Reverse bending fatigue of shot peened 7075-T651 aluminium alloy: The role of residual stress relaxation

International Journal of Fatigue

Volumn 31, Issue 8-9, 2009, Pages 1225-1236

  Benedetti, M ^a   Fontanari, V ^a   Scardi, P ^a   Ricardo, C L A ^a   Bandini, M ^b  

^a UNIVERSITY OF TRENTO   (Italy)

^b Peen Service   (Italy)

Author keywords

Aluminium alloys; Fatigue strength; Residual stress relaxation; Shot peening

Indexed keywords

ALUMINIUM ALLOYS; BIAXIAL RESIDUAL STRESS; COMPRESSIVE RESIDUAL STRESS; FATIGUE BEHAVIOUR; FATIGUE CRACK INITIATION; FATIGUE ENDURANCES; FATIGUE IMPROVEMENT; FATIGUE INITIATION; FATIGUE LIFE; FATIGUE LOADS; FATIGUE STRENGTH; LOAD LEVELS; MULTI-AXIAL FATIGUE CRITERION; PEENING INTENSITY; PLASTIC FLOW STRESS; RESIDUAL STRESS PROFILES; REVERSE BENDING; STRESS REDISTRIBUTION; SURFACE MODIFICATION;

ALUMINUM; ALUMINUM ALLOYS; CRACK INITIATION; CRACKS; DURABILITY; FATIGUE OF MATERIALS; PLASTIC FLOW; SHOT PEENING; STRAIN HARDENING; STRENGTH OF MATERIALS; STRESS ANALYSIS; STRESS CORROSION CRACKING; STRESS RELAXATION; SURFACES; X RAY DIFFRACTION;

RESIDUAL STRESSES;

EID: 67349184623     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2008.11.017     Document Type: Article

References (35)

