Numerical simulation of residual stress relaxation in shot peened high-strength aluminum alloys under reverse bending fatigue

Journal of Engineering Materials and Technology

Volumn 132, Issue 1, 2010, Pages 0110121-0110129

  Benedetti, M ^a   Fontanari, V ^a   Monelli, B D ^a  

^a UNIVERSITY OF TRENTO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; ELASTOPLASTICITY; HIGH STRENGTH ALLOYS; RESIDUAL STRESSES; SHOT PEENING; STRESS RELAXATION;

ELASTIC-PLASTIC RESPONSE; FATIGUE ENDURANCES; HIGH STRENGTH ALUMINUM ALLOYS; LOW CYCLE FATIGUES; MICROHARDNESS TESTS; RESIDUAL STRESS FIELDS; REVERSE BENDING; SUPERFICIAL LAYERS;

FATIGUE OF MATERIALS;

EID: 77955238162     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.3184083     Document Type: Article

References (34)

1. Landgraf, R. W., and Chernenkoff, R. A., 1988, "Residual Stress Effects on Fatigue of Surface Processed Steels", Analytical and Experimental Methods for Residual Stress Effects in Fatigue, R. L. Champoux, J. H. Underwood, and J. A. Kapp, eds., American Society for Testing and Materials, West Conshohocken, PA, ASTM STP 1004, pp. 1-12.
2. Beghini, M., and Bertini, L., 1990, "Fatigue Crack Propagation Through Residual Stress Fields With Closure Phenomena", Eng. Fract. Mech., 36 (3), pp. 379-387.
3. Was, G. S., and Pelloux, R. M., 1979, "The Effect of Shot Peening on the Fatigue Behavior of Alloy 7075-T6", Metall. Trans. A, 10 (5), pp. 656-658.
4. Mutoh, Y., Fair, G. H., Noble, B., and Waterhouse, R. B., 1987, "The Effect of Residual Stresses Induced by Shot Peening on Fatigue Crack Propagation in Two High Strength Aluminium Alloys", Fatigue Fract. Eng. Mater. Struct., 10 (4), pp. 261-272.
5. Hanagarth, H., Vöhringer, O., and Macherauch, E., 1990, "Relaxation of Shot Peening Residual Stresses of the Steel 42 CrMo 4 by Tensile or Compressive Deformation", Proceedings of the Fourth International Conference on Shot Peening, K. Iida ed., The Japan Society of Precision Engineering, Tokyo, Japan, pp. 337-345.
6. Vöhringer, O., 1987, "Relaxation of Residual Stresses by Annealing or Mechanical Treatment", Advances in Surface Treatments, Vol. 4, A. Niku-Lari, ed., Pergamon, Oxford, pp. 367-396.
7. Kodama, S., 1972, "The Behaviour of Residual Stress During Fatigue Stress Cycles", Proceedings of the Second International Conference on Mechanical Behavior of Metals, Society of Material Science, Kyoto, Japan, Vol. 2, pp. 111-118.
8. McClung, R. C., 2007, "A Literature Survey on the Stability and Significance of Residual Stresses During Fatigue", Fatigue Fract. Eng. Mater. Struct., 30, pp. 173-205.
9. Jhansale, H. R., and Topper, T. H., 1973, "Engineering Analysis of the Inelastic Stress Response of a Structural Metal Under Variable Cyclic Strains", Cyclic Stress-Strain Behavior-Analysis, Experimentation, and Failure Prediction, American Society for Testing and Materials, West Conshohocken, PA, pp. 246-270.
10. Wallace, W. P., and Frankel, J. P., 1949, "Relief of Residual Stresses by Single Fatigue Cycle", Weld. J. (Miami, FL, U. S.), 38, pp. 565-574.
11. Zhuang, W. Z., and Halford, G. R., 2001, "Investigation of Residual Stress Relaxation Under Cyclic Load", Int. J. Fatigue, 23, pp. S31-S37.
12. Rao, D., Wang, D., Chen, L., and Ni, C., 2007, "The Effectiveness Evaluation of 314L Stainless Steel Vibratory Stress Relief by Dynamic Stress", Int. J. Fatigue, 29, pp. 192-196.
13. Benedetti, M., Bortolamedi, T., Fontanari, V, and Frendo, F., 2004, "Bending Fatigue Behaviour of Differently Shot Peened Al 6082 T5 Alloy", Int. J. Fatigue, 26, pp. 889-897.
14. Zinn, W., and Scholtes, B., 1999, "Mechanical Surface Treatments of Lightweight Materials-Effects on Fatigue Strength and Near-Surface Microstructures", J. Mater. Eng. Perform., 8, pp. 145-151.
