Science-based prognosis to manage structural alloy performance in hydrogen

Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials

Volumn , Issue , 2009, Pages 1-21

  Gangloff, Richard P ^a  

^a University of Virginia   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVE LOADING; CRACK GROWTH; DE-COHESION; ENERGY SYSTEMS; EXPERIMENTAL CALIBRATION; FRACTURE PROCESS ZONE; HIGH CONCENTRATION; HYDROGEN ENVIRONMENT-ASSISTED CRACKINGS; HYDROGEN PRESSURES; HYDROSTATIC STRESS; LABORATORY TEST; LOADING FREQUENCIES; MATERIAL PROPERTY; OVERPOTENTIAL; QUANTITATIVE MODELS; STRUCTURAL ALLOYS; UNCERTAIN PARAMETERS;

CRACK TIPS; CRACKING (CHEMICAL); FRACTURE MECHANICS; STRESS ANALYSIS; UNCERTAINTY ANALYSIS;

HYDROGEN;

EID: 73449125925     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (60)

1. R.P. Gangloff, in Environment Induced Cracking of Materials, Sergei Shipilov et al., eds., Elsevier Science, Oxford, UK, pp. 141-166 (2007).
2. R.P. Gangloff, in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie and B. Karihaloo, eds., Vol. 6, Elsevier Science, New York, NY, pp. 31-101 (2003).
3. R.P. Gangloff, in Environment Induced Cracking of Metals, R.P. Gangloff and M.B. Ives, eds., NACE, Houston, TX, pp. 55-109 (1990).
4. Technical Reference on Hydrogen Compatibility of Materials, C. San Machi and B.P. Somerday, eds., Sandia National Laboratory, Livermore, CA (2007).
5. A.M. Al-Rumaih, Measurement and Modeling of Temperature Dependent Hydrogen Embrittlement of Cr-Mo Steel to Enable Fitness-for-Service Modeling, PhD Dissertation, University of Virginia, Charlottesville, VA (2004).
6. R.P. Gangloff, in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody et al. eds., TMS, Warrendale, PA, pp. 477-497 (2003).
7. S. Serebrinsky et al., Mech. Phys. Sol., Vol. 52, pp. 2403-2430 (2004).
8. I. Scheider et al., Engr. Frac. Mech., Vol. 75, pp. 4283-4291 (2008).
9. R.P. Wei and R.P. Gangloff, in Fracture Mechanics: Perspectives and Directions, ASTM STP 1020, R.P. Wei and R.P. Gangloff, eds., ASTM International, West Conshohocken, PA, pp. 233-264 (1989).
10. Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody et al. eds., TMS, Warrendale, PA (2003).
11. Materials Damage Prognosis, J.M. Larsen et al., eds., Materials Science and Technology, Vol. 04, TMS, Warrendale, PA (2004).
12. th ICAF Symposium, Naples, Italy (2007).
13. M. Kresten and K.-F Windgassen, in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, pp. 987-995 (1981).
14. E.J. Veseley et al., in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody et al. eds., TMS, Warrendale, PA, pp. 424-441 (2003).
15. nd edition, R.W. Revie, ed., John Wiley and Sons, NY, NY, pp. 27-84 (2000).
16. Basic Research Needs for the Hydrogen Economy, Report of the Basic Energy Sciences Workshop, US DOE, Washington, DC (2004).
17. M.D. Rana et al., "Technical Basis and Application of New Rules on Fracture Control of High Pressure Hydrogen Vessel in ASME Section VIII, Division 3 Code", PVP2007-26023, ASME, NY, NY (2007).
18. R.P. Gangloff, in Corrosion Prevention and Control, 33rd Sagamore Army Materials Research Conference, M. Levy and S. Isserow, eds., US Army Laboratory Command, Watertown, MA, pp. 64-111 (1986).
19. S.L. Robinson and R.E. Stoltz, in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, pp. 987-995 (1981).
20. W.R. Hoover et al., "Hydrogen Compatibility of Structural Materials for Energy Storage and Transmission", Final Report SAND81-8006, Sandia National Laboratories, Livermore, CA (1981).
21. L. Coudreuse et al., in Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, MPC, NY, NY, pp. 759-767 (1994).
22. W. Dietzel and M. Pluff, in Hydrogen Transport and Cracking in Metals, A. Turnbull, ed., Institute of Materials, London, UK, pp. 77-86 (1995).
