Review of methodologies for composite material modelling incorporating failure

Composite Structures

Volumn 86, Issue 1-3, 2008, Pages 194-210

  Orifici, A C ^a,b   Herszberg, I ^b   Thomson, R S ^b  

^a RMIT UNIVERSITY   (Australia)

^b Cooperative Research Centre for Advanced Composite Structures ^*  (Australia)

Author keywords

Constitutive modelling; Damage; Dissipated energy density; Failure theories; Material characterisation

Indexed keywords

COMPOSITE MATERIALS; COMPOSITE MICROMECHANICS; FAILURE (MECHANICAL); MATHEMATICAL MODELS; PIGMENTS; STRUCTURE (COMPOSITION);

ADVANCED COMPOSITE MATERIALS; ADVANCED COMPOSITE STRUCTURES; APPLIED (CO); CHARACTERISATION; COLLABORATIVE PROJECTS; COMPOSITE FAILURES; CONSTITUTIVE MODELLING; CRITICAL REVIEW; DATA DRIVEN (DD); DIFFERENT LENGTH SCALES; DISSIPATED ENERGY DENSITY; ELSEVIER (CO); MATERIAL MODELLING; MECHANICAL BEHAVIOURS; STATE OF THE ARTS; STRUCTURAL EFFICIENCIES; TESTING MACHINES;

COMPOSITE STRUCTURES;

COMPOSITE PROPERTY; DAMAGE; FAILURE ANALYSIS; MATHEMATICAL MODEL; TESTING;

EID: 46749125702     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2008.03.007     Document Type: Article

References (89)

