A historical review on dry friction and stick-slip phenomena

Applied Mechanics Reviews

Volumn 51, Issue 5, 1998, Pages 321-341

  Feeny, Brian ^a   Guran, Ardéshir ^b   Hinrichs, Nikolaus ^c   Popp, Karl ^c  

^a Michigan State University   (United States)

^b UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

^c LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

HISTORY; MATHEMATICAL MODELS; TRIBOLOGY;

DRY FRICTION; STICK SLIP;

FRICTION;

EID: 0032073390     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3099008     Document Type: Article

References (304)

1. Abdelhamid MK (1995), Structural instability test: analysis of brake squeal, Proc 1995 Noise Vibration Conf, SAE P-291, 1/2, 389-395.
2. Abdelhamid MK (1995), Creep groan of disk brakes, Proc 1995 Noise Vibration Conf, SAE P-291, 1/2, 396-400.
3. Alifov AA and Frolov KV (1977), Oscillations in systems with dry friction and with restricted excitation. Mekanika Tverdogo Tela 12(4) 57-65.
4. Amontons G (1699), Mémoires de V Académie des Sciences, 203-222.
5. Anand A and Soom A (1984), Roughness-induced transient loading at a sliding contact during start-up, J Trib 106 49-53.
6. Anderson JR and Ferri AA (1990), Behaviour of a single-degree-of-freedom system with a generalized friction law,-J Sound Vib 140(2) 287-304.
7. Andrew C, Cockbum JA and Waring AE (1967), Metal surfaces in contact under normal forces: Some dynamic stiffness and damping characteristics. Proc Instructional Mechanical Engineers 182 92-100.
8. Antoniou SS, Cameron A, and Gently CR (1976), Friction-speed relation from stick-slip data, Wear 36 235-254.
9. Archard JF (1974), Surface topography and tribology, Tribiology Int, Oct, 213-220.
10. Arkadiev V (1945), Hovering of a magnet over a superconductor, J Phys USSR 9 148.
11. Armstrong-Helouvry B, Dupont P, and Canudas de Wit C (1994), A survey of models, analysis tools and compensation methods for the control of machines with friction, Automatica 30(7) 1083-1138.
12. Aronov V, D'Souza AF, Kallpakijan S, and Shareef I (1984), Interaction among friction, wear and system stiffness, Parts 1 and 2, J Lubrication Tech 106 54-69.
13. Ashley S (1994), Is the CVT the car transmission of the future? Mech Eng 116(11)64-68.
14. Asimov I (1966), Understanding Physics, Volume II: Light, Magnetism, and Electricity, George Allen and Unwin, London.
15. Aubin J-P and Celina A (1984), Differential Inclusions: Set Valued Maps and Viability Theory, Springer, Berlin.
16. Awrejcewicz J and Delfs J (1990), Dynamics of a self-excited stick-slip oscillator with two degrees of freedom, part two: slip-stick, slip-slip, stick-slip transitions, periodic and chaotic orbits, European J Mech A/Solids 9(5) 397-418.
17. Balfour H (1976), The Natural History of the Musical Bow, Longwood Press, Portland ME.
18. Beams JW (1937), High rotation speeds, J AppI Phys 8 795-806.
19. Beck T (1899), Beiträge zur Geschichte des Maschinenbaues, Berlin: Julius-Springer Verlag.
20. Belidor BF (1737), Architecture Hydraulique, ou l'Art de Conduire dElever et de Menager les Eaux, Paris: Jombert CA.
21. Bell R and Burdekin M (1969-1970), A study of the stick-slip motion of machine tool fed drives, Proc Inst Mech Eng, 184(30) 534-560.
22. Bengisu MT and Akay A (1992), Stability of friction-induced vibrations in multi-degree-of freedom systems, Friction-Induced Vibration, Chatter, Squeal, and Chaos, Ibrahim RA and Soom A (eds), ASME DE-Vol 49 57-64.
23. Berger BS, Minis I, Chen YH, Chavali A, and Rokni M (1995), Attractor embedding in metal cutting, J Sound Vib 184(5) 936-942.
24. Blong RJ (1984), Volcanic Hazards. A Sourcebook on the Effects of Eruptions, Academic Press, Sydney.
25. Bo LC and Pavalescu D (1982), The friction-speed relation and its influence on the critical velocity of stick-slip motion, Wear 82 277-289.
26. Bochet M, Nouvelles recherches experimentales sur le frottement de glissement, Ann Mines XIX 27-120.
27. Bockman SF (1991), Lyapunov exponents for systems described by differential equations with discontinuous right-hand sides, Proc of American Control Conf1 1673-1678.
28. Bolton HC (1890), Nature 42 389-390.
29. Borodich F (1992), Fractal roughness in contact problems, J Appl Math Mech 56(5) 681-690.
30. Bowden FP and Leben L (1939), The nature of sliding and analysis of friction, Proc of Royal Soc of London A169 371-391.
31. Bowden FP and Tabor D (1959), Reibung und Schmierung fester Körper, Springer
32. Boyer CB and Merzbach UC (1991), A History of Mathematics, Second Edition, Wiley, New York.
33. Braams CM (1952), On the influence of friction on the motion of a top, Physica 18 503-514.
34. Brace WF and Byerlee JD (1966), Stick-slip as a mechanism for earthquakes, Science 153 990-992.
35. Braunbek W (1939), Frei schwebende Körper im elektrischen und magnetischen Feld, ZPhys 112 753-763.
36. Brockley CA and Ko PL (1970), Quasi-harmonic friction-induced vibration, J Lubrication Tech 92 550-556.
37. Brockley CA, Cameron R and Potter AF (1967), Friction induced vibration J Lubrication Technician 89 101-108.
38. Bunge M, Chu J, Groß-Thebing A and Knothe K (1988), Stabilität eines. Reibschwingers unter Verwendung eines konstitutiven Reibgesetzes nach Dietrich und Ruina, ILR-Mitteilungen 197 TU Berlin.
