Constitutive contact laws in structural dynamics

CMES - Computer Modeling in Engineering and Sciences

Volumn 48, Issue 3, 2009, Pages 303-336

  Willner, K ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Damping; Friction; Joints; Structural dynamics

Indexed keywords

CONSTITUTIVE BEHAVIORS; CONTACT AREAS; CONTACT LAWS; CONTACT MODELS; CONTACT STIFFNESS; DOUBLE-BEAM; DYNAMIC BEHAVIORS; FINITE ELEMENT CODES; FRICTION JOINTS; JOINTS; MICRO-SLIP; NUMERICAL SIMULATION; PRESSURE DEPENDENT; ROUGH SURFACES; TANGENTIAL DIRECTIONS;

COMPUTER SIMULATION; DAMPING; END EFFECTORS; FRICTION;

STRUCTURAL DYNAMICS;

EID: 76049087583     PISSN: 15261492     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (82)

1. Ahmadian, H.; Ebrahimi, M.; Mottershead, J. E.; Friswell, M. I. (2002): Identification of bolted-joint interface models. In Proceedings of ISMA2002, volume IV, pp. 1741-1747. K.U. Leuven.
2. Ahmadian, H.; Mottershead, J. E.; James, S.; Friswell, M. I.; Reece, C. A. (2006): Modelling and updating of large surface-to-surface joints in the awe-mace structure. Mechanical Systems and Signal Processing, vol.20, pp. 868-880.
3. Allwood, J. (2005): Survey and performance assessment of solution methods for elastic rough contact problems. Journal of Tribology, vol.127, pp. 10-23.
4. Archard, J. F. (1957): Elastic deformation and the laws of friction. Proceedings of the Royal Society of London, Series A, vol.243, pp. 190-205.
5. Berger, E. J.; Krousgrill, C. M. (2002): On friction damping modelling using bilinear hysteresis elements. Journal of Vibration and Acoustics, vol.124, pp. 367-375.
6. Berry, M. V.; Blackwell, T. M. (1981): Diffractal echoes. Journal of Physics A, vol.14, pp. 3101-3110.
7. Bliman, P.-A. (1992): Mathematical study of the Dahl's friction model. European Journal of Mechanics. A/Solids, vol.11, pp. 835-848.
8. Borri-Brunetto, M.; Carpinteri, A.; Chiaia, B. (1998): Lacunarity of the contact domain betweeen elastic bodies with rough boundaries. In Frantziskonis, G.(Ed): PROBAMAT - 21st Century: Probabilities and Materials, pp. 45-66, Dordrecht. Kluwer.
9. Bouc, R. (1957): Forced vibrations of a mechanical system with hysteresis. In Proc. of the 4th Conference on Nonlinear Oscillations, pg. 315.
10. Bush, A. W.; Gibson, R. D.; Thomas, T. R. (1975): The elastic contact of a rough surface. Wear, vol.35, pp. 87-111.
11. Ciavarella, M.; Demelio, G.; Barber, J. R.; Jang, Y. H. (2000): Linear elastic contact of the Weierstrass profile. Proceedings of the Royal Society of London, Series A, vol.456, pp. 387-405.
12. Dahl, P. (1976): Solid friction damping of mechanical vibrations. AIAA Journal of Guidance, Control, and Dynamics, vol.14, pp. 1675-1682.
13. de Wit, C. C.; Olsson, H.; Aström, K. J.; Lischinsky, P. (1995): A new model for control of systems with friction. IEEE Transactions on Automatic Control, vol.40, pp. 419-425.
14. Dohner, J. L. (2001): On the development of methodologies for constructing predictive models of structures with joints and interfaces. White Paper SAND2001- 0003P, Sandia National laboratories, Albuquerque, 2001.
15. Dydo, J. R.; Busby, H. R. (1995): Elasticity solutions for constant and linearly varying loads applied to a rectangular surface patch on the elastic halfspace. Journal of Elasticity, vol.38, pp. 153-163.
16. Earles, S. W.; Beards, C. F. (1970): Some aspects of frictional damping as applied to vibrating beams. International Journal of Machine Tool Design and research, vol.10, pp. 123-131.
17. Feeny, B.; Guran, A.; Hinrichs, N.; Popp, K. (1998): A historical review on dry friction and stick-slip phenomena. Applied Mechanics Reviews, vol.51, pp. 321-341.
