Electrochemical techniques in corrosion: Status, limitations and needs

Journal of ASTM International

Volumn 5, Issue 2, 2008, Pages

  Frankel, Gerald S ^a  

^a OHIO STATE UNIVERSITY   (United States)

Author keywords

Corrosion; Electrochemical tests

Indexed keywords

CORROSION PHENOMENA; ELECTROCHEMICAL PROCESS; ELECTROCHEMICAL TECHNIQUES; ELECTROCHEMICAL TEST; ELECTROCHEMICAL TESTS; MASS LOSS; METAL OXIDATION; ONLINE MONITORING; PER UNIT; SIMULTANEOUS REDUCTION;

ATMOSPHERIC CORROSION; CHEMICAL DETECTION; ELECTROCHEMICAL CORROSION; ELECTROCHEMISTRY;

CORROSION RATE;

EID: 76649137608     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI101241     Document Type: Article

References (114)

1. Frankel, G. S. and Rohwerder, M., "Experimental Techniques for Corrosion," in Corrosion and Oxide Films, Encyclopedia of Electrochemistry, Vol.4, M. Stratmann and G. S. Frankel, Eds., Wiley-VCH, Weinheim, Germany, 2003.
2. Mansfeld, F., "The Polarization Resistance Technique for Measuring Corrosion Currents," in Advances in Corrosion Science and Technology, M. G. Fontana and R. W. Staehle, Eds., Plenum, New York, 1976.
3. Scully, J. R., "Electrochemical Methods for Laboratory Corrosion Testing," in Corrosion Testing and Evaluation: Silver Anniversary Volume, R. Baboian and S. W. Dean, Eds., ASTM International, West Conshohocken, PA, 1990.
4. Scully, J. R., "Polarization Resistance Method for Determination of Instantaneous Corrosion Rates," Corrosion (Houston), Vol.56, 2000, pp. 199-218.
5. Kelly, R. G., Scully, J. R., Shoesmith, D. W. and Buchheit, R. G., Electrochemical Techniques in Corrosion Science and Engineering, Marcel Dekker, New York, 2003.
6. Knotkova-Cermakova, D. and Barton, K., "Corrosion Aggressivity of Atmospheres (Derivation and Classification)," in Atmospheric Corrosion of Metals, ASTM STP 767, S. W. Dean Jr. and E. C. Rhea, Eds., ASTM International, West Conshohocken, PA, 1982.
7. Leygraf, C. and Graedel, T. E., Atmospheric Corrosion, Wiley-Interscience, New York, 2000.
8. ASTM, Standard B117-97, "Standard Practice for Operating Salt Spray (Fog) Testing Apparatus," Annual Book of ASTM Standards, Vol.3.02, ASTM International, West Conshohocken, PA, 2000.
9. Cyclic Cabinet Corrosion Testing, G. S. Haynes, Ed., ASTM STP 1238, ASTM International, West Conshohocken, PA, 1995.
10. Frankel, G. S. and Braithwaite, J. W., "Corrosion in Microelectronic and Magnetic Data-Storage Devices," in Corrosion Mechanisms in Theory and Practice, 2nd Ed., P. Marcus, Ed., Marcel Dekker, New York, 2002.
11. Thierry, D., Thoren, A. and Leygraf, C., "Corrosion Monitoring Techniques Applied to Cooling Water and District Heating Systems," Paper 463, in Corrosion/87, NACE, Houston, TX, 1987.
12. Jones, D. A., Principles and Prevention of Corrosion, 2nd Ed., Simon and Schuster, Upper Saddle River, NJ, 1996.
13. Frankel, G. S., "Wagner-Traud to Stern-Geary; Development of Corrosion Kinetics,22 in Corrosion Retrospective, G. S. Frankel, H. S. Isaacs, J. R. Scully and J. D. Sinclair, Eds., The Electrochemical Society, New York, 2002.