39. Burdekin M, Cowley A and Back N (1978), An elastic mechanism for the microsliding characteristics between contacting surfaces, J Mech Eng Sei 10(3) 121-127.
40. Bürger W (1980), Elementary dynamics of simple mechanical toys, GAMM Mitteilinngen, July, Pt 2, 21-60.
41. Canudas de Wit C, Olsson H, Aström KJ, Lischinsky P (1995), A new model for control of systems with friction, IEEE Trans on Autom Control 40(3) 419-425.
42. Carlson JM and Langer S (1989), Mechanical model of an earthquake fault, Phys Rev A 40(11) 6470-6484.
43. Carlson JM (1991) Time intervals between characteristic earthquakes and correlations with smaller events: An analysis based on a mechanical model of a fault, J Geophys Res 99(3) 4255-4267.
44. Carlson JM, Langer JS, Shaw BE and Tang C (1991), Intrinsic properties of a Burridge-Knopoff model of an earthquake fault, Phys Rev A 44(2) 884-897.
45. Carus-Wilson C (1888), Nature 38 415.
46. Carus-Wilson C (1890), Nature 42 568.
47. Cattaneo C (1938), Sul contatto di due corpi elastici: distribuzione locale degli sforzi, Rend Accad naz Lincei 27(6) 342-348,434-436,474-478.
48. Chan SN (1995), Instabilities at subcritical speeds in disks with rotating frictional follower loads, J Vib Acoust 117 240-242.
49. Chang P-Z (1991), Mechanics of superconducting magnetic bearings, PhD Thesis, Cornell Univ.
50. Chetwynd DG and Ganss MA (1982), The influence of the nominal contact area planform on the friction force, Wear 83 303-309.
51. Childe VG (1956), Rotary motion, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press 187-215.
52. Childe VG (1956), Wheeled vehicles, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 717-729.
53. Chladni EFF (1802), Die Akustik, Leipzig: Breitkopf und Härtel.
54. Cockerham G and Symmons GR (1976), Stability criterion for stick-slip motion using a discontinuous dynamic friction law, Wear 40 113-120.
55. Cole SM (1956), Land transportation without wheels: Roads and bridges, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 704-715.
56. Coulomb CA (1785), Theorie des machines simples, Mémoires de Mathématique et de Physique de V Académie des Sciences, Paris 10 161-331.
57. Crisfïeld MA (1992), A Review of Contact and Friction in Finite Element Analysis, Bimiehill, East Kilbridge, Glasgow NAFEMS.
58. Cumier A (1984), A theory of friction International, J Solids Struct 20(7) 637-647.
59. Curzon GN, Marquis of (1923), Tales of Travel, George H Doran Co, New York.
60. Dai Nianzu (1983), Mechanics, Ancient China's Technology and Science Institute of the History of Natural Sciences, Chinese Académie of Sciences Foreign Language Press, Beijing, 124-138.
61. Davison C St C (1957), Bearings since the stone age: A short history of their development, Engineering, Jan 4, 2-5.
62. Davison C St C (1957/58), Wear prevention in early history, Wear 1 155-159.
63. Davison C St C (1958/59), Wear prevention between 25 BC and 1700 AD, Wear 2 59-63.
64. Deimling K (1992), Multivalued Differential Equations, Berlin: de Gruyter.
65. Demkin NB (1990), Study of the contact of two rough surfaces, Trenie i Iznos 11(6) 1002-1006.
66. Den Hartog JP (1931), Forced vibrations with combined Coulomb and viscous friction, Trans of ASME 53 107-115.
67. Den Hartog JP (1934), Mechanical Vibrations, McGraw Hill. Now on Dover 1985.
68. Den Hartog JP (1972), Nonlinear Vibrations: A Self-Study Subject, Study Guide, Massachusetts Inst of Tech.
69. Deresiewicz H (1757), Oblique contact of nonspherical elastic bodies, J Appl Mech 24 623-624.
70. Desaguliers JT (1734), A Course of Experimental Philosophy, Vols 1 and 2, London.
71. Dieterich JH (1978), Time-dependent friction in the mechanics of stick slip, Pure Appl Geophys 116 790-806.
72. Dieterman HA (1990), Yielding in the contact zone of bodies interacting by dry friction, Wear 331 129-142.
73. Dimarogonas AD and Haddad S (1992), Vibration for Engineers, Prentice Hall, Englewood Cliffs NJ.
74. Dircks H (1870), Perpetuum Mobile, Clowes W and Sons, London.
75. Dowell E H (1986), Damping in beams and plates due to slipping at the support boundaries, J Sound Vib 105(2) 243-253.
76. Dowson D (1979), History ofTribology, New York: Longman.
77. Drescher H (1959), Zur Mechanik der Reibung zwischen festen Körpern, VDI-Z 101(17) 697-732.
78. Drower MS (1956), Water supply, irrigation, and agriculture, A History of Technology, Singer C, Holmyard EJ, and Hall AR, Clarendon Press, 520-557.
79. D'Souza AF and Dweib AH (1990), Self-excited vibrations induced by dry friction, part 2: stability and limit-cycle analysis, J Sound Vib 137 177-190.
