Tailoring the response time of shape memory alloy wires through active cooling and pre-stress

Journal of Intelligent Material Systems and Structures

Volumn 21, Issue 1, 2010, Pages 19-40

  Tadesse, Yonas ^a   Thayer, Nicholas ^a   Priya, Shashank ^a  

^a State University   (United States)

Author keywords

Active cooling; Actuator; Pre stress; Response time; Shape memory alloy

Indexed keywords

ACTIVE COOLING; ACTUATION CAPABILITY; BIO-METAL FIBERS; CONTROLLING FACTORS; COOLING CYCLE; ELECTRICAL STIMULI; FLUID FLOW; FORCE RESPONSE; HEAT SINKING; HEAT TRANSFER RATE; LOW FREQUENCY; PRE-STRESS; RESPONSE TIME; SHAPE MEMORY ALLOY; SHAPE MEMORY ALLOY ACTUATORS; SHAPE MEMORY ALLOY WIRE; SLOW COOLING; SMA ACTUATORS; TIME DOMAIN; TIME DOMAIN RESPONSE; TRANSFORMATION BEHAVIOR;

ACTUATORS; ALLOYS; FLOW OF FLUIDS; SHAPE MEMORY EFFECT; TIME DOMAIN ANALYSIS;

COOLING;

EID: 76349101697     PISSN: 1045389X     EISSN: 15308138     Source Type: Journal    
DOI: 10.1177/1045389X09352814     Document Type: Article

References (45)

