Effect of morphology of martensite-austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels

Materials Science and Technology

Volumn 26, Issue 9, 2010, Pages 1029-1040

  Li, Y ^a,b   Baker, T N ^a,b  

^a UNIVERSITY OF STRATHCLYDE   (United Kingdom)

^b Vanadium International Technical Committee   (United Kingdom)

Author keywords

Coarse grained heat affected zone; heat affected zone toughness; intercritically reheated coarse grained heat affected zone; martensite austenite phase; particle debonding

Indexed keywords

AUSTENITE PHASE; COARSE GRAINED HEAT AFFECTED ZONE; COARSE-GRAINED; COOLING RATES; CRACK DEVELOPMENT; DIHEDRAL ANGLES; FRACTOGRAPHIC EXAMINATIONS; HEAT AFFECTED ZONE TOUGHNESS; HIGH STRENGTH LOW ALLOY STEELS; MICRO MECHANISMS; MICRO-STRUCTURAL; MICROSTRUCTURAL FEATURES; MULTI-PASS WELDING; NIOBIUM MICROALLOYED STEEL; PARTICLE DEBONDING; RETAINED AUSTENITE; SCANNING AND TRANSMISSION ELECTRON MICROSCOPY; TEST CONDITION; WELD HEAT-AFFECTED ZONE; WELDED JOINTS;

AUSTENITE; CARBIDES; CRACKS; DEBONDING; FRACTURE; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; LIGHT TRANSMISSION; MARTENSITE; MARTENSITIC STEEL; MICROSTRUCTURAL EVOLUTION; MORPHOLOGY; NIOBIUM; OPTICAL MICROSCOPY; PHASE INTERFACES; TRANSMISSION ELECTRON MICROSCOPY; VANADIUM; VANADIUM ALLOYS; WELDED STEEL STRUCTURES; WELDING;

HEAT AFFECTED ZONE;

EID: 77957012825     PISSN: 02670836     EISSN: 17432847     Source Type: Journal    
DOI: 10.1179/026708309X12512744154360     Document Type: Article

References (54)

