Fatigue as a process of cyclic brittle microfracture

Fatigue and Fracture of Engineering Materials and Structures

Volumn 28, Issue 3, 2005, Pages 289-300

  Sunder, R ^a  

^a BiSS Research   (India)

Author keywords

Diffusion; Environment; Fatigue crack growth; Residual stress; Retardation; Surface chemistry

Indexed keywords

ADSORPTION; BRITTLE FRACTURE; CHEMISORPTION; CRACK PROPAGATION; DIFFUSION; DUCTILITY; MATHEMATICAL MODELS; METALS; RESIDUAL STRESSES; SURFACE CHEMISTRY; VACUUM;

BRITTLE MICROFRACTURE; CUMMULATIVE DIFFUSION; LOCAL SEQUENCE SENSITIVITY; STRESS-STRAIN HYSTERESIS;

FATIGUE OF MATERIALS;

EID: 14544275901     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2005.00857.x     Document Type: Article

References (42)

1. Bullen, W. P., Head, A. K. and Wood, W. A. (1953) Structural changes during the fatigue of metals. Proc. R. Soc. A 216, 332.
2. Laird, C. (1978) Mechanisms and Theories of Fatigue, Fatigue and Microstructure. ASM, Metals Park, pp. 149-204.
3. Pelloux, R. M. N. (1970) Crack extension by alternating shear. Engng Fract. Mech. 1, 697-704.
4. Kiuo, A. S. and Liu, H. W. (1976) An analysis of the unzipping model for fatigue crack growth. Script. Metall. 10, 723-728.
5. Atkinson, J. D. and Yu, J. (1997) The role of dynamic strain-ageing in the environment assisted cracking observed in pressure vessel steels. Fatigue Fract. Engng Mater. Struct. 20, 1-12.
6. Bika, D. and McMahon, C.J. (1992) A kinetic model for dynamic embrittlement. Phys. Stat. Sol. 131, 639-649.
7. Goldstein, R. V. and Balueva, A. V. (1997) A model for the behaviour of materials with cracks under hydrogen embrittlement conditions. Fatigue Fract. Engng Mater. Struct. 20, 1269-1277.
8. Ostberg, G. (1998) A commentary on the role of nitrogen in enhancing slow crack growth in C-Mn steel. Fatigue Fract. Engng Mater. Struct. 21, 913-918.
9. Callister, W. D. (1991) An Introduction to Materials Science and Engineering. John Wiley & Sons, New York, NY, USA, pp. 97-107.
10. Fritz, J. D., Parks, B. W. and Pickering, H. W. (1990) Coherency Stress and Transgranular Stress Corrosion Cracking of Cu-18Au Alloy. ASTM STP 1049. ASTM, Philadelphia, pp. 76-85.
11. Flanagan, W. F., Lee, J. B., Massinon, D., Zhu, M. and Lichter, B. D. (1990) Role of Selective Dissolution in Transgranular Stress Corrosion Cracking: Studies of Transient and Steady-State Dealloying in Copper-Gold Alloys. ASTM STP 1049,. ASTM, Philadelphia, pp. 86-99.
12. Vogelesang, L. B. and Schijve, J. (1979) Environmental Effects on Fatigue Failure Mode Transition Observed in Aluminium Alloys. Delft University of Technology, Report LR-289, Delft, the Netherlands.
13. Schijve, J. and Arkema, W.J. (1976) Crack Closure and the Environmental Effect on Fatigue Crack Growth. Delft University of Technology, Aerospace Engineering Report VTH-217, Delft.
14. Tien, J. K., Thompson, A. W., Bernstein, I. M. and Richards, R. J. (1976) Metall. Trans. A 7, 821-829.
15. Albrecht, J., Bernstein, I. M. and Thompson, A. W. (1982) Evidence for dislocation transport of hydrogen in aluminium, metallurgical transactions. Metall. Trans. A 13, 811-820.
16. Shulte, K., Nowack, H. and Lutjering, G. (1990) Environmentally Induced Fatigue Crack Propagation Under Variations in the Loading Conditions. (Edited by W. B. Lisagor T W. Crooker and B. N. Leis). ASTM STP 1049. American Society for Testing and Materials, Philadelphia, pp. 347-373.
17. Bowles, C. Q. (1978) Ph.D. Thesis 'The Role of Environment, Frequency and Wave Shape Dueing Fatigue Crack Growth of Aluminum Alloys'. Report LR-270, Delft University of Technology, Delft.
18. Snowden, K. U. (1964) The effect of atmosphere on the fatigue of lead. Acta Metall. 12, 295-303.
19. Bradshaw, F.J. and Wheeler, C. (1966) Appl. Mat. Res., 112-120.