1. Mast P.W., Nash G.E., Michopoulos J.G., Thomas R., Badaliance R., and Wolock I. Characterization of strain-induced damage in composites based on the dissipated energy density: part I to III. Theor Appl Fract Mech 22 (1995) 71-125
2. Michopoulos JG, Badaliance R, Chwastyk T, Gause L, Mast P. Effects of computational technology on composite materials research: the case of the dissipated energy density. In: Proceedings of the first hellenic conference on composite materials and structures, Greece; 2-5 July, 1997.
3. Michopoulos JG. Mechatronically automated characterization of material constitutive response. In: Computational mechanics WCCM VI in conjunction with APCOM'04, 5-10 September, Beijing, China; 2004.
4. Ochoa O.O., and Reddy J.N. Finite element analysis of composite laminates (1992), Kluwer Academic Publishers, Dordrecht, The Netherlands
5. Galiotis C., and Paipetis A. Interfacial damage modelling of composites. In: Soutis C., and Beaumont P.W.R. (Eds). Multi-scale modelling of composite material systems (2005), Woodhead Publishing Limited, Cambridge, England
6. In: Baker A.A., Dutton S., and Kelly D.W. (Eds). Composite materials for aerospace structures. 2nd ed. (2004), AIAA, VA, USA
7. Furukawa T., and Yagawa G. Implicit constitutive modelling for viscoplasticity using neural networks. Int J Numer Meth Eng 43 (1998) 195-219
8. Hashash Y.M.A., Jung S., and Ghaboussi J. Numerical implementation of a neural network based material model in finite element analysis. Int J Numer Meth Eng 59 (2004) 989-1005
9. Man H., Furukawa T., Hoffman M., and Imlao S. An indirect implicit technique for modelling piezoelectric ceramics. Comput Mater Sci (2008) 10.1016/jcommatsci.2008.01.008
10. Ghaboussi J., Pecknold D.A., Zhang M., and Haj-Ali R.M. Autoprogressive training of neural network constitutive models. Int J Numer Meth Eng 42 (1998) 105-126
11. Haj-Ali RM, Kim H-K. Nonlinear constitutive models for FRP composites using artificial neural networks. Mech Mater 2007. doi:10.1016/j.mechmat.2007.05.004.
12. Huang H., Springer G.S., and Christensen R.M. Predicting failure in composite laminates using dissipated energy. J Compos Mater 37 23 (2006) 2073-2099
13. Banks-Sills L. Application of the finite element method to linear elastic fracture mechanics. Appl Mech Rev 44 (1991) 447-461
14. Rybicki E.F., and Kanninen M.F. A finite element calculation of stress intensity factors by a modified crack closure integral. Eng Fract Mech 9 (1977) 931-938
15. Davidson B.D., Hu H., and Hongwei Y. An efficient procedure for determining mixed-mode energy release rates in practical problems of delamination. Finite Element Anal Des 23 (1996) 193-210
16. Furukawa T., and Michopoulos J.G. Computational design of multiaxial tests for anisotropic material characterization. Int J Numer Meth Eng (2007) 10.1002/nme.2243
17. Furukawa T., and Michopoulos J.G. Online planning of multiaxial loading path for elastic material identification. Comput Meth Appl Mech Eng 197 (2008) 885-901
18. Dávila CG, Camanho PP. Failure criteria for FRP laminates in plane stress. NASA/TM-2003-212663. VA, USA: NASA Langley Research Center; 2003.
19. Hashin Z. Failure criteria for unidirectional composites. J Appl Mech 47 (1980) 329-334
20. Chang F.-K., and Chang K.-Y. A progressive damage model for laminated composites containing stress concentrations. J Compos Mater 21 (1987) 834-855
21. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 58 (1998) 1045-1067
22. Pinho ST, Dávila CG, Camanho PP, Iannucci L, Robinson P. Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity. NASA/TM-2005-213530. VA, USA: NASA Langley Research Center; 2005.
23. Hashin Z., and Rotem A. A fatigue failure criterion for fiber reinforced materials. J Compos Mater 7 (1973) 448-464
24. Cuntze R.G., and Freund A. The predictive capability of failure mode concept-based strength criteria for multidirectional laminates. Compos Sci Technol 64 (2004) 344-377
25. Chang F.-K., and Lessard L.B. Damage tolerance of laminated composites containing an open hole and subject to compressive loadings: part I - analysis. J Compos Mater 25 (1991) 2-43
26. Goyal V.K., Johnson E.R., and Dávila C.G. Irreversible constitutive law for modelling the delamination process using interfacial surface discontinuities. Compos Struct 65 3-4 (2004) 289-305
27. Tsai S.W., and Wu E.M. A general theory of strength for anisotropic materials. J Compos Mater 5 (1971) 58-80
28. Hinton M.J., Kaddour A.S., and Soden P.D. Failure criteria in fibre reinforced polymer composites (2004), Elsevier, Amsterdam, The Netherlands
