Andresen P.L. and Ford F.P., 1988, "Life Prediction by Mechanistic Modeling and System Monitoring of Environmental Cracking of Iron and Nickel-Alloys in Aqueous Systems". Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 103(1): pp. 167-184.
7. Ford F.P., Quantitative prediction of environmentally assisted cracking. Corrosion, 1996. 52(5): p. 375-395.
8. Shoji T., Suzuki S., Ballinger R.G., 1995, "Theoretical prediction of SCC growth behavior-threshold and plateau growth rate", Proc. 7th Inter. Symp. Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, NACE, pp. 881-891.
9. Gao Y.C., K.C. Hwang. 1981. "Elastic-Plastic Fields in Steady Crack Growth in a Strain-Hardening Material", Proc. 5th International Conference on Fracture, France, Vol.2, pp. pp. 669-682, France.
10. Shoji T., Lu Z.P., and Takeda Y. 2007, "Understanding the Threshold Conditions for Stress Corrosion Cracking in Light Water Reactor Environments Based on the Deformation/Oxidation Mechanism", 2007 ASME Pressure Vessels and Piping Division Conference (ASME PVP 2007/Creep8). ASME.
11. Shoji T., Lu Z.P., Y. Takeda, Murakami H., Fu C.Y.. 2008, "Deterministic Prediction of Stress Corrosion Crack Growth Rates in High Temperature Water by Combination of Interface Oxidation Kinetics and Crack Tip Asymptotic field", ASME Pressure Vessels and Piping Division Conference (ASME PVP 2008). ASME.
12. Hall M.M., 2008. "An alternative to the Shoji crack tip strain rate equation. Corrosion Science," 50(10): pp. 2902-2905.
13. Gao Y.C., X.T. Zhang, and K.C. Hwang, 1983, "The Asymptotic near-Tip Solution for Mode-Iii Crack in Steady Growth in Power Hardening Media", International Journal of Fracture, 21(4): pp. 301-317.
14. Fan T.Y., M.A. Sutton, and L.X. Zhang, 1997, "Plane stress steady crack growth in a power-law hardening material"1. International Journal of Fracture, 86(4): p. 327-341.
15. Rice J.R., Durugan, W.J., and T.L. Sham, 1980, "Elastic-plastic analysis of growing cracks", in: Fracture Mechanics. ASTM. pp. 189-221.
16. Bruemmer S.M. and L.E. Thomas, 2001, "High-resolution analytical electron microscopy characterization of corrosion and cracking at buried interfaces", Surface and Interface Analysis. 31(7): pp. 571-581.
17. Staehle R.W. 2007, "Critical Analysis of Tight Cracks," Proc. 13th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors. CNS.
18. Vermilyea D.A. 1987, "Proc. Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys. 1977: NACE.
19. Parkins R.N., 1987, "Factors Influencing Stress-Corrosion Crack-Growth Kinetics", Corrosion, 43(3): p. 130-139.
20. Newman R.C., 1994, "Developments in the Slip-Dissolution Model of Stress-Corrosion Cracking", Corrosion, 50(9): pp. 682-686.
21. Birks N. and G.H. Meier, 1983, "Introduction to high temperature oxidation of metals". Edward Arnold.
22. Ziemniak S.E. and M. Hanson, 2002, "Corrosion behavior of 304 stainless steel in high temperature, hydrogenated water", Corrosion Science, 44: pp. 2209-2230.
23. Ziemniak S.E. and Hanson M., 2003, "Corrosion behavior of NiCrMo Alloy625 in high temperature, hydrogenated water", Corrosion Science, 45: pp. 1596-1618. (Pubitemid 36405671)
24. Ziemniak S.E. and M. Hanson, 2006, "Corrosion behavior of NiCrFe Alloy 600 in high temperature, hydrogenated water". Corrosion Science, 48: pp. 498-521.
25. Castelli R.A., et al., 2007, "Optical reflection spectroscopy of thick corrosion layers on 304 stainless stee", Corrosion Science, 49: pp. 4396-4414.
26. Machet A., Galtayries A., Marcus P., Combrade P., Jolivet P., Scott, P.M. 2002, "XPS study of oxides formed on nickel-base alloys in high-temperature and high-pressure water", Surface and interface analysis, pp. 197-200.