20. Lynch, S. P. (1988) Environmentally-assisted cracking: Overview of evidence for an adsorption-induced localized-slip process. Acta Metall. 36, 2639-2661.
21. Pao, P. S., Gao, M. and Wei, R. P. (1988) Critical Assessment of the Model for Environmentally-Assisted Fatigue Crack Growth, (Edited by R. P. Wei, R. P. Gangloff). ASTM-STP 924. pp. 182-195.
22. Petit, J., Henaff, G. and Sarrazin-Baudoux, C. (2000) Mechanisms and Modeling of Near-Threshold Fatigue Crack Propagation, Fatigue Crack Growth Thresholds, Endurance Limits and Design, (Edited by J. C. Newman, Jr. and R. S. Piascik). ASTM STP 1372American Society for Testing and Materials, West Conshohocken, PA.
23. Gsell, M., Jakob, P. and Menzel, D. (1998) Effect of substrate strain on adsorption. Science 280, 717-720.
24. de la Figuera, J., Carter, C. B., Bartelt, N. C. and Hwang, R. Q (2003) Interplay between gas adsorption and dislocation structure on a metal surface. Surf. Sci. 531, 29-38.
25. Elber, W. (1970) Fatigue crack closure under cyclic tension. Engineering Fracture Mechanics. Vol. 2, pp. 37-45.
26. Beachem, C. D. (1972) A new model for hydrogen-assisted cracking. Met. Trans. 3, 437-451.
27. Zhang, J. Z. (2000) A shear band decohesion model for small fatigue crack growth in an ultra-fine grain aluminum alloy. EFM 65, 665-681.
28. Gach, E. and Pippan, R. (2001) Cyclic crack tip deformation - The influence of environment. In: Proceedings of Tenth International Conference on Fracture, Paper ICF100420OR.
29. Sunder, R., Porter, W.J. and Ashbaugh, N. E. (2002) Fatigue voids and their significance. Fatigue Fract. Engng Mater. Struct. 25, 1015-1024.
30. Sunder, R., Porter, W. J. and Ashbaugh, N. E. (2003) The role of air in fatigue load interaction. Fatigue Fract. Engng Mater. Struct. 26, 1-16.
31. Ashbaugh, N. E., Porter, W. J., Rosenberger, A. H. and Sunder, R. (2002) Environment -related load history effects in elevated temperature fatigue of a nickel-base super-alloy. In: Proceedings of Fatigue 2002 Stockholm.
32. Sunder, R. (2002) An explanation for the residual stress effect in metal fatigue. In: Fatigue 2002 - Proceedings of eighth International Fatigue Congress. Stockholm, EMAS, pp. 3339-3350.
33. Sunder, R. (2004) Effect of periodic overloads on fatigue thresholds in Al-alloys. Fatigue Fracture Mechanics (Edited by S. R. Daniewicz, J. C. Newman, K. H. Schwalbe). Vol. 34. ASTM 1461 ASTM International, West Conshohocken, PA (to appear).
34. Sunder, R. (2004) Fractographic reassessment of the significance of fatigue crack closure. Fatigue and Fracture Mechanics. (Edited by S. R. Daniewicz, J. C. Newman, K.-H. Schwalbe). ASTM 1461. ASTM International, West Conshohocken, PAVol. 34 (to appear).
35. Morrow, J. (1968) Fatigue properties of metals. Fatigue Design Handbook. Section 3.2, Society of Automotive Engineering.
36. Gassner, E. (1939) Festigkeitsversuche mit wiederholter Beansprunchung im Flugzeugbau. Deautsche Luftwacht, Ausgabe Luftwissen.
37. Wetzel, R. M. (1971) Ph.D. Thesis 'A Method for Fatigue Damage Analysis'. Department of Civil Engineering, University of Waterloo. Ontario, Canada.
38. Neuber, H. (1937) Kerbspanmungslehre. Springer, Berlin.
39. Wheeler, O. E. (Match 1972) Spectrum loading and crack growth. J. Basic Engng Trans. ASME, pp. 181-186.
40. Willenborg, J. D., Engle, R. M. and Wood, H. A. (1971) A Crack Growth Retardation Model Using an Effective Stress Concept. AFFDL-TM-FBR-71-1. Air Force Flight Dynamics Laboratory, WP-AFB, OH.
41. Lang, M. (2000) A model for fatigue crack growth. Part I: Phenomenology. Fatigue Fract. Engng Mater. Struct. 23, 587-601.
42. Schijve, J. (1976) Observations on the Prediction of Fatigue Crack Growth Propagation under Variable Amplitude Loading, ASTM STP 595. American Society for Testing and Materials, Philadelphia, pp. 3-23.