Measurement and modeling of hydrogen environment-assisted cracking of ultra-high-strength steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 38 A, Issue 13, 2007, Pages 2174-2190

  Lee, Yongwon ^a   Gangloff, Richard P ^a  

^a University of Virginia   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGE HARDENING; CRACK PROPAGATION; CRACKING (CHEMICAL); MARTENSITE; MATHEMATICAL MODELS; SODIUM CHLORIDE; STRESS CORROSION CRACKING;

CRACK-TIP ACIDIFICATION; HYDROGEN ENVIRONMENT-ASSISTED CRACKING (HEAC); TRANSGRANULAR CRACK PATH;

STEEL;

EID: 34548716402     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-9051-z     Document Type: Conference Paper

References (91)

1. A.R. Troiano: Trans. ASM, 1960, vol. 52, pp. 54-80
2. R.A. Oriani and P.H. Josephic: Acta Metall., 1974, vol. 22, pp. 1065-74
3. R.A. Oriani and P.H. Josephic: Acta Metall., 1977, vol. 25, pp. 979-88
4. W.W. Gerberich, Y.T. Chen and C. St. John: Metall. Trans. A, 1975, vol. 6A, pp. 1485-98
5. N. Bandyopadhyay, J. Kameda and C.J. McMahon Jr.: Metall. Trans. A, 1983, vol. 14A, pp. 881-88
6. W.W. Gerberich, T. Livne, X.-F. Chen and M. Kaczorowski: Metall. Trans. A, 1988, vol. 19A, pp. 1319-34
7. C.J. McMahon Jr.: Eng. Fract. Mech., 2001, vol. 68, pp. 773-88
8. D. Symons: Eng. Fract. Mech., 2001, vol. 68, pp. 751-71
9. R.L.S. Thomas, J.R. Scully and R.P. Gangloff: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 327-44
10. Richard P. Gangloff: Comprehensive Structural Integrity-Environmentally Assisted Failure, Elsevier Ltd., Oxford, United Kingdom, 2003, pp. 31-101
11. R.P. Gangloff: Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, TMS, Warrendale, PA, 2003, pp. 477-97
12. R.A. Page and W.W. Gerberich: Metall. Trans. A, 1982, vol. 13A, pp. 305-11
13. C.D. Beachem: Metall. Trans., 1972, vol. 3, pp. 437-51
14. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861-90
15. Y. Takeda and C.J. McMahon Jr.: Metall. Trans. A, 1981, vol. 12A, pp. 1255-66
16. M. Gao and R.P. Wei: Metall. Trans. A, 1985, vol. 16A, pp. 2039-50
17. S.P. Lynch: Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, TMS, Warrendale, PA, 2003, pp. 449-66
18. R.P. Gangloff and A. Turnbull: Modeling Environmental Effects on Crack Initiation and Propagation, TMS, Warrendale, PA, 1986, pp. 55-81
19. M.G.H. Wells: Key Eng. Mater., 1993, vol. 77-78, pp. 71-80
20. G.B. Olson: Adv. Mater. Processes, 1997, vol. pp. 72-9
21. R. Ayer and P.M. Machmeier: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1943-55
22. R. Ayer and P.M. Machmeier: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2510-17
23. Choong Hwa Yoo, Hyuck Mo Lee, Jin W. Chan and J.W. Morris Jr.: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3466-72
24. R. Ayer and P.M. Machmeier: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 903-05
25. E.U. Lee: Report No. NAWCADWAR-94001-60, Naval Air Warfare Center, Warminster, PA, 1993
26. E.U. Lee: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1313-16
27. A. Oehlert and A. Atrens: J. Mater. Sci., 1998, vol. 33, pp. 775-81