14. Wagner, C. and Traud, W., On the Interpretation of Corrosion Processes Through the Superposition of Electrochemical Partial Processes and on the Potential of Mixed Electrodes,22 Corrosion, Vol.62, 2006, pp. 844-855.
15. Electrochemical Techniques, R. Baboian, Ed., NACE, Houston, 1986.
16. Corrosion Tests and Standards, R. Baboian, Ed., ASTM International, West Conshohocken, PA, 1995.
17. Kendig, M. and Mansfeld, F., "Corrosion Rates from Impedance Measurements: An Improved Approach for Rapid Automatic Analysis," Corrosion (Houston), Vol.39, 1983, pp. 466-467.
18. Lorenz, W. J. and Mansfeld, F., "Determination of Corrosion Rates by Electrochemical DC and AC Methods," Corros. Sci., Vol.21, 1981, pp. 647-672.
19. Impedance Spectroscopy, J. R. Macdonald, Ed., John Wiley and Sons, New York, 1987.
20. Tait, W. S., An Introduction to Electrochemical Testing for Practicing Engineers and Scientists, PairODocs Publications, Racine, WI, 1994.
21. Cottis, R. A., Turgoose, S., and Newman, R. C., Corrosion Testing Made Easy: Impedance and Noise Analysis, B. C. Syrett, Ed., NACE, Houston, TX, 1999.
22. Bertocci, U., Frydman, J., Gabrielli, C., Huet, F. and Keddam, M., "Analysis of Electrochemical Noise by Power Spectral Density Applied to Corrosion Studies. Maximum Entropy Method or Fast Fourier Transform?," J. Electrochem. Soc., Vol.145, 1998, pp. 2780-2786.
23. [23] Bertocci, U., Gabrielli, C., Huet, F. and Keddam, M., Noise Resistance Applied to Corrosion Measurements. I. Theoretical Analysis, J. Electrochem. Soc., 144, 1997, pp. 31-37. (Pubitemid 127628647)
24. [24] Bertocci, U., Gabrielli, C., Huet, F., Keddam, M. and Rousseau, P., Noise Resistance Applied to Corrosion Measurements. II. Experimental Tests, J. Electrochem. Soc., 177, 1997, pp. 37-43. (Pubitemid 127628648)
25. Bertocci, U. and Huet, F., "Noise Resistance Applied to Corrosion Measurements. III. Influence of the Instrumental Noise on the Measurements," J. Electrochem. Soc., Vol.144, 1997, pp. 2786-2793.
26. Cottis, R. A., "Interpretation of Electrochemical Noise Data," Corrosion (Houston), Vol.57, 2001, pp. 265-285.
27. Huet, F., "Listening to Corrosion," Interface (USA) 10, 2001, pp. 40-43.
28. Mansfeld, F. and Xiao, H., "Electrochemical Noise Analysis of Iron Exposed to NaCl Solutions of Different Corrosivity," J. Electrochem. Soc., Vol.140, 1993, pp. 2205-2209.
29. Cottis, R. A., "Sources of Electrochemical Noise in Corroding Systems," Russ. J. Electrochem., Vol.42, 2006, pp. 557-566.
30. Hagensen, A. R. and Edgemon, G. L., "A Multifunction Corrosion Monitoring System for Nuclear Waste Storage," Paper 07364, in Corrosion/2007, NACE, Houston, TX, 2007.
31. Bosch, R. W., Hubrecht, J., Bogaerts, W. F. and Syrett, B. C., "Electrochemical Frequency Modulation: A New Electrochemical Technique for Online Corrosion Monitoring," Corrosion (Houston), Vol.57, 2001, pp. 60-70.