27. Machet A., Galtayries A., Zanna S., Klein, Maurice V., Jolivet P., Foucault M., Combrade P., Scott, P.M., Marcus P. 2004, "XPS and STM study of the growth and structure of passive films in high temperature water on a nickel-base alloy". Electrochimica Acta, pp. 3957-3964.
28. Seyeux A., Machet A., Galtayries A. Maurice V., Noel, D., 2008, "Early stages of oxidation of stainless alloys in high temperature water: from experiments to modeling", Workshop on detection, Avoidance, mechanisms, modeling, and prediction of SCC initiation in water-cooled nuclear reactor plants.
29. Proust A., et al. 2008, "Determination of the kinetics of oxidation and cation release of Ni base alloys in PWR primary coolant", Proc. Water chemistry 2008, Berlin.
30. Lu Z.P., Y. Takeda, T. Shoji, 2004, "Effects of environmental factors on the electronic properties of interfacial oxide film on 304L stainless steel in high temperature pure water". Advances in Fracture and Failure Prevention, Pts 1 and 2, 261-263: pp. 919-924.
31. Shibata T. and S. Fujimoto, 1987, "Repassivation behavior of newly created surface of pure nickel in high temperature and high pressure neutral solution." Transactions of the Japan Institute of Metals, 28(3): pp. 224-231. (Pubitemid 17582976)
32. Kinnunen P., 2002, "Electrochemical characterization and modeling of passive films on Ni- and Fe-based alloys". VTT publications 472, Espoo. p.28. (Pubitemid 35347112)
33. Belova I.V. and G.E. Murch, 2004, "The effective diffusivity in polycrystalline material in the presence of interphase boundaries", Philosophical Magazine, 84(1): pp. 17-28.
34. Dowling N.E., Mechanical behavior of materials. 1993: Prentice Hall, New Jersey. p.96.
35. Gerberich W.W., D.L. Davidson, and M. Kaczorowski, 1990. "Experimental and Theoretical Strain Distributions for Stationary and Growing Cracks", Journal of the Mechanics and Physics of Solids, 38(1): pp. 87-113.
36. Hutchinson J.W., 1968, "Plastic Stress and Strain Fields at a Crack Tip", Journal of the Mechanics and Physics of Solids, 16(5): pp. 337-342.
37. Rice J.R. and Rosengren G.F., 1968, "Plane Strain Deformation near a Crack Tip in a Power-Law Hardening Material", Journal of the Mechanics and Physics of Solids, 16(1): p. 1
38. Amazigo J.C., J.W. Hutchinson, 1977. "Crack-Tip Fields in Steady Crack-Growth with Linear Strain-Hardening", Journal of the Mechanics and Physics of Solids, 25(2): pp. 81-97.
39. Rice J.R., 1977, "Mechanics aspects of stress corrosion cracking and hdyrogen embrittlement", Proceedings of Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys". NACE.
40. Krupp U., 2005, "Dynamic embrittlement - time-dependent quasi-brittle intergranular fracture at high temperatures. International Materials Reviews", 50(2): pp. 83-97.
41. Rosler J., S. Muller, 1998, "Protection of Ni-base superalloys against stress accelerated grain boundary oxidation (SAGBO) by grain boundary chemistry modification", Scripta Materialia, 40(2): pp. 257-263.
42. Larche F.C., Cahn J.W., 1982, "The Effect of Self-Stress on Diffusion in Solids". Acta Metallurgica, 30(10): pp. 1835-1845.
43. Krafft J.M. and Mulherin J.H., 1969, "Tensile-Ligament Instability and Growth of Stress-Corrosion Cracks", 62(1): p. 64.
44. Krafft J.M. and Smith H.L.. 1977, "Ligament Instability Model for Stress Corrosion and Fatigue Crack Propagation in a 4340 Steel", Proc. Conf. Stress Corrosion and Hydrogen Embrittlement of Iron Base Alloys. 1977. Unieux-Firminy, France: NACE, Houston.
45. Carter R. and Pathania R.. 2007, "Technical Basis for BWRVIP Stainless Steel Crack Growth Correlations in BWRs". Proc. ASME PVP 2007. ASME.
