Micro-mechanics of Failure (MMF) for continuous fiber reinforced composites

Journal of Composite Materials

Volumn 42, Issue 18, 2008, Pages 1873-1895

  Ha, Sung Kyu ^a   Jin, Kyo Kook ^a   Huang, Yuanchen ^a  

^a Hanyang University   (South Korea)

Author keywords

Constituent failure; Failure criterion; Failure envelope; Micromechanics; Unidirectional composites

Indexed keywords

COMPRESSIVE STRENGTH; FAILURE (MECHANICAL); FIBER OPTICS; FIBER REINFORCED PLASTICS; FIBERS; FORECASTING; ICE; SPEED; STRENGTH OF MATERIALS; STRESSES;

COMPRESSIVE FAILURES; CONSTITUENT FAILURE; CONTINUOUS FIBER; DAMAGE PROGRESSION; EXPERIMENTAL DATA; FAILURE CRITERIA; FAILURE CRITERION; FAILURE ENVELOPE; FAILURE INITIATION; FAILURE THEORIES; FIBER-MATRIX INTERFACES; GENERIC THEORY; GLASS/EPOXY; HEXAGONAL ARRAYS; INITIAL FAILURE; LONGITUDINAL SHEAR; MATRIX FAILURES; MICRO STRESSES; MICROMECHANICAL APPROACH; MICROMECHANICS; STRENGTH PROPERTIES; TENSILE FAILURES; TRANSVERSE TENSILE; UNIDIRECTIONAL COMPOSITES; UNIT CELLS;

MATRIX ALGEBRA;

EID: 49649088585     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998308093911     Document Type: Article

References (49)