32. Kus, E. and Mansfeld, F., "An Evaluation of the Electrochemical Frequency Modulation (EFM) Technique," Corros. Sci., Vol.48, 2006, pp. 965-979.
33. Bohni, H., Suter, T., and Schreyer, A., "Micro- and Nanotechniques to Study Localized Corrosion," Electrochim. Acta, Vol.40, 1995, pp. 1361-1368.
34. Suter, T. and Alkire, R. C., "Microelectrochemical Studies of Pit Initiation at Single Inclusions in Al 2024-T3," J. Electrochem. Soc., Vol.148, 2001, pp. B36-B42.
35. Suter, T. and Bohni, H., "Microelectrodes for Corrosion Studies in Microsystems," Electrochim, Acta, Vol.47, 2001, pp. 191-199.
36. Suter, T., Peter, T. and Bohni, H., "Microelectrochemical Investigations of MnS Inclusions," Mater. Sci. Forum, 1995, pp. 25-40.
37. Landolt, D., Corrosion and Surface Chemistry of Metals, EPFL Press, Lausanne, 2007.
38. Kaesche, H., Metallic Corrosion, NACE, Houston TX, 1985.
39. Fontana, M. G., Corrosion: A Compilation, The Press of Hollenback, Columbus, OH, 1957.
40. Kruger, J. and Calvert, J. P., "Ellipsometric-Potentiostatic Studies of Iron Passivity," J. Electrochem. Soc., Vol.114, 1967, pp. 43-49.
41. MacDougall, B. and Cohen, M., "Anodic Oxide Films on Nickel in Acid Solutions," J. Electrochem. Soc., Vol.123, 1976, pp. 191-197.
42. Sato, N. and Cohen, M., "The Kinetics of Anodic Oxidation of Iron in Neutral Solution," J. Electrochem. Soc., Vol.111, 1964, pp. 512-519.
43. Burstein, G. T. and Marshall, P. I., "Growth of Passivating Films on Scratched 304L Stainless Steel in Alkaline Solution," Corros. Sci., Vol.23, 1983, pp. 125-137.
44. Burstein, G. T. and Newman, R. C., "Anodic Behaviour of Scratched Silver Electrodes in Alkaline Solution," Electrochim. Acta, Vol.25, 1980, pp. 1009-1013.
45. Burstein, G. T. and Davies, D. H., "Analysis of Anodic Films Formed on Cobalt in Bicarbonate and Borate Electrolytes," Corros. Sci., Vol.20, 1980, pp. 989-995.
46. Bardwell, J. A., MacDougall, B. and Graham, M. J., "Use of 180/SIMS and Electrochemical Techniques to Study the Reduction and Breakdown of Passive Oxide Films on Iron," J. Electrochem. Soc., Vol.135, 1988, pp. 413-418.
47. Burstein, G. T. and Davenport, A. J., "The Current-Time Relationship During Anodic Oxide Film Growth Under High Electric Field," J. Electrochem. Soc., Vol.136, 1989, pp. 936-941.
48. Kelly, R. G. and Newman, R. C., "Confirmation of the Applicability of Scratched Electrode Techniques for the Determination of Bare Surface Current Densitites," J. Electrochem. Soc., Vol.137, 1990, pp. 357-358.
49. Frankel, G. S., Jahnes, C. V., Brusič, V. and Davenport, A. J., "Repassivation Transients Measured with the Breaking-Electrode Technique on Aluminum Thin-Film Samples," J. Electrochem. Soc., Vol.142, 1995, pp. 2290-2295.
50. Frankel, G. S., "Pitting Corrosion of Metals: A Review of the Critical Factors," J. Electrochem. Soc., Vol.145, 1998, pp. 2186-2197.
51. Pessall, N. and Liu, C., "Determination of Critical Pitting Potentials of Stainless Steel in Aquious Chloride Environments," Electrochim. Acta, Vol.16, 1971, pp. 1987-2003.