18. Ferri, A. A.; Bindemann, A. C. (1992): Damping and vibration of beams with various types of frictional support conditions. Journal of Vibration and Acoustics, vol.114, pp. 289-296.
19. Garikipati, K. (2002): A variational multiscale method to embed micromechanical surface laws in the macromechanical continuum formulation. CMES: Computer Modeling in Engineering &Sciences, vol.3, pp. 175-184.
20. Gaul, L.; Lenz, J. (1997): Nonlinear dynamics of structures assembled by bolted joints. Acta Mechanica, vol.125, no.169-181.
21. Gaul, L.; Nitsche, R. (2000): Dynamics of structures with joint connections. In Ewins, D. J.; Inman, D. J.(Eds): Structural Dynamics@2000: Current Status and Future Directions, pp. 29-48.
22. Gaul, L.; Nitsche, R. (2001): Role of friction in mechanical joints. Applied Mechanics Reviews, vol.54, pp. 93-105.
23. Görke, D.; Willner, K. (2008): Experimental setup for normal contact stiffness measurement of technical surfaces with geometrical irregularities. Experimental Techniques.
24. Görke, D.;Willner, K. (2008): Normal contact of fractal surfaces - Experimental and numerical investigations. Wear, vol.264, pp. 589-598.
25. Hanss, M.; Oexl, S.; Gaul, L. (2002): Identification of a bolted-joint model with fuzzy parameters loaded normal to the contact interface. Mechanics Research Communications, vol. 29, no. 2/3, pp. 177-187.
26. Ibrahim, R. A.; Pettit, C. L. (2005): Uncertainties and dynamic problems of bolted joints and other fasteners. Journal of Sound and Vibration, vol.279, pp. 857-936.
27. Ikhouane, F.; Rodellar, J. (2007): Systems with Hysteresis. Wiley, Chichester.
28. Iwan, W. D. (1966): On distributed-element model for hysteresis and its steadystate dynamic response. Journal of Applied Mechanics, vol.33, pp. 893-900.
29. Iwan,W. D. (1967): On a class of models for the yielding behaviour of continuous and composite systems. Journal of Applied Mechanics, vol.34, no.3, pp. 612-617.
30. Jackson, R. L.; Kogut, L. (2006): A comparison of flattening and indentation approaches for contact mechanics modeling of single asperity contacts. Journal of Tribology, vol.128, pp. 209-212.
31. Jacq, C.; Nelias, D.; Lormand, G.; Girodin, D. (2002): Development of a threedimensional semi-analytical elastic-plastic contact code. Journal of Tribology, vol.124, pp. 653-667.
32. Jalali, H.; Ahmadian, H.; Mottershead, J. E. (2007): Identification of nonlinear bolted lap-joint paramters by force-state mapping. International Journal of Solids and Structures, vol.44, pp. 8087-8105.
33. Jenkin, C. F. (1922): A mechanical model illustrating the behaviour of metals under static and alternating loads. Engineering, vol.17, pp. 603.
34. Ju, Y.; Farris, T. N. (1996): Spectral analysis of two-dimensional contact problems. Journal of Tribology, vol.118, pp. 320-328.
35. Kalker, J. J. (1977): Variational principles of contact elastostatics. Journal of the Institute of Mathematics and its Applications, vol.20, pp. 199-219.
36. Kalker, J. J. (1979): The computation of three-dimensional rolling contact with dry friction. International Journal for Numerical Methods in Engineering, vol.14, pp. 1293-1307.
37. Kalker, J. J. (1990): Three-Dimensional Elastic Bodies in Rolling Contact. Springer, Heidelberg.
38. Kalker, J. J.; van Randen, Y. (1972): A minimum principle for frictionless elastic contact with application to non-Hertzian half-space contact problems. Journal of Engineering Mathematics, vol.6, pp. 193-206.
39. Karpenko, Y. A.; Akay, A. (2002): A numerical method for analysis of extended rough wavy surfaces in contact. Journal of Tribology, vol.124, pp. 668-679.
