Recent developments on damage modeling and finite element analysis for composite laminates: A review

Materials and Design

Volumn 31, Issue 8, 2010, Pages 3825-3834

  Liu, P F ^a   Zheng, J Y ^a  

^a ZHEJIANG UNIVERSITY   (China)

Author keywords

B. Laminates; E. Mechanical; H. Failure analysis

Indexed keywords

CARBON FIBER REINFORCED POLYMER; COMPLEX ENVIRONMENTS; COMPOSITE LAMINATE; CONSTITUTIVE MODELING; DAMAGE AND FAILURE; DAMAGE EVOLUTION; DAMAGE MODELING; DAMAGE TENSORS; E. MECHANICAL; EVOLUTION PROCESS; EXTENDED FINITE ELEMENT METHOD; FAILURE CRITERIA; FAILURE PROCESS; FINITE ELEMENT; FINITE ELEMENT ANALYSIS; FINITE ELEMENT IMPLEMENTATION; FINITE ELEMENT TECHNIQUES; H. FAILURE ANALYSIS; MECHANICAL RESPONSE; MICROSCOPIC DAMAGE; MULTISCALES; NUMERICAL CONVERGENCE; PROGRESSIVE FAILURE ANALYSIS; PROPERTIES OF COMPOSITES; SOLUTION ALGORITHMS; STIFFNESS DEGRADATION; STIFFNESS MATRICES; ULTIMATE LOADS;

BIOLOGY; CARBON FIBERS; CONTINUUM DAMAGE MECHANICS; CONVERGENCE OF NUMERICAL METHODS; DEGRADATION; FINITE ELEMENT METHOD; FRACTURE MECHANICS; LAMINATED COMPOSITES; MECHANICAL PROPERTIES; MECHANISMS; PAPER LAMINATES; POLYMER MATRIX COMPOSITES; QUALITY ASSURANCE; REINFORCED PLASTICS; SAFETY FACTOR; STIFFNESS; STIFFNESS MATRIX; THERMOELECTRICITY;

FAILURE ANALYSIS;

BIOLOGY; CARBON FIBERS; COMPOSITES; CYCLIC LOADS; DEGRADATION; FAILURE; FINITE ELEMENT ANALYSIS; LAMINATES; MECHANICAL PROPERTIES; POLYMERS; QUALITY CONTROL; REACTION MECHANISMS; STIFFNESS;

EID: 77953287371     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.03.031     Document Type: Article

References (120)

