Comparison of coordinate measuring machines using an optomechanical hole plate

CIRP Annals - Manufacturing Technology

Volumn 54, Issue 1, 2005, Pages 479-482

  De Chiffre, L ^a   Hansen, H N ^a   Morace, R E ^b  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Calibration; Coordinate measuring machine (CMM); Optical measurement

Indexed keywords

CALIBRATION; INTERFEROMETERS; LASER APPLICATIONS; PLATES (STRUCTURAL COMPONENTS); PROBES; SHEET METAL; STAINLESS STEEL; THERMAL EXPANSION;

ARTEFACTS; MECHANICAL MACHINES; OPTICAL MEASUREMENTS; OPTOMECHANICAL HOLE PLATES;

COORDINATE MEASURING MACHINES;

EID: 21944447812     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60149-8     Document Type: Article

References (15)

1. Wilhelm, R.G., Hocken, R., Schwenke, H., 2001, Task specific uncertainty in coordinate metrology, Ann. CIRP, 50/2:553-563.
2. Savio, E., Hansen, H. N., De Chiffre, L., 2002, Approaches to the calibration of freeform artefacts on coordinate measuring machines. Ann. CIRP, 51/1: 433-436.
3. Trapet, E., Savio, E., De Chiffre, L., 2004, New advances in traceability of CMMs for almost the entire range of industrial dimensional metrology needs, Ann. CIRP, 53/1:433-438.
4. Schwenke, H., Neuschaefer-Rube, U., Pfeifer, T., Kunzmann, H., 2002, Optical methods for dimensional metrology in production engineering, Ann. CIRP, 51/2: 685-699.
5. Bruntse, K., 2003, Development of calibration standard for optical coordinate measuring machines. M.Sc. thesis, IPL, Techn. Univ. of Denmark.
6. H Hüser, D., Trapet, E., et al., 1993, Kalibrierung von Kugel- und Lochplatten als Normale für Koordinatenmeßgeräte. Anleitung für DKD-laboratorien. PTB Braunsweig.
7. Kunzmann H., Trapet E., Wäldele F., 1995, Results of the International Comparison of Ball Plate Measurements in CIRP and WECC, Ann. CIRP, 44/1: 479-482.
8. Balsamo, A., Franke, M., Trapet, E., Wäldele, F., De Jonge, L., Vanherk, P., 1997, Results of the CIRP-Euromet intercomparison of ball plate-based techniques for determining CMM parametric errors, Ann. CIRP, 46/1:463-466.
9. De Chiffre, L., Hansen, H.N., 1995, Metrological limitations of optical probing techniques for dimensional measurements. Ann. CIRP, 44/1: 501-504.
10. Hansen, H.N., De Chiffre, L., 1997, A combined optical and mechanical reference artefact for coordinate measuring machines. Ann. CIRP, 46/1: 467-470.
11. Larsen E., 2003, Measurement procedure for optomechanical hole plate, Department of Manufacturing Engineering and Management, Techn. Univ. of Denmark, Kgs. Lyngby.
12. De Chiffre, L., Hansen, H.N., Morace, R.E., 2004, CIRP Interlaboratory Comparison of Coordinate Measuring Machines using an Optomechanical Hole Plate, Final Report. Department of Manufacturing Engineering and Management, Techn. Univ. of Denmark, Kgs. Lyngby.
13. Larsen E., Sobiecki R., Morace R.E., 2004, Reference measurements of Optomechanical Hole Plates used in CIRP Interlaboratory Comparison. Department of Manufacturing Engineering and Management, Techn. Univ. of Denmark, Kgs. Lyngby.
14. Hansen, H.N., De Chiffre, L., 1996, Nordic Audit of coordinate measuring machines, EUROMET Project No. 330, Final report. Department of Manufacturing Engineering and Management, Techn. Univ. of Denmark, Kgs. Lyngby.
15. Hansen, H.N., De Chiffre, L., 1999, An industrial comparison of coordinate measuring machines in Scandinavia with focus on uncertainty statements. Prec. Eng., 23: 185-195.