A study on the hysteresis, surface temperature change and fatigue life of SM490A, SM490A-weld and FC250 metal materials

International Journal of Fatigue

Volumn 32, Issue 7, 2010, Pages 1159-1166

  Kim, Jaehoon ^a,b   Jeong, H Y ^b  

^a Korea Railroad Research Institute   (South Korea)

^b Sogang University   (South Korea)

Author keywords

Fatigue life; Hysteresis; Surface temperature change

Indexed keywords

FATIGUE LIFE; FATIGUE TESTS; INFRA-RED CAMERAS; LINEAR RELATIONSHIPS; LINEARLY PROPORTIONAL; METAL MATERIALS; SQUARE ROOTS; STRESS LEVELS; SURFACE TEMPERATURE CHANGES; SURFACE TEMPERATURES;

ALGEBRA; ATMOSPHERIC TEMPERATURE; FATIGUE OF MATERIALS; FATIGUE TESTING; SURFACE PROPERTIES; WELDING; WELDS;

HYSTERESIS;

EID: 77949492672     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.12.012     Document Type: Article

References (42)

1. Hatanaka K., Ishiga Y., Kawazoe R., Hasui M., Ohgi J., and Ogawa H. Inelastic deformation and its related life under cyclic/creep loadings in Si3N4-monolithic and Si3N4/SiCw-composite ceramics at elevated temperature. Mater Sci Eng A 468-470 (2007) 273-280
2. Yawny A., Olbricht J., Sade M., and Eggeler G. Pseudoelastic cycling and ageing effects at ambient temperature in nanocrystalline Ni-rich NiTi wire. Mater Sci Eng A 481-482 (2008) 86-90
3. Matsuzawa M., Fujimagari E., and Horibe S. Cyclic deformation and crack growth in zirconia ceramics. Mater Sci Eng A314 (2001) 105-109
4. Lin X.Z., and Chen D.L. Strain controlled cyclic deformation behavior of an extruded magnesium alloy. Mater Sci Eng A 496 (2008) 106-113
5. Fournier B., Sauzay M., Caes C., Noblecourt M., and Mottot M. Analysis of the hysteresis loops of a martensitic steel. Part I: study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method. Mater Sci Eng A 437 (2006) 183-196
6. Fournier B., Sauzay M., Caes C., Mottot M., Noblecourt M., and Pineau A. Analysis of the hysteresis loops of a martensitic steel. Part II: study of the influence of creep and stress relaxation holding times on cyclic behaviour. Mater Sci Eng A 437 (2006) 197-211
7. Yin S.M., Yang H.J., Li S.X., Wua S.D., and Yang F. Cyclic deformation behavior of as-extruded Mg-3%Al-1%Zn. Scripta Mater 58 (2008) 751-754
8. Li H., Nishimura A., Nagasaka T., and Muroga T. Fatigue life and cyclic softening behavior of JLF-1 steel. Fusion Eng Des 82 (2007) 2595-2600
9. Bezazi A., and Scarpa F. Mechanical behaviour of conventional and negative Poisson's ratio thermoplastic polyurethane foams under compressive cyclic loading. Int J Fatigue 29 (2007) 922-930
10. Abolmaali A., Treadway J., Aswath P., Lu F.K., and McCarthy E. Hysteresis behavior of t-stub connections with superelastic shape memory fasteners. J Constr Steel Res 62 (2006) 831-838
11. Evans W.J., Screech J.E., and Williams S.J. Thermo-mechanical fatigue and fracture of INCO718. Int J Fatigue 30 (2008) 257-267
12. Chen G., and Chen X. Fatigue damage coupled constitutive model for 63Sn37Pb solder under proportional and non-proportional loading. Mech Mater 39 (2007) 11-23
13. Nagode M., and Zingsheim F. An online algorithm for temperature influenced fatigue-life estimation: strain-life approach. Int J Fatigue 26 (2004) 155-161
14. 12 as the ferroelectric layer. Microelectron Eng 66 (2003) 773-778
15. Liu C., Cheng L., Luan X., Li B., and Zhou J. Damage evolution and real-time non-destructive evaluation of 2D carbon-fiber/SiC-matrix composites under fatigue loading. Mater Lett 62 (2008) 3922-3924
