The mechanism of stress corrosion cracking of alloy 600 in high temperature water

Corrosion Science

Volumn 38, Issue 6, 1996, Pages 971-988

  Rebak, R B ^a   Szklarska Smialowska, Z ^a  

^a OHIO STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYS; CRACK INITIATION; CRACK PROPAGATION; CREEP; DIFFUSION IN SOLIDS; ESTIMATION; MATHEMATICAL MODELS; OXIDATION; THERMAL EFFECTS;

ALLOY 600; CRACK GROWTH RATE; DIFFUSION CONTROLLED PROCESSES; HIGH TEMPERATURE WATER; STRESS CORROSION CRACKING MECHANISMS;

STRESS CORROSION CRACKING;

ALLOYS; STRESS CORROSION CRACKING; WATER;

EID: 0030158816     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/0010-938X(96)00183-7     Document Type: Article

References (54)

1. A.R. McIlree, T. Olberg and J. Nestell, Primary side stress corrosion cracking, In Steam Generator Reference Book, Chap. 7. Electric Power Research Institute, Palo Alto, CA (1985).
2. J.P.N. Paine, T. Oldberg, R. Marlow and S. Brown, Tube intergranular attack and stress corrosion cracking on the secondary side, In Steam Generator Reference Book, Chap. 8. EPRI, Palo Alto, CA (1985).
3. D. Van Rooyen, Corrosion-NACE 31, 327 (1975).
4. Y.S. Garud and T.L. Gerber, Intergranular Stress Corrosion Cracking of Ni-Cr-Fe Alloy 600 Tubes in PWR Primary Water - Review and Assessment for Model Development, EPRI Report NP-3057 (May 1983).
5. R.H. Jones and S.M. Bruemmer, Environment-induced crack growth processes in nickel-base alloys, In Environment-Induced Cracking of Metals, Proc. 1st Int. Conf. on Environment-Induced Cracking of Metals, October 2-7, 1988, Kohler, Wisconsin. NACE, Houston, TX (1989) pp. 287-310.
6. Z. Szklarska-Smialowska, Factors influencing IGSCC of alloy 600 in primary and secondary waters of PWR steam generators, In Proc. 4th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Jekyll Island, Georgia, August 6-10, 1989. National Association of Corrosion Engineers, Houston, TX (1990) p. 6-1.
7. T.B. Cassagne, P. Combrade, M.A. Foucault and A. Gelpi, The influence of mechanical and environmental parameters on the crack growth behaviour of alloy 600 in PWR primary water, In Proc. 12th Scandinavian Corrosion Congr. & EUROCORR '92, Vol. II, Espoo, Finland, 31 May-4 June 1992. The Corrosion Society of Finland (1992) p. 55.
8. R.B. Rebak, A.R. McIlree and Z. Szklarska-Smialowska, Effects of pH and stress intensity on crack growth rate in alloy 600 in lithiated + borated water at high temperature, In Proc. 5th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Monterey, California, August 25-29, 1991. American Nuclear Society, La Grange Park (1992) p. 511.
9. R.B. Rebak and Z. Szklarska-Smialowska, Corrosion 50, 378 (1994).
10. R.G. Lott, R.J. Jacko and R.E. Gold, Primary water stress corrosion crack growth rates in alloy 600 steam generator tubing, In Proc. 5th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Monterey, California, August 25-29, 1991. American Nuclear Society, La Grange Park (1992) p. 525.
11. T. Cassagne and A. Gelpi, Crack growth rate measurement on alloy 600 steam generator tubes in steam and primary water, In Proc. 5th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Monterey, California, August 25-29, 1991. American Nuclear Society, La Grange Park (1992) p. 518.
12. T. Cassagne and A. Gelpi, Crack growth rate measurement on alloy 600 steam generator tubing in primary and hydrogenated AVT water, In Proc. 6th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, San Diego, CA, August 1-5, 1993. The Minerals, Metals and Materials Society, Warrendale, PA (1993) p. 679.
13. F.P. Ford and P.L. Andresen, Development and use of a predictive model of crack propagation in 304/316L, A533B and inconel 600/182 alloys in 288°C water, In Proc. 3rd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Traverse City, Michigan, August 30-September 3, 1987. The Metallurgical Society, Warrendale, PA (1988) p. 789.
14. P.L. Andresen, Corrosion-NACE 44, 450 (1988).
15. P.L. Andresen and F.P. Ford, Mater. Sci. Engng A103, 167 (1988).
16. P.L. Andresen, Mechanisms & modeling of water chemistry effects in inconels & stainless, low alloy & carbon steels in high temperature water, Corrosion '89, New Orleans, Louisiana, 17-21 April, 1989, Paper 566.
17. J.R. Galvele, Corros. Sci. 27, 1 (1987).
18. J.R. Galvele, Corros. Sci. 30, 955 (1990).
19. J.R. Galvele, Surface mobility mechanism of SCC, In Parkins Symp. on Fundamentals Aspects of Stress Corrosion Cracking. The Minerals, Metals and Materials Society, Warrendale, PA (1992) p. 85.
20. J.R. Rice and G.F. Rosengren, J. Mech. Phys. Solids 16, 1 (1968).