80. Dugas R (1955), A History of Mechanics, Editions du Griffon Neuchâtel.
81. Dupont PE (1992), The effect of Coulomb friction on the existence and uniqueness of the forward dynamics problem, Proc of 1992 IEEE Int Conf on Robotics and Automation 1442-1447.
82. Dupont PE and Kasturi PS (1995), Experimental investigation of friction dynamics associated with normal load, Proc of 1995 Design Engineering Tech Confs, Vol 3A, ASME DE-Vol 84-1 1109-1116.
83. Dweib AH and D'Souza AF (1990), Self-excited vibrations induced by dry friction, JSound Vib 137 163-175.
84. Earles SWE and Soar GB (1972), Squeal noise in disk brakes, Symp on Vibration and Noise in Motor Vehicles, Inst of Mech Eng, 61-69.
85. Earles SWE and Chambers PW (1987), Disc brake squeal noise generation: predicting its dependency on system parameters including damping International, J Vehicle Des 8(4-6) 538-552.
86. Eamshaw S (1842), On the nature of the molecular forces which regulate the constitution of the lumiferous ether, Trans Camb Phil Soc 7 97-112.
87. Eckolt W (1920), Über erzwungene Reibungsschwingungen, Zeitschrift fur technische Physik 7 226-232.
88. Engel C (1883) Researches into the Early History of the Violin Family, Novello and Co.
89. Euler L (1765) Theoria motus corporum solidorum seu rigidorum. Supple-mentum: de motu corporum rigidorum a frictione pertubato, Rostock und Greifswald: A F Röse.
90. Feder HJS and Feder J (1991), Self-organized criticality in a stick-slip process, Phys Rev Lett 66 (20) 2669-2672.
91. Feeny BFand Moon FC (1989), Autocorrelation on symbol dynamics for a chaotic dry-friction oscillator, Phys Lett A 141 397-400.
92. Feeny BF (1996), The nonlinear dynamics of oscillators with stick-slip friction, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
93. Feeny BF and Liang J-W (1995), Phase-space reconstructions of stick-slip systems, Proc of 1995 Design Engineering Tech Conf Vol 3A, ASME DE-Vol 84-1, 1049-1060.
94. Feeny BF and Liang J-W (1996), A decrement method for the simultaneous estimation of Coulomb and viscous damping, J Sound Vib 195(1) 149-154
95. Filippov A (1964), Differential equations with discontinuous right-hand sides, Am Math Soc Translations 42, Series 2 199-231.
96. Fokker AD (1941), The rising top, experimental evidence and theory, Physica 8 591-596.
97. Folkman SL, Femey BD, Bingham JG, and Dutson JD (1996), Friction and impact damping in a truss using pinned joints, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
98. Franke J (1882), Über die Abhängigkeit der gleitenden Reibung von der eschwindigkeit, Civil Eng.
99. Galileo G (1638), Dialogues Concerning Two New Sciences, translated by H Crew and A De Salvo, Northwestern Univ Press, Evanston and Chicago, 1946.
100. Galton G (1878), The action on brakes. On the effect of brakes upon railway trains, Engineering 14 June 469-472.
101. Galton G (1878), Railway brakes. On the coefficient of friction from experiments on railway brakes, Engineering 23 Aug 153-154.
102. Gao C and Kuhlmann-Wilsdorf D (1990), On stick-slip and the velocity dependence of friction at low speeds, J Trib 112 354-360.
103. Galvenetto U, Bishop SR, and Briseghella L (1995), Mechanical stick-slip vibrations, Int J Bifurcation Chaos 5(3) 637-651.
104. Gilbert KR (1956), Rope making, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 451-455.
105. Glocker Ch and Pfeiffer F (1992), Dynamical systems with unilateral constraints, Nonlinear Dyn 3 245-259.
106. Glocker C (1995), Dynamik von Starrkörpersystemen mit Reibung und Stößen, Fortschr-Ber VDI 11(176), Düsseldorf.
107. Godfrey D (1967), Vibration reduces metal to metal contact and causes an apparent reduction in friction, ASLE Trans 10 183-192.
108. Gowlett JAJ (1992), Tools - The paleolithic record, The Cambridge Encyclopedia of Human Evolution, Jones S, Martin R, Pilbeam D (eds), Cambridge Univ Press, Cambridge 350-360.
109. Goyal S (1989), Planar Sliding of a rigid body with dry friction: Limit surfaces and dynamics of motion, PhD Thesis, Cornell Univ.
110. Grabec I (1986), Chaos generated by the cutting process Phys Lett A 117(8) 384-386.
111. Greenwood JA (1991), Contact of rough surfaces In: Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer EL and Pollock HM (eds), Nato ASI Series E 220 37-56.
112. Greenwood JA (1991), Problems with surface roughness In: Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer IL and Pollock HM (eds), Nato ASI Series E 220 57-76.
113. Greenwood JA and Tripp JH (1970-1971), The contact of two nominally flat rough surfaces, Procedures Instruction Mech Eng, 185 625-633.
114. Greenwood JA and Williamson JBP (1966), Contact of nominally flat surfaces, Proc Roy Soc A295 300-319.
115. Grudzinski J, Kissing W and Zaplata L (1992), Untersuchung selbsterregter ibungsschwingungen mit Hilfe eines numerischen Simulationsverfahrens, Tech Mech 13(1) 7-14.
116. Guran A (1993), Control of vibration in an elastic cantilevered rod by means of an internal lowing fluid, Proc of 14th CANCAM, Queen's Univ, 569-570.