52. ASTM Standard F746-87, "Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials," Annual Book of ASTM Standards, Vol.13.01, ASTM International, West Conshohocken, PA, 2000.
53. Schmutz, P. and Frankel, G. S., "Characterization of AA2024-T3 by Scanning Kelvin Probe Force Microscopy," J. Electrochem. Soc., Vol.145, 1998, pp. 2285-2294.
54. Schmutz, P. and Frankel, G. S., "Corrosion Study of AA2024-T3 by Scanning Kelvin Probe Force Microscopy and In Situ AFM Scratching," J. Electrochem. Soc., Vol.145, 1998, pp. 2298-2306.
55. Frankel, G. S. and Leblanc, P., "Studies of Corrosion Using Scanning Kelvin Probe Force Microscopy and AFM Scratching," Corros. Sci. Technol., Vol.31, 2002, pp. 419-425.
56. Iannuzzi, M. and Frankel, G. S., "Inhibition of AA2024-T3 Corrosion by Vanadates: An AFM Scratching Investigation," Corrosion (Houston), Vol.63, 2007, pp. 672-688.
57. Schmutz, P. and Frankel, G. S., "Influence of Dichromate Ions on Corrosion of Pure Aluminum and AA2024-T3 in NaCl Solution Studied by AFM Scratching," J. Electrochem. Soc., Vol.146, 1999, pp. 4461-4472.
58. Akashi, M., Nakayama, G., and Fukuda, T., in Corrosion/98, NACE, Houston, TX, 1998, Paper 98158.
59. Shibata, T., "Development in the Concept of Repassivation Potential as a Measure of Crevice Corrosion Susceptibility," in A Compilation of Special Topic Reports, R M. G. Wong and J. H. Payer, Eds., Dept. of Energy, Washington, DC, 2002, http://www.ocrwm.doe.gov/documents/ peer-2/index.pdf.
60. Evans, K. J., Yilmaz, A., Day, S. D.I., Wong, L. L., Estill, J. C. and Rebak, R. B., "Using Electrochemical Methods to Determine Alloy 22's Crevice Corrosion Repassivation Potential," JOM, Vol.57, 2005, pp. 56-61.
61. ASTM Standard G79-01, "Standard Guide for Crevice Corrosion Testing of Iron-Base and NickelBase Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments," Annual Book of ASTM Standards, Vol.3.02, ASTM International, West Conshohocken, PA, 2004.
62. Frankel, G. S., Stockert, L., Hunkeler, F. and Boehni, H., "Metastable Pitting of Stainless Steel," Corrosion (Houston), Vol.43, 1987, pp. 429-436.
63. Akiyama, E. and Frankel, G. S., "The Influence of Dichromate Ions on Al Dissolution Kinetics in Artificial Crevice Electrode Cells," J. Electrochem. Soc., Vol.146, 1999, pp. 4095-4100.
64. Frankel, G. S., "The Growth of 2-D Pits in Thin Film Aluminum," Corros. Sci., Vol.30, 1990, pp. 1203-1218.
65. Tester, J. W. and Isaacs, H. S., "Diffusional Effects in Simulated Localized Corrosion," J. Electrochem. Soc., Vol.122, 1975, pp. 1438-1445.
66. Gaudet, G. T., Mo, W. T., Hatton, T. A., Tester, J. W., Tilly, J., Isaacs, H. S. and Newman, R. C., "Mass Transfer and Electrochemical Kinetic Interactions in Localized Pitting Corrosion," AIChE J., Vol.32, 1986, pp. 949-958.
67. Isaacs, H. S. and Newman, R. C., "Dissolution Kinetics During Localized Corrosion," in Corrosion and Corrosion Protection, R. P. Frankenthal and R Mansfeld, Eds., ECS, Pennington, NJ, 1981.