29. Wisnom MR, Hill GFJ, Jones MI. Through thickness failure prediction of composite structural elements. In: Proceedings of the 13th international conference on composite materials, Beijing, China. Paper no. 1623; 2001.
30. Camanho PP, Dávila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. NASA/TM-2002-211737. VA, USA: NASA Langley Research Center; 2002.
31. O'Brien T.K. Interlaminar fracture toughness: the long and winding road to standardization. Composites: Part B 29 (1998) 57-62
32. Talreja R. Damage mechanics of composite materials. Composite materials series vol. 9 (1994), Elsevier Science Ltd., Oxford, UK
33. Hart-Smith L.J. Predictions of the original and truncated maximum-strain failure models for certain fibrous composite laminates. Compos Sci Technol 58 (1998) 1151-1178
34. Bruno D., and Greco F. Mixed mode delamination in plates: a refined approach. Int J Solid Struct 38 (2001) 9149-9177
35. Wang J.T., and Qiao P. On the energy release rate and mode mix of delaminated shear deformable composite plates. Int J Solid Struct 41 (2004) 2757-2779
36. Orifici AC. Degradation models for the collapse analysis of composite aerospace structures. PhD thesis. Royal Melbourne Institute of Technology; 2007.
37. VCCT for ABAQUS User's Manual, Version 1.1; 2005. Rhode Island, USA: ABAQUS Inc.
38. Marc User Manuals Version 2007r1; 2007. Santa Ana (CA): MSC.Software Corporation.
39. Spearing M.S., Lagacé P.A., and McManus H.L.N. On the role of lengthscale in the prediction of failure of composite structures: Assessment and needs. Appl Compos Mater 5 (1998) 139-149
40. Hinton MJ, Kaddour AS. The second world-wide failure exercise: Benchmarking of failure criteria under triaxial stresses for fibre-reinforced polymer composites. In: Proceedings of the 16th international conference on composite materials; 8-13 July, 2007, Kyoto, Japan.
41. Kaddour AS, Hinton MJ, Li S, Smith PA. Damage theories for fibre-reinforced polymer composites: the third world-wide failure exercise (WWFE-III). In: Proceedings of the 16th international conference on composite materials; 8-13 July, 2007, Kyoto, Japan.
42. Michopoulos J.G. On the reducibility of failure theories for composite materials and structures. Compos Struct (2008) 10.1016/j.compstruct.2008.03.008
43. Greszczuk LB. Microbuckling of lamina-reinforced composites. Composite materials: testing and design (third conference). ASTM STP, vol. 546. American Society for Testing and Materials; 1974. p. 5-29.
44. Maimì P., Camanho P.P., Mayugo J.A., and Dávila C.G. A continuum damage model for composite laminates: part I - constitutive model. Mech Mater 39 (2007) 897-908
45. Lee J.D. Three dimensional finite element analysis of damage accumulation in composite laminate. Comput Struct 15 33 (1982) 335-350
46. Christensen R.M. Stress based yield/failure criteria for fiber composites. Int J Solid Struct 34 5 (1997) 529-543
47. Ladeveze P., and Le Dantec E. Damage modelling of the elementary ply for laminated composites. Compos Sci Technol 43 (1992) 257-267
48. Shahid I., and Chang F.-K. An accumulative damage model for tensile and shear failures of laminated composite plates. J Compos Mater 29 7 (1995) 926-981
49. Gosse JH, Christensen S. Strain invariant failure criteria for polymers in composite materials. AIAA Paper. AIAA-2001-1184; 2001.
50. Sandhu RS. Ultimate strength analysis of symmetric laminates, AFFDL-TR-73-137, AD 779927, OH: Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base; 1974.
51. Yamada S.E., and Sun C.T. Analysis of laminate strength and its distribution. J Compos Mater 12 (1978) 275-284
52. Christensen R.M. Tensor transformations and failure criteria for the analysis of fiber composite materials. J Compos Mater 22 (1988) 874-897
53. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc Royal Soc London A 193 (1948) 281-297
54. Tsai SW. Strength characteristics of composite materials. NASA CR-224; 1965.
55. Hoffman O. The brittle strength of orthotropic materials. J Compos Mater 1 (1967) 200-206
56. Theocaris P.S. Weighing failure tensor polynomial criteria for composites. Int J Damage Mech 1 (1992) 4-46
57. Kim C.H., and Yeh H.-Y. Development of a new yielding criterion: the Yeh-Stratton criterion. Eng Fract Mech 47 (1994) 569-582
58. Echaabi J., and Trochu F. Failure mode dependent strength criteria for composite laminates. J Reinf Plastic Compos 16 10 (1997) 926-945
59. Kim RY, Soni SR. Failure of composite laminates due to combined interlaminar normal and shear stresses. In: Kawata K, Umekawa S, Kobayashi A, editors. Composites'86: recent advances in Japan and the United States, Proceedings of Japan-U.S. CCM-III; 1986. p. 341-50.