28. P.F. Buckley, R. Brown, J.H. Graves, E.U. Lee, C.E. Neu and J. Kozol: Metallic Materials for Lightweight Applications-Proc. 40th Sagamore Army Materials Research Conf., United States Army Laboratory Command, Watertown, MA, 1993. pp. 449-64
29. E.U. Lee, H. Sanders, and B. Sarkar: Tri-Service Conf. on Corrosion, United States Army Research Laboratory, Aberdeen, MD, 2000
30. J. Kozol and C.E. Neu: Report No. NAWCADWAR-92018-60, Naval Air Warfare Center, Warminster, PA, 1992
31. B.F. Brown: Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, National Association of Corrosion Engineers, Houston, TX, 1977, pp. 747-50
32. A. Turnbull: Corrosion, 2001, vol. 57, pp. 175-89
33. B.E. Placzakis and J.H. Beatty: Proc. of the Tri-Service Conference on Corrosion, vol. I, LaQue Corrosion Services, Wrightsville Beach, NC, 1997, pp. 7.18-7.32
34. J.R. Scully, B.A. Kehler, Yongwon Lee and R.P. Gangloff: Tri-Service Corrosion Conf., NACE, Orlando, FL, 2005
35. M.A. Jakab and J.R. Scully: Nat. Mater., 2005, vol. 4, pp. 667-70
36. D.P. Dautovich and S. Floreen: Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, National Association of Corrosion Engineers, Houston, TX, 1977, pp. 798-815
37. W. Dietzel and K. Ghosal: Fatigue Fract. Eng. Mater. Struct., 1998, vol. 21, pp. 1279-86
38. 2005 Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2003, vol. 3.01, pp. 1004-15
39. W.G. Clark and J.D. Landes: Stress Corrosion-New Approaches, ASTM STP 610, ASTM International, West Conshohocken, PA, 1976, pp. 108-27
40. B.P. Somerday, L.M. Young and R.P. Gangloff: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 39-58
41. R.A. Oriani: Fundamental Aspects of Stress Corrosion Cracking, NACE, Houston, TX, 1969, pp. 32-50
42. B.G. Ateya and H.W. Pickering: J. Electrochem. Soc., 1975, vol. 122, pp. 1018-26
43. H.W. Pickering: Corr. Sci., 1989, vol. 29, pp. 325-41
44. James M. Dahl: Adv. Mater. Processes, 2000, vol 157, pp. 33-36
45. R.P. Gangloff and R.P. Wei: Small Fatigue Cracks, TMS, Warrendale, PA, 1986, pp. 239-64
46. R.P Gangloff: Environment Induced Cracking of Metals, Elsevier Science, Oxford, United Kingdom, 2007, in press
47. Y. Katz, N. Tymiak and W.W. Gerberich: Eng. Fract. Mech., 2001, vol. 68, pp. 619-46
48. U. Komaragiri: University of Virginia, Charlottesville, VA, unpublished research, 2006.
49. F.G. Wei, T. Hara and K. Tsuzaki: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 587-97
50. F.G. Wei and K. Tsuzaki: Scripta Mater., 2005, vol. 52, pp. 467-72
51. F.G. Wei and K. Tsuzaki: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 331-53
52. G.M. Pressouyre: Metall. Trans. A, 1983, vol. 14A, pp. 2189-93
53. B.G. Pound: Acta Metall., 1998, vol. 46, pp. 5733-43
54. R.A. Oriani: Acta Metall., 1970, vol. 18, pp. 147-57
55. G.M. Pressouyre and I.M. Bernstein: Metall. Trans. A, 1978, vol. 9A, pp. 1571-80
56. S. Hinotani, Y. Ohmori and F. Terasaki: Mater. Sci. Eng., 1985, vol. 76, pp. 57-69
57. A. Turnbull, M.W. Carroll and D.H. Ferriss: Acta Metall., 1989, vol. 37, pp. 2039-46
58. R.L.S. Thomas, D. Li, R.P. Gangloff and J.R. Scully: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1991-2004
59. D. Li, R.P. Gangloff and J.R. Scully: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 849-64
60. G.M. Pressouyre: Acta Metall., 1980, vol. 28, pp. 895-911