68. Newman, R. C., "The Dissolution and Passivation Kinetics of Stainless Alloys Containing Molybdenum-I. Coulometric Studies of Fe-Cr and Fe-Cr-Mo Alloys," Corros. Sci., Vol.25, 1985, pp. 331-339.
69. Newman, R. C., "The Dissolution and Passivation Kinetics of Stainless Alloys Containing Molybdenum-II. Dissolution Kinetics in Artificial Pits," Corros. Sci., Vol.25, 1985, pp. 341-350.
70. Zhang, W. and Frankel, G. S., "Anisotropy of Localized Corrosion in AA2024-T3," Electrochem. Solid-State Lett., Vol.3, 2000, pp. 268-270.
71. Sehgal, A., Frankel, G. S., Zoofan, B. and Rokhlin, S., "Pit Growth Study in Al Alloys by the Foil Penetration Technique," J. Electrochem. Soc., Vol.147, 2000, pp. 140-148.
72. Hunkeler, F. and Bohni, H., "Determination of Pit Growth Rates on Aluminum Using a Metal Foil Technique," Corros. Sci., Vol.37, 1981, pp. 645-650.
73. Frankel, G. S., Scully, J. R., and Jahnes, C. V., "Repassivation of Pits in Aluminum Thin Films," J. Electrochem. Soc., Vol.143, 1996, pp. 1834-1840.
74. Frankel, G. S., Dukovic, J. O., Rush, B. M., Brusič, V. and Jahnes, C. V., "Pit Growth in NiFe Thin Films," J. Electrochem. Soc., Vol.139, 1992, pp. 2196-2201.
75. Sehgal, A., Lu, D., and Frankel, G. S., "Pitting in Aluminum Thin Films: Supersaturation and Effects of Dichromate Ions," J. Electrochem. Soc., Vol.145, 1998, pp. 2834-2840.
76. Shih, H. and Mansfeld, F., "A Pitting Procedure for Impedance Sectra Obtained for Cases of Localized Corrosion," Corrosion (Houston), Vol.45, 1989, pp. 610-614.
77. Brusic, V., Russak, M., Schad, R., Prankel, G., Selius, A., and DiMilia, D., "Corrosion of Thin Film Magnetic Disk: Galvanic Effects of the Carbon Overcoat," J. Electrochem. Soc., Vol.136, 1989, pp. 42-46.
78. Mansfeld, F. and Kenkel, J. V., "Electrochemical Monitoring of Atmospheric Corrosion Phenomena," Corros. Sci., Vol.16, 1976, pp. 111-122.
79. Mansfeld, F., "Monitoring of Atmospheric Corrosion Phenomena with Electrochemical Sensors," J. Electrochem. Soc., Vol.135, 1988, pp. 1354-1358.
80. [80] Cox, A. and Lyon, S. B., Electrochemical Study of the Atmospheric Corrosion of Mild Steel-I. Experimental Method, Corros. Sci., 36, 1994, pp. 1167-1176. (Pubitemid 282367)
81. [81] Cox, A. and Lyon, S. B., Electrochemical Study of the Atmospheric Corrosion of Mild Steel-III. The Effect of Sulphur Dioxide, Corros. Sci., 36, 1994, pp. 1193-1199. (Pubitemid 282369)
82. Cox, A. and Lyon, S. B., "Electrochemical Study of the Atmospheric Corrosion of Iron-II. Cathodic and Anodic Processes on Uncorroded and Pre-Corroded," Corros. Sci., Vol.36, 1994, pp. 1177-1192.
83. Zhang, S. H. and Lyon, S. B., "Anodic Processes on Iron Covered by Thin, Dilute Electrolyte Layers (I)-Anodic Polarization," Corros. Sci., Vol.36, 1994, pp. 1289-1307.
84. Zhang, S. H. and Lyon, S. B., "Anodic Processes on Iron Covered by Thin, Dilute Electrolyte Layers (II)-a.c. Impedance Measurements," Corros. Sci., Vol.36, 1994, pp. 1309-1321.
85. [85] Stratmann, M. and Streckel, H., On the Atmospheric Corrosion of Metals, Which are Covered with Thin Electrolyte Layers Part 1: Verification of the Experimental Technique, Corros. Sci., 30, 1990, pp. 681-696. (Pubitemid 20735865)
