-
1
-
-
84980287971
-
A path independent integral and the approximate analysis of strain concentration by notches and cracks
-
Rice, J.R. "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks," Journal of Applied Mechanics, Vol. 35, 1968, pp. 379-386.
-
(1968)
Journal of Applied Mechanics
, vol.35
, pp. 379-386
-
-
Rice, J.R.1
-
2
-
-
0005014684
-
Singular behavior at the end of a tensile crack in a hardening material
-
Hutchinson, J.W. "Singular Behavior at the End of a Tensile Crack in a Hardening Material," Journal of the Mechanics of Physics and Solids, Vol.16, 1968, pp.13-31.
-
(1968)
Journal of the Mechanics of Physics and Solids
, vol.16
, pp. 13-31
-
-
Hutchinson, J.W.1
-
3
-
-
33746751566
-
Plane strain deformation near a crack tip in a power law hardening material
-
Rice, J.R. and Rosengren, G.F. "Plane Strain Deformation near a Crack Tip in a Power Law Hardening Material," Journal of the Mechanics of Physics and Solids, Vol. 16, 1968, pp. 1-12.
-
(1968)
Journal of the Mechanics of Physics and Solids
, vol.16
, pp. 1-12
-
-
Rice, J.R.1
Rosengren, G.F.2
-
4
-
-
0015490231
-
The J-integral as a fracture criterion
-
ASTM STP 515
-
Begley, J.A. and Landes, J.D., "The J-integral as a Fracture Criterion," Fracture Mechanics, ASTM STP 515, 1972, pp. 1-23.
-
(1972)
Fracture Mechanics
, pp. 1-23
-
-
Begley, J.A.1
Landes, J.D.2
-
5
-
-
0015474924
-
The effect of specimen geometry on JIC
-
ASTM STP 515
-
Landes, J.D. and Begley, J.A., "The Effect of Specimen Geometry on JIC," Fracture Mechanics, ASTM STP 515, 1972, pp. 24-39.
-
(1972)
Fracture Mechanics
, pp. 24-39
-
-
Landes, J.D.1
Begley, J.A.2
-
6
-
-
0015448428
-
Some further results of J-integral analysis and estimates
-
ASTM STP 536
-
Rice, J.R., Paris, P.C., and Merkle, J.G., "Some Further Results of J-integral Analysis and Estimates," Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, 1973, pp. 231-245.
-
(1973)
Progress in Flaw Growth and Fracture Toughness Testing
, pp. 231-245
-
-
Rice, J.R.1
Paris, P.C.2
Merkle, J.G.3
-
7
-
-
84986957440
-
Method for laboratory determination of JC (Contour Integral for Fracture Analysis)
-
ASTM STP 601
-
Sumpter, J.D.G. and Turner, C.E., "Method for Laboratory Determination of JC (Contour Integral for Fracture Analysis)," Cracks and Fracture, ASTM STP 601, 1976, pp.3-18.
-
(1976)
Cracks and Fracture
, pp. 3-18
-
-
Sumpter, J.D.G.1
Turner, C.E.2
-
8
-
-
85097271105
-
Stability analysis of J-controlled crack growth
-
ASTM STP 668
-
Hutchinson, J.W. and Paris, P.C., "Stability Analysis of J-Controlled Crack Growth," Elastic-Plastic Fracture, ASTM STP 668, 1979, pp.37-64.
-
(1979)
Elastic-Plastic Fracture
, pp. 37-64
-
-
Hutchinson, J.W.1
Paris, P.C.2
-
9
-
-
0019680713
-
Estimations on J-integral and Tearing Modulus T from a single specimen test record
-
ASTM STP 743
-
Ernst, H.A., Paris, P.C. and Landes, J.D., "Estimations on J-integral and Tearing Modulus T from a Single Specimen Test Record," Fracture Mechanics: Thirteenth Conference, ASTM STP 743, 1981, pp. 476-502.
-
(1981)
Fracture Mechanics: Thirteenth Conference
, pp. 476-502
-
-
Ernst, H.A.1
Paris, P.C.2
Landes, J.D.3
-
10
-
-
84885252515
-
-
ASTM E1820-06, online version 2006 Annual Book of ASTM Standards, Volume 03.01
-
ASTM E1820-06, Standard Test Method for Measurement of Fracture Toughness, online version, 2006 Annual Book of ASTM Standards, Volume 03.01.
-
Standard Test Method for Measurement of Fracture Toughness
-
-
-
11
-
-
1542572976
-
Improved crack growth corrections for J-R curve testing
-
Wallin, K. and Laukkanen, A., "Improved Crack Growth Corrections for J-R curve Testing," Engineering Fracture Mechanics, Vol. 71, 2004, pp. 1601-1614.
