PWSCC of alloys 690, 52 and 152

Canadian Nuclear Society - 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems 2007

Volumn 2, Issue , 2007, Pages 1364-1392

  Andresen, Peter L ^a   Morra, Martin M ^a   Hickling, John ^b   Ahluwalia, Al ^c   Wilson, John ^d  

^a GE GLOBAL RESEARCH   (United States)

^b CMC   (Germany)

^c ELECTRIC POWER RESEARCH INSTITUTE   (United States)

^d Exelon Corporation   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY 690; CRACK-GROWTH RATES; CYCLIC LOADINGS; DEPOSITED ALLOYS; INTERGRANULAR CRACKING; INTERNATIONAL CONFERENCES; NUCLEAR POWER SYSTEMS; NUCLEAR SOCIETY; PRIMARY WATER; WELD METALS;

ALLOYS; CRACKING (CHEMICAL); DEGRADATION; ELECTRIC POWER SYSTEMS; ELECTRIC POWER TRANSMISSION NETWORKS; METALLIC COMPOUNDS; METALS; NUCLEAR ENERGY; POWER TRANSMISSION; PRESSURIZED WATER REACTORS; SULFATE MINERALS; WELDED STEEL STRUCTURES; WELDING; WELDS;

NUCLEAR FUEL REPROCESSING;

EID: 51849143159     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (27)

1. P.L. Andresen, "Perspective and Direction of Stress Corrosion Cracking in Hot Water", Proc. Tenth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, 2001.
2. P.L. Andresen, T.M. Angeliu and L.M. Young, "Immunity, Thresholds, and Other SCC Fiction", Proc. Staehle Symp. on Chemistry and Electrochemistry of Corrosion and SCC, TMS, Feb. 2001.
3. P.L. Andresen, L.M. Young, P.W. Emigh and R.M. Horn, "Stress Corrosion Crack Growth Rate Behavior of Ni Alloys 182 and 600 in High Temperature Water", Corrosion/02, Paper 02510, NACE, 2002.
4. P.L. Andresen, "Conceptual Similarities and Common Predictive Approaches for SCC in High Temperature Water Systems", Paper 96258, Corrosion/96, NACE, 1996.
5. F.P. Ford and P.L. Andresen, "Corrosion in Nuclear Systems: Environmentally Assisted Cracking in Light Water Reactors", in "Corrosion Mechanisms", Ed. P. Marcus and J. Ouder, Marcel Dekker, p.501-546, 1994.
6. P.L. Andresen and C.L. Briant, "Environmentally Assisted Cracking of Types 304L/316L/316NG Stainless Steel in 288 °C Water," Corrosion, Vol. 45, pp. 448-463, 1989.
7. P.L. Andresen, "Environmentally Assisted Growth Rate Response of Nonsensitized AISI 316 Grade Stainless Steels in High Temperature Water," Corrosion 44, 7, p. 450, 1988.
8. P.L. Andresen and J. Hickling, "PWSCC Growth Rates of Cold Worked Alloy 690", Conference on Alloy 600, Santa Ana Pueblo, NM, March 2005, EPRI, Palo Alto.
9. P.L. Andresen, "Development of Advanced Testing Techniques to Quantify the Improved PWSCC Resistance of Alloy 690 and its Weld Metals (MRP-123)", EPRI, Palo Alto, CA, 2004. Technical Report 1010269.
10. P.L. Andresen and M.M. Morra, Materials Reliability Program: Resistance of Alloy 690/52/152 to SCC Crack Growth in Simulated PWR Primary Water (MRP-196), EPRI, Palo Alto, CA, 2006, Technical Report 1013516.
11. P.L. Andresen and C.L. Briant, "Environmentally Assisted Cracking of Types 304L/316L/316NG Stainless Steel in 288 °C Water," Corrosion, Vol. 45, pp. 448-463, 1989.
12. rd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, AIME, pp. 371-382, 1988.
13. P.L. Andresen, "Environmentally Assisted Growth Rate Response of Nonsensitized AISI 316 Grade Stainless Steels in High Temperature Water," Corrosion 44, 7, p. 450, 1988.
14. P.L. Andresen, "The Effects of Aqueous Impurities on Intergranular Stress Corrosion Cracking of Sensitized Type 304 Stainless Steel," Final Report NP3384 Contract Tl 15-3, EPRI, 1983. See also, "Innovations in Experimental Techniques for Testing in High Temperature Aqueous Environments," Report No. 81CRD088, GE CRD, Schenectady, New York, 1981.
15. L.W. Niedrach, "A New Membrane Type pH Sensor for Use in High Temperature High Pressure Water", J. Electrochem. Soc. 127, p. 2122, 1980.
16. th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, AIME, 1999.
17. T.M. Angeliu, P.L. Andresen, E. Hall, J.A. Sutliff, S. Sitzman, "Strain and Microstructure Characterization of Austenitic Stainless Steel Weld HAZs", Corrosion/2000, Paper 00186, NACE, 2000.
18. J.A. Sutliff, "An Investigation of Plastic Strain in Copper by Automated-EBSP", Microscopy and Microanalysis, Vol 5. Supp. 2 1999 p. 236 (Proceedings: Microscopy & Microanalysis '99).
19. th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, ANS, 2003.
20. th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems, ANS, 2003.
21. 2", EPRI Alloy 600 Conference, Atlanta, June 2007.
22. D.S. Morton, S.A. Attanasio, J.S. Fish, and M.K. Schurman, "Influence of Dissolved Hydrogen on Nickel Alloy SCC in High Temperature Water", Corrosion/99, Paper 99447, NACE, 1999.
23. D.S. Morton, S.A. Attanasio, G.A. Young, P.L. Andresen, and T.M. Angeliu, "The Influence of Dissolved Hydrogen on Nickel Alloy SCC: A Window to Fundamental Insight", Paper 01117, Corrosion/01, NACE, 2001.
24. D.S. Morton, S.A. Attanasio and G.A. Young, "Primary Water SCC Understanding and Characterization Through Fundamental Testing in the Vicinity of the Ni/NiO Phase Transition", Proc. 10th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, 2002.
25. P.L. Andresen and M.M. Morra, "Effects of Positive and Negative dK/da on SCC Growth Rates", Proc. 12th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors", TMS, Snowbird, August 2005.
26. Proc. Workshop on Cold Work in Iron- and Nickel-Base Alloys, Ed. R. W. Staehle and J. Gorman, Toronto, June 2007, EPRI, Palo Alto.
27. D.J. Paraventi and W.C. Moshier, "Alloy 690 SCC Growth Rate Testing", Proc. Workshop on Cold Work in Iron- and Nickel-Base Alloys, Ed. R. W. Staehle and J. Gorman, Toronto, June 2007, EPRI, Palo Alto.