23. R.J. Walter and W.T. Chandler, in Effect of Hydrogen on Behavior of Materials, A.W. Thompson and I.M. Bernstein, eds., TMS, Warrendale, PA, pp. 273-286 (1976).
24. T.R. Fabis et al., in Environment-Sensitive Fracture: Evaluation and Comparison of Test Methods, ASTM STP 821, S.W. Dean et al., eds., ASTM International, West Conshohocken, PA, pp. 470-483 (1984).
25. L.W. Tsay et al., Corrosion Science, Vol. 50, pp. 2973-2980 (2008).
26. G. Schuster and C. Altstetter, Metall. Trans. A, Vol. 14A, pp. 2085-2090 (1983).
27. S. Suresh and R.O. Ritchie, Metal Science, Vol. 16, pp. 529-538 (1982).
28. C.A. Hippsley, "Hydrogen and Temper Embrittlement Interactions in Fatigue of 2 1/4Cr-1Mo Steel", Harwell Laboratory Report AERE R 12322, Oxon, UK (1986).
29. A. Hagihara et al., Key Engineering Materials, Vols. 353-358, pp. 174-177 (2007).
30. S. Suresh et al., Fatg. Frac. Engr. Matls. Struc., Vol. 5, pp. 133-150 (1982).
31. A.W. Loginow and E.H. Phelps, Corrosion, Vol 31, pp. 404-412 (1975).
32. B.P. Somerday and C. San Marchi, in Materials for the Hydrogen Economy, R.H. Jones and G.J. Thomas, eds., Taylor and Francis Group, Boca Raton, FL, pp. 157-179 (2008).
33. J.P. Hirth, Metall. Trans. A, Vol. 11A, pp. 861-890 (1980).
34. R.A. Oriani, Acta Metall., Vol. 18, pp. 147-157 (1970).
35. J.A. Lillard, Environment Assisted Cracking of a Nickel-Based Superalloy in Hydrogen-Producing Solutions, PhD Dissertation, University of Virginia, Charlottesville, VA (1998).
36. N.R. Moody et al., Engr. Frac. Mech., Vol. 68, pp. 731-750 (2001).
37. A. Turnbull, Corrosion, Vol. 57, pp. 175-189 (2001).
38. H.H. Johnson and A.M. Willner, App. Matls. Res., Vol. 4, pp. 34-43 (1965).
39. R.P. Gangloff, in Basic Questions in Fatigue, Vol. 2, ASTM STP 924, R.P. Wei and R.P. Gangloff, eds., ASTM International, West Conshohocken, PA, pp. 230-251 (1988).
40. R.P. Gangloff and R.P. Wei, Metall. Trans. A, Vol. 8A, pp. 1043-1053 (1977).
41. J.D. Frandsen and H.L. Marcus, Metall. Trans. A, Vol. 8A, pp. 265-272 (1977).
42. N.R. Moody et al., Res. Mech., Vol. 30, pp. 143-206 (1990).
43. A. Taha and P. Sofronis, Engr. Frac. Mech., Vol. 68, pp. 803-837 (2001).
44. N. Katz et al. Engr. Frac. Mech., Vol. 68, pp. 619-646 (2001).
45. Y. Lee and R.P. Gangloff, Metall. Mater. Trans. A, Vol. 38A, pp. 2174-2190 (2007).
46. R.A. Oriani and P.H. Josephic, Acta Metall., Vol. 25, pp. 979-988 (1977).
47. C.J. McMahon, Jr., Engr. Frac. Mech., Vol. 68, pp. 773-788 (2001).
48. X.-Y Liu et al., Matls. Sci. Engr. A, Vol. 492, pp. 218-220 (2008).
49. R.L.S. Thomas et al., Metall. Mater. Trans. A, Vol. 34A, pp. 327-344 (2003).
50. Uday Komaragiri et al., J. Mech. Phys. Sol., Vol. 56, pp. 3527-3540 (2008).
51. M. Lu et al., Metall. Trans. A, Vol. 12A, pp. 805-811 (1981).
52. X. Chen and W.W. Gerberich, Metall. Trans. A, Vol. 22A, pp. 59-70 (1991).
53. Y.J. Ro et al., Matls. Sci. and Engr. A, Vol. 435-436, pp. 333-334 (2006).
54. V.S. Despande et al., Acta Mater., Vol. 51, pp. 1-15 (2003).
55. R. Sunder, Fatg. Frac. Engr. Mater. Struct., Vol. 28, pp. 289-300 (2005).
56. K. Sadananda and A.K. Vasudevan, Intl. J. Fatg., Vol. 26, pp. 39-47 (2004).
57. R.P. Gangloff, in Fatigue '02, Anders Blom, ed., Engineering Materials Advisory Services, West Midlands, UK, pp. 3401-3433 (2002).
58. Z. Gasem and R.P. Gangloff, in Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking, R.H. Jones, ed., TMS, Warrendale, PA, pp. 501-521 (2001).
59. R. Krishnamurthy et al., in Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson, eds., TMS, Warrendale, PA, pp. 891-908 (1990).
60. R. Krishnamurthy, Microstructure and Yield Strength Effects on Hydrogen Environment Fatigue of Steels, PhD Dissertation, University of Virginia, Charlottesville, VA (1991).