-
(2004)
Engineering Fracture Mechanics
, vol.71
, pp. 1601-1614
-
-
Wallin, K.1
Laukkanen, A.2
-
12
-
-
67650948030
-
Experimental estimation of J-R curves from Load-CMOD record for SE(B) specimens.
-
Tampa, Florida, November 14-16
-
Zhu, X.K., Leis, B.N., and Joyce, J.A., "Experimental Estimation of J-R Curves from Load-CMOD Record for SE(B) Specimens." The 7th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics, Tampa, Florida, November 14-16, 2007.
-
(2007)
The 7th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics
-
-
Zhu, X.K.1
Leis, B.N.2
Joyce, J.A.3
-
13
-
-
34047224168
-
J-resistance curve testing of HY80 steel using SE(B) specimens and normalization method
-
Zhu, X.K. and Joyce, J.A., "J-Resistance Curve Testing of HY80 Steel Using SE(B) Specimens and Normalization Method," Engineering Fracture Mechanics, Vol. 74, 2007, pp. 2263-2281.
-
(2007)
Engineering Fracture Mechanics
, vol.74
, pp. 2263-2281
-
-
Zhu, X.K.1
Joyce, J.A.2
-
14
-
-
0027627221
-
J and CTOD estimation equations for shallow cracks in single edge notch bend specimens
-
Kirk, M.T. and Dodds, R.H., "J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens," Journal of Testing and Evaluation, Vol. 21, 1993, pp. 228-238.
-
(1993)
Journal of Testing and Evaluation
, vol.21
, pp. 228-238
-
-
Kirk, M.T.1
Dodds, R.H.2
-
15
-
-
1142268971
-
3-D constraint effects on J testing and crack tip constraint in M(T), SE(B), SE(T), C(T) specimens: Numerical study
-
Kim, Y.J., Kim, J.S., Cho, S.M. and Kim, Y.J., "3-D Constraint Effects on J Testing and Crack Tip Constraint in M(T), SE(B), SE(T), C(T) Specimens: Numerical Study," Engineering Fracture Mechanics, Vol. 71, 2004, pp. 1203-1218.
-
(2004)
Engineering Fracture Mechanics
, vol.71
, pp. 1203-1218
-
-
Kim, Y.J.1
Kim, J.S.2
Cho, S.M.3
Kim, Y.J.4
-
16
-
-
34547503893
-
Estimation procedure for J and CTOD fracture parameters using three-point bend specimens
-
Sept 25-29, Calgary, Canada, Paper Number: IPC2006-10165
-
Donato, G.H.B. and Ruggieri, C., "Estimation Procedure for J and CTOD Fracture Parameters Using Three-Point Bend Specimens," Proceedings of the 6th International Pipeline Conference, Sept 25-29, 2006, Calgary, Canada, Paper Number: IPC2006-10165.
-
(2006)
Proceedings of the 6th International Pipeline Conference
-
-
Donato, G.H.B.1
Ruggieri, C.2
-
17
-
-
0001293783
-
J-resistance curve testing of short crack bend specimens using unloading compliance
-
ASTM STP 1131
-
Joyce, J.A., "J-Resistance Curve Testing of Short Crack Bend Specimens Using Unloading Compliance," Fracture Mechanics: Twenty-Second Symposium, ASTM STP 1131, Volume I, 1992, pp. 904-924.
-
(1992)
Fracture Mechanics: Twenty-Second Symposium
, vol.1
, pp. 904-924
-
-
Joyce, J.A.1
-
18
-
-
0027306315
-
Effect of crack depth and mode of loading on the J-R curve behavior of a high-strength steel
-
ASTM STP 1171
-
Joyce, J.A., Hackett, E.M., and Roe, C., "Effect of Crack Depth and Mode of Loading on the J-R Curve Behavior of a High-Strength Steel," Constraint Effects in Fracture, ASTM STP 1171, 1993, pp. 239-263.
-
(1993)
Constraint Effects in Fracture
, pp. 239-263
-
-
Joyce, J.A.1
Hackett, E.M.2
Roe, C.3
-
19
-
-
0031191998
-
Application of two parameter elastic-plastic fracture mechanics to analysis of structures
-
Joyce, J.A. and Link, R.E., "Application of Two Parameter Elastic-Plastic Fracture Mechanics to Analysis of Structures," Engineering Fracture Mechanics, Vol. 57, 1997, pp. 431-446.
-
(1997)
Engineering Fracture Mechanics
, vol.57
, pp. 431-446
-
-
Joyce, J.A.1
Link, R.E.2
-
20
-
-
0029306180
-
An experimental comparison of J and CTOD estimation formulas
-
Morrison, J. and Karisallen, K.J., "An Experimental Comparison of J and CTOD Estimation Formulas," Engineering Fracture Mechanics, Vol. 51, 1995, pp. 145-149.
-
(1995)
Engineering Fracture Mechanics
, vol.51
, pp. 145-149
-
-
Morrison, J.1
Karisallen, K.J.2
|