117. Guran A (1996), Shape control, vibration suppression, and control of divergence instabilities of an elastic rod using flowing fluid as an actuator, Dynamics of Gyroscopic Systems, World Scientific.
118. Guran A and Plaut RH (1993), Destabilization effects of a stiffening support in nonconservative elastomechanics, ZAMM 73(10) 282-283.
119. Guran A, Pfeiffer F, and Popp K, (1996), Dynamics with Friction, World Scientific.
120. Haessig DA and Friedland B (1991), On the modelling and simulation of friction. J Dyn Syst, Meas and Control 113 354-362.
121. Hagedom P (1978), Nichtlineare Schwingungen, Wiesbaden: Akad Ver-lagsges.
122. Halling J and Nuri KA (1991), Elastic/plastic contact of surfaces considering ellipsoidal asperities of work hardening multi-phase materials, Trib Int 24(5)311-319.
123. Harli CK (1983), Reibschwingungen von Schwingern mit oszillierendem Antrieb, Dissertation, TH Aachen, Fak Maschinenwesen
124. Harrison HS (1956), Fire-making, fuel, and lighting, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 216-237.
125. Heller M (1979), The Illustrated Encyclopedia of Ice Skating, Paddington Press Ltd, New York.
126. Helmholtz HLF (1954), On the Sensations of the Tone as a Physiological Basis for the Theory of Music, Dover New York, translation by AJ Ellis of Die Lehre von den Tonempfindungen 4th Edition, 1877; 1st Edition published in 1863.
127. Herrmann G and Jong IC (1965), On the destabilizing effect of damping in nonconservatinve elastic systems, J Appl Mech 32 592-597.
128. Herodotus, The History of Herodotus Vol I, translated by G Rawlinson, EH Blakerey (eds), JM Dent and Sons, London, 1936.
129. Heslot F, Baumberger T, Perrin B, Caroli B and Caroli C, 1994, Creep, stick-slip and dry friction dynamics: Experiments and a heuristic model, Phys Rev E 49(6) 4973-4988.
130. Hess DP and Soom A (1991), Normal vibrations and friction under harmonic loads: Part I: Hertzian contacts J Trib 113 80-86.
131. Hess DP and Soom A (1991), Normal vibrations and friction under harmonic loads: Part II: Rough planar contacts J Trib 113 87-92.
132. Hess DP and Soom A (1992), Normal and angular motions at rough planar contacts during sliding with friction, J Trib 114 567-578.
133. Hess DP and Wagh NJ (1995), Evaluating surface roughness from contact vibrations,-/Trib 117 60-64.
134. Hinrichs N, Oestreich M, Popp K (1996), Coexisting periodic solutions for a nonsmooth friction oscillator, ZAMM 76, 205-206.
135. Hinrichs N, Oestreich M, Popp K (1997a), Dynamics of oscillators with impacts and friction, Chaos Solitons Fractals 8(4) 535-558.
136. Holmes FT (1937), Axial magnetic suspension, Rev Sei Inst 8 444-447.
137. Horowitz FG (1988), Mixed state variable friction laws: some implications for experiments and a stability analysis, Geophys Res Lett 15(11) 1243-1246.
138. Hugenholtz NM (1952), On tops rising by friction, Physica 18 515-527.
139. Hulten J (1995), Some drum brake squeal mechanism, Procedure 1995 Noise Vibration Conference Society of Automotive Engineering 1/2 377-388.
140. Humphreys WJ (1929), Physics of the Air, McGraw-Hill, New York.
141. Hundal MS (1979), Response of a base excited system with Coulomb and viscous friction, J Sound Vib 64(3) 371-378.
142. Ibrahim RA and Soom A (1992), Friction-induced vibration, chatter, squeal, and chaos, Winter Annual Meeting of ASME, DE-Vol 49
143. Ibrahim R (1994), Friction induced vibration, chatter, squeal, and chaos Part II: Dynamics and modeling, Appl Mech Rev 47(7) 227-253.
144. Inaudi JA and Kelly JM (1996), Dynamics of homogeneous frictional systems, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
145. Israechvili J (1991), Intermolecular and Surface Forces, San Diego: Academic Press.
146. Jellett JH (1872), A Treatise on the Theory of Friction, Dublin: Hodges, Foster, and Co.
147. Jenkin F and Ewing JA (1877) On friction between surfaces moving at low speeds, Phil Trans R Soc Lond 167 509-528.
148. Johnson KL (1985) Contact Mechanics, Cambridge Univ Press.
149. Johnson KL (1954), An experimental investigation of the effects of an oscillating tangential force at the interface between elastic bodies in contact, Dissertation, Manchester.
150. Kalker JJ (1972), On elastic line contact, J Appl Mech, Dec 1125-1132.
151. Kalker JJ (1977), Variational principles of contact elastostatics, J Inst Math Appl 20 199-219.
152. Kapoor A, Williams JA and Johnson KL (1994), The steady state sliding of rough surfaces, Wear 175 81-92.
153. Karius D (1980), Experimentelle und theoretische Ermittlung von Reibungskräften bei periodischen Schwingungen, ZAMM 60 58-62.
154. Kauderer H (1958), Nichtlineare Mechanik, Springer-Verlag.
155. Keer LM, Ahmadi N and Mura T (1984), Tangential loading of elastic bodies in contact, Comput Struct 19(1-2) 93-101.
156. Kemp M and Roberts J (1989), Leonardo da Vinci, Yale Univ Press, in association with the South Bank Centre, Amilcare Pizzi SpA Milan.
