Internal coating of zirconia restoration with silica-based ceramic improves bonding of resin cement to dental zirconia ceramic

Bio-Medical Materials and Engineering

Volumn 20, Issue 2, 2010, Pages 77-87

  Kitayama, Shuzo ^a   Nikaido, Toru ^a   Ikeda, Masaomi ^a   Alireza, Sadr ^a   Miura, Hiroyuki ^a   Tagami, Junji ^a  

^a TOKYO MEDICAL AND DENTAL UNIVERSITY   (Japan)

Author keywords

internal coating technique; resin cement; silane coupling agent; silica based ceramic; thermal cycling; Zirconia ceramic

Indexed keywords

BOND STRENGTH; CERAMIC SURFACE; CONTROL GROUPS; DENTAL CERAMIC; DENTAL RESTORATIONS; LABORATORY TECHNIQUES; PRE-TREATMENT; RESIN CEMENT; SILANE COUPLING AGENT; SILANIZATIONS; STANDARD METHOD; TENSILE BOND STRENGTH; UNIVERSAL TESTING MACHINES; ZIRCONIA CERAMIC;

BOND STRENGTH (MATERIALS); CEMENTS; CERAMIC MATERIALS; COATING TECHNIQUES; COATINGS; COUPLING AGENTS; DENTAL CEMENT; FILLING; LABORATORIES; RESINS; RESTORATION; SILICA; TENSILE STRENGTH; TENSILE TESTING; THERMAL CYCLING;

ZIRCONIA;

CLEARFIL SE BOND; PANAVIA FLUORO; PANAVIA-FLUORO; RESIN CEMENT; SILANE DERIVATIVE; SILICON DIOXIDE; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; HUMAN; MATERIALS TESTING; METHODOLOGY; TENSILE STRENGTH; TOOTH PROSTHESIS;

DENTAL BONDING; DENTAL PORCELAIN; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; HUMANS; MATERIALS TESTING; RESIN CEMENTS; SILANES; SILICON DIOXIDE; TENSILE STRENGTH; ZIRCONIUM;

EID: 77954719038     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: 10.3233/BME-2010-0617     Document Type: Article

References (28)

1. M.B. Blatz, A. Sadan and M. Kern, Resin-ceramic bonding: a review of the literature, J. Prosthet. Dent. 89 (2003), 268-274.
2. B. Cales, Y. Stefani and E. Lilley, Long-term in vivo and in vitro aging of a zirconia ceramic used in orthopaedy, J. Biomed. Mater. Res. 28 (1994), 619-624.
3. C. Piconi and G. Maccauro, Zirconia as a ceramic biomaterial, Biomaterials 20 (1999), 1-25.
4. P. Christel, A. Meunier, M. Heller, J.P. Torre and C.N. Peille, Mechanical properties and short-term in vivo evaluation of yttrium-oxide- partially-stabilized zirconia, J. Biomed. Mater. Res. 23 (1989), 45-61.
5. F.J. Burke, G.J. Fleming, D. Nathanson and P.M. Marquis, Are adhesive technologies needed to support ceramics? An assessment of the current evidence, J. Adhes. Dent. 4 (2000), 7-22.
6. S.F. Rosenstiel, M.F. Land and B.J. Cripson, Dental luting agents: a review of the current literature, J. Prosthet. Dent. 80 (1998), 280-301.
7. C.P. Ernst, U. Cohnen, E. Stender and B. Willershausen, In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents, J. Prosthet. Dent. 93 (2005), 551-558.
8. M. Ozcan and P.K Vallittu, Effect of surface conditioning methods on the bond strength of luting cement to ceramics, Dent. Mater. 19 (2003), 725-731.
9. S.M. Wegner and M. Kern, Long-term resin bond strength to zirconia ceramic, J. Adhes. Dent. 2 (2000), 139-147.
10. M. Kern and S. Wegner, Bonding to zirconia ceramic: adhesion methods and their durability, Dent. Mater. 14 (1998), 64-71.
11. P. Derand and T. Derand, Bond strength of luting cements to zirconium oxide ceramics, Int. J. Prosthodont. 13 (2000), 131-135.
12. M. Ozcan, H.N. Alkumru and D. Gemalmaz, The effect of surface treatment on the shear bond strength of luting cement to glass-infiltrated alumina ceramic, Int. J. Prosthodont. 14 (2001), 335-339.
13. M.B. Blatz, A. Sadan, J. Martin and B. Lang, In vitro evaluation of shear bond strengths of resin to densely sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling, J. Prosthet. Dent. 91 (2004), 356-362.
14. M. Wolfart, F. Lehmann, S. Wolfart and M. Kern, Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods, Dent. Mater. 23 (2007), 45-50.
15. S. Kitayama, T. Nikaido, R. Maruoka, L. Zhu, M. Ikeda, A. Watanabe, R.M. Foxton, H.Miura and J. Tagami, Effect of an internal coating technique on tensile bond strengths of resin cements to zirconia ceramics, Dent. Mater. J. 28 (2009), 446-453.
16. W. Awliya, A. Oden, P. Yaman, J.B. Dennison and M.E. Razzoog, Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions, Acta Odontol. Scand. 56 (1998), 9-13.
17. C.W. Jennings, Surface roughness and bond strength of adhesives, J. Adhes. 4 (1972), 25-38.
18. M. Blixt, E. Adamczak, L. Linden, A. Oden and K. Arvidson, Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements, Int. J. Prosthodont. 13 (2000), 221-226.
19. M. Kern and V.P. Thompson, Bonding to glass-infiltrated alumina ceramic: adhesive methods and their durability, J. Prosthet. Dent. 73 (1995), 240-249.
20. M.B. Blatz, G. Chiche, S. Holst and A. Sadan, Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia, Quintessence Int. 38 (2007), 745-753.
21. R.C. de Oyagüe, F. Monticelli, M. Toledano, E. Osorio, M. Ferrari and R. Osorio, Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic, Dent. Mater. 25 (2009), 172-179.
22. P.F. Manicone, P. Rossi Iommetti and L. Raffaelli, An overview of zirconia ceramics: basic properties and clinical applications, J. Dent. 35 (2007), 819-826.
23. T. Wada, Development of a new adhesive material and its properties, in: Proceedings of the International Symposium on Adhesive Prosthodontics, L. Gettleman, M.M.A. Vrijhoef and Y. Uchiyama, eds, Academy of Dental Materials, Amsterdam, 1986, pp. 9-18.
24. L.F. Valandro, M. Ozcan, R. Amaral, F.P. Leite and M.A. Bottino, Microtensile bond strength of a resin cement to silicacoated and silanized in-ceram zirconia before and after aging, Int. J. Prosthodont. 20 (2007), 70-72.
25. M. Ozcan, P. Pfeiffer and I. Nergiz, A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry, Quintessence Int. 29 (1998), 713-724.
26. E. Gonzalo, M.J. Suárez, B. Serrano and J.F. Lozano, Marginal fit of zirconia posterior fixed partial dentures, Int. J. Prosthodont. 21 (2008), 398-399.
27. S. Reich, K. Kappe, H. Teschner and J. Schmitt, Clinical fit of four-unit zirconia posterior fixed dental prostheses, Eur. J. Oral. Sci. 116 (2008), 579-584.
28. P. Kohorst, H. Brinkmann, J. Li, L. Borchers and M. Stiesch, Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided design/computer-aided manufacturing systems, Eur. J. Oral. Sci. 117 (2009), 319-325.