1. Azzi, V.D. and Tsai, S.W. (1965). Anisotropic Strength of Composites, Experimental Mechanics, 5: 283-288.
2. Tsai, S.W. (1965). Strength Characteristics of Composite Materials, NASA Contractor Report, CR-224, National Aeronautics and Space Administration.
3. Tsai, S.W. and Wu, E.M. (1971). A General Theory of Strength for Anisotropic Materials, Journal of Composite Materials, 5: 58-80.
4. Hashin, Z. and Rotem, A. (1973). A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, 7: 448-464.
5. Hashin, Z. (1980). Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, 47: 329-334.
6. Yamada, S.E. and Sun, C.T. (1978). Analysis of Laminate Strength and Its Distribution, Journal of Composite Materials, 12: 275-284.
7. Chang, F.K., Scott, R.A. and Springer, G.S. (1984). Failure of Composite Laminates Containing Pin Loaded Holes - Method of Solution, Journal of Composite Materials, 18: 255-278.
8. Chang, F.K., Scott, R.A. and Springer, G.S. (1984). Failure Strength of Nonlinearly Elastic Composite Laminates Containing Pin Loaded Holes - Method of Solution, Journal of Composite Materials, 18: 464-477.
9. Chang, F.K. and Chang, K.Y. (1987). A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, 21: 834-855.
10. Hart-Smith, L.J. (1989). A New Approach to Fibrous Composite Laminate Strength Prediction. Eighth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, NASA CP-3087, Part 2: 663-693.
11. Feng, W.W. (1991). A Failure Criterion for Composite Materials. Journal of Composite Materials, 25: 88-100.
12. Pang, S., Pandian, A. and Bradshaw, R.D. (1992). Modified Tsai-Wu Failure Criterion for Fiber-Reinforced Composite Laminates, Polymer Composites, 13 (4). 273-277.
13. Shahid, I. and Chang, F.K. (1993). Failure and Strength of Laminated Composite Plates under Multiple In-Plane Loads, 38th International SAMPE Symposium, pp. 967-977.
14. Shahid, I. and Chang, F.K. (1995). An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates, Journal of Composite Materials, 29 (7). 926-981.
15. Chandler, H.D., Campbell, I.M.D. and Stone, M.A. (1995). An Assessment of Failure Criteria for Fiber Reinforced Composite Laminates. International Journal of Fatigue, 17 (7). 513-518.
16. Christensen, R.M. (1997). Stress based Yield/Failure Criteria for Fiber Composites, International Journal of Solids and Structures, 34 (5). 529-543.
17. Deng, S. and Ye, L. (1999). Influence of Fiber-matrix Adhesion on Mechanical Properties of Graphite/Epoxy Composites I. Tensile, Flexure, and Fatigue Properties, Journal of Reinforced Plastics and Composites, 18: 1021-1040.
18. Deng, S. and Ye, L. (1999). Influence of Fiber-matrix Adhesion on Mechanical Properties of Graphite/Epoxy Composites: II. Interlaminar Fracture and Inplane Shear Behavior, Journal of Reinforced Plastics and Composites, 18: 1041-1057.
19. Deng, S. and Ye, L. (1999). Influence of Fiber-matrix Adhesion on Mechanical Properties of Graphite/Epoxy Composites: III. Impact and Dynamic Mechanical Properties, Journal of Reinforced Plastics and Composites, 19: 689-703.
20. Kim, K.Y. and Ye, L. (2005). Influence of Matrix and Interface on Transverse Mechanical Properties of CF-PEI Thermoplastic Composites at Elevated Temperatures, Journal of Reinforced Plastics and Composites, 24: 429-445.
21. Hobbiebrunken, T., Hojo, M., Adachi, T., Jong, C.D. and Fiedler, B. (2006). Evaluation of Interfacial Strength in CF/Epoxies using FEM and In-Situ Experiments, Composites Part A: Applied Science and Manufacturing, 37 (12). 2248-2256.
22. Puck, A. and Schrmann, H. (1998). Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Composites Science and Technology, 58 (7). 1045-1067.
23. Puck, A. and Schrmann, H. (2002). Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Composites Science and Technology, 62 (12-13). 1633-1662.
24. Mayes, J.S. (1999). Micromechanics Based Failure Analysis of Composite Structural Laminates, Carderock Division, Naval Surface Warfare Center, Ship Structures and Materials Department, NSWCCD-65-TR-1999/15.
25. Mayes, J.S. and Hansen, A.C. (2004). A Comparison of Multicontinuum Theory based Failure Simulation with Experimental Results, Composites Science and Technology, 64 (3-4). 517-527.
26. Chaboche, J.-L. and Carrre, N. (2002). Multiscale Structural Analyses Incorporating Damage Mechanics at the Meso- or Micro-Scales, International Symposium on Anisotropic Behavior of Damaged Materials, ABDM-2002, Poland, September 9-22.
27. Laurin, F., Carrre, N. and Maire, J.-F. (2007). A Multiscale Progressive Failure Approach for Composite Laminates Based on Thermodynamical Viscoelastic and Damage Models, Composites Part A: Applied Science and Manufacturing, 38 (1). 198-209.
28. Hinton, M.J. and Soden, P.D. (1998). Predicting Failure in Composite Laminates: the Background to the Exercise, Composites Science and Technology, 58 (7). 1001-1010.
29. Soden, P.D., Hinton, M.J. and Kaddour, A.S. (1998). Lamina Properties, Lay-Up Configurations and Loading Conditions for a Range of Fiber-Reinforced Composite Laminates, Composites Science and Technology, 58 (7). 1011-1022.
30. Soden, P.D., Hinton, M.J. and Kaddour, A.S. (1998). A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Composites Science and Technology, 58 (7). 1225-1254.
31. Hinton, M.J., Kaddour, A.S. and Soden, P.D. (2002). Evaluation of Failure Prediction in Composite Laminates: Background to 'Part B' of the Exercise, Composites Science and Technology, 62 (12-13). 1481-1488.
32. Soden, P.D., Hinton, M.J. and Kaddour, A.S. (2002). Biaxial Test Results for Strength and Deformation of a Range of E-Glass and Carbon Fiber Reinforced Composite Laminates: Failure Exercise Benchmark Data, Composites Science and Technology, 62 (12-13). 1489-1514.
33. Hinton, M.J., Kaddour, A.S. and Soden, P.D. (2002). A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Judged against Experimental Evidence, Composites Science and Technology, 62 (12-13). 1725-1797.
34. Hinton, M.J., Kaddour, A.S. and Soden, P.D. (2004). Evaluation of Failure Prediction in Composite Laminates: Background to 'Part C' of the Exercise, Composites Science and Technology, 64 (3-4). 321-327.
35. Kaddour, A.S., Hinton, M.J. and Soden, P.D. (2004). A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates: Additional Contributions, Composites Science and Technology, 64 (3-4). 449-476.
36. Hinton, M.J., Kaddour, A.S. and Soden, P.D. (2004). A Further Assessment of the Predictive Capabilities of Current Failure Theories for Composite Laminates: Comparison with Experimental Evidence, Composites Science and Technology, 64 (3-4). 549-588.
37. Soden, P.D., Kaddour, A.S. and Hinton, M.J. (2004). Recommendations for Designers and Researchers Resulting from the World-Wide Failure Exercise, Composites Science and Technology, 64 (3-4). 589-604.
38. Miyano, Y., Nakata, M. and Sekine, N. (2005). Accelerated Testing for Long-Term Durability of FRP Laminates for Marine Use, Journal of Composite Materials, 39: 5-20.
39. Miyano, Y., Nakada, M. and Cai, H. (2008). Formulation of Long-Term Creep and Fatigue Strengths of Polymer Composites based on Accelerated Testing Methodology, Journal of Composite Materials (In print).
40. Jin, K.K., Huang, Y., Lee, Y.H. and Ha, S.K. (2008). Distribution of Micro Stresses and Interfacial Tractions in Unidirectional Composites, Journal of Composite Materials (In print).
41. Altenbach, H. and Tushtev, K. (2001). A New Static Failure Criterion for Isotropic Polymers, Mechanics of Composite Materials, 37 (5-6). 475-482.
42. Bowden, P.B. and Jukes, J.A. (1972). The Plastic Flow of Isotropic Polymers, Journal of Material Science, 7: 52-63.
43. Raghava, R.S., Caddell, R.M. and Yeh, G.S.Y. (1973). The Macroscopic Yield Behavior of Polymers, Journal of Material Science, 8: 225-232.
44. Bauwens, J.C. (1970). Yield Condition and Propagation of Lders' Lines in Tension-Torsion Experiments on Poly(Vinyl Chloride), Journal of Polymer Science Part A-2: Polymer Physics, 8 (6). 893-901.
45. Camanho, P.P., Davila, C.G. and Ambur, D.R. (2001). Numerical Simulation of Delamination Growth in Composite Materials. NASA-TP-211041.
46. Defining the Constitutive Response of Cohesive Elements Using a Traction-Separation Description, Abaqus Analysis User's Manual, Abaqus Version 6.7 Documentation.
47. Totry, E., Gonzalez, C. and LLorca, J. (2008). Failure Locus of Fiber-Reinforced Composites under Transverse Compression and Out-of-Plane Shear, Composites Science and Technology, 68 (3-4). 829-839.
48. Cuntze, R.G. and Freund, A. (2004). The Predictive Capability of Failure Mode Concept-Based Strength Criteria for Multidirectional Laminates, Composites Science and Technology, 64 (3-4). 343-377.
49. Personal communication with Prof. Miyano, Y. in Kanazawa Institute of Technology, Japan.