16. Wolf B., Fleck C., and Eifler D. Characterization of the fatigue behavior of the magnesium alloy AZ91D by means of mechanical hysteresis and temperature measurements. Int J Fatigue 26 (2004) 1357-1363
17. Kim J., and Jeong H.-Y. A study on the material properties and fatigue life of natural rubber with different carbon blacks. Int J Fatigue 27 (2005) 263-272
18. BS 7608: Code of practice for fatigue design and assessment of steel structures; 1993.
19. JIS E 4207: Truck frames for railway rolling stock - General rules for design; 1992.
20. JIS G 3106: Rolled steels for welded structure; 2008.
21. JIS G 5501: Grey iron castings; 1995.
22. Sato Y.S., Arkom P., Kokawa H., Nelson T.W., and Steel R.J. Effect of microstructure on properties of friction stir welded inconel alloy 600. Mater Sci Eng A 477 (2008) 250-258
23. Malarvizhi S., Raghukandan K., and Viswanathan N. Investigations on the influence of post weld heat treatment on fatigue crack growth behaviour of electron beam welded AA2219 alloy. Int J Fatigue 30 (2008) 1543-1555
24. Young M.C., Tsay L.W., Shin C.S., and Chan S.L.I. The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds. Int J Fatigue 29 (2007) 2155-2162
25. Anderson T.L. Fracture mechanics: fundamentals and applications (1995), CRC Press, Inc.
26. Noriaki Katori, Shouichi Ishii, United States patent: US 7083685B1: Gray cast iron member; 2006.
27. Olbricht J., Yawny A., Condo A.M., Lovey F.C., and Eggeler G. The influence of temperature on the evolution of functional properties during pseudoelastic cycling of ultra fine grained NiTi. Mater Sci Eng A 481-482 (2008) 142-145
28. Roth M., and Biermann H. Thermo-mechanical fatigue behaviour of a modern c-TiAl alloy. Int J Fatigue 30 (2008) 352-356
29. Audenino A.L., Crupi V., and Zanetti E.M. Correlation between thermography and internal damping in metals. Int J Fatigue 25 (2003) 343-351
30. Boronski D. Cyclic material properties distribution in laser-welded joints. Int J Fatigue 28 (2006) 346-354
31. Chan R.W.K., and Albermani F. Experimental study of steel slit damper for passive energy dissipation. Eng Struct 30 (2008) 1058-1066
32. Zhou M., and Clode M.P. Effects of specimen geometry on temperature rise and flow behavior of aluminum alloys in hot torsion testing. Mater Des 17 (1996) 275-281
33. Yao X.X., Sandstrom R., and Stenqvist T. Strain-controlled fatigue of a braze clad Al-Mn-Mg alloy at room temperature and at 75 and 180 °C. Mater Sci Eng A267 (1999) 1-6
34. Tchankov D.S., and Vesselinov K.V. Fatigue life prediction under random loading using total hysteresis energy. Int J Pres Ves Pip 75 (1998) 955-960
35. Livieri P., and Tovo R. The use of the JV parameter in welded joints: stress analysis and fatigue assessment. Int J Fatigue 31 (2009) 153-163
36. Walther F., and Eifler D. Cyclic deformation behavior of steels and light-metal alloys. Mater Sci Eng A 468-470 (2007) 259-266
37. Walther F., and Eifler D. Local cyclic deformation behavior and microstructure of railway wheel materials. Mater Sci Eng A 387-389 (2004) 481-485
38. Starke P., Walther F., and Eifler D. PHYBAL-a new method for lifetime prediction based on strain, temperature and electrical measurements. Int J Fatigue 28 (2006) 1028-1036
39. Morrow J.D. Cyclic plastic stain energy and fatigue of metals. Internal friction, damping and cyclic plasticity, ASTM STP vol. 378 (1964), ASTM, Philadelphia, Pennsylvania 45-87
40. Manson S.S. Int J Fract Mech 2 (1966) 328-364
41. Coffin Jr. L.F. Appl Mater Res 1 3 (1962) 931-950
42. Basquins O.H. Proc ASTM 10 (1910) 625-630