157. Kim YB and Noah ST (1990), Bifurcation analysis for a modified Jeffcott rotor with bearing clearance, Nonlinear Dyn 1 221-241.
158. Kimball AL (1877) A new investigation on the laws of friction, Am J Sei Arts XIII 353.
159. Kleczka W and Kreuzer E (1995), On approximations of non-smooth functions in bifurcation analysis, Nonlinear Dynamics: The Richard Rand 50th Birthday Volume, A Guran (ed), World Scientific.
160. Klein RG (1994), Southern Africa before the iron age, Integrative Paths to the Past, Carruccini RS and Ciochon RL (eds), Prentice Hall, Englewood Cliffs NJ.
161. Ko PL and Brockley CA (1970), The measurement of friction and friction induced vibration, J Trib, Oct, 543-548.
162. Koura MM and Omar MA (1981), The effect of surface parameters on friction, Wear 73 235-246.
163. Kragelskii IV (1965), Friction and Wear, Washington: Butterworths.
164. Kragelskii TV, Dobotschin MN, and Kombalow WS (1983), Grundlagen zu Reibung und Verschleiß, Berlin: Hanser-Verlag.
165. Krause H and Poll G (1980), Mechanik der Festkörperreibung, VDI-Verlag, Dösseldorf.
166. Lagercrantz S (1954), African Methods of Fire-Making, Almqvist and Wik-sells Boktryckeri AB, Upsala.
167. Laird ER (1955), A notched stick, Am J Phys 23 472-473.
168. Lang AM (1994), An investigation into heavy vehicle drum brake squeal, Dissertation, Loughborough Univ, Fac Philosophy.
169. Leakey LSB (1956), Graphic and plastic art, A History of Technology, Singer C, Holmyard EJ, and Hal AR, (eds), Clarendon Press, 144-153.
170. Leonard RW (1937), An interesting demonstration of the combination of two linear harmonic vibrations to produce a single elliptical vibration, Am Phys Teacher 5 175-176.
171. Leonardo da Vinci, The Notebooks of Leonardo da Vinci, arranged and translated by E MacCurdy, New York, 1939.
172. Li X, Wang Y and Liu J (1991), A study on dry friction of eutectoid steel, Wear 150 59-65.
173. Lorenz H (1924), Lehrbuch der Technischen Physik. Erster Band: Technische Mechanik starrer Gebilde, Verlag von Julius Springer, Berlin.
174. Lorig LJ and Hobbs EB (1990), Numerical modeling of slip instability using the distinct element method with state variable friction laws, Int J Rock Mech Min Scie Geomech Abstr 27(6) 525-534.
175. Lötstedt P (1981), Coulomb friction in two-dimensional rigid body systems, ZAMM 61 605-615.
176. Love AEH (1944), A Treatise on the Mathematical Theory of Elasticity, Dover, New York.
177. Lund A (1952), The Story of Skiing, Eyre and Spottiswoode, London.
178. MacCurdy E (1938) The Notebooks of Leonardo da Vinci, London: John Cape, vols 1,2.
179. Madakason PB (1983), The frictional behaviour of materials, Wear 87 191-206.
180. Magnus K (1986) Schwingungen, Stuttgart: Teubner.
181. Makris N and Constantinou MC (1991), Analysis of motion resisted by friction. I. Constant Coulomb and linear/Coulomb friction, Mech Struct Machines 19(4) 477-500.
182. Marghitu DB and Hürmüzlü, Y (1994), Spatial collisions of kinematic chains with multiple contact points, Proc of ASME ICE, Chicago, DSC-Vol 55-2.
183. Martins JAC, Oden JT and Simoes FMF (1990), A study of static and kinetic friction International, J Eng Sei 28(1) 29-92.
184. Marui E and Kato S (1984), Forced vibration of a base-excited single-degree-of freedom system with Coulomb friction, J Dyn Syst, Meas Control 106 280-285.
185. Matrosov VM (1984), Attraction and stability in discontinuous systems Proc: Colloquia Mathematica Societatis Janos Bolyai 47 Differential Eqs, Qualitative Theory, Szeged (Hungary).
186. Matsuzaki M and Takayasu H (1991), Fractal features of the earthquake phenomenon and a simple mechanical model, J Geophys Res 96(B 12) 19925-19931.
187. McClelland GM and Glosli JN (1991), Friction at the atomic scale, In: Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer IL and Pollock HM (eds), Nato ASI Series E 220 405-426.
188. McNeil I (1990), Introduction: basic tools, devices and mechanisms, An Encyclopaedia of the History of Technology, McNeil I (ed), Routledge, London, 1-40.
189. Mindlin RD (1994), Compliance of elastic bodies in contact, J Appi Mech 16 259-267.
190. Mindlin RD, Mason WP, Osmer JF, and Deresiewicz H (1952), Effects of an oscillating tangential force on the contact surfaces of elastic spheres, 1st US Natl Congress of Appl Mech, Chicago IL, 1995 New York: ASME, 203-208.
191. Mindlin RD and Deresiewicz H (1953), Elasitic spheres in contact under varying oblique forces, J Appi Mech 20 327.
192. Moon FC (1994), Chaotic dynamics and fractals in material removal processes, Nonlinearity and Chaos in Engineering Dynamics, Thompson JMT and Bishop SR (eds), Wiley, 25-38.
193. c superconducting bearings, Appi Phys Lett 56(4) 397-399.
194. Moon FC and Schweitzer G (1994), during a conversation at the conference listed under Schweitzer 1994b.
195. Moreau JJ (1974), On unilateral constraints, friction and plasticity, New Variational Techniques in Mathematical Physics, Capriz G and Stampacela G (eds), Edizioni Cremonese, Roma, 174-322.
196. Moser MA (1987), The response of stick-slip systems to random seismic excitation, Dissertation, Pasadena, California Inst of Tech.
197. Musiol F (1990), Erklärung der Vorgänge in der Kontaktzone von trockenlaufenden Reibpaarungen über gesetzmäßig auftretende Phänomene im Reibprozeß, Dissertation, Inst für Förder- u Getriebetechnik, Tech Univ Berlin.
198. Mottershead J (1995), Vibrations and friction-induced instability in discs, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
199. Müller PC (1995), Calculation of Lyapunov exponents for dynamic systems with discontinuities, Chaos Solitons, Fractals 5(9) 1671-1681.
200. Myers NO (1962), Characterization of surface roughness, Wear 5 182.
201. Nack WV and Joshi AM (1995), Friction induced vibration: Brake moan, SAE paper 951095 127-133.
202. Nakanishi H (1991), Statistical properties of the cellular-automation model for earthquakes, Phys Rev A 43(12) 6613-6621.
203. Narayanan S and Jayaraman K (1991), Chaotic vibrations in a nonlinear oscillator with Coulomb damping, J Sound Vib 146 17-31.
204. Nayak PR (1972), Contact vibrations, J Sound Vib 22(3) 297-322.
205. Newhouse EL (1992), The Builders, National Geographic Society
206. Newton I (1686), Mathematical Principles of Natural Philosophy, translated by A Motte in 1729, reprinted by the Univ of California Press, Berkeley, 1974.
207. Oakley KP (1956), Skill as a human possession, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 1-37.
208. Oakley KP (1961), On man's use of fire, with comments on tool-making and hunting, Social Life of Early Man, Washburn SL (ed), Aldine Publ, Chicago.
209. Oden JT (1989), Progress in the theory and modeling of friction and in the control of dynamical systems with frictional forces, Final technical report, Air force office of scientific research (TR-89-05). Austin: The Computational Mechanics Co.
210. Oden JT and Martins JAC (1985), Models and computational methods for dynamic friction phenomena, Comput Methods Appi Mech Eng 52 527-634.
211. Oden JT and Pires EB (1984), Algorithms and numerical results for finite element approximations of contact problems with non-classical friction laws, Comput Structs 19(1-2) 137-147.
212. Oestreich M, Hinrichs N, and Popp L (1996), Bifurcation and stability analysis fora nonsmooth friction analysis, Arch Appi Mech 66 1-15.
213. Othmann MO and Elkholy AH (1994), Measurements of friction coefficient under reciprocating sliding conditions, Eur J Mech A/Solids 13(2) 215-225.
214. Painlevé M (1895), Sur les Lois du Frottement de Glissement, Comptes Rendus de l’Acadamie des Science 121 112-115.
215. Parent A (1708), Nouvelle statique avec frotements et sons frotements ou regies pour calculer les frotements des machines dans l’etal de 1'equili-bre, Memoires de I' Academic Royale A, (Chez Gerard Kuyper, Amsterdam 1708)
216. Persson BNJ (1996) The physics of sliding friction Adriatico Research Conference, NATO Advanced Research Workshop, ICTP Trieste, Italy, 2023 June 1995.
217. Petroski H (1990) The Pencil: A History of Design and Circumstance, Alfred A Knopf, New York
218. Pfeiffer F (1992), On stick-slip vibrations in machine dynamics, Ing Archiv 54 232-240.
219. Pfeiffer F (1991), Dynamical systems with time-varying or unsteady structure, ZAMM 71 T6-T22.
220. Pfeiffer F and Glocker Ch (1995), Impacts with friction, Proc of 1995 Design Engineering Tech Conf, Vol 3A, ASME DE-Vol. 84-1, 171-180.
221. Pfeiffer F, Wanpenhans H, and Seyfferth W (1995), Dynamics and control of automated assembly processes, Smart Structures, Nonlinear Dynamics, and Control, Guran A and Inman DJ (eds), Prentice Hall, Upper Saddle River NJ.
222. Piggott S (1992), Wagon, Chariot, and Carriage: Symbol and Status in the History of Transport, Thames and Hudson, New York.
223. Plint AG and Plint P. (1985), A new technique for the investigation of stick-slip, Trib Int 18 (4) 247-249.
224. Plumb RC (1972), Squeak, skid and glide: The unusual properties of snow and ice, J Chem Educ 49(3) 179.
225. Polycarpou AA and Soom A (1996), Modeling unsteady lubricated friction, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
226. Polzer G and Meißner F (1982), Grundlagen zu Reibung und Verschleiß, Leibzig.
227. Popp K (1992), Some model problems showing stick-slip motion and chaos, Friction-induced vibration, chatter, squeal, and chaos, RA Ibrahim and A Soom, DE-Vol 49, 1-12.
228. Popp K (1994), Nichtlineare Schwingungen mechanischer Strukturen mit Füge- und Kontaktstellen, ZAMM, 74(3) 147-165.
229. Popp K and Steher P, (1989), Nonlinear oscillations of structures induced by dry friction, IUTAM Symposium on Nonlinear Dynamics in Engineering Systems, Stuttgart.
230. Popp K and Steher P (1990), Stick-slip vibrations and chaos, Philos Trans R Soc London, Ser A, 332 89-105.
231. Popp K, Hinrichs N, and Oestreich M (1996), Analysis of a self-excited friction oscillator with external excitation Dynamics with Friction, Guran A, Pfeiffer F, Popp K (eds), World Scientific.
232. Rabinowicz E (1958), The intrinsic variables affecting the stick-slip process, Proc Phys Soc London 71 668-675.
233. Rabinowicz E (1965), Stick and slip, Sei Am 194 (May) 109.
234. Rabinowicz E (1991), Friction at the atomic scale In: Fundamentals of friction: Macroscopic and Microscopic Processes, Singer IL and Pollock HM (eds), Nato ASI Series E 220 343-349.
235. Ramelli A (1588), The Various and Ingenious Machines of Agostino Ra-melli, reprinted by Dover, New York, 1994; translation and biography by MT Gnudi, with annotations and glossary by ES Ferguson.
236. Rao S (1995), Mechanical Vibrations, Addison-Wesley, Reading MA.
237. Raspoli M (1987), The Cave of Lascaux: the Final Photographs, Harry N Abrams Inc Publ, New York.
238. Rayleigh JWS (1877-78), The Theory of Sound, reprinted by Dover New York 1945.
239. Rice JR and Ruina AL (1983), Stability of steady frictional slipping, J Appl Mech 50 343-349.
240. Rigaud J-P, Brimberg S, and Aujoulat N (1988), Art treasures for the ice age: Lascaux cave, Natl Geographic 174(4) 482-499.
241. Rubin S (1958), in Amature scientist, Stong CL (ed), Sei Am 198 (April) 134-136.
242. Ruina A (1985), Constitutive relations for frictional slip, Mechanics of Geomaterials, Bazant Z (ed), Wiley, 169-187.
243. Ruina AL (1986), Unsteady motions between sliding surfaces, Wear 113 83-86.
244. Sakamoto T, Tanii J, and Tsukizoe T (1980), A friction apparatus for measuring the normal displacement of a sliding body, J Phys E Sci Instrumentation 13 1017-1020.
245. Sakamoto T (1985), Normal displacement of the sliding body in a stick-slip process, Proc ISLE Int Trib Conf, Tokyo 141-146.
246. Sakamoto T (1987), Normal displacement and dynamic friction characteristics in a stick-slip process, Trib Int 20 25-31.
247. Saint-George H (1977), The Bow: It's History, Manufacture, and Use, Longwood Press, Boston.
248. Schelleng J, (1974), The physics of the bowed string, Sci Am 230 Jan, 8795.
249. Schmieg H and Vielsack P (1987), Wechselnde Bindungen in einem Zweikörpersystem mit trockener Reibung, Ing Arch 57,446-458.
250. Schweitzer G, Bleuler H, and Traxler A (1994a), Active Magnetic Bearings, vdf Hochschulverlag AG an der ETH Zürich.
251. Schweitzer G, Siegwart R, and Herzog R, (1994b), Fourth International Symposium on Magnetic Bearings, vdf Hochschulverlag AG an der ETH Zürich.
252. Segner JA (1758), De frictu corporum solidorum in motu constitutorum Dissertation, Univ. Halle.
253. Shaw SW (1986), On the dynamic response of a system with dry friction, J Sound Vib 108 305-325.
254. Sherif HA (1991), Effect of contact stiffness on the establishment of selfexcited vibrations, Wear 141 227-234.
255. Shevitz D and Paden B (1993), Lyapunov stability theory of nonsmooth systems, Advances in Robust and Nonlinear Control Systems, ASME DSC-Vol 53,53-60.
256. Sikora J (1991), On the influence of viscous damping on the properties of mechanical systems, with friction, ZAMM 71(4) 63-66.
257. Sikora J (1992), The behaviour of discrete mechanical systems with different models of friction, ZAMM 72(4) 119-123.
258. Sinopoli A (1996), Analytical methods for rigid body dynamics with friction and unilateral constraints, 6th Conf on Nonlinear Vibrations, Stability, and Dynamics of Structures, Blacksburg, June 9-13.
259. Skare T and Stahl J-E (1992), Static and dynamic friction processes under the influence of external vibrations, Wear 154 177-192.
260. Sleeswyk AW (1982), Form and function in the evolution of the wooden wheel, Explorations in the History of Science and Technology in China Li Guohao, Zhang Mengwen, Cao Tianqin, and Hu DJ (eds), Shanghai Chinese Classics Publ House, 471-503.
261. Slivsgaard E and True H (1994), Chaos in railway-vehicle dynamics, Nonlinearity and Chaos in Engineering Dynamic, Thompson JMT and Bishop SR (eds), Wiley, 183-192.
262. Society of Advancement of Skiing and Outdoor Life in Sweden (1950), Finds of Skis from Prehistorical Times in Swedish Bogs and Marshes, Generalstabens Litografiska Ansalts Forlag, Stockholm, Sweden.
263. Soom A and Chen J-W (1986), Simulation of random surface roughness-induced contact vibrations at Hertzian contacts during steady sliding, J Trib 108 123-127.
264. Soom A and Kim C-H (1981), The measurement of dynamic normal and frictional contact forces during sliding, ASME 81-DET-40
265. Spurr RT (1961), A theory of brake squeal, Proc of Automotive Div, Inst of Mech Eng (AD) 1 33-40.
266. Spragg RC (1972), The measurement of surface texture, Proc Metrology Conf, Glasgow 15
267. Stelter P (1990), Nichtlineare Schwingungen reibungserregter Strukturen, Fortschr Ber VDI, Dosseldorf W 137.
268. Stelter P (1992), Nonlinear vibrations of structures induced by dry friction, Nonlinear Dyn 3 329-345.
269. Stepan G (1991), Chaotic motion of wheels, Vehicle Syst Dyn 20 341-351.
270. Streator JL (1992), Considerations of a simplified analysis of transducer dynamics for measuring friction, J Trib 114 360-368.
271. Swayze JL and Akay A (1992), Effects of systems dynamics on friction-induced oscillations, ASME-WAM: Friction-Induced Vibration, Chatter, Squeal and Chaos, DE-Vol.49 49-55.
272. Takahara H (1973), Sounding mechanism of singing sand, J Acoust Soc Am 53 634.
273. Temple RKG (1986), China: Land of Discovery and Invention, Patrick Stevens, Wellingborough.
274. Timoshenko SP (1953), History of Strength of Materials, McGraw-Hill, reprinted by Dover, New York, 1983.
275. Tolstoi DM (1967), Significance of the normal degree of freedom and natural normal vibrations in contact friction, Wear 10, 199-213.
276. Tondl A (1970), Self-excited vibrations, Monograph 9, Natl Res Inst for Machine Design, Bechovice.
277. Trinkaus E (1992), Evolution of human manipulation, The Cambridge Encyclopedia of Human Evolution, Jones S, Martin R, Pilbean D (eds), Cambridge Univ Press Cambridge, 346-349.
278. Tiizun U and Walon OR (1992), Micromechanical modelling of load-dependent friction in contacts of elastic spheres, J Phys D: Appl Phys 25 44-52.
279. Tworzydlo WW, Becker EB, and Oden JT (1992), Numerical modeling of friction-induced vibrations and dynamics instabilities, Friction-Induced Vibration, Chatter, Squeal, and Chaos, Ibrahim RA and Soom A (eds), ASME DE-Vol. 49, 13-32.
280. Utkin VI (1978), Slinding Modes and Their Application in Variable Structure Systems, Moscow: MIR Publishers.
281. Veits VL, Bundur MS, Khitrik VE, and Shmakov VA (1985), Analysis of patterns of formation of dynamic friction characteristics during interaction with elastic system, Trenie i Iznos 6(4) 653-60.
282. Vitruvius (1960), The Ten Books on Architecture, Dover, New York.
283. Waller MD (1961), Chladni Figures: A Study in Symmetry, G Bell and Sons, London.
284. Walker J (1975), The Flying Circus of Physics, Wiley, New York.
285. Wang C-H and Soom A (1983), Interpretation of rubbing noise radiated from a pin-on-disk configuration, ASME 83-WA-NCA-4 1-6.
286. Wang J-H (1996), The application of a friction damper, Dynamics with Friction, Guran A, Pfeiffer F, and Popp K (eds), World Scientific.
287. Wang M (1995), Untersuchung über hochfrequente Kontaktschwingungen zwischen rauhen Oberflächen, Fortschr-Ber VDI, Düsseldorf, 11217.
288. Watari A (1969), Kikai-rikigaku, Kyouritsu (publisher).
289. Watson C (1991) A finite element analysis of a S cam brake, Dissertation, Loughborough Univ.
290. Weiss M and Elmer FJ (1996), A simple model for wearless friction: The Frenkel-Kontorova-Tomlinson model In: The Physics of Sliding Friction Persson BNJ (ed), Adriatico Research Conf, NATO Adv Res Workshop, ICTP Trieste, Italy, 20-23 June 1995.
291. Wellington AM (1884), Experiments with new apparatus on journal friction at low velocities, Trans ASCE, CCXCV 409-475.
292. Whiteman WE and Ferri AA (1995), Analysis of a nonlinear beam-like structures with displacement-dependent friction forces: Part I Single-degree-of-ffeedom model, Part ü. Multi-degree-of-ffeedom model, Proc of 1995 Design Eng Tech Conf, Vol 3A, ASME DE-Vol 84-1, 1093-1108.
293. Whittaker ET (1936), A Treatise on the Analytical Dynamics of Particles and Rigid Bodies, Dover, New York.
294. Wiercigroch M (1994), A note on the switch function for the stick-slip phenomenon, J Sound Vib 175(5) 700-704.
295. Wojewoda J (1992), Experimental study of a quasiperiodically forced system with dry friction, Dissertation, Univ of Strathclyde.
296. Woo KL and Thomas TR (1980), Contact of rough surfaces: A review of experimental work, Wear 58 331-340.
297. Yamamura S (1976), Magnetic levitation technology of tracked vehicles; present status and prospects, Trans IEEE MAG-12 874-878.
298. Yanik AJ (1996a), "Die first 100 years of transportation safety: Part 1, Automotive Eng 104(1) 33-37.
299. Yanik AJ (1996b), The first 100 years of transportation safety: Part 2, Automotive Eng 104(2) 59-64.
300. Zeuner FE (1956), Domestication of animals, A History of Technology, Singer C, Holmyard EJ, and Hall AR (eds), Clarendon Press, 327-352.
301. Zhang J, Moslehy FA and Rice SL (1991), A model for friction in quasisteady-state sliding, Wear 149 1-25.
302. Zhou S (1983), Various types of carriages: The south-pointing carriage and odometer, Ancient China's Technology and Science Institute of the History of Natural Sciences, Chinese Acad of Sei Foreign Language Press, Beijing, 429-435.
303. Zhukovskii ne (1948), Equilibrium condition for a rigid body resting on a fixed plane with some area of contact, and capable of moving along the plane with friction, Collected Works, Vol 1: General Mechanics, Gostekhizdat, Moscow-Leningrad, 339-354, in Russian.
304. Ziegler H (1952), Die Stabilitätskriterien der Elastomechanik, Ing Arch 20 49-56.