1. Akle, B.J., Bennett, M.D. and Leo, D.J. 2006. High-strain Ionomeric-ionic Liquid Electroactive Actuators, Sensors & Actuators: A: Physical, 126: 173-181.
2. Ashrafiuon, H., Eshraghi, M. and Elahinia, M.H. 2006. Position Control of a Three-link Shape Memory Alloy Actuated Robot, Journal of Intelligent Material Systems and Structures, 17: 381-392. (Pubitemid 43672736)
3. Baughman, R.H. 2005. Playing Natures Game with Artificial Muscles, Science, 308: 63-65.
4. Bergamasco, M., Salsedo, F. and Dario, P. 1989. A Linear SMA Motor as Direct-drive Robotic Actuator In: Proceedings of IEEE Conference on Robotics and Automation, Vol. 1, pp. 618-623.
5. Bertacchini, O.W., Lagoudas, D.C., Calkins, F.T. and Mabe, J.H. 2008. Thermomechanical Cyclic Loading and Fatigue Life Characterization of Nickel Rich NiTi Shape-memory Alloy Actuators In: Proceedings of SPIE, Vol. 6929: 692916.
6. Boyd, J.G. and Lagoudas, D.C. 1994. Thermomechanical Response of Shape Memory Composites Journal of Intelligent Material. Systems and Structures, 5: 333-346.
7. Choi, J.M., Son, H.M. and Lee, Y.J. 2008. Design of Biomimetic Robot-eye System with Single Vari-focal Lens and Winding-type SMA Actuator In: International Conference on Control, Automation and Systems 2008, 14-17 October, COEX, Seoul, Korea.
8. Hara, S., Zama, T., Takashima, W. and Kaneto, K. 2006. Tris(trifluoromethylsulfonyl) methide-doped Polypyrrole as a Conducting Polymer Actuator with Large Electrochemical Strain, Synthetic Metals, 156: 351-355.
9. Howe, R.D., Kontarinis, D.A. and Peine, W.J. 1995. Shape Memory Alloy Actuator Controller Design for Tactile Displays, In: Proceedings of IEEE Conference on Decision and Control, IEEE, Vol. 4, pp. 3540-3544.
10. Huang, W. and Wong, Y.L. 1999. Effects of Pre-strain on Transformation Temperature of NiTi Shape Memory Alloy, Journal of Materials Science Letters, 18: 1797-1798.
11. Hunter, I.W., Lafontaine, S., Hollerbach, J.M. and Hunter, P.J. 1991. Fast Reversible NiTi Fibers for Use in Microrobotics In: Proceedings of IEEE Conference on Micro Electro Mechanical Systems, pp. 166-170.
12. Incropera, F.P., DeWitt, D.P., Bergman, T.L. and Lavine, A.S. 2007. Fundamentals of Heat and Mass Transfer, Hoboken, New Jersey. Jayender, J., Patel, V., Nikumb, S. and Ostojic, M. 2005. Modelling and Gain Scheduled Control of Shape Memory Alloy Actuators In: Proceedings of the 2005 IEEE Conference on Control Applications, Toronto, Ontario.
13. Kornbluh, R., Perline, R., Eckerle, J. and Joseph, J. 1998. Electrostrictive Polymer Artificial Muscle In: Proceedings of IEEE Conference on Robotics and Automation, Vol. 3, pp. 2147-2154.
14. Kornbluh, R., Pelrine, R., Pei, Q., Oh, S. and Joseph, J. 2000. Ultrahigh Strain response of Field-actuated Elastomeric Polymers In: Bar-Cohen, Y (ed.), Proceedings of SPIE, Smart Structure and Materials, 2000: Electroactive Polymer Actuators and Devices (EAPAD), Vol. 3987, pp. 51-64.
15. Kumar, P.K., Lagoudas, D.C., Zanca, K.J. and Lagoudas, M.Z. 2006. Thermomechanical Characterization of High Temperature SMA Actuators In: Armstrong, W.D. (eds), Proceedings of the SPIE, Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics, Vol. 6170, pp. 306-312.
16. Kusagawa, M., Nakamura, T. and Asada, Y. 2001. Fundamental Deformation and Recovery Behaviors of Ni-Ti-Nb Shape Memory Alloy, JSME International Journal Series A, 44: 57-63.
17. Lagoudas, D.C., Miller, D.A., Rong, L. and Kumar, P.K. 2009. Thermomechanical Fatigue of Shape Memory Alloys Smart Materials and Structures, 18: 085021.
18. Leo, D.J. 2007. Engineering Analysis of Smart Material Systems: Analysis, Design, and Control, John Wiley and Sons, New York.
19. Li, Y., Cui, L., Shi, P. and Yang, D. 2001. Phase Transformation Behaviors of Prestrained TiNi Shape Memory Alloy Fibers Under the Constraint of a Hard Substrate, Materials Letters, 49: 224-227. (Pubitemid 32543623)
20. Loh, C.S., Yokoi, H. and Arai, T. 2005 a. Improving Heat Sinking in Ambient Environment for the Shape Memory Alloy (SMA) In: Proceedings of IEEE Conference on Intelligent. Robots and Systems, pp. 3560-3565.
21. Loh, C.S., Yokoi, H. and Arai, T. 2005 b. New Shape Memory Alloy Actuator: Design and Application in the Prosthetic Hand In: Proceedings of the 27th Annual Conference of the IEEE Engineering in Medicine and Biology, 1-4, September, Shanghai, China.
