Marginal adaptation of an etch-and-rinse adhesive with a new type of solvent in class II cavities after artificial aging

Clinical Oral Investigations

Volumn 14, Issue 6, 2010, Pages 699-705

  Manhart, Juergen ^a   Trumm, Cordula ^b  

^a UNIVERSITY OF MUNICH   (Germany)

^b Private Practice   (Germany)

Author keywords

Class II restorations; Composite; Dentin adhesives; Marginal adaptation; Solvent

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; CERAMX; DENTIN BONDING AGENT; FILTEK Z250; OPTIBOND SOLO PLUS; POLYMETHACRYLIC ACID DERIVATIVE; PRIME AND BOND NT; RESIN; RESIN CEMENT; SOLVENT; SYNTAC DENTINE ADHESIVE; TERT BUTYL ALCOHOL; TETRIC EVOCERAM; WATER; XP BOND; XP-BOND;

ARTICLE; CHEMISTRY; CLASSIFICATION; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL BONDING; DENTAL SURGERY; DENTIN; ENAMEL; ENDODONTICS; HISTOLOGY; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; RANDOMIZED CONTROLLED TRIAL; SCANNING ELECTRON MICROSCOPY; SCOTCHBOND; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH BRUSHING; ULTRASTRUCTURE;

COMPOSITE RESINS; DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTAL ENAMEL; DENTAL MARGINAL ADAPTATION; DENTAL MATERIALS; DENTAL POLISHING; DENTAL RESTORATION, PERMANENT; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POLYMETHACRYLIC ACIDS; REPLICA TECHNIQUES; RESIN CEMENTS; SOLVENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TERT-BUTYL ALCOHOL; TIME FACTORS; WATER;

EID: 78449236408     PISSN: 14326981     EISSN: 14363771     Source Type: Journal    
DOI: 10.1007/s00784-009-0353-6     Document Type: Article

References (50)