1. C. T. Liu and J Gurland: Trans. ASM, 1968, 61, 156-167.
2. J. Görrissen: J. Iron Steel Inst., 1949, 162, 16-28.
3. N. P. Allen, W. P. Rees, B. E. Hopkins and H. R. Tipler: J. Iron Steel Inst., 1953, 174, 108-120.
4. G. T. Hahn, M. Cohen and B. L. Averbach: J. Iron Steel Inst., 1962, 200, 634-644.
5. C. J. McMahon and M. Cohen: Acta Metall., 1965, 13, 591-604.
6. B. Mintz, W. B. Morrison and A. Jones: Met. Technol., 1979, 6, 252-260.
7. B. Mintz, W. B. Morrison and R. C. Cochrane: in 'Advances in the physical metallurgy and applications of steels', 222-228; 1982, London, The Metals Society.
8. B. Mintz and P. Campbell: Mater. Sci. Technol., 1987, 3, 845-848.
9. B. Mintz, S. Tajik and R. Vipond: Mater. Sci. Technol., 1994, 10, 89-96.
10. E. A. Almond, D. H. Timbres and J. D. Embury: Proc. 2nd Int. Conf. on 'Fracture', (ed P. L. Pratt), Vol.6, 253; 1969, London, Chapman and Hall.
11. N. J. Petch: Acta Metall., 1986, 34, 1387-1393.
12. M. S. Bingley and T. Siwecki: Proc 8th Int. Conf. on 'Strength of metals and alloys', Vol.3, 1191-1196; 1988, Oxford, Pergamon.
13. M. S. Bingley: Mater. Sci. Technol., 2001, 17, 700-714.
14. B. Mintz, S. Tajik, F. Kavishe and T. J. Baker: Mater. Sci. Technol., 1991, 7, 1005-1009.
15. R. Stevenson: in 'Formable HSLA and dual phase steel', (ed. A. T. Davenport), 101-109; 1979, New York, AIME.
16. Ø. Grong and Ø M. Akselsen: Met. Constr., 1986, 18, 557-562.
17. Ø. M. Akselsen, Ø. Grong and J. K. Solberg: Mater. Sci. Technol., 1987, 3, 649-655.
18. Ø. M. Akselsen, Ø. Grong and G. Rorvik: Scand. J. Metall., 1990, 19, 258-264.
19. S. Lee, B Chun and D. Kwon: Metall. Trans., 1992, 23A, 2803-2816.
20. C. L. Davis and J. E. King: Metall Trans., 1994, 25A, 563-573.
21. K. Ohya, J. Kim, K. Yokoyama and M. Nagumo: Metall. Trans. A, 1996, 27A, 2574-2582.
22. T. Haze, S. Aihara and H. Mabuchi: 'Accelerated cooling of rolled steel', (ed. P. D. Southwick), 235-247; 1986, Warrendale, PA, TMS.
23. B. C. Kim, S. Lee, N. J. Kim and D. Y. Lee: Metall. Trans. A, 1991, 22A, 139-149.
24. C. L. Davis and J. E. King: Mater. Sci. Technol., 1993, 9, 8-15.
25. Y. Li, D. N. Crowther, M. J. W. Green, P. S. Mitchell and T. N. Baker: ISIJ Int., 2001, 41, 46-55.
26. K Yokoyama and M. Nagumo: Met. Mater. Trans. A, 1998, 29A, 551-558.
27. H. Qiu, H. Mori, M. Enoki and T. Kishi: Metall. Mater. Trans. A, 2000, 31A, 2785-2791.
28. A. Lambert-Perlade, A. F. Gourgues, J. Besson, T. Sturel and A. Pineau: Metall. Mater. Trans. A, 2004, 35A, 1039-1053.
29. A. Lambert-Perlade, J. Drillet, A. F. Gourgues, T. Sturel and A. Pineau: Sci. Technol. Weld. Join., 2000, 5, 168-173.
30. K. Uchino and Y. Ohno: Proc. 6th Int. Conf. on 'Offshore mechanics and arctic engineering', Houston, TX, USA, March 1987, ASME, 159-165.
31. Ø. M. Akselsen, J. K. Solberg and Ø. Grong: Scand. J. Metall., 1988, 17, 194-200.
32. J. H. Chen, Y. Kituta, T. Araki, M. Yoneda and Y. Matsuda: Acta Metall., 1984, 32, 1779-1788.
33. S. M. Graham: J. Test. Eval., 2005, 33, 550-556.
34. D. A. Curry and J. F. Knott: Met. Sci., 1979, 13, 341-345.
35. K. Wallin, T. Saario and K. Törrönen: Met. Sci., 1984, 18, 13-16.
36. S. R. Ortner: Fatigue Fract. Eng. Mater. Struct., 2006, 29, 752-769.
37. K. Wallin: Eng. Fract. Mech., 1984, 19, 1085-1093.
38. S. Kim, B. Hwang and S. Lee: Metall. Mater. Trans. A, 2003, 34A, 1275-1281.
39. M. T. Todinov: Nucl. Eng. Des., 2004, 231, 27-38.
40. 'Standard test method for determination of reference temperature, to, for ferritic steels in the transition range', E1921-97, ASTM, Philadelphia, PA, USA, 1997.
41. K. Wallin, A. Bannister and P. Nevasmaa: Proc. BALTICA IV, 1998, Helsinki-Stockholm, VTT Manufacturing Technology.
42. L. C. A. Folch and F. M. Burdekin: Eng. Fract. Mech., 1999, 63, 57-80.
43. R. S. Ranade, F. J. Barbaro, J. G. Williams, P. R. Monroe and P. Krauklis: J. Phys., 1995, 5, C8, 311-316.
44. R. K. Amin and F. B. Pickering: 'Themomechanical processing of microalloyed austenite', (ed A. J. DeArdo et al.), 377-403; 1982, Warrendale, PA, The Metallurgical Society of AIME.
45. C. A. N. Lanzillotto and F. B. Pickering: Met. Sci., 1982, 16, 371-382.
46. S. Aihara and K. Okamoto: 'Influence of local brittle zone on HAZ toughness of TMCP steels', in 'Bulletin 373', 33-43; 1992, New York, Welding Research Council.
47. B. Mintz: Metall. Trans. A, 1997, 28A, 2073-2084.
48. I. Hrivnak, F. Matauda and K. Ikeuchi: Trans. JERI, 1992, 21, 9-31
49. I Hrivnak: ISIJ Int., 1995, 35, 1148-1156.
50. C. S. Smith: Trans. Am. Inst. Min. Met. Eng., 1948, 175, 15-51.
51. L. T. G. Davy and S. G. Glover: J. Aust. Inst. Met., 1968, 13, 71-78.
52. T. Gladman, D. Dulieu and I. D. McIvor: Proc. 'Microalloying' 75', 32-58; 1977, New York, Union Carbide Corp.
53. T. J. Baker and F. P. L. Kavishe: Mater. Sci. Technol., 1986, 2, 576-582.
54. S. Lee, B. C. Kim and D. Kwon: Metall. Trans. A, 1993, 24A, 1133-1141.