1. Cox B.N., Yang Q.D. In quest of virtual tests for structural composites. Science 2006, 314:1102-1107.
2. Young K.S. Advanced composites storage containment for hydrogen. Int J Hydrogen Energy 1992, 17(7):505-507.
3. Chapelle D.D., Perreux D. Optimal design of a Type 3 hydrogen vessel: part I-analytic modelling of the cylindrical section. Int J Hydrogen Energy 2006, 31(5):627-638.
4. Liu P.F., Xu P., Zheng J.Y. Artificial immune system for optimal design of composite hydrogen storage vessel. Comput Mater Sci 2009, 47(1):261-267.
5. Zheng J.Y., Liu P.F. Elasto-plastic stress analysis and burst strength evaluation of Al-carbon fiber/epoxy composite cylindrical laminates. Comput Mater Sci 2008, 42(4):453-461.
6. Xu P., Zheng J.Y., Liu P.F. Finite element analysis of composite hydrogen storage vessel. Mater Des 2009, 31(7):2295-2301.
7. Liu P.F., Zheng J.Y. Review on methodologies of progressive failure analysis of composite laminates. Continuum mechanics 2009, Nova Science Publishers, New York, [chapter 11]. A. Koppel, J. Oja (Eds.).
8. Effendi R.R., Barrau J.J., Guedra-Degeorges D. Failure mechanism analysis under compression loading of unidirectional carbon/epoxy composites using micromechanical modeling. Compos Struct 1995, 31(2):87-98.
9. Phillips E.A., Herakovich C.T., Graham L.L. Damage development in composites with large stress gradients. Compos Sci Technol 2001, 61(5):2169-2182.
10. Bussiba A., Kupiec M., Ifergane S., Piat R., Böhlke T. Damage evolution and fracture events sequence in various composites by acoustic emission technique. Compos Sci Technol 2008, 68(5):1144-1155.
11. Zhang D.X., Ye J.Q., Lam D. Ply cracking and stiffness degradation in cross-ply laminates under biaxial extension, bending and thermal loading. Compos Struct 2006, 75(1-4):121-131.
12. Bouazza M., Tounsi A., Benzair A., Adda-bedia E.A. Effect of transverse cracking on stiffness reduction of hygrothermal aged cross-ply laminates. Mater Des 2007, 28(4):1116-1123.
13. Spootswood M.S., Palazotto A.N. Progressive failure analysis of a composite shell. Compos Struct 2007, 53(1):117-131.
14. Kachanov L.M. Time of the rupture process under creep conditions. IVZ Akad Nauk SSR Otd Tech Nauk 1958, 8:26-31. [in Russian].
15. Tsai S.W., Wu E M. A general theory of strength for anisotropic materials. J Compos Mater 1971, 5(1):58-80.
16. Hoffman O. The brittle strength of orthotropic material. J Compos Mater 1967, 1(2):200-206.
17. Hinton M.J., Soden P.D. Predicting failure in composite laminates: the background to the exercise. Compos Sci Technol 1998, 58(7):1001-1010.
18. Soden P.D., Hinton J.M., Kaddour A.S. A comparison of the predictive capabilities of current failure theories for composite laminates. Compos Sci Technol 1998, 58(7):1225-1254.
19. Theocaris P.S. Weighing failure tensor polynomial criteria for composites. Int J Damage Mech 1992, 1(1):4-46.
20. Rotem A., Hashin Z. Failure modes of angle ply laminates. J Compos Mater 1975, 9(2):191-206.
21. Narayanaswami R., Adelman H.M. Evaluation of the tensor polynomial and Hoffman strength theories for composite materials. J Compos Mater 1977, 11(4):366-377.
22. Hashin Z. Failure criteria for unidirectional fiber composites. J Appl Mech 1980, 47:329-334.
23. Yamada S.E., Sun C.T. Analysis of laminated strength and its distribution. J Compos Mater 1978, 12:275-284.
24. Zhang Y.X., Yang C.H. Recent developments in finite element analysis for laminated composite plates. Compos Struct 2009, 88(1):147-157.
25. Orifici A.C., Herszberg I., Thomson R.S. Review of methodologies for composite material modelling incorporating failure. Compos Struct 2008, 86(1-3):194-210.
26. Lemaitre J., Chaboche J.L. Mechanics of solid materials 1990, Cambridge University Press, Cambridge.
27. Lemaitre J. A course on damage mechanics 1992, Springer-Verlag, Berlin.
28. Ristinmaa M., Ottosen N.S. Viscoplasticity based on an additive split of the conjugated forces. Euro J Mech A - Solids 1998, 17(2):207-235.
29. Schapery R.A. A theory of mechanical behavior of elastic media with growing damage and other changes in structure. J Mech Phys Solids 1990, 38(2):215-253.
30. Murakami S., Kamiya K. Constitutive and damage evolution equations of elastic-brittle materials based on irreversible thermodynamics. Int J Mech Sci 1997, 39(4):473-486.
