Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 1039-1053

  Lambert Perlade, A ^a   Gourgues, A F ^b   Besson, J ^b   Sturel, T ^a   Pineau, A ^b  

^a IRSID   (France)

^b PSL RESEARCH UNIVERSITY   (France)

Author keywords

[No Author keywords available]

Indexed keywords

BEREMIN MODEL; CLEAVAGE FRACTURE; CROSS SECTIONAL ANALYSIS; DB MODEL; DOUBLE BARRIERS; DUCTILE-TO-BRITTLE TRANSITION; FRACTURE SURFACES; FRACTURE TOUGHNESS TESTS; HIGH-STRENGTH; LOW ALLOY STEELS; LOW-ALLOY; MASTER-CURVE; MICROMECHANISMS; NOTCHED BAR; PHYSICALLY BASED; PROBABILISTIC MODELS; TENSILE TESTS; THERMAL SIMULATIONS;

BRITTLE FRACTURE; CERIUM ALLOYS; CORROSION; DUCTILE FRACTURE; HEAT AFFECTED ZONE; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; MARTENSITE; MARTENSITIC STAINLESS STEEL; MICROSTRUCTURE; TENSILE STRENGTH; TENSILE TESTING;

FRACTURE TOUGHNESS;

EID: 33745228820     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1007-6     Document Type: Article

References (47)