15. Bathias, C., Bonnafe, J. P., Lebrun, J. L., and Maeder, G., 1988, "X-Ray Diffraction and Acoustic Emission Study of Fatigue Damage in Aluminium Alloys", Analytical and Experimental Methods for Residual Stress Effects in Fatigue, R. L. Champoux, J. H. Underwood, and J. A. Kapp, eds., American Society for Testing and Materials, West Conshohocken, PA, ASTM STP 1004, pp. 25-36.
16. Hammond, D. W, and Meguid, S. A., 1990, "Crack Propagation in the Presence of Shot-Peening Residual Stresses", Eng. Fract. Mech., 37, pp. 373-387.
17. Potter, J. M., and Millard, R. A., 1976, "The Effect of Temperature and Load Cycling on the Relaxation of Residual Stresses", Proceedings of the 25th Conference on Application of X-Ray Analysis, H. F. McMurdie, C. S. Barrett, J. B. Mewkirk, and C. O. Ruud, eds., pp. 309-319.
18. Rasouli Yazdi, S., and Lu, J., 1999, "Prediction of Relaxation of Residual Stress Induced by Shot Peening in Aluminium Alloys", Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, pp. 880-883.
19. Özdemir, A. T., and Edwards, L., 1997, "Relaxation of Residual Stresses at Cold-Worked Fastener Holes Due to Fatigue Loading", Fatigue Fract. Eng. Mater. Struct., 20, pp. 1443-1451.
20. Benedetti, M., Fontanari, V., Scardi, P., Ricardo, C. L. A., and Bandini, M., 2009, "Reverse Bending Fatigue of Shot Peened 7075-T651 Aluminium Alloy: The Role of Residual Stress Relaxation", Int. J. Fatigue, 31, pp. 1225-1236.
21. Noyan, I. C., and Cohen, J. B., 1987, Residual Stress Measurement by Diffraction and Interpretation, Springer-Verlag, New York.
22. Prevey, P. S., 1990, "X-Ray Diffraction Characterisation of Residual Stresses Produced by Shot Peening", Shot Peening Theory and Application, Proceedings of IITT-International, Gournay sur Marne, France, A. Niku-Lari, ed., pp. 81-93.
23. Dong, Y. H., and Scardi, P., 2000, "Marq X-New Program for Whole Powder Pattern Fitting", J. Appl. Crystallogr., 33, pp. 184-189.
24. 1971, "Residual Stress Measurement by X-Ray Diffraction", Information Report No. SAE J784a.
25. Fontanari, V., Frendo, F., Bortolamedi, Th., and Scardi, P., 2005, "Comparison of the Hole-Drilling and X-Ray Diffraction Methods for Measuring the Residual Stresses in Shot Peened Aluminium Alloys", J. Strain Anal. Eng. Des., 40, pp. 199-209.
26. Valentini, E., Benedetti, M., Fontanari, V., Beghini, M., Bertini, L., and Santus, C., 2007, "Fine Increment Hole-Drilling Method for Residual Stress Measurement, Proposal of a Calibrating Apparatus", Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece.
27. Meininger, J. M., Dickerson, S. L., and Gibeling, J. C., 1996, "Observations of Tension/Compression Asymmetry in the Cyclic Deformation of Aluminum Alloy 7075", Fatigue Fract. Eng. Mater. Struct., 19 (1), pp. 85-97.
28. Lemaitre, J., and Chaboche, J. L., 1990, Mechanics of Solid Materials, Cambridge University Press, Cambridge.
29. Beghini, M., and Bertini, L., 1990, "Residual Stress Modelling by Experimental Measurements and Finite Elements Analysis", J. Strain Anal. Eng. Des., 25 (2), pp. 103-108.
30. Smith, D. J., Farrahi, G. H., Zhu, W. X., and McMahon, C. A., 2001, "Experimental Measurement and Finite Element Simulation of the Interaction Between Residual Stresses and Mechanical Loading", Int. J. Fatigue, 23, pp. 293-302.
31. Xu, Z. H., and Li, X., 2005, "Influence of Equi-Biaxial Residual Stress on Unloading Behaviour of Nanoindentation", Acta Mater., 53 (7), pp. 1913-1919.
32. Altenberger, I., Scholtes, B., Martin, U., and Oettel, H., 1999, "Cyclic Deformation and Near Surface Microstructures of Shot Peened or Deep Rolled Austenitic Stainless Steel AISI 304", Mater. Sci. Eng., A, 264, pp. 1-16.
33. Dattoma, V., De Giorgi, M., and Nobile, R., 2004, "Numerical Evaluation of Residual Stress Relaxation by Cyclic Load", J. Strain Anal. Eng. Des., 39 (6), pp. 663-672.
34. Holzapfel, H., Schulze, V., Vöhringer, O., and Macherauch, E., 1998, "Residual Stress Relaxation in an AISI 4140 Steel Due to Quasistatic and Cyclic Loading at Higher Temperatures", Mater. Sci. Eng., A, 248, pp. 9-18.