86. [86] Stratmann, M. and Streckel, H., On the Atmospheric Corrosion of Metals, Which are Covered with Thin Electrolyte Layers Part 2: Experimental Results, Corros. Sci., 30, 1990, pp. 697-714. (Pubitemid 20735866)
87. Stratmann, M., Streckel, H., Kim, K. T. and Crockett, S., "On the Atmospheric Corrosion of Metals, Which are Covered with Thin Electrolyte Layers Part 3: The Measurement of Polarization Curves on Metal Surfaces Which are Covered by Thin Electrolyte Layers," Corros. Sci., Vol.90, 1990, pp. 715-734.
88. Frankel, G. S., Stratmann, M., Rohwerder, M., Michalik, A., Maier, B., Dora, J. and Wicinski, M., "Potential Control Under Thin Aqueous Layers Using a Kelvin Probe," Corros. Sci., Vol.49, 2007, pp. 2021-2036.
89. Nishikata, A., Ishihara, Y., Hayashi, Y. and Tsuru, T., "Influence of Electrolyte Layer Thickness and pH on the Initial Stage of the Atmosphere Corrosion of Iron," J. Electrochem. Soc., Vol.144, 1997, pp. 1244-1252.
90. Nishikata, A., Ishihara, Y., and Tsuru, T., "An Application of Electrochemical Impedance Spectroscopy to Atmospheric Corrosion Study," Corros. Sci., Vol.37, 1995, pp. 897-911.
91. Nishikata, A., Yamashita, Y., Katayama, H., Tsuru, T., Usami, A., Tanabe, K. and Mabuchi, H., "An Electrochemical Impedance Study on Atmospheric Corrosion of Steels in a Cyclic Wet-Dry Condition," Corros. Sci., Vol.37, 1995, pp. 2059-2069.
92. Vera Cruz, R. P., Nishikata, A. and Tsuru, T., "AC Impedance Monitoring of Pitting Corrosion of Stainless Steel Under a Wet-Dry Cyclic Condition in Chloride-Containing Environment," Corros. Sci., Vol.38, 1996, pp. 1397-1406.
93. Vera Cruz, R. P., Nishikata, A. and Tsuru, T., "Pitting Corrosion Mechanism of Stainless Steels Under Wet-Dry Exposure in Chloride-Containing Environments," Corros. Sci., Vol.40, 1998, pp. 125-139.
94. Tsutsumi, Y., Nishikata, A. and Tsuru, T., "Anodic Behavior of Iron in Acid Solutions," J. Electrochem. Soc., Vol.152, 2005, pp. B358-B363.
95. ASTM, Standard G34-01, "Standard Test Method for Exfoliation Corrosion Susceptibility in 2xxx and 7xxx Series Aluminum Alloys(EXCO Test)," Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2004.
96. Lee, S. and Lifka, B. W., "Modification of the EXCO Test Method for Exfoliation Corrosion Susceptibility in 7XXX, 2XXX and Aluminum-Lithium Alloys," in New Methods for Corrosion Testing of Aluminum Alloys, ASTM STP 1134, V. S. Agarwala and G. M. Ugiansky, Eds., ASTM International, West Conshohocken, PA, 1992.
97. Evans, D. G. and Jeffrey, P. W., "Exfoliation Corrosion of AlZnMg Alloys," U.R. Evans Conference on Localized Corrosion, NACE-3, Houston, TX, 1974.
98. Haynes, G. S. and Baboian, R., "Modified Salt Spray (Fog) Testing, Laboratory Corrosion Tests and Standards," m ASTM Standard G85-85A2, STP 866, ASTM International, West Conshohocken, PA, 1985.
99. Lifka, B. W. and Sprowls, D. O., "An Improved Exfoliation Test for Aluminum Alloys," Corrosion (Houston), Vol.22, 1966, pp. 7-15.