60. Ochoa O.O., and Engblom J.J. Analysis of progressive failure in composites. Compos Sci Technol 28 (1987) 87-102
61. Brewer J.C., and Lagacé P.A. Quadratic stress criterion for initiation of delamination. J Compos Mater 22 (1988) 1141-1155
62. Long R.S. Static strength of adhesively bonded ARALL-1 joints. J Compos Mater 25 (1991) 391-415
63. Tong L. An assessment of failure criteria to predict the strength of adhesively bonded composite double lap joints. J Reinf Plastic Compos 16 8 (1997) 698-713
64. Zhang X. Impact damage in composite aircraft structures - experimental testing and numerical simulation. J Aerospace Eng 212 4 (1998) 245-259
65. Hahn H.T. A mixed-mode fracture criterion for composite materials. Compos Technol Rev 5 (1983) 26-29
66. Hahn HT, Johnnesson T. A correlation between fracture energy and fracture morphology in mixed-mode fracture of composites. In: Mechanical behaviour of materials - IV, Stockholm; 1983. p. 431-8.
67. Whitcomb JD. Analysis of instability-related growth of a through-width delamination. NASA TM-86301; 1984.
68. Donaldson S.L. Fracture toughness testing of graphite/epoxy and graphite/peek composites. Composites 16 2 (1985) 103-112
69. Hashemi S., and Kinloch A.J. Interlaminar fracture of composite materials. In: Matthews F.L., et al. (Ed). 6th ICCM & 2nd ECCM (1987), Elsevier Applied Science, New York 254-264
70. White SR. Mixed-mode interlaminar fracture of graphite/epoxy. Washington University; 1987.
71. Hashemi S., and Kinloch A.J. The effect of geometry, rate and temperature on the mode I, mode II and mixed-mode I/II interlaminar fracture of carbon-fibre/poly(ether-ether ketone) composites. J Compos Mater 24 (1990) 918-956
72. Yan X.Q., Du S.Y., and Wang D.U.O. An engineering method of determining the delamination fracture toughness of composite laminates. Eng Fract Mech 39 4 (1991) 623-627
73. Hashemi S, Williams JG. Mixed-mode fracture in fiber-polymer composite laminates. In: O'Brien TK, editor. Composite materials: fatigue and fracture, vol. 3. ASTM STP 1110. W. Conshohocken (PA): ASTM Int.; 1991.
74. Reeder JR. A bilinear failure criterion for mixed-mode delamination. In: Componeschi Jr ET, editor. Composite materials: testing and design (eleventh volume). ASTM STP 1206. W. Conshohocken (PA): ASTM Int.; 1993. p. 303-22.
75. Benzeggagh M.L., and Kenane M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol 56 (1996) 439-449
76. Davidson B.D., and Zhao W. An accurate mixed-mode delamination failure criterion for laminated fibrous composites requiring limited experimental input. J Compos Mater 41 6 (2007) 679-702
77. Cui W., and Wisnom M.R. A combined stress-based and fracture mechanics-based model for predicting delamination in composites. Composites 24 (1993) 467-474
78. Hachenberg D., and Kossira H. Stringer peeling effects at stiffened composite panels in the postbuckling range. J Aircraft 30 5 (1993) 769-776
79. Schellekens J.C.J., and de Borst R. A nonlinear finite element approach for the analysis of mode-I free edge delamination in composites. Int J Solid Struct 30 (1993) 1239-1253
80. Reedy Jr. E.D., Mello F.J., and Guess T.R. Modelling the initiation and growth of delaminations in composite structures. J Compos Mater 31 8 (1997) 812-831
81. Mi Y., Crisfield M.A., Davies G.A.O., and Hellweg H.B. Progressive delamination using interface elements. J Compos Mater 32 14 (1998) 1246-1272
82. Petrossian Z., and Wisnom M.R. Prediction of delamination initiation and growth from discontinuous plies using interface elements. Composites: Part A 29 (1998) 503-515
83. Wisheart M., and Richardson M.O.W. The finite element analysis of impact induced delamination in composite materials using a novel interface element. Composites: Part A 29 (1998) 301-313
84. de Moura M.F.S.F., Gonçalves J.P.M., Marques A.T., and de Castro P.M.S.T. Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model. Compos Struct 50 (2000) 151-157
85. Jansson E., and Larsson R. A damage model for simulation of mixed-mode delamination growth. Compos Struct 53 (2001) 409-417
86. Qiu Y., Crisfield M.A., and Alfano G. An interface element formulation for the simulation of delamination with buckling. Eng Fract Mech 68 (2001) 1755-1776
87. Borg R., Nilsson L., and Simonsson K. Simulation of delamination in fiber composites with a discrete cohesive failure model. Compos Sci Technol 61 (2001) 667-677
88. Zou Z., Reid S.R., Li S., and Soden P.D. Application of a delamination model to laminated composite structures. Compos Struct 56 (2002) 375-389
89. Zou Z., Reid S.R., and Li S. A continuum damage model for delaminations in laminated composites. J Mech Phys Solid 51 (2003) 333-356