Evaluation of an experimental dental porcelain

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 3, Issue 8, 2010, Pages 610-618

  Hamouda, Ibrahim M ^a   El Waseffy, Noha A ^a   Hasan, Ahmed M ^a   El Falal, Abeer A ^a  

^a Mansoura University   (Egypt)

Author keywords

Bond strength; Ceramics; Dental porcelain; Fracture toughness; Hardness

Indexed keywords

BOND STRENGTH; CATASTROPHIC FAILURES; CERAMICS; COHESIVE FAILURES; CROSSHEAD SPEED; DENTAL PORCELAIN; GLASS MATRICES; LEUCITE CRYSTALS; MICROHARDNESS TESTER; MIXED MODE; ORAL CAVITY; RAPID CRACK PROPAGATION; ROD-LIKE STRUCTURES; SCANNING ELECTRON MICROSCOPE; THREE-POINT BENDING TEST; UNIVERSAL TESTING MACHINES;

BOND STRENGTH (MATERIALS); CRYSTAL MICROSTRUCTURE; CRYSTALS; FRACTURE TOUGHNESS; PORCELAIN; SCANNING ELECTRON MICROSCOPY; VICKERS HARDNESS;

FRACTURE;

ARTICLE; BOND STRENGTH; CHEMICAL COMPOSITION; FRACTURE; HARDNESS; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SHEAR STRESS; TENSILE STRENGTH; TOOTH PROSTHESIS;

DENTAL PORCELAIN; HARDNESS; MATERIALS TESTING; METALS; MICROSCOPY, ELECTRON, SCANNING; SHEAR STRENGTH;

EID: 77956342313     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2010.07.011     Document Type: Article

References (53)