100. Sprowls, D. O., Walsh, J. D. and Shumaker, M. B., "Simplified Exfoliation Testing of Aluminum Alloys," in Localized Corrosion-Cause of Metal Failure, ASTM STP 516, ASTM International, West Conshohocken, PA, 1972.
101. Braun, R., "Exfoliation Corrosion Testing of Aluminum Alloys," Br. Corros. J., London, Vol.30, 1995, pp. 203-208.
102. Lifka, B. W. and Sprowls, D. O., "Relationship of Accelerated Test Methods for Exfoliation Resistance in 7xxx Series Aluminum Alloys with Exposure to a Seacoast Atmosphere," in ASTM Special Technical Publication 558, ASTM International, West Conshohocken, PA, 1973.
103. Sprowls, D. O., Summerson, T. J. and Loftin, F. E., "Exfoliation Corrosion Testing of 7075 and 7178 Aluminum Alloys-Interim Report on Atmospheric Exposure Tests," ASTM International, West Conshohocken, PA, 1973.
104. Liddiard, E. A. G., Whittaker, J. A. and Farmery, H. K., "The Exfoliation Corrosion of Aluminum Alloys," J. Inst. Met., Vol.89, 1960-1961, pp. 377-384.
105. Zhao, X. and Frankel, G. S., "Effects of RH, Temper and Stress on Exfoliation Corrosion Kinetics of AA7178," Corrosion (Houston), Vol.62, 2006, pp. 256-266.
106. Zhao, X. and Frankel, G. S., "Quantitative Study of Exfoliation Corrosion: Exfoliation of Slices in Humidity Technique," Corros. Sci., Vol.49, 2007, pp. 920-938.
107. Knipping, E. M., Lakin, M. J., Foster, K. L., Jungwirth, P., Tobias, D. J., Gerber, R. B., Dabdub, D. and Finlayson-Pitts, B. J., "Experiments and Simulations of Ion-Enhanced Interfacial Chemistry on Aqueous NaCl Aerosols," Science, Vol.288, 2000, pp. 301-306.
108. Pistorius, P. C., in 14th International Corrosion Council, published on CD-ROM Capetown, S.A., 1999.
109. Kang, J. and Frankel, G. S., "Potentiostatic Pulse Testing for Assessment of Early Coating Failure," Z. Phys. Chem., Vol.219, 2005, pp. 1519-1538.
110. Rohwerder, M., Leblanc, P., Frankel, G. S. and Stratmann, M., "Application of Scanning Kelvin Probe in Corrosion Science," in Analytical Methods in Corrosion Science and Engineering, P. Marcus and R Mansfeld, Eds., CRC Press, Boca Raton, FL, 2006.
111. Stratmann, M., "2005 W. R. Whitney Award Lecture: Corrosion Stability of Polymer-Coated Metals-New Concepts Based on Fundamental Understanding," Corrosion (Houston), Vol.661, 2005, pp. 1115-1126.
112. Zhao, J., Frankel, G. S. and McCreery, R. L., "Corrosion Protection of Untreated AA2024-T3 in Chloride Solution by Chromate Conversion Coating Monitored with Raman Spectroscopy," J. Electrochem. Soc., Vol.145, 1998, pp. 2258-2264.
113. Buchheit, R. G., Mamidipally, S. B., Schmutz, P. and Guan, H., "Active Corrosion Protection in Ce-Modified Hydrotalcite Conversion Coatings," Corrosion (Houston), Vol.58, 2002, pp. 3-14.
114. Buchheit, R. G., Cunningham, M., Jensen, H., Kendig, M. W. and Martinez, M. A., "A Correlation Between Salt Spray and Electrochemical Impedance Spectroscopy Test Results for Conversion-Coated Aluminum Alloys," Corrosion (Houston), Vol.51, 1998, pp. 61-72.