46. Eason E.D., Pathania R.S., Shoji T.. 2005, "Evaluation of the Fracture Research Institute Theoretical Stress Corrosion Cracking Model", Proc. of the 12th Int. Symp. Environmental Degradation Materials Nulcear Power Systems-Water Reactors. (Pubitemid 43907507)
47. Takeda Y., Shoji T., Bojinov M., Kinnunen P., Saario T. 2006, "In situ and ex situ characterisation of oxide films formed on strained stainless steel surfaces in high-temperature water", Applied Surface Science, 252(24): pp. 8580-8588. (Pubitemid 44468268)
48. Andresen P.L., Angeliu T.M., Young L.M.. 2001, "Effect of Martensite and Hydrogen on SCC of Stainless Steels and Alloy 600", Corrosion/2001, NACE, Paper No.228.
49. Andresen P.L., Young L.M., Catlin W.R., Horn R.M., 2002, "Stress corrosion crack growth rate behavior of various grades of cold worked stainless steel in high temperature water", Corrosion'2002, NACE, Paper no. 511.
50. Shoji T., Li G.F., Kwon J.H., Matsushima S., Lu, Z.P., 2003, "Quantification of Yield Strength Effects on IGSCC of Austenitic Stainless Steels in High Temperature Waters", Proc. 11th Int. Symp. Environ. Degradation of Materials in Nuclear Power Systems-Water Reactors, ANS, pp. 834-843. Washington: ANS.
51. Itow M., Kikuchi M., Tanaka N., Kuniya J., Yamamoto M., Suzuki S., Namatame S., Futami, T., 2004, "SCC Growth Rates and Reference Curves for Low Carbon Stainless Steels in BWR Environments". ASME PVP 2004, ASME, pp. 167-173.
52. Andresen P.L., Morra M.M.. 2005, "Effects of Positive and Negative dK/da on SCC Growth Rates", in Proc. of the 12th Int. Symp. Environmental Degradation Materials Nulcear Power Systems-Water Reactors. TMS.
53. Lu Z.P., Shoji T., Takeda Y., Ito Y., Yamazaki S., Tsuchiya N., 2007, "Effects of Loading mode and temperature on stress corrosion cracking growth behavior of strain-hardened 316L stainless steels in oxygenated pure water", Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors, CNS, CDROM.
54. Lu Z.P., Shoji T., Takeda Y., Ito Y., Yamazaki S., Tsuchiya N., 2007, "Effects of Loading mode and temperature on stress corrosion cracking growth behavior of strain-hardened 316L stainless steels in oxygenated pure water", Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors, CNS, CDROM.
55. Tsubota M., Katayama Y., Saito Y., Kaneko T., 2005, "Stress Corrosion crkacing growth Behavior of Cold Worked Austenitic Stainless Steel in High Temperature Water", Proc. of the 12th Int. Symp. Environmental Degradation Materials Nuclear Power Systems-Water Reactors, TMS, pp. 167-181. (Pubitemid 43907503)
56. JNES, IGSCC project reports, 2005, 2006, 2007.
57. Ando M., Nakata K., Itow M., Tanaka, N., Koshiishi, M., Obata, R., Miwa, Y., Kaji Y., Hayakawa M., 2007, "CGR Behavior of low carbon stainless steel of hardened heat affected zone in PLR piping weld joints", Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors. CNS. CDROM.
58. Bika D., MaMcmahon. C.J., 1995. "A Model for Dynanic Embriitle". Acta Materialia, 43(5): pp. 1909-1916.
59. Shoji T., Lu, Z.P., Takeda Y., Das N.K., Ismail T. 2008, "Quantification of Mechano-chemical Interactions at Multi-scales and Theoretical Modeling of Stress Corrosion Cracking Initiation and Short Crack Growth", Workshop on detection, Avoidance, mechanisms, modeling, and prediction of SCC initiation in water-cooled nuclear reactor plants. CDROM.
60. Tirtom I., Das N. K, Suzuki K., K. Ogawa, T. Shoji, 2008, "Multiscale modeling approach to stress corrosion cracking", Proceedings of the 2008 International Congress on Advances in Nuclear Power Plants, Anaheim, California, USA, pp.2081-2089.
61. Das N. K., Suzuki K., Takeda Y., Ogawa K., Shoji, T. 2008, "Quantum chemical molecular dynamics study of stress corrosion cracking behaviour for fcc Fe and Fe-Cr surfaces", Corrosion Science, 50, pp. 1701-1706.