31. Hayakawa K., Murakami S., Liu Y. An irreversible thermodynamics theory for elastic-plastic-damage materials. Euro J Mech A - Solids 1998, 17(1):13-32.
32. Tang X.S., Jiang C.P., Zheng J.L. Anisotropic elastic constitutive relations for damaged materials by application of irreversible thermodynamics. Theor Appl Fract Mech 2002, 38(3):211-220.
33. Brünig M. An anisotropic ductile damage model based on irreversible thermodynamics. Int J Plast 2003, 19(10):1679-1713.
34. Olsson M., Ristinmaa M. Damage evolution in elasto-plastic materials response due to different concepts. Int J Damage Mech 2003, 12(2):115-139.
35. Basu S., Waas A.M., Ambur R.D. Prediction of progressive failure in multidirectional composite laminated panels. Int J Solids Struct 2007, 44(9):2648-2676.
36. Maimí P., Camanho P.P., Mayugo J.A. A continuum damage model for composite laminates: part I - constitutive model. Mech Mater 2007, 39(10):897-908.
37. Maimí P., Camanho P.P., Mayugo J.A. A continuum damage model for composite laminates: part II - computational implementation and validation. Mech Mater 2007, 39(10):909-919.
38. Matzenmiller A., Lubliner J., Taylor R.L. A constitutive model for anisotropic damage in fiber-composites. Mech Mater 1995, 20(2):125-152.
39. Kwon Y.W., Liu C.T. Study of damage evolution in composites using damage mechanics and micromechanics. Compos Struct 1997, 38(1-4):133-139.
40. Schipperen J.H.A. An anisotropic damage model for the description of transverse matrix cracking in a graphite-epoxy laminate. Compos Struct 2001, 53(3):295-299.
41. Maa R.H., Cheng J.H. A CDM-based failure model for predicting strength of notched composite laminates. Composites Part B 2002, 33(6):479-489.
42. Camanho P.P., Maimí P., Dávila C.G. Prediction of size effects in notched laminates using continuum damage mechanics. Compos Sci Technol 2007, 67(13):2715-2727.
43. Barbero E.J., Vivo L.D. A constitutive model for elastic damage in fiber-reinforced PMC laminae. Int J Damage Mech 2001, 10(1):73-93.
44. Perreux D., Thiebaud F. Damaged elasto-plastic behaviour of [+φ,-φ] fibre-reinforced composite laminates in biaxial loading. Compos Sci Technol 1995, 54(3):275-285.
45. Ferry L., Perreux D., Rousseau J., Richard F. Interaction between plasticity and damage in the behaviour of [+φ,-φ] fibre reinforced composite pipes in biaxial loading (internal pressure and tension). Composites Part B 1998, 29(6):715-723.
46. Perreux D., Robinet D., Chapelle D. The effect of internal stress on the identification of the mechanical behaviour of composite pipes. Compos Part A 2006, 37(4):630-635.
47. Liu P.F., Zheng J.Y. Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics. Mater Sci Eng A 2008, 485(1-2):711-717.
48. Chow C.L., Yang F. Three-dimensional inelastic stress analysis of center notched composite laminates with damage. Int J Damage Mech 1997, 6(1):23-50.
49. Lin W.P., Hu H.T. Nonlinear analysis of fiber-reinforced composite laminates subjected to uniaxial tensile load. J Compos Mater 2002, 36(12):1429-1450.
50. Boutaous A., Peseux B., Gornet L., Bélaidi A. A new modeling of plasticity coupled with the damage and identification for carbon fibre composite laminates. Compos Struct 2006, 74(1):1-9.
51. Barbero E.J. An inelastic damage model for fiber reinforced laminates. J Compos Mater 2002, 36(8):, 941-962.
52. Reddy Y.S.N., Pandey A.K. A first-ply failure analysis of composite laminates. Comput Struct 1987, 25(3):371-393.
53. Tay T.E., Liu G., Tan V.B.C., Sun X.S., Pham D.C. Progressive failure analysis of composites. J Compos Mater 2008, 42(18):1921-1966.
54. Davila C.G., Camanho P.P., Rose C.A. Failure criteria for FRP laminates. J Compos Mater 2005, 39(4):323-345.
55. Sleight DW. Progressive failure analysis methodology for laminated composite structures. NASA report; 1999. p. 48-63.
56. Wu R.Y., Stachurski Z. Evaluation of the normal stress interaction parameter in the tensor polynomial strength theory for anisotropic materials. J Compos Mater 1984, 18(5):456-463.
57. Cuntze R.G., Freund A. The predictive capability of failure mode concept-based strength criteria for multidirectional laminates. Compos Sci Technol 2004, 64(3-4):343-377.
58. Padhi G.S., Shenoi R.A., Moy S.S.J., Hawkins G.L. Progressive failure and ultimate collapse of laminated composite plates in bending. Compos Struct 1997, 40(3-4):277-291.