1. Akova T., Ucara Y., Tukay A., Balkaya C., Brantley W.A. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent. Mater. 2008, 24:1400-1404.
2. Albakry M., Guazzato M.G., Swain M.V. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J. Dent. 2003, 31:181-188.
3. Almilhatti H.J., Giampaolo E.T., Vergani C.E., Machado A.L., Pavarina A.C. Shear bond strength of aesthetic materials bonded to Ni-Cr alloy. J. Dent. 2003, 31:205-211.
4. Anusavice K. Phillips' Science of Dental Materials 2003, Elsevier, Sauders, pp. 94,98, 621-654. 11th ed.
5. Bagby M., Marshall S.J., Marshall G.W. Metal ceramic compatibility: a review of the literature. J. Prosthet. Dent. 1990, 63:21-25.
6. Barrelro M.M., Riesgo, Vicente E.E. Phase identification in dental porcelains for ceramo-metallic restorations. Dent. Mater. 1989, 5:51-57.
7. Bondioli I.R., Bottino M.A. Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures. J. Prosthet. Dent. 2004, 91:541-547.
8. Cesar P.F., Soki F.N., Yoshimura H.N., Gonzaga C.C., Styopkin V. Influence of leucite content on slow crack growth of dental porcelains. Dent. Mater. 2008, 24:1114-1122.
9. Cesar P.F., Yoshimura H.N., Miranda W.G., Okada C.Y. Correlation between fracture toughness and leucite content in dental porcelains. J. Dent. 2005, 33:721-729.
10. Craig R.G., Powers J.M. Restorative Dental Materials 2002, Mobsy Inc., Missouri, p. 552. 11th ed.
11. Dahl B.J., Oilo G. In vivo wear ranking of some restorative materials. Quint. Int. 1994, 25:561-565.
12. Deger S., Caniklioglu M.B. Effects of tin plating on base metal alloy-ceramic bond strength. Int. J. Prosthodont. 1998, 11:165-172.
13. Della Bona A. Characterizing ceramics and the interfacial adhesion to resin: the relationship of surface treatment, bond strength, interfacial toughness and fractography. J. Appl. Oral Sci. 2005, 13:101-109.
14. Della Bona A., Anusavice K.J., Hood J.A.A. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int. J. Prosthodont. 2002, 15:248-253.
15. de Melo R.M., Travassos A.C., Neisser M.P. Shear bond strengths of a ceramic system to alternative metal alloys. J. Prosthet. Dent. 2005, 93:64-69.
16. Denry I.L., Mackert J.R., Holloway J.A., Rosenstiel S.F. Effect of cubic leucite stabilization on the flexural strength of feldspathic dental porcelain. J. Dent. Res. 1996, 75:1928-1935.
17. Derand T., Hero H. Bond strength porcelain on cast vs. wrought titanium. Scand. J. Dent. Res. 1992, 100:184-188.
18. EL-Meliegy E. Preparation and characterization of low fusion leucite dental porcelain. Br. Ceram. Trans. 2003, 102:261-264.
19. Esteban D., Mahrokh Y., Angelo A. Fracture toughness of nine flowable resin composites. J. Prosthet. Dent. 2003, 89:261-267.
20. Fisher R.M., Moore B.K., Swartz M.L., Dykema R.W. The effects of enamel wear on the metal-porcelain interface. J. Prosthet. Dent. 1983, 50:627-631.
21. Giordano R.A. Dental ceramic restorative systems. Compend. Contin. Educ. Dent. 1996, 17:779-782. 784-786, 794.
22. Goharian R., Maleknejad F., Salari T., Ghavamnasiri M., Derhami M. Effect of adhesives on bond strength of porcelain veneer to base metal alloy. Quint. Int. 2002, 33:595-599.
23. Hammad I.A., Goodkind R.J., Gerberich W.W. A shear test for the bond strength of ceramometals. J. Prosthet. Dent. 1987, 58:431-437.
24. Ironside J.G., Swain M.D. Ceramics in dental restorations-a review and critical issues. J. Australas. Ceram. Soc. 1998, 34:78-91.
25. Joias R.M., Tango R.N., Junho de Araujo J.E., Junho de Araujo M.A., Ferreira Anzaloni Saavedra Gde S., Paes-Junior T.J., et al. Shear bond strength of a ceramic to Co-Cr alloys. J. Prosthet. Dent. 2008, 99:54-59.
26. Jones D.W. Brief overview of dental ceramics. J. Can. Dent. Assoc. 1998, 64:648-650.
27. Kelly M., Asgar K., O'Brien W.J. Tensile strength determination of the interface between porcelain-fused to gold. J. Biomed. Mater. Res. 1969, 3:403-408.
28. Kelly J.R., Campbell S.D. Ceramics in dentistry: historical roots and current perspectives. J. Prosthet. Dent. 1996, 75:18-32.
29. Kim K.H., Okuno O. Microfracture behavior of composite resins containing irregular-shaped fillers. J. Oral Rehabil. 2002, 29:1153-1159.
30. King B.W., Tripp H.P., Duckworth W.H. Nature of adherence of porcelain enamels to metals. J. Am. Ceram. Soc. 1959, 42:504-525.
31. Knap F.J., Ryge G. Study of bond strength of dental porcelain fused to metal. J. Dent. Res. 1966, 45:1047-1051.
32. Leinfelder K.F. Ask the expert, will ceramic restorations be challenged in the future?. JADA 2001, 132:46-47.
33. Liua J., Qiu X.M., Zhu S., Sun D.Q. Microstructures and mechanical properties of interface between porcelain and Ni-Cr alloy. Mater. Sci. Eng. A 2008, 497:421-425.
34. Monasky G.E., Taylor D.F. Studies on the wear of porcelain, enamel, and gold. J. Prosthet. Dent. 1971, 25:299-306.
35. Noort R.V. Introduction to Dental Materials 2002, Mobsy Inc., UK, pp. 231-236. 2nd ed.
36. O'Brien, W.J., 1977. Cohesive plateau theory of porcelain alloy bonding. In: Yamada H.N., Grenoble P.B. (Eds.), Dental Porcelain: The State of the Art. Univ of S Calif School of Dentistry, Los Angeles, pp. 137-141.
37. O'Brien W.J. Dental Materials and Their Selection 2002, Quintessence Publishing Co, Inc., Chicago, pp. 214-216. 3rd ed.
38. O'Brien W.O., Ryge G. Relation between molecular force calculation and observed strengths of enamel-metal interfaces. J. Am. Ceram. Soc. 1964, 74:5-8.
39. Ohno H., Araki Y., Endo K. ESCA study on dental alloy surfaces modified by Ga-Sn alloy. J. Dent. Res. 1992, 71:1332-1339.
40. Papazoglou E., Brantley W.A. Porcelain adherence vs. force to failure for palladium-gallium alloys: a critique of metal-ceramic bond testing. Dent. Mater. 1998, 14:112-119.
41. Pinto M.M., Cesar P.F., Rosa V., Yoshimura H.N. Influence of pH on slow crack growth of dental porcelains. Dent. Mater. 2008, 24:814-823.
42. Powers J.M., Sakaguchi R.L. Craig's, Restorative Dental Materials 2006, Mobsy Elsevier, St. Louis, Missouri, pp. 468-469. 12th ed.
43. Rosenstiel S.F., Land M.F., Fujimoto J. Contemporary Fixed Prosthodontics 1988, vol. 22. C.V. Mosby, St. Louis, pp. 392-395. 1st ed.
44. Sant'anna F.E., Monnerat M.E., Chevitarese O., Stuani M.B. Bonding brackets to porcelain-in vitro study. Braz. Dent. J. 2002, 13:191-196.
45. Schweitzer D.M., Goldstein G.R., Ricci J.L., Silva N.R.F.A., Hittelman E.L. Comparison of bond strength of a pressed ceramic fused to metal versus feldspathic porcelain fused to metal. J. Prosthodont. 2005, 14:239-247.
46. Scolaro J.M. Bonding ceramic to metal: a comparison using shear test. Rev. FOB 2002, 10:57-62.
47. Seghi R.R., Rosenstiel S.F., Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J. Dent. Res. 1991, 70:221-225.
48. Shell J.S., Nielsen J.P. Study of the bond between gold alloys and porcelain. J. Dent. Res. 1962, 41:1424-1437.
49. Thompson J.Y., Anusavice K.J., Naman A., Morris H.F. Fracture surface characterization of clinically failed all-ceramic crowns. J. Dent. Res. 1994, 73:1824-1832.
50. Vickery R.C., Badinelli L.A. Nature of attachment forces in porcelain-gold systems. J. Dent. Res. 1968, 47:683-689.
51. Yamamoto M. Principles and Methods of Metal-Ceramics 1988, Quintessence, Chicago, pp. 106-119.
52. Yli-Urpo K. Investigation of a dental gold alloy and its ceramic bonding. Acta Odontol. Scand. 1975, 69(Suppl.):26.
53. Yoshimura H.N., Cesar P.F., Miranda W.G., Gonzaga C.C., Okada C.Y. Fracture toughness of dental porcelains evaluated by IF, SCF, and SEPB methods. J. Am. Ceram. Soc. 2005, 88:1680-1683.