Analysis of the hysteresis loops of a martensitic steel. Part I: Study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method

Materials Science and Engineering: A

Volumn 437, Issue 2, 2006, Pages 183-196

  Fournier, B ^a,b   Sauzay, M ^a   Caes C ^a   Noblecourt, M ^a   Mottot, M ^a  

^a JANNUS Saclay Laboratory   (France)

^b CENTRE DES MATÉRIAUX   (France)

Author keywords

9Cr; High temperature; Kinematic stress; Martensitic steel; Softening; Statistical process control; Stress partition; Viscosity

Indexed keywords

CYCLIC LOADS; FATIGUE OF MATERIALS; HIGH TEMPERATURE EFFECTS; HYSTERESIS; KINEMATICS; MARTENSITE; STATISTICAL PROCESS CONTROL; STRAIN; STRESSES;

ENHANCED STRESS PARTITIONING METHOD; FATIGUE LOADINGS; HYSTERESIS LOOPS; KINEMATIC STRESS; MARTENSITIC STEEL; SOFTENING;

STEEL;

CYCLIC LOADS; FATIGUE OF MATERIALS; HIGH TEMPERATURE EFFECTS; HYSTERESIS; KINEMATICS; MARTENSITE; STATISTICAL PROCESS CONTROL; STEEL; STRAIN; STRESSES;

EID: 33749573450     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2006.08.086     Document Type: Article

References (79)