40. Komvopoulos, K.; Ye, N. (2001): Three-dimensional contact analysis of elasticplastic layered media with fractal surface topographies. Journal of Tribology, vol.123, pp. 632-640.
41. Lee, S. C.; Ren, N. (1996): Behavior of elastic-plastic rough surface contacts as affected by surface topography, load and material hardness. Tribology Transactions, vol.39, pp. 67-74.
42. Lenz, J.; Gaul, L. (1995): The influence of microslip on the dynamic behaviour of bolted joints. In Proceedings of the 13th IMAC, Nashville, Tennessee, volume I, pp. 248-254.
43. Li, J.; Berger, E. (2001): A Boussinesq-Cerutti solution set for constant and linear distribution of normal and tangential load over triangular area. Journal of Elasticity, vol.63, pp. 137-151.
44. Li, J.; Berger, E. (2003): A semi-analytical approach to three-dimensional normal contact problems with friction. Computational Mechanics, vol.30, pp. 310-322.
45. Ling, F. F. (1987): Scaling law for contoured length of engineering surfaces. Journal of Applied Physics, vol.62, pp. 2570-2572.
46. Lobitz, D. W.; Gregory, D. L.; Smallwood, D. O. (2001): Comparison of finite element predictions to measurements from the sandia microslip experiment. In Proc. of the International Modal Analysis Conference IMAC XX, Los Angeles, pp. 1388-1394.
47. Ma, X.; Bergman, L.; Vakakis, A. (2001): Identification of bolted joints through laser vibrometry. Journal of Sound and Vibration, vol.246, pp. 441-460.
48. Mackerle, J. (2003): Finite element analysis of fastening and joining: A bibliography (1990-2002). International Journal of Pressure Vessels and Piping, vol.80, pp. 253-271. (Pubitemid 36777523)
49. Majumdar, A.; Tien, C. L. (1990): Fractal characterization and simulation of rough surfaces. Wear, vol.136, pp. 313-327. (Pubitemid 20705835)
50. Mandelbrot, B. (1983): The Fractal Geometry of Nature. Freeman, New York.
51. Mayer, M. H.; Gaul, L. (2007): Segment-to-segment contact elements for modelling joint interfaces in finite element analysis. Mechanical Systems and Signal Processing, vol.21, pp. 724-734.
52. Menq, C. H.; Bielak, J.; Griffin, J. H. (1986): The influence of microslip on vibratory response. Journal of Sound and Vibration, vol.107, no.2, pp. 279-307.
53. Miller, J. D.; Quinn, D. D. (2009): A two-sided interface model for dissipation in structural systems with frictional joints. Journal of Sound and Vibration, vol.321, pp. 201-219.
54. Mindlin, R. D. (1949): Compliance of elastic bodies in contact. Journal of Applied Mechanics, vol.16, pp. 259-268.
55. Nelias, D.; Antaluca, E.; Boucly, V.; Cretu, S. (2007): A three-dimensional semianalytical model for elastic-plastic sliding contacts. Journal of Tribology, vol.129, pp. 761-771.
56. Ogilvy, J. A. (1992): Numerical simulation of elastic-plastic contact between anisotropic rough surfaces. Journal of Physics D, vol.25, pp. 1798-1809.
57. Pian, H.; Hallowell, C. (1951): Structural damping in a simple built-up beam. In Proceedings of the first US Congress of Applied Mechanics.
58. Polonsky, I. A.; Keer, L. M. (2000): A fast and accurate method for numerical analysis of elastic layered contacts. Journal of Tribology, vol.122, pp. 30-35.
59. Polonsky, I. A.; Keer, L. M. (2000): Fast methods for solving rough contact problems: A comparative study. Journal of Tribology, vol.122, pp. 36-41.
60. Quinn, D. D.; Segalman, D. J. (2005): Using series-series Iwan-type models for understanding joint dynamics. Journal of Applied Mechanics, vol.72, pp. 666-673.
61. Ren, N.; Lee, S. C. (1993): Contact simulation of three-dimensional rough surfaces using moving grid method. Journal of Tribology, vol.115, pp. 597-601.
62. Ren, N.; Lee, S. C. (1994): The effects of surface roughness and topography on the contact behavior of elastic bodies. Journal of Tribology, vol.116, pp. 804-811.
63. Sainsot, P.; Jacq, C.; Nelias, D. (2002): A numerical model for elastoplastic rough contact. CMES: Computer Modeling in Engineering &Sciences, vol.3, pp. 497-506.
64. Sayles, R. S. (1996): Basic principles of rough surface contact analysis using numerical methods. Tribology International, vol.29, pp. 639-650.
65. Segalman, D. J. (2005): A four-parameter Iwan model for lap-type joints. Journal of Applied Mechanics, vol.72, pp. 752-760.
66. Segalman, D. J. (2006): Modelling joint friction in structural dynamics. Structural Control and Health Monitoring, vol.13, pp. 430-453.
67. Segalman, D. J.; Paez, T.; Smallwood, D.; Sumali, A.; Urbina, A. (2003): Status and integrated road-map for joints modeling research. Sandia report sand2003- 0897, Sandia National Laboratories, 2003.
68. Sellgren, U.; Olofsson, U. (1999): Application of a constitutive model for microslip in finite element analysis. Computer Methods in Applied Mechanics and Engineering, vol.170, pp. 65-77.
69. Song, Y.; Hartwigsen, C. J.; McFarland, D. M.; Vakakis, A. F.; Bergman, L. A. (2004): Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements. Journal of Sound and Vibration, vol.273, pp. 249-276.
70. Song, Y.; McFarland, D. M.; Bergman, L. A.; Vakakis, A. F. (2005): Stickslip- slap interface response simulation: Formulation and application of a general joint/interface element. CMES: Computer Modeling in Engineering &Sciences, vol.10, pp. 153-170.
71. Stanley, H. M.; Kato, T. (1997): An FFT-based method for rough surface contact. Journal of Tribology, vol.119, pp. 481-485.
72. Tian, X.; Bhushan, B. (1996): A numerical three-dimensional model for the contact of rough surfaces by variational principle. Journal of Tribology, vol.118, pp. 33-42. (Pubitemid 126551546)
73. Varadi, K.; Neder, Z. (1996): Three-dimensional contact analysis of real rough surfaces. In Bartz, W. J.(Ed): Tribology - Solving Friction and Wear Problems, volume 2, pp. 1037-1046, Ostfildern. Technische Akademie Esslingen.
74. Vollebregt, E. A. H. (1995): A Gauss-Seidel type solver for special convex programs, with application to frictional contact mechanics. Journal of Optimization Theory and Applications, vol.87, pp. 47-67.
75. Wang, F.; Keer, L. M. (2005): Numerical simulation for three dimensional elastic-plastic contact with hardening behavior. Journal of Tribology, vol.127, pp. 494-502.
76. Wang, S.; Komvopoulos, K. (1994): A fractal theory of the interfacial temperature distribution in the slow sliding regime: Part I - elastic contact and heat transfer analysis. Journal of Tribology, vol.116, pp. 812-823.
77. Warren, T. L.; Krajcinovic, D. (1996): Random Cantor set models for the elastic-perfectly plastic contact of rough surfaces. Wear, vol.196, pp. 1-15.
78. Webster, M. N.; Sayles, R. S. (1986): A numerical model for the elastic frictionless contact of real rough surfaces. Journal of Tribology, vol.108, pp. 314-320.
79. Wen, Y. K. (1989): Methods of random vibrations for inelastic structures. Applied Mechanics Reviews, vol.42, pp. 39-52.
80. Willner, K. (2004): Elasto-plastic normal contact of three-dimensional fractal surfaces using halfspace theory. Journal of Tribology, vol.126, pp. 28-33.
81. Willner, K. (2008): Fully coupled frictional contact using elastic halfspace theory. Journal of Tribology, vol.130, pp. 031405-1-031405-8.
82. Willner, K. (2008): Influence of surface parameters on the elastoplastic contact behavior of fractal-regular surfaces. Journal of Tribology, vol.130, pp. 024502- 1-024502-6.