59. Tay T.E., Tan S.H.N., Tan V.B.C., Gosse J.H. Damage progression by the element-failure method (EFM) and strain invariant failure theory (SIFT). Compos Sci Technol 2005, 65(6):935-944.
60. Tay T.E., Liu G., Yudhanto A., Tan V.B.C. A micro-macro approach to modeling progressive damage in composite structures. Int J Damage Mech 2008, 17(1):5-28.
61. Li R., Kelly D., Ness R. Application of a first invariant strain criterion for matrix failure in composite materials. J Compos Mater 2003, 37(22):1977-2000.
62. Mayes J.S., Hansen A.C. Composite laminate failure analysis using multicontinuum theory. Compos Sci Technol 2004, 64(3-4):379-394.
63. Mayes J.S., Hansen A.C. A comparison of multicontinuum theory based failure simulation with experimental results. Compos Sci Technol 2004, 64(3-4):517-527.
64. Zhu H., Sankar B.V., Marrey R.V. Evaluation of failure criteria for fiber composites using finite element micromechanics. J Compos Mater 1998, 32(8):766-782.
65. Ha S.K., Jin K.K., Huang Y. Micro-mechanics of failure (MMF) for continuous fiber reinforced composites. J Compos Mater 2008, 42(18):1873-1895.
66. Rice J.R. A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 1968, 35(2):379-386.
67. Rybicki E.F., Kanninen M.F. A finite element calculation of stress intensity factors by a modified crack closure integral. Eng Fract Mech 1977, 9(4):931-938.
68. Rybicki E.F. An energy release rate approach for stable crack growth in the free-edge delamination problem. J Compos Mater 1977, 11(4):470-487.
69. Irwin G.R. Fracture dynamics, fracturing of metals 1948, vol. 8. American Society for Metals, Cleveland, p. 147-66.
70. Krueger R. Virtual crack closure technique: history, approach, and applications. Appl Mech Rev 2004, 57(2):109-143.
71. Xie D., Biggers S.B. Progressive crack growth analysis using interface element based on the virtual crack closure technique. Finite Elem Anal Des 2006, 42(11):977-984.
72. Leski A. Implementation of the virtual crack closure technique in engineering FE calculations. Finite Elem Anal Des 2007, 43(3):261-268.
73. Orifici A.C., Thomson R.S., Degenhardt R., Bisagni C., Bayandor J. A finite element methodology for analysing degradation and collapse in postbuckling composite aerospace structures. J Compos Mater 2009, 43:3239-3263.
74. Dugdale D.S. Yielding of steel sheets containing slits. J Mech Phys Solids 1960, 8(2):100-104.
75. Barenblatt I. Mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 1962, 7:55-129.
76. Hutchinson J.W., Suo Z. Mixed mode cracking in layered materials. Adv Appl Mech 1992, 29:63-191.
77. Tvergaard V., Hutchinson J.W. Effect of strain-dependent cohesive zone model on predictions of crack growth resistance. Int J Solids Struct 1996, 33(20-22):3297-3308.
78. Allen D.H., Searcy C.R. Numerical aspects of a micromechanical model of a cohesive zone. J Reinf Plast Compos 2000, 19(3):240-248.
79. Camanho P.P., Davila C.G., Moura M.F. Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater 2003, 37(16):1415-1438.
80. Xie D., Waas A.M. Discrete cohesive zone model for mixed-mode fracture using finite element analysis. Eng Fract Mech 2006, 73(13):1783-1796.
81. Turon A., Dávila C.G., Camanho P.P., Costa J. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng Fract Mech 2007, 74(10):1665-1682.
82. Sun C.T., Jin Z.H. Modeling of composite fracture using cohesive zone and bridging models. Compos Sci Technol 2006, 66(10):1297-1302.
83. Bao G., Suo Z. Remarks on crack-bridging concepts. Appl Mech Rev 1992, 45:355-366.
84. Clegg W.J. Controlling cracks in ceramics. Science 1999, 286:1097-1099.
85. Kruzic J.J. Predicting fatigue failures. Science 2009, 325:156-158.
86. Cox B.N., Yang Q.D. Cohesive models for damage evolution in laminated composites. Int J Fract 2005, 133(2):107-137.
87. Shin C.S., Wang C.M. An improved cohesive zone model for residual notched strength prediction of composite laminates with different orthotropic lay-ups. J Compos Mater 2004, 38(9):713-736.
88. Lapczyk I., Hurtado J.A. Progressive damage modeling in fiber-reinforced materials. Composites Part A 2007, 38(1):2333-2341.
89. Rami H.A. Cohesive micromechanics: a new approach for progressive damage modeling in laminated composites. Int J Damage Mech 2009, 18(8):691-719.
90. Ochoa O., Reddy J.N. Finite element analysis of composite laminates 1992, Kluwer Academic Publishers, Dordrecht.