1. Dietrich T, Lösche AC, Lösche GM, Roulet JF (1999) Marginal adaptation of direct composite and sandwich restorations in class II cavities with cervical margins in dentine. J Dent 27: 119-128.
2. Manhart J, Hollwich B, Mehl A, Kunzelmann KH, Hickel R (1999) Randqualität von Ormocer- und Kompositfüllungen in Klasse-II-Kavitäten nach künstlicher Alterung. Dtsch Zahnärztl Z 54: 89-95.
3. Mayer R (1991) Ästhetisch-adhäsive Füllungstherapie im Seitenzahngebiet-eine Illusion? Dtsch Zahnärztl Z 46: 468-470.
4. Dietschi D, Scampa U, Campanile G, Holz J (1995) Marginal adaptation and seal of direct and indirect class II composite resin restorations: an in vitro evaluation. Quintessence Int 26: 127-138.
5. Lutz F, Kull M (1980) The development of a posterior tooth composite system, in-vitro investigation. Schweiz Monatsschr Zahnmed 90: 455-483.
6. Owens BM, Johnson WW, Harris EF (2006) Marginal permeability of self-etch and total-etch adhesive systems. Oper Dent 31: 60-67.
7. van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, van Landuyt K, Lambrechts P, Vanherle G (2003) Adhesion to enamel and dentin: current status and future challenges. Oper Dent 28: 215-235.
8. Blunck U, Knitter K, Jahn KR (2007) Six-month clinical evaluation of XP Bond in noncarious cervical lesions. J Adhes Dent 9: 265-268.
9. Kanca J (1992) Resin bonding to wet substrate. I. Bonding to dentin. Quintessence Int 23: 39-41.
10. Kanca J (1996) Wet bonding: effect of drying time and distance. Am J Dent 9: 273-276.
11. Pereira GDS, Paulillo LAMS, de Goes MF, Dias CTS (2001) How wet should dentin be? Comparison of methods to remove excess water during moist bonding. J Adhes Dent 3: 257-264.
12. Pashley DH, Ciucchi B, Sano H (1994) Dentin as a bonding substrate. Dtsch Zahnärztl Z 49: 760-763.
13. Pashley DH, Ciucchi B, Sano H, Horner JA (1993) Permeability of dentin to adhesive agents. Quintessence Int 24: 618-631.
14. van Meerbeek B, Vargas M, Inoue S, Yoshida Y, Peumans M, Lambrechts P, Vanherle G (2001) Adhesives and cements to promote preservation dentistry. Oper Dent 26: 119-144.
15. Tay FR, Gwinnett AJ, Pang KM, Wei SH (1996) Resin penetration into acid-conditioned, moist, and dry dentin: a paradigm using water-free adhesive primers. J Dent Res 75: 1034-1044.
16. Tay FR, Gwinnett AJ, Wei SH (1996) Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer/adhesives. Dent Mater 12: 236-244.
17. Swift EJ, Perdigao J, Heymann HO (1995) Bonding to enamel and dentin: a brief history and state of the art, 1995. Quintessence Int 26: 95-110.
18. Tay FR, Gwinnett AJ, Wei SHY (1996) The overwet phenomenon: a transmission electron microscopic study of surface moisture in the acid-conditioned resin-dentin interface. Am J Dent 9: 161-166.
19. Kunzelmann KH (1998) Verschleissanalyse und-quantifizierung von Füllungsmaterialien in vivo und in vitro. Shaker-Verlag, Aachen.
20. Wassell RW, McCabe JF, Walls AWG (1994) A two-body frictional wear test. J Dent Res 73: 1546-1553.
21. Wassell RW, McCabe JF, Walls AWG (1994) Wear characteristics in a two-body wear test. Dent Mater 10: 269-274.
22. Wassell RW, McCabe JF, Walls AWG (1992) Subsurface deformation associated with hardness measurements of composites. Dent Mater 8: 218-223.
23. Dietschi D, Herzfeld D (1998) In vitro evaluation of marginal and internal adaptation of class II resin composite restorations after thermal and occlusal stressing. Eur J Oral Sci 106: 1033-1042.
24. Krejci I, Reich T, Lutz F, Albertoni M (1990) In-vitro-Testverfahren zur Evaluation dentaler Restaurationssysteme. 1. Computergesteuerter Kausimulator. Schweiz Monatsschr Zahnmed 100: 953-960.
25. Friedl KH, Schmalz G, Hiller K-A, Mortazavi F (1997) Marginal adaptation of composite restorations versus hybrid ionomer/composite sandwich restorations. Oper Dent 22: 21-29.
26. Bortolotto T, Doudou W, Stavrikadis M, Ferrari M, Krejci I (2007) Marginal adaptation after aging of a self-etching adhesive containing an antibacterial monomer. J Adhes Dent 9: 311-317.
27. Onisor I, Bouillaguet S, Krejci I (2007) Influence of different surface treatments on marginal adaptation in enamel and dentin. J Adhes Dent 9: 297-303.
28. Heintze S, Forjanic M, Cavalleri A (2008) Microleakage of class II restorations with different tracers-comparison with SEM quanitative analysis. J Adhes Dent 10: 259-267.
29. Blunck U, Zaslansky P (2007) Effectiveness of all-in-one adhesive systems tested by thermocycling following short and long-term water storage. J Adhes Dent 9: 231-240.
30. Gladys S, van Meerbeek B, Inokoshi S, Willems G, Braem M, Lambrechts P, Vanherle G (1995) Clinical and semiquantitative marginal analysis of four tooth-coloured inlay systems at 3 years. J Dent 23: 329-338.
31. Roulet JF (1994) Marginal integrity: clinical significance. J Dent 22(Suppl 1): S9-S12.
32. Frankenberger R, Tay FR (2005) Self-etch vs etch-and-rinse adhesives: effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater 21: 397-412.
33. Blunck U, Roulet JF (1989) In vitro marginal quality of dentin-bonded composite resins in class V cavities. Quintessence Int 20: 407-412.
34. Peutzfeld A, Asmussen E (2004) Determinants of in vitro gap formation of resin composites. J Dent 32: 109-115.
35. Feilzer AJ, de Gee AJ, Davidson CL (1987) Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66: 1636-1639.
36. De Munck J, van Landuyt K, Peumans M, Poitevin A, Lambrechts P, Braem M, van Meerbeek B (2005) A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 84: 118-132.
37. Compendium S (2006) XP Bond universal total-etch adhesive. Dentsply DeTrey, Konstanz.
38. Roempps Chemie-Lexikon, 8th edn. (1981) Franckh-Fachlexikon, Stuttgart.
39. Tay FR, Gwinnett AJ, Wei SHY (1998) Relation between water content in acetone/alcohol based primer and interfacial ultrastructure. J Dent 26: 147-156.
40. De Munck J, van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, Lambrechts P, Vanherle G (2003) Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82: 136-140.
41. De Munck J, van Meerbeek B, Satoshi I, Vargas M, Yoshida Y, Armstrong S, Lambrechts P, Vanherle G (2003) Microtensile bond strengths of one- and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent 16: 414-420.
42. Frankenberger R, Krämer N, Petschelt A (1999) Fatigue behaviour of different dentin adhesives. Clin Oral Invest 3: 11-17.
43. van Meerbeek B, Kanumilli P, De Munck J, van Landuyt K, Lambrechts P (2005) A randomized controlled study evaluating the effectiveness of a two-step self-etch adhesive with and without selective phosphoric-acid etching of enamel. Dent Mater 21: 375-383.
44. Latta M (2007) Shear bond strength and physicochemical interactions of XP Bond. J Adhes Dent 2007: 245-248.
45. Moll K, Fritzenschaft A, Haller B (2004) In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 35: 845-852.
46. Schuckar M, Geurtsen W (1997) Proximo-cervical adaptation of class II-composite restorations after thermocycling: a quantitative and qualitative study. J Oral Rehabil 24: 766-775.
47. Duarte S, Saad JR (2008) Marginal adaptation of class 2 adhesive restorations. Quintessence Int 39: 413-419.
48. Stavridakis M, Krejci I, Magne P (2005) Immediate dentin sealing of onlay preparations: thickness of pre-cured dentin bonding agent and effect of surface cleaning. Oper Dent 30: 747-757.
49. Krejci I, Guntert A, Lutz F (1994) Scanning electron microscopic and clinical examination of composite resin inlays/onlays up to 12 months in situ. Quintessence Int 25: 403-409.
50. Rosales-Leal JI (2007) Microleakage of class V composite restorations placed with etch-and-rinse and self-etching adhesives before and after thermocycling. J Adhes Dent 7: 255-259.