1. ASM handbook. Properties and selection: nonferrous alloys and special-purpose materials, 10th ed., vol. 2. Materials Park (Ohio): American society for metals; 1991.
2. Was G.S., and Pelloux R.M. The effect of shot peening on the fatigue behavior of alloy 7075-T6. Metall Mater Trans A 10 5 (1979) 656-658
3. Mutoh Y., Fair G.H., Noble B., and Waterhouse R.B. The effect of residual stresses induced by shot peening on fatigue crack propagation in two high strength aluminium alloys. Fatigue Fract Eng Mater Struct 10 4 (1987) 261-272
4. Sharp P.K., Clayton J.Q., and Clark G. The fatigue resistance of peened 7050-T7451 aluminium alloy-repair and retreatment of a component surface. Fatigue Fract Eng Mater Struct 17 3 (1994) 243-252
5. Wagner L. Mechanical surface treatments on titanium, aluminum and magnesium alloy. Mater Sci Eng A263 (1999) 210-216
6. Benedetti M., Bortolamedi T., Fontanari V., and Frendo F. Bending fatigue behaviour of differently shot peened Al 6082 T5 alloy. Int J Fatigue 26 (2004) 889-897
7. Wagner L., and Lütjering G. Influence of shot peening on the fatigue behaviour of Ti-alloys. Shot peening (1981), Pergamon Press, Oxford 453-460
8. Turnbull A., de los Rios E.R., Tait R.B., Laurant C., and Boabaid J.S. Improving the fatigue resistance of wasp alloy by shot peening. Fatigue Fract Eng Mater Struct 21 (1998) 1513-1524
9. Ochi Y., Masaki K., Matsumura T., and Sekino T. Effect of shot-peening treatment on high cycle fatigue property of ductile cast iron. Int J Fatigue 23 (2001) 441-448
10. Wang S., Li Y., Yao M., and Wang R. Fatigue limits of shot-peened metals. J Mater Process Technol 73 (1998) 57-63
11. Benedetti M., Fontanari V., Hohn B., Oster P., and Tobie T. Influence of shot peening on bending tooth fatigue limit of case hardened gears. Int J Fatigue 24 (2002) 1127-1136
12. Wagner L., and Lütjering G. Influence of shot peening parameters on the surface layer properties and the fatigue life of Ti-6Al-4V. In: Fuchs H.O. (Ed). Proceedings of 2nd international conference shot peening (1984), American Shot Peening Society, Paramus (NJ) 194-200
13. Luo W., Noble B., and Waterhouse R.B. The effect of shot peening intensity on the fatigue and fretting behaviour of an aluminium alloy. In: Niku-Lari A. (Ed). Advances in surface treatments vol. 2 (1988), Pregamon Press, Oxford 145-153
14. Hanagarth H., Vöhringer O., and Macherauch E. Relaxation of shot peening residual stresses of the steel 42 CrMo 4 by tensile or compressive deformation. In: Iida K. (Ed). Proceedings of international conference shot peening 4, Tokyo, 1990 (1990), The Japan Society of Precision Engineering, Tokyo 337-345
15. Vöhringer O. Relaxation of residual stresses by annealing or mechanical treatment. In: Niku-Lari A. (Ed). Advances in surface treatments vol. 4 (1987), Pergamon press, Oxford 367-396
16. Kodama S. The behaviour of residual stress during fatigue stress cycles. Proceedings of international conference on mechanical behaviours of metals 2 vol. 2 (1972), Society of Material Science, Kyoto 111-118
17. McLung R.C. A literature survey on the stability and significance of residual stresses during fatigue. Fatigue Fract Eng Mater Struct 30 (2007) 173-205
18. Zinn W., and Scholtes B. Mechanical surface treatments of lightweight materials - effects on fatigue strength and near-surface microstructures. J Mater 8 (1999) 145-151
19. Bathias C., Bonnafe J.P., Lebrun J.L., and Maeder G. X-ray diffraction and acoustic emission study of fatigue damage in aluminium alloys. In: Champoux R.L., Underwood J.H., and Kapp J.A. (Eds). Analytical and experimental methods for residual stress effects in fatigue ASTM STP 1004 (1988), American Society for Testing and Materials 25-36
20. Hammond D.W., and Meguid S.A. Crack propagation in the presence of shot-peening residual stresses. Eng Fract Mech 37 (1990) 373-387
21. Potter JM, Millard RA. The effect of temperature and load cycling on the relaxation of residual stresses. In: McMurdie HF, Barrett CS, Mewkirk JB, Ruud CO, editors. Proceedings of the 25th conference on application of X-ray analysis; 1976. p. 309-19.
22. Rasouli Yazdi S, Lu J. Prediction of relaxation of residual stress induced by shot peening in aluminium alloys. In: Proceedings of the SEM annual conference on theoretical, experimental and computational mechanics; 1999. p. 880-3.
23. Özdemir A.T., and Edwards L. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fract Eng Mater Struct 20 (1997) 1443-1451
24. ASM metals handbook, vol. 2; 1990.
25. Noyan I.C., and Cohen J.B. Residual stress measurement by diffraction and interpretation (1987), Springer-Verlag, New York
26. Prevey PS. X-ray diffraction characterisation of residual stresses produced by shot peening. In: Niku-Lari A, editor. Proceedings of IITT-international on shot peening theory and application, Gournay sur Marne, France; 1990. p. 81-93.
27. Dong Y.H., and Scardi P. Marq X - new program for whole powder pattern fitting. J Appl Cryst 33 (2000) 184-189
28. Residual stress measurement by X-ray diffraction-SAE J784a. SAE Information Report, 2nd ed.; 1971.
29. Li J.K., Yao M., Wang D., and Wang R. An analysis of stress concentration caused by shot peening and its application in predicting fatigue strength. Fatigue Fract Eng Mater Struct 15 12 (1992) 1271-1279
30. Fischer Cripps A.C. Introduction to contact mechanics (2000), Springer, Berlin
31. Meininger J.M., Dickerson S.L., and Gibeling J.C. Observations of tension/compression asymmetry in the cyclic deformation of aluminum alloy 7075. Fatigue Fract Eng Mater Struct 19 1 (1996) 85-97
32. Lemaitre J., and Chaboche J.L. Mechanics of solid materials (1990), Cambridge University Press, Cambridge
33. Hirsch T., Vöhringer O., and Macherauch E. Bending fatigue behaviour of differently heat treated and shot peened AlCu5Mg2. In: Niku-Lari A. (Ed). Advances in surface treatments vol. 2 (1988) 91-101
34. Flavenot J.F., and Skalli N. A comparison of multiaxial fatigue criteria incorporating residual stress effects. In: Brown M.W., and Miller K.J. (Eds). Biaxial and multiaxial fatigue (1989), Mechanical Engineering Publications, London 437-457
35. Zhao T., and Jiang Y. Fatigue of 7075-T651 aluminum alloy. Int J Fatigue 30 (2008) 834-849