21. A. Paskin, B. Massoumzadeh, K. Shukla, K. Sieradzki and G.J. Dienes, Acta Metall. 33, 1987 (1985).
22. M.M. Hall Jr, Thermally activated dislocation creep model for primary water stress corrosion cracking of NiCrFe alloys, In Proc. of Int. Symp. on Plant Aging and Life Prediction of Corrodible Structures, Sapporo, Japan, 15-18 May, 1995, Paper A-I-09.
23. R. Bandy and D. van Rooyen, Mechanisms of intergranular failures in alloy 600 in high temperature environments, In Proc. Int. Congr. on Metallic Corrosion, Toronto, 3-7 June 1984. National Research Council of Canada, Ottawa, Canada (1984) p. 202.
24. R.B. Rebak, PhD Dissertation, The Ohio State University, 1993.
25. R.B. Rebak and Z. Szklarska-Smialowska, Corrosion 47, 754 (1991).
26. Y. Shen and P. G. Shewmon, Corrosion 47, 712 (1991).
27. D.D. Macdonald and M. Urquidi-Macdonald, Corros. Sci. 32, 51 (1991).
28. D.D. Macdonald and M. Urquidi-Macdonald, An advanced coupled environment fracture model for predicting crack growth rates. In Parkins Symp. on Fundamentals Aspects of Stress Corrosion Cracking. The Minerals, Metals and Materials Society, Warrendale, PA (1992) p. 443.
29. D.D. Macdonald, P.-C. Lu and M. Urquidi-Macdonald, Deterministic estimation of crack growth rates in Steels in LWR coolant environments, Corrosion '95, Orlando, FL, March 1995. NACE International, Houston, TX (1995) Paper 95176.
30. P.M. Scott and M. Le Calvar, Some possible mechanisms of intergranular stress corrosion cracking of alloy 600 in PWR primary water, In Proc. 6th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, San Diego, CA, 1-5 August 1993. The Minerals, Metals and Materials Society, Warrendale, PA (1993) p. 657.
31. P.G. Shewmon, Diffusion in Solids. The Minerals, Metals and Materials Society, Warrendale, PA (1989).
32. J.W. Park and C.J. Alstetter, Metall. Trans. 18A, 43 (1987).
33. R.C. Weast, CRC Handbook of Chemistry and Physics. CRC Press Inc., Boca Raton, FL (1990) p. F-25.
34. R.B. Rebak and Z. Szklarska-Smialowska, Corrosion 51, 376 (1995).
35. A.-F. Gourgues, E. Andrieu and P.M. Scott, A study of the mechanism of primary water stress corrosion cracking of alloy 600, In Proc. 7th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Breckenridge, CO, 6-10 August 1995. NACE International, Houston, TX (1995).
36. R.B. Rebak and Z. Szklarska-Smialowska, Prediction of crack growth rate in service from accelerated tests in laboratory for steam generator alloy 600 tubing, In Proc. Int. Symp. on Plant Aging and Life Prediction of Corrodible Structures, Sapporo, Japan, 15-18 May 1995, Paper A-II-15.
37. N. Totsuka and Z. Szklarska-Smialowska, Corrosion-NACE 43, 734 (1987).
38. Z. Xia, W.-K. Lai and Z. Szklarska-Smialowska, Corrosion 47, 173 (1991).
39. C.H. Shen and P.G. Shewmon, Metall. Trans. 21A, 1261 (1991).
40. T. Magnin, J.-M. Boursier, D. Noel, R. Rios and F. Vaillant, Corrosion deformation interaction during stress corrosion cracking of alloy 600 in primary water, In Proc. 6th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, San Diego, CA, 1-5 August 1993. The Minerals, Metals and Materials Society, Warrendale, PA (1993) p. 669.
41. R. Rios, T. Magnin, D. Noel and O. de Bouvier, Metall. Mater. Trans. 26A, 925 (1995).
42. R.B. Rebak, Z. Xiz and Z. Szklarska-Smialowska, Corrosion, accepted for publication (1995).
43. G.C. Wood and F.H. Stott, Mater. Sci. Technol. 3, 519 (1987).
44. D.L. Douglass, Oxidation of Metals 44, 81 (1995).
45. H.J. Grabke and I. Wolf, Mater. Sci. Engng 87, 43 (1987).
46. F.H. Stott, G. C. Wood, D.P. Whittle, B.D. Bastow, Y. Shida and A. Martinez-Villafañe, Solid State Ionics 12, 365 (1984).
47. J.M. Gras, Stress corrosion cracking of steam generator tubing materials, review and assessment, In Parkins Symp. on Fundamental Aspects of Stress Corrosion Cracking. The Minerals, Metals and Materials Society, Warrendale, PA (1992) p. 410.
48. V. Thaveeprungsriporn, T.M. Angeliu, D.J. Paraventi, J.L. Hertzberg and G.S. Was, Grain boundary deformation of Ni-Cr-Fe-C at 360°C, In Proc. 6th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, San Diego, CA, 1-5 August 1993. The Minerals, Metals and Materials Society, Warrendale, PA (1993) p. 679.
49. P.M. Anderson and J.R. Rice, Acta Metall. 33, 409 (1985).
50. M.J. Psaila-Dombrowski, PhD Dissertation, Massachusetts Institute of Technology, 1990.
51. J.R. Galvele, J. Electrochem. Soc. 123, 464 (1976).
52. Z. Szklarska-Smialowska, K.C. Chou and Z. Xia, Corros. Sci. 32, 609 (1991).
53. Computer-Calculated Potential pH Diagrams to 300°C, Volume 2, Handbook of Diagrams, EPRI NP-3137, June 1983.
54. R.N. Parkins, Br. Corros. J., 7, 15 (1972).