22. Lubliner, J. and Auricchio, F. 1996. Generalized Plasticity and Shape Memory Alloys, International Journal of Solids and Structures, 33: 991-1003.
23. Luo, Y., Takagi, T., Maruyama, S. and Yamada, M. 2000. A Shape Memory Alloy Actuator using Peltier Modules and R-phase Transition, Journal of Intelligent Material Systems and Structures, 11: 503-511.
24. Luchetti, T., Zanella, A., Biasiotto, M. and Saccagno, A. 2009. Electrically Actuated Antiglare Rear-view Mirror Based on a Shape Memory Alloy Actuator Journal of Materials Engineering and Performance, 18: 717-724.
25. Madden, P.G.A., Madden, J.D.W., Anquetil, P.A., Vandesteeg, N.A. and Hunter, I.W. 2004. The Relationship of Conducting Polymer Actuator Material Properties to Performance, IEEE Journal of Oceanic Engineering, 29: 696-705.
26. McNichols, J.L. and Brooks, P.C. 1981. NiTi Fatigue Behavior, Journal of Applied Physics, 52: 7442-7444.
27. Moallem, M. and Tabrizi, V. 2009. Tracking Control of an Antagonistic Shape Memory Alloy Actuator Pair IEEE Transactions on Control Systems Technology, 17: 184-190.
28. Nascimento, M.M.S.F. and Araujo, C.J. 2006. Electro-thermomechanical Characterization of Ti-Ni Shape Memory Alloy Thin Wires Materials Research, 9: 15-19.
29. Oh, H.U., Izawa, K. and Taniwaki, S. 2005. Development of Variable-damping Isolator using Bio-metal Fiber for Reaction Wheel Vibration Isolation, Smart Materials And Structures, 14: 928-933.
30. Otsuka, K. and Wayman, C.M. 1999. Shape Memory Materials, Cambridge University Press, Cambridge, UK.
31. Patoor, E. and Berveiller, M. 1997. Micromechanical Modelling of the Thermomechanical Behavior of Shape Memory Alloys In: Berveiller, M. and Fischer, F.D. (eds), Mechanics of Solids with Phase Changes, pp. 121-188, Springer-Verlag, Wien, New York.
32. Pons, J.L., Reynaerts, D., Peirs, J., Ceres, R. and VanBrussel, H. 1997. Comparison of Different Control Approaches to Drive SMA Actuators In: Proceedings of the IEEE Conference on Advanced Robotics, pp. 819-824.
33. Qiu, J., Tani, J., Osanai, D., Urushiyama, Y. and Lewinnek, D. 2000. High-speed Response of SMA Actuators In: Proceedings of International Journal of Applied Electromagnetics and Mechanics, Vol. 12, pp. 87-100.
34. Reynaerts, D. and Van Brussel, H. 1991. Development of a SMA High Performance Robotic Actuator In: Proceedings of the IEEE Conference on Advanced Robotics, Vol. 1, pp. 61-66.
35. Russell, R.A. and Gorbert, R.B. 1995. Improving the Response of SMA Actuators In: Proceedings of the IEEE Conference on Robotics and Automation, Vol. 3, pp. 2299-2304.
36. Shaw, J.A. 2000. Simulations of Localized Thermo-mechanical Behavior in a NiTi Shape Memory Alloy, International Journal of Plasticity, 16: 541-562.
37. Shiraishi, Y., Yambe, T., Sekine, K., Saijo, Y., Wang, Q., Liu, H. et al 2005. Development of an Artificial Myocardium Using a Covalent Shape-memory Alloy Fiber and its Cardiovascular Diagnostic Response In: Proceedings of the 27th Annual Conference of the IEEE Engineering in Medicine and Biology, pp. 406-408.
38. Tadesse, Y., Priya, S., Stephanou, H., Popa, D. and Hanson, D. 2006. Piezoelectric Actuation and Sensing for Facial Robotics, Ferroelectrics, 345 (1). 13-25.
39. Tadesse, Y. and Priya, S. 2008. Humanoid Face Utilizing Rotary Actuator and Piezoelectric Sensors, In: IMECE 2008: Mechanics of Solids, Structures and Fluids, Vol. 12, pp. 573-581.
40. Tanaka, K., Nishimura, F. and Tobushi, H. 1994. Phenomenological Analysis on Subloops in Shape Memory Alloys Due to Incomplete Transformations Journal of Intelligent Material. Systems and Structures, 5 (4). 487-493.
41. Tobushi, H., Nakahara, T., Shimeno, Y. and Hashimoto, T. 2000. Low-cycle Fatigue of TiNi Shape Memory Alloy and Formulation of Fatigue Life, Transacations of ASME, 122: 186-191.
42. Villanueva, A., Bresser, S., Chung, S., Tadesse, Y. and Priya, S. 2009. Jellyfish Inspired Underwater Unmanned Vehicle In: Proceedings of SPIE, Vol. 7287, p. 72871G.
43. Wada, K. and Liu, Y. 2005. Shape Recovery of NiTi Shape Memory Alloy under Various Pre-strain and Constraint Conditions, Smart Materials and Structures, 14: S273 - S286.
44. Yan, X. and Nie, J. 2003. Study of a New Application Form of Shape Memory Alloy Superelasticity, Journal of Smart Materials and Structures, 12: N14 - N23.
45. Zhou, B. and Yoon, S.H. 2006. A New Phase Transformation Constitutive Model of Shape Memory Alloys, Journal of Smart Materials and Structures, 15: 1967-1973. (Pubitemid 46069480)