Effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels

ISIJ International

Volumn 41, Issue 1, 2001, Pages 46-55

  Li, Y ^a   Crowther, D N ^b   Green, M J W ^b   Mitchell, P S ^c   Baker, T N ^a  

^a UNIVERSITY OF STRATHCLYDE   (United Kingdom)

^b SWINDEN TECHNOLOGY CENTRE   (Netherlands)

^c Vanadium International Technical Committee   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYING; COMPOSITION EFFECTS; COOLING; GRAIN SIZE AND SHAPE; HEATING; IMAGE ANALYSIS; METALLOGRAPHIC MICROSTRUCTURE; METALLOGRAPHIC PHASES; NIOBIUM; SCANNING ELECTRON MICROSCOPY; TOUGHNESS; VANADIUM;

COARSE GRAINED HEAT AFFECTED ZONE; LOW CARBON MICROALLOYED STEEL; RAPID COOLING;

CARBON STEEL;

EID: 0035084473     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.41.46     Document Type: Article

References (39)

1. K. Easterling: Introduction to the Physical Metallurgy of Welding, Butterworth-Heinemann, Oxford, (1992).
2. B. C. Kim, S. Lee, N. Kim and D. Y. Lee: Metall. Trans. A, 22A (1991), 139.
3. C. L. Davis and J. E. King: Mater. Sci. Technol., 9 (1993), 8.
4. C. L. Davis: PhD thesis. University of Cambridge, (1994).
5. O. M. Akselsen, O. Grong and J. K. Solberg: Mater Sci. Technol., 3 (1987), 649.
6. S. Lee, B. Chun and D. Kwon: Metall. Trans. A, 23A (1992), 2803.
7. C. L. Davis and J. E. King: Metall. Trans. A, 25A (1994), 563.
8. A. Barnes: Welding Institute Bulletin, Sept/Oct. (1990), 94.
9. G. R. Wang, T. H. North and K. G. Lewis: Weld. J., 69 (1990), 14.
10. K. Abe, M. Shimizu, S. Takashima and H. Kaji: Int. Conf on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, ed by I. Tamura, ISIJ, Tokyo, (1988), 322.
11. S. Okaguchi, T. Hashimoto and H. Ohtani: Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, ed. by I. Tamura, ISIJ, Tokyo, (1988), 330.
12. P. H. M. Hart and P. S. Mitchell: Weld. J., 74 (1995). 239.
13. D. N. Crowther: Report No. SL/PP/RSC/S12005/1/95/X, British Steel plc., Swinden Laboratories, (1995).
14. K. Uchino and Y. Ohno: Proc. 6th Int. Offshore Mechanics and Arctic Engineering Symposium, Houston, Texas, March (1987), 159.
15. P. L. Harrison and S. E. Webster: 36th MWSP Conf. Proc. ISS-AIME, Warrendale, PA. XXXII, (1995), 551.
16. P. S. Mitchell, P. H. M. Hart and W. B. Morrison: Proc. Microalloying 95', ISS, Warrendale, PA, (1995), 149.
17. Y. Li, D. N. Crowther, M. J. W. Green, P. S. Mitchell and T. N. Baker: Thermomechanical Processing of Steels, The Institute of Materials, London, (2000), 69.
18. D. N. Crowther: Report No. SL/PP/RSC/S11826/2/94/X, British Steel plc., Swinden Laboratories, (1994).
19. O. M. Akselsen, J. K. Solberg and O. Grong: Scand. J. Metall., 17 (1988), 194.
20. A. Aihara and K. Okeuchi: Weld. Res. Counc. Bull., 373 (1992), 33.
21. F. Matsuda, K. Ikeuchi, Y. Fukada, Y. Horii, H. Okada, T. Shiwafu, C. Shoga and S. Suzuki: Weld. World, 38 (1996), 36.
22. I. Hrivnak, F. Matauda and K. Ikeuchi: Transactions of JERI, 21 (1992), 101.
23. T. Tagawa, T. Miyata, S. Aihara and K. Okamoto: In:. Symp. on Low Carbon Steels for the 90's, The Minerals, Metals and Materials Society, Warrendale, PA, (1993), 493.
24. T. W. Montemarano: Journal of Ship Production, 2 (1986), 145.
25. B. Mintz: Advances in Fracture Research, Vol. 2, Pergamon Press, Oxford, (1984), 1247.
26. B. Mintz and J. Kolahi-aval: Mater. Sci. Technol., 2 (1986), 1046.
27. C. J. McMahon and M. Cohen: Acta Metall., 13 (1965), 591.
28. B. Mintz: Metall. Trans. A, 28A (1997), 2073.
29. K. Ikeuchi, J. Liao, H. Tanabe and F. Matsuda: ISIJ. Int., 35 (1995), 1203.
30. M. Nakanishi, Y. Komizo and Y. Fukada: Q. J. Jpn. Weld. Soc., 4 (1986), 447.
31. T. Haze and S. Aihara: Offshore Machanical and Arctic Engineering, ASME, 3 (1988), 515.
32. B. de. Meester: ISIJ Int., 37 (1997), 537.
33. M. J. Roberts: Metall. Trans. A, 1 (1970), 3287.
34. J. P. Naylor and P. R. Krahe: Metall. Trans. A, 5A (1974) 1699.
35. T. N. Baker and R. L. Reuben: Advances in the Physical Metallurgy and Application of Steels, The Metals Society, Liverpool, (1981), 213.
36. P. K. Amin and F. B. Pickering: Thermomechanical Processing of Microalloyed Austenite, ed by A. J. DeArdo et al., AIME, Warrendale, PA, (1983), 337.
37. F. B. Pickering: HSLA Steel: Metallurgy and Applications, ASM International, Metals Park, OH, (1995), 305.
38. D. T. Llewellyn: Ironmaking Steelmaking, 23 (1996), 397.
39. F. B. Pickering: HSLA Steel: Technology and Application, ASM, Metals Park, OH, (1984), 1.