1. Swindeman R.W., Santella M.L., Maziasz P.J., Roberts B.W., and Coleman K. Pressure Vessels Piping 81 (2004) 507-512
2. Gieseke B.G., Brinkman C.R., and Maziasz P.J. Microstruct. Mech. Properties Aging Mater. (1993)
3. Kim S., and Weertman J.R. Metall. Trans. A 19A (1988) 999-1007
4. Nagesha A., Valsan M., Kannan R., Bhanu Sankara Rao K., and Mannan S.L. Int. J. Fatigue 24 (2002) 1285-1293
5. Kunz L., and Lukas P. Mater. Sci. Eng. A319-A321 (2001) 555-558
6. Aoto K., Komine R., Ueno F., Kawasaki H., and Wada Y. Nucl. Eng. Design 153 (1994) 97-110
7. Armas A.F., Petersen C., Schmitt R., Avalos M., and Alvarez-Armas I. J. Nucl. Mater. 307-311 (2002) 509-513
8. Yaguchi M., and Takahashi Y. Int. J. Plast. 21 (2005) 43-65
9. Kruml T., and Polak J. Mater. Sci. Eng. A319-A321 (2001) 564-568
10. Agnew S.R., and Weertman J.R. Mater. Sci. Eng. A244 (1998) 143-153
11. Mughrabi H., Höppel H.W., and Kautz M. Scripta Mater. 51 (2004) 807-812
12. Meyers M.A., Mishra A., and Benson D.J. Progress Mater. Sci. (2005)
13. Kim H.K., Choi M.I., Chung C.S., and Shin D.H. Mater. Sci. Eng. A340 (2003) 243-250
14. Lemaitre J., and Chaboche J.-L. Mechanics of Solid Materials (1987), Springer-Verlag
15. Delobelle P., and Oytana C. Nucl. Eng. Design 83 (1984) 333-348
16. Delobelle P., and Oytana C. J. Nucl. Mater. 139 (1986) 204-227
17. Sommer C., Mughrabi H., and Lochner D. Acta Mater. 46 (1998) 1527-1536
18. Kuhlmann-Wilsdorf D., and Laird C. Mater. Sci. Eng. 372 (1979) 111-120
19. Sauzay M., Mottot M., Allais L., Noblecourt M., Monnet I., and Perinet J. Nucl. Eng. Design 232 (2004) 219-236
20. Polak J., Fardoun F., and Degallaix S. Mater. Sci. Eng. A297 (2001) 144-153
21. Polak J., Fardoun F., and Degallaix S. Mater. Sci. Eng. A215 (1996) 104-112
22. Polak J., Fardoun F., and Degallaix S. Mater. Sci. Eng. A297 (2001) 154-161
23. Fardoun F., Polak J., and Degallaix S. Mater. Sci. Eng. A234-A236 (1997) 456-458
24. Polak J., and Klesnil M. Mater. Sci. Eng. A63 (1984) 189-196
25. Polak J., Petrenec M., and Degallaix S. Scripta Mater. 47 (2002) 731-736
26. Risbet M., Feaugas X., and Clavel M. J. Phys. IV. France 11 (2001)
27. Challenger K.D., and Vining P.G. Mater. Sci. Eng. A58 (1983) 257-267
28. Argon A.S., and Takeuchi S. Acta Metall. 29 (1981) 1877-1884
29. Morris M.A., and Martin J.L. Acta Metall. 32 (1984) 1609-1623
30. Gaudin C., and Feaugas X. Acta Mater. 52 (2004) 3097-3110
31. Gibeling J.C., and Nix W.D. Acta Mater. 28 (1980) 1743-1752
32. Feaugas X. Memoire d'Habilitation à Diriger des Recherches (1999)
33. Feaugas X. Acta Mater. 47 (1999) 3617-3632
34. Feaugas X., and Gaudin C. Mat. Sci. Eng. A309-A310 (2001) 382-3850
35. Haddou H., Gaudin C., and Feaugas X. J. Phys. IV. France 11 (2001)
36. Guillemer-Neel C., Feaugas X., and Clavel M. Metall. Mater. Trans. 31A (2000) 3075-3085
37. Helbert A.L., Feaugas X., and Clavel M. Metall. Mater. Trans. 30A (1999) 2853-2863
38. Beranger A.S., Feaugas X., and Clavel M. Mat. Sci. Eng. A172 (1993) 31-41
39. Feaugas X., and Clavel M. Acta Metall. 45 (1997) 2685-2701
40. Sauzay M., Brillet H., Monnet I., Mottot M., Barcelo F., Fournier B., and Pineau A. Mat. Sci. Eng. A400-A401 (2005) 241-244
41. Fournier B., Sauzay M., Mottot M., Brillet H., Monnet I., and Pineau A. In: Shibli I.A., Holdsworth S.R., and Merckling G. (Eds). Creep & Fracture in High Temperature Components-Design & Life Assessment Issues (2005), Destech Publications, Inc., Pennsylvania, USA
42. Feaugas X. Recent Res. Dev. Mater. Sci. 4 (2003) 35-64
43. Blum W., and Finkel A. Acta Metall. 30 (1982) 1705-1715
44. Cottrell A.H. Dislocations and Plastic Flow in Crystals (1953), Oxford University Press
45. Mughrabi H., and Ungar T. Dislocations Solids 11 (2003) 345-407
46. Dickson J., Handfield L., and L'Esperance G. Mater. Sci. Eng. 64 (1983) L3-L7
47. Dickson J., Boutin J., and Handfield L. Mater. Sci. Eng. 64 (1984) L7-L11
48. Handfield L., Dickson J., and L'Esperance G. A Comparison of Cyclic Deformation of Two Purities of Zirconium (1985), ICSMA7, Pcrgamon press, Canada
49. Morrison D.J., Jia Y., and Moosbrugger J.C. Mater. Sci. Eng. A314 (2001) 24-30
50. Masing G. Wissenschaftliche Veroff Siemens Konzern 3 (1923) 231
51. Polack J. Cyclic Plasticity and Low Cycle Fatigue Life of Materials (1991), Elsevier Science Ltd.
52. S. Catalao, X. Feaugas, P. Pilvin. Unpublished Report: CEA/DEN/CAD/DER/SESI/LCSI DO 20, 2004.
53. X. Feaugas. Microstructure et modélisation du comportement en fatigue uniaxiale et multiaxiale d'un alliage de titane biphasé. PhD thesis, UTC, 1994.
54. Clavel M., and Feaugas X. Micromechanisms of Plasticity Under Multiaxial Cyclic Loading, Multiaxial Fatigue and Design (1994), Mechanical Engineering Publications, London pp. 21-41
55. Zhou D., Moosbrugger J.C., Jia Y., and Morrison D.J. Int. J. Plastic. 21 (2005) 2344-2368
56. Bigerelle M., and Iost A. Int. J. Fatigue 21 (1999) 299-307
57. Western Electric. Statistical Quality Handbook (1956), AT&T, Indianapolis, IN
58. Montgomery D.C. Introduction to Statistical Quality Control (1985), John Wiley, New York
59. Fournier B., Rupin N., Bigerelle M., Najjar D., and Iost A. Accepted by J. Process Control (2006)
60. Nelson L.S. J. Qual. Technol. 16 (1984) 237-239
61. Nelson L.S. J. Qual. Technol. 17 (1985) 114-116
62. Zhang S., and Wu Z. Comput. Ind. Eng. 49 (2005) 76-97
63. Kolmogorov A. Giornale dell'Instituto Italiano degla Attuari 4 (1933) 83-91
64. Smirnov N.V. Bull. Moscow Univ. 2 (1939) 3-16
65. Smirnov N.V. Ann. Math. Stat. 19 (1948) 279-281
66. Michalak J.T. Acta Metall. 13 (1965)
67. Mughrabi H., Herz K., and Stark X. Acta Metall. 24 (1976) 659-668
68. Yaguchi M., and Takahashi Y. Int. J. Plastic. 16 (2000) 241-262
69. Friedel J. Les Dislocations. Monographies de Chimie Physique (1956), Gauthier-Villars, Paris
70. Nabarro F.R.N. Philos. Magazine 1 (1952) 269-395
71. Kuhlmann-Wilsdorf D. Mater. Sci. Eng. A39 (1979) 231-245
72. Di Schino A., and Kenny J.M. Mater. Lett. 57 (2003) 1830-1834
73. H. Haddou, Influence de la taille de grain et de l'énergie de faute d'empilement sur l'état de contraintes internes développées au cours de la déformation plastique en traction simple et fatigue oligocyclique. PhD thesis, UTC, 2004.
74. Freinois S., Feaugas X., and Pilvin P. J. Phys. IV. France 11 (2001) 301-308
75. S. Freinois, Mecanismes de corrosion de l acier T91 par l eutectique Pb-Bi utilise comme materiau de spollation. PhD thesis, UTC, 2001.
76. Armas A.F., Petersen C., Schmitt R., Avalos M., and Alvarez I. J. Nucl. Mater. 329-333 (2004) 252-256
77. Vasina R., Lukas P., Kunz L., and Sklcnicka V. Fatigue Fract. Eng. Mater. Struct. 18 (1995) 27-35
78. Moosbrugger J.C., Morrison D.J., and Jia Y. Int. J. Plastic. 16 (2000) 439-467
79. Li J.C.M. Trans. Metall. Soc. Aime 227 (1963) 239-247