61. B.G. Pound: Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, TMS, Warrendale, PA, 2003, pp. 93-103
62. M. Wang, E. Akiyama and K. Tsuzaki: Corr. Sci., 2006, vol. 48, pp. 2189-202
63. H.H. Johnson: Mater. Res. Stand., 1965, vol. 5, pp. 442-45
64. M.J. Haynes and R.P. Gangloff: J. Test. Eval., 1997, vol. 25, pp. 82-98
65. R.P. Gangloff, D.C. Slavik, R.S. Piascik and R.H. Van Stone: Small-Crack Test Methods, ASTM STP 1149, ASTM, Philadelphia, PA, 1992, pp. 116-68
66. H. Tada, P.C. Paris and G.R. Irwin: The Stress Analysis of Cracks Handbook, Paris Productions Incorporated, St. Louis, MO, 1985, pp. 2.10-2.12
67. B. Force and H.W. Pickering: J. Mater., 1995, vol. 47, pp. 22-27
68. P.K. Subramanyan: Comprehensive Treatise of Electrochemistry, Electrochemical Materials Science, Plenum Press, New York, NY, 1981, vol. 4, pp. 411-62
69. A. Turnbull, D.H. Ferriss and H. Anzai: Mater. Sci. Eng. A, 1996, vol. 206, pp. 1-13
70. T.Y. Zhang, H. Sheu and J.E. Hack: Scripta Metall. Mater., 1992, vol. 27, pp. 1605-10
71. T.Y. Zhang and J.E. Hack: Metall. Mater. Trans. A, 1999, vol. 30A, p. 155-59
72. K.N. Akhurst and T.J. Baker: Metall. Trans. A, 1981, vol. 12A, pp. 1059-70
73. Yueguang Wei and J.W. Hutchinson: J. Mech. Phys. Solid., 1997, vol. 45, pp. 1253-73
74. H. Jiang, Y. Huang, Z. Zhuang and K.C. Hwang: J. Mech. Phys. Solid., 2001, vol. 49, pp. 979-93
75. Z. Gao and J.W. Morris Jr.: Scripta Metall., 2005, vol. 53, pp. 933-36
76. Y.H. Kim, H.J. Kim and J.W. Morris Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 1157-64
77. R.O. Ritchie, M.H. Castro Cedeno, V.F. Zackay, and E.R. Parker: Metall. Trans. A, 1978, vol. 9A, pp. 35-40
78. G.B. Olson: Innovations in Ultrahigh Strength Steel Technology, 34th Sagamore Army Materials Research Conf., United Kingdom Army Laboratory Command, Watertown, MA, 1987, pp. 3-66
79. J.I. Kim and J.W. Morris Jr.: Metall. Trans. A, 1980, vol. 12A, pp. 1957-63
80. A. Szummer: Hydrogen Degradation of Ferrous Alloys, Noyes Publications, Park Ridge, NJ, 1985, pp. 512-34
81. G.M. Pressouyre: Hydrogen Effects in Metals, TMS, Warrendale, PA, 1981, pp. 27-36
82. R.P. Wei and R.P. Gangloff: Fracture Mechanics: Perspectives and Directions, ASTM STP 1020, ASTM, Philadelphia, PA, 1989, pp. 233-64
83. W.W. Gerberich, T. Livne and X. Chen: Modeling Environmental Effects on Crack Growth Processes, TMS, Warrendale, PA, 1985, pp. 243-57
84. J. Toribio and V. Kharin: Int. J. Fract., 1997, vol. 88, pp. 233-45
85. M.M. Hall and D.M. Symons: Chemistry and Electrochemistry of Stress Corrosion Cracking, TMS, Warrendale, PA, 2001, pp. 447-66
86. W.W. Gerberich, P.G. Marsh and J.W. Hoehn: Hydrogen Effects in Metals, TMS, Warrendale, PA, 1996, pp. 539-53
87. P. Doig and G.T. Jones: Metall. Trans. A, 1977, vol. 8A, pp. 1993-98
88. A.J. Kumnick and H.H. Johnson: Metall. Trans., 1974, vol. 5, pp. 1199-1206
89. I.W. Kang, S.I. Pyun and K.T. Kim: Scripta Metall., 1989, vol. 23, pp. 223-26
90. T.L. Anderson: Fracture Mechanics, 3rd ed., CRC Press, Boca Raton, FL, 2004, pp. 104 and 121-23.
91. S. Serebrinsky, E.A. Carter and M. Ortiz: J. Mech. Phys. Sol., 2004, vol. 52, pp. 2403-30