1. L. Devillers and D. Kaplan: Technical Report No. RE 88318, IRSID, Maizières-lès-Metz, Cedex, 1988 (in French).
2. C.L. Davis and J.E. King: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 563-73.
3. T. Haze and S. Aihara: IIW Document No. IX-1423-86, IIW, Roissy, France, May 1986, pp. 1-38.
4. M. Toyoda: Fracture Toughness Evaluation of Steel Welds. Review Part II, University of Osaka, Osaka, 1988.
5. K. Okamoto, S. Aihara, A. Yoshie, T. Hasegawa, M. Kibe, H. Makino, H. Kawasaki, N. Doi, T. Tsuzuki, R. Chijiiwa, and N. Saito: Pacrim Weldcon'92 - Darwin "Transferring Technology and know-How," Darwin, Australia, 1992.
6. K.L. Kenney, W.G. Reuter, H.S. Reemsnyder, and D.K. Matlock: Fatigue and Fracture Mechanics, ASTM STP 1321, J.H. Underwood, B.D. Macdonald, and M.R. Mitchell, eds., ASTM, Philadelphia, PA, 1997, vol. 28, pp. 427-49.
7. Z.L. Zhou and S.H. Lin: Acta Metall. Sinica (English Lett.), 1998, vol. 11, pp. 87-92.
8. O.M. Akselsen, J.K. Solberg, and 0. Grong: Scand. J. Metall., 1988, vol. 17, pp. 194-200.
9. B.C. Kim, S. Lee, N.J. Kim, and D.Y. Lee: Metall. Trans. A, 1991, vol. 22A, pp. 139-49.
10. F. Matsuda, K. Ikeuchi, H. Okada, I. Hrivnak, and H.S. Park: Trans. JWRI, 1994, vol. 23, pp. 231-38.
11. R.E. Dolby and J.F. Knott: J. Iron Steel Inst., 1972, vol. 210, pp. 857-65.
12. J.P. Naylor and P.R. Krahe: Metall. Trans., 1974, vol. 5, pp. 1699-701.
13. E. Bouyne, H.M. Flower, T.C. Lindley, and A. Pineau: Scripta Mater., 1998, vol. 39, pp. 295-300.
14. A.-F. Gourgues, H.M. Flower, and T.C. Lindley: Mater. Sci. Technol., 2000, vol. 16, pp 26-40.
15. P. Brozzo, G. Buzzichelli, A. Mascanzoni, and M. Mirabile: Met. Sci., 1977, vol. 11, pp. 123-29.
16. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Metall., 1984, vol. 32, pp. 1779-88.
17. S. Aihara and T. Haze: TMS Annual Meeting, TMS, Warrendale, PA, 1988, paper no. A88-14.
18. A. Lambert, J. Drillet, A.F. Gourgues, T. Sturel, and A. Pineau: Sci. Technol. Welding Joining, 2000, vol. 5, pp. 168-73.
19. A. Lambert-Perlade: Ph.D. Thesis Ecole des Mines de Paris, Paris, 2001 (in French).
20. Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-01, ASTM Standards, New York, NY, 2001.
21. A. Lambert, X. Garat, T. Sturel, A.F. Gourgues, and A. Gingell: Scripta Mater., 2000, vol. 43, pp. 161-66.
22. A. Pineau: in Advances in Fracture Research (ICF5), D. Francois, ed., Pergamon Press, Oxford, United Kingdom, 1981, vol. 2, pp. 553-77.
23. F.M. Beremin: Metall. Trans. A, 1983, vol. 14A, pp. 2277-87.
24. R.M. McMeeking: J. Mech. Phys. Solids, 1977, vol. 25, pp. 357-81.
25. A. Lambert, A.-F. Gourgues, T. Sturel, and A. Pineau: Euromat 2000, D. Miannay, P. Coste, D. Francois, and A. Pineau, eds, Elsevier, Amsterdam, 2000, pp. 97-102.
26. A. Echeverria and J.M. Rodriguez-Ibabe: Mater. Sci. Eng., 2003, vol. A346, pp. 149-58.
27. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395-410.
28. S. Lee, B.C. Kim, and D. Kwon: Metall. Trans. A, 1993, vol. 24A, pp. 1133-41.
29. D.A. Curry and J.F. Knott: Met. Sci., 1979, vol. 13, pp. 341-45.
30. J.R. Rice and G.F. Rosengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1-12.
31. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 13-31.
32. D.A. Curry: Met. Sci., 1980, vol. 14, pp. 319-26.
33. T. Tagawa, T. Miyata, S. Aihara, and K. Okamoto: Int. Symp. on Low- Carbon Steels for the 90' s, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1993, pp. 493-500.
34. F.M. Beremin: J. Mec. Appl., 1980, vol. 4, pp. 307-25 and 327-42 (in French).
35. K. Wallin, T. Saario, and K. Torronen: Met. Sci., 1984, vol. 18, pp. 13-16.
36. K. Wallin: in Defect Assessment in Components-Fundamentals and Applications, ESIS/EGF9, J.G. Blauel and K.-H. Schwalbe, eds., Mechanical Engineering Publications, London, 1991, pp. 415-45.
37. K. Wallin: Int. J. Pres. Ves. Piping, 1993, vol. 55, pp. 61-79.
38. Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range, ASTM E1921-97, ASTM Standards, New York, NY, 1997, pp. 1068-84.
39. G. Sanz: Rev. Metall., Cah. Inf. Tech., 1980, vol. 77, pp. 621-42.
40. F. Minami, A. Brückner-Foit, D. Muntz, and B. Trolldenier: Int. J. Fract., 1992, vol. 54, pp. 197-210.
41. K. Hojo, I. Muroya, and A. Brückner-Foit: Nucl. Eng. Des., 1997, vol. 174, pp. 247-58.
42. A. Martín-Meizoso, I. Ocaňa-Arizcorreta, J. Gil-Sevillano, and M. Fuentes-Pérez: Acta Metall. Mater., 1994, vol. 42, pp. 2057-68.
43. T. Lin, A.G. Evans, and R.O. Ritchie: Metall. Trans. A, 1987, vol. 18A, pp. 641-51.
44. T. Narstrom and M. Isacsson: Mater. Sci. Eng., 1999, vol. A271, pp. 224-31.
45. A. Vasilev, S. Firstov, and A. Koval: in Recent Advances in Fracture, R.K. Mahidhara, A.B. Geltmacher, P. Matic, and K. Sadananda, eds., TMS, Warrendale, PA, 1997, pp. 315-26.
46. J.M. Rodrigues-Ibabe: Mater. Sci. Forum, 1998, vols. 284-286, pp. 51-62.
47. G.T. Hahn: Metall. Trans. A, 1984, vol. 15A, pp. 947-59.