91. Duvaut G., Lions J.L. Inequalities in mechanics and physics 1976, Springer, Berlin.
92. Gao Y.F., Bower A.F. A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces. Model Simul Mater Sci Eng 2004, 12(3):453-463.
93. Xu X.P., Needleman A. Numerical simulations of fast crack growth in brittle solids. J Mech Phys Solids 1994, 42(9):1397-1434.
94. Riks E. An incremental approach to the solution of snapping and buckling problems. Int J Solids Struct 1979, 15(7):529-551.
95. Ramm E. Strategies for tracing the nonlinear response near limit points. Nonlinear finite element analysis in structural mechanics 1981, Springer-Verlag, New York.
96. Crisfield M.A. An arc-length method including line searches and accelerations. Int J Numer Meth Eng 1983, 19(8):1269-1289.
97. Germain N., Besson J., Feyel F. Composite layered materials: anisotropic nonlocal damage models. Comput Meth Appl Mech Eng 2007, 41-44(196):4272-4282.
98. Drabek T., Böhm H.J. Micromechanical finite element analysis of metal matrix composites using nonlocal ductile failure models. Compos Mater Sci 2006, 37(1-2):29-36.
99. Huang Z.M. Inelastic and failure analysis of laminate structures by ABAQUS incorporated with a general constitutive relationship. J Reinf Plast Compos 2007, 26(11):1135-1181.
100. Huang Z.M. Failure analysis of laminated structures by FEM based on nonlinear constitutive relationship. Compos Struct 2007, 77(3):270-279.
101. Fredriksson P., Gudmundson P., Mikkelsen L.P. Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites. Int J Solids Struct 2009, 46(22-23):3977-3987.
102. Hibbit, Karlsson, Sorensen. ABAQUS user's manual. Version 6.8; 2007.
103. Swanson J. ANSYS user's manual. Version 11.0; 2007.
104. Reddy Y.S.N. Non-linear progressive failure analysis of laminated composite plates. Int J Non-linear Mech 1995, 30(5):629-649.
105. Akhras G., Li W.C. Progressive failure analysis of thick composite plates using the spline finite strip method. Compos Struct 2007, 79(1):34-43.
106. Bednarcyk BA, Arnold SM. A framework for performing multiscale stochastic progressive failure analysis of composite structures. In: 2006 ABAQUS users' conference.
107. Laurin F., Carre're N., Maire J.F. A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models. Composites Part A 2007, 38(1):198-209.
108. Van Der Meer F.P., Sluys L.J. Continuum models for the analysis of progressive failure in composite laminates. J Compos Mater 2009, 43(20):2131-2156.
109. Pineda E.J., Waas A.M., Bednarcyk B.A., Collier C.S., Yarrington P. Progressive damage and failure modeling in notched laminated fiber reinforced composites. Int J Fract 2009, 158(2):125-143.
110. Robbins D.H., Reddy J.N. Adaptive hierarchical kinematics in modeling progressive damage and global failure in fiber-reinforced composite laminates. J Compos Mater 2008, 42(2):143-172.
111. Belytschko T., Black T. Elastic crack growth in finite elements with minimal remeshing. Int J Numer Meth Eng 1999, 45(5):601-620.
112. Moës N., Dolbow J., Belytschko T. A finite element method for crack growth without remeshing. Int J Numer Meth Eng 1999, 46(1):131-150.
113. Moës N., Belytschko T. Extended finite element method for cohesive crack growth. Eng Fract Mech 2002, 69(7):813-833.
114. John Dolbow, Nicolas Moës, Ted Belytschko Discontinuous enrichment in finite elements with a partition of unity method. Finite Elem Anal Des 2000, 36(3-4):235-260.
115. Abdelaziz Y., Hamouine A. A survey of the extended finite element. Comput Struct 2008, 86(11-12):1141-1151.
116. Guidault P.A., Allix O., Champaney L., Cornuault C. A multiscale extended finite element method for crack propagation. Comput Meth Appl Mech Eng 2008, 197(5):381-399.
117. Nistor I., Pantalé O., Caperaa S. Numerical implementation of the extended finite element method for dynamic crack analysis. Adv Eng Software 2008, 39(7):573-587.
118. Giner E., Sukumar N., Tarancón J.E., Fuenmayor F.J. An Abaqus implementation of the extended finite element method. Eng Fract Mech 2009, 76(3):347-368.
119. Yan Y.H., Park S.H. An extended finite element method for modeling near-interfacial crack propagation in a layered structure. Int J Solids Struct 2008, 45(17):4756-4765.
120. Huynh D.B.P., Belytschko T. The extended finite element method for fracture in composite materials. Int J Numer